Why are objects measured?​

Answer:

I am pretty sure it is C

Explanation:

It can be found all over the universe

Answer:

the frequency of this mode of vibration is 138.87 Hz

Explanation:

Given;

length of the copper wire, L = 1 m

mass per unit length of the copper wire, μ = 0.0014 kg/m

tension on the wire, T = 27 N

number of segments, n = 2

The frequency of this mode of vibration is calculated as;

[tex]F_n = \frac{n}{2L} \sqrt{\frac{T}{\mu} } \\\\F_2 = \frac{2}{2\times 1} \sqrt{\frac{27}{0.0014} }\\\\F_2 = 138.87 \ Hz[/tex]

Therefore, the frequency of this mode of vibration is 138.87 Hz

Answer:

3.464 seconds.

Explanation:

We know that we can write the period (the time for a complete swing) of a pendulum as:

[tex]T = 2*\pi*\sqrt{\frac{L}{g} }[/tex]

Where:

[tex]\pi = 3.14[/tex]

L is the length of the pendulum

g is the gravitational acceleration:

g = 9.8m/s^2

We know that the original period is of 2.00 s, then:

T = 2.00s

We can solve that for L, the original length:

[tex]2.00s = 2*3.14*\sqrt{\frac{L}{9.8m/s^2} }\\\\\frac{2s}{2*3.14} = \sqrt{\frac{L}{9.8m/s^2}}\\\\(\frac{2s}{2*3.14})^2*9.8m/s^2 = L = 0.994m[/tex]

So if we triple the length of the pendulum, we will have:

L' = 3*0.994m = 2.982m

The new period will be:

[tex]T = 2*3.14*\sqrt{\frac{2.982m}{9.8 m/s^2} } = 3.464s[/tex]

The new period will be 3.464 seconds.

Answer:

h = 2755102 m = 2755.102 km

Explanation:

According to the given condition:

Potential Energy = Energy Consumed by Bulb

[tex]mgh = Pt\\\\h = \frac{Pt}{mg}[/tex]

where,

h = height = ?

P = Power of bulb = 75 W

t = time = (2 h)(3600 s/1 h) = 7200 s

m = mass of bulb = 20 g = 0.02 kg

g = acceleration due to gravity = 9.8 m/s²

Therefore,

[tex]h = \frac{(75\ W)(7200\ s)}{(0.02\ kg)(9.8\ m/s^2)}[/tex]

h = 2755102 m = 2755.102 km

Answer:

The maximum height risen by the bullet-baseball system after the collision is 81.76 m.

Explanation:

Given;

mass of the bullet, m₁ = 0.033 kg

mass of the baseball, m₂ = 0.15 kg

initial velocity of the bullet, u₁ = 222 m/s

initial velocity of the baseball, u₂ = 0

let the common final velocity of the system after collision = v

Apply the principle of conservation of linear momentum to determine the common final velocity.

m₁u₁  +  m₂u₂  = v(m₁  + m₂)

0.033 x 222   +  0.15 x 0     = v(0.033 + 0.15)

7.326  =  v(0.183)

v = 7.326 / 0.183

v = 40.03 m/s

Let the height risen by the system after collision = h

Initial velocity of the system after collision = Vi = 40.03 m/s

At maximum height, the final velocity, Vf = 0

acceleration due to gravity for upward motion, g = -9.8 m/s²

[tex]v_f^2 = v_i^2 +2gh\\\\0 = 40.03^2 - (2\times 9.8)h\\\\19.6h = 1602.4\\\\h = \frac{1602.4}{19.6} \\\\h = 81.76 \ m[/tex]

Therefore, the maximum height risen by the bullet-baseball system after the collision is 81.76 m.

Answer:

The length of his shadow is decreasing at a rate of 1.13 m/s

Explanation:

The ray of light hitting the ground forms a right angled triangle of height H, which is the height of the building and width, D which is the distance of the tip of the shadow from the building.

Also, the height of the man, h which is parallel to H forms a right-angled triangle of width, L which is the length of the shadow.

By similar triangles,

H/D = h/L

L = hD/H

Also, when the man is 4 m from the building, the length of his shadow is L = D - 4

So, D - 4 = hD/H

H(D - 4) = hD

H = hD/(D - 4)

Since h = 2 m and D = 12 m,

H = 2 m × 12 m/(12 m - 4 m)

H = 24 m²/8 m

H = 3 m

Since L = hD/H

and h and H are constant, differentiating L with respect to time, we have

dL/dt = d(hD/H)/dt

dL/dt = h(dD/dt)/H

Now dD/dt = velocity(speed) of man = -1.7 m/s ( negative since he is moving towards the building in the negative x - direction)

Since h = 2 m and H = 3 m,

dL/dt = h(dD/dt)/H

dL/dt = 2 m(-1.7 m/s)/3 m

dL/dt = -3.4/3 m/s

dL/dt = -1.13 m/s

So, the length of his shadow is decreasing at a rate of 1.13 m/s

Answer:

Option (A) is correct.

Explanation:

A horizontal rope has a length of 5 m and a mass of 0.00145 kg. If a pulse occurs on this string, generating a wavelength of 0.6 m and a frequency of 120 Hz. The tension to which the string is subjected is

mass of string, m = 0.00145 kg

Frequency, f = 120 Hz

wavelength = 0.6 m

Speed = frequency x wavelength

speed = 120 x 0.6 = 72 m/s

Let the tension is T.

Use the formula

[tex]v =\sqrt\frac{T L}{m}\\\\72 = \sqrt\frac{T\times 5}{0.00145}\\\\T = 1.5 N[/tex]

Option (A) is correct.

Answer:

B . energy cannot be created or destroyed

Let m be the mass of the second car, so the first car's mass is 2m.

Let K be the kinetic energy of the second car, so the first car's kinetic energy would be K/2.

Let u and v be the speeds of the first car and the second car, respectively. At the start,

• the first car has kinetic energy

K/2 = 1/2 (2m) u ² = mu ²   ==>   K = 2mu ²

• the second car starts with kinetic energy

K = 1/2 mv ²

It follows that

2mu ² = 1/2 mv ²

==>   4u ² = v ²

When their speeds are both increased by 2.76 m/s,

• the first car now has kinetic energy

1/2 (2m) (u + 2.76 m/s)² = m (u + 2.76 m/s)²

• the second car now has kinetic energy

1/2 m (v + 2.76 m/s)²

These two kinetic energies are equal, so

m (u + 2.76 m/s)² = 1/2 m (v + 2.76 m/s)²

==>   2 (u + 2.76 m/s)² = (v + 2.76 m/s)²

Solving the equations in bold gives u ≈ 1.95 m/s and v ≈ 3.90 m/s.

Answer:

Explanation:

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Power output = volts x amps

Power output = 170 volts x 0.1 amps

Power output = 18 watts

Answer: The statement that is not an example of convection is (A person gets a suntan on a beach).

Explanation:

There are different modes of heat energy transfer which includes:

--> conduction

--> Radiation and

--> Convection

CONVECTION is a process by which heat energy is transferred in a fluid or air by the actual movement of the heated molecules. The cooler portion of the air surrounding a warmer part exerts a buoyant force on it. As the warmer part of the air moves, it is replaced by cooler air that is subsequently warmed.

Convection in gases is very common and gas expands more than liquid when subjected to high temperature.

--> it is used in bringing about the circulation of fresh air in the room in a process known as ventilation.Here, cool air is constantly being replaced with denser air ( warm air).

-->An electric heater warms a room and Smoke rises above a fire are typical example of convection in gases.

-->Spaghetti is cooked in water: As the water close to the burner warms, it rises to the top and boils. At the same time, cooler water on top moves downward to replace the rising hot water.

--> also the eagle uses convection current to stay afloat in the sky without flapping its wings to conserve energy.

But the option (A person gets a suntan on a beach) is an example of heat transfer through radiation. This is because the sun emits it's rays from the sky down to earth without any material medium unlike others. Therefore, this option is the ODD one out.

Answer:

  r ’= 4 r

Explanation:

Electric potential energy is

          U = [tex]k \frac{q_1q_2}{r_{12}}[/tex]k q1q2 / r12

in this exercise

          q₁ = q₂ = q

          U = k q² / r

for when the charge change

           U ’= k q’² / r’

indicate that

      q ’= 2q

      U ’= U

we substitute

           U = k (2q) ² / r ’

           U = 4 k q² / r ’

we substitute

           [tex]k \ \frac{q^2}{r} = 4 k \ \frac{q^2}{r'}[/tex]k q² / r = 4 k q² / r ’

           r ’= 4 r

Answer:

Answer to the following question is as follows;

Explanation:

The puck's real altitude is lower than ones projection. That's because the mechanism may not be completely frictionless. Electricity is nevertheless wasted owing to particle interactions such as friction, which might explain why the present the results is lower than predicted.

Answer:

answer here

Explanation:

the unit of work is fundamental unit because it doesn't depend on other units.

__________________

Thx

Answer:

The SI unit of work is joule (J)

Explanation:

Joule is a derived unit. ∴ unit of work is a derived unit

Phytochemicals are compounds that are produced by plants ("phyto" means "plant"). They are found in fruits, vegetables, grains, beans, and other plants. Some of these phytochemicals are believed to protect cells from damage that could lead to cancer.

Answer:

The average force exerted on the car is 590.12 N.

Explanation:

Given that,

The power generated, P = 22 hp = 16405.4 W

Speed of the car, v = 100 km/h = 27.8 m/s

We need to find the average force exerted on the car due to friction and air resistance.

We know that,

Power, P = F v

Where

F is force exerted on the car

[tex]F=\dfrac{P}{v}\\\\F=\dfrac{16405.4}{27.8}\\\\F=590.12\ N[/tex]

So, the average force exerted on the car is 590.12 N.

Answer:

n × t_1/2

Exmplanation:

The age of meteorite is calculated by multiplying it's quantity n with the half life . This means that the formula is for age of this meteorite is;

Age of meteorite= n × t_1/2

where;

n = quantity of the meteorite

t_/2 = half life of the meteorite

Thus:

The correct formula is; n × t_1/2

Yes. Because it opposes the law of friction

I hope this helps.

Explanation:

Please mark me brainliest

Answer:

Elevator That Is Moving Downwards At A Constant Speed Of 4.9 M/S. What Is The Magnitude Of The Net Force Acing On The Student?

This problem has been solved!

This problem has been solved!See the answer

This problem has been solved!See the answerA student weighs 1200N. They are standing in an elevator that is moving downwards at a constant speed of 4.9 m/s. What is the magnitude of the net force acing on the student?

Explanation:

use this R= m(g-a), where R = reaction = weight, m= mass, a= acceleration and g= acceleration due to gravity

Answer:

The arrow will bury itself farther by 3S₁

Explanation:

lets assume; the Arrow shot by me has a speed twice the speed of the arrow fired by the younger shooter

Given that ; acceleration is constant , Frictional force is constant

                    A₂ =   A₁

Vf²₂ - Vi²₂ / 2s₂  = Vf₁² - Vi₁² / 2s₁ ---- ( 1 )

final velocities = 0

Initial velocities : Vi₂ = 2(Vi₁ )

Back to equation 1

0 - (2Vi₁ )² / 2s₂ =  0 - Vi₁² / 2s₁

hence :

s₂ = 4s₁

hence the Arrow shot by me will burry itself farther by :

s₂ - s₁ = 3s₁

Note :  S1 = distance travelled by the arrow shot by the younger shooter

Answer:

The impact force is 98000 N.

Explanation:

mass = 10 tons

The impact force is the weight of the object.

Weight =mass x gravity

W = 10 x 1000 x 9.8

W = 98000 N

The impact force is 98000 N.

Answer:

The intensity of 4 lawn movers is 86 dB.

Explanation:

Intensity of one lawnmower = 80 dB

Let the intensity is I.

Use the formula of intensity

[tex]dB = 10 log\left ( \frac{I}{Io} \right )\\\\80=10log\left ( \frac{I}{Io} \right )\\\\10^8 = \frac{I}{10^{-12}}\\\\I = 10^{-4} W/m^2[/tex]

Now the intensity of 4 lawn movers is

[tex]dB = 10 log\left ( \frac{4I}{Io} \right )\\\\dB=10log\left ( \frac{4\times10^{-4}}{10^{-12}} \right )\\\\dB = 86 dB\\[/tex]

Answer:

K = 0 J

Explanation:

Given that,

The mass of the particle, m = 1.2 mg

The speed of the particle, [tex]v=1.62\times 10\ cm/h[/tex]

We need to find the kinetic energy of the particle at time t = 0 s.

At t = 0 s, the particle is at rest, v = 0

So,

[tex]K=\dfrac{1}{2}mv^2[/tex]

If v = 0,

[tex]K=0\ J[/tex]

So, the kinetic energy of the particle at time t = 0 s is 0 J.

Answer:

 E = 2,964 10⁻¹⁹ J

Explanation:

The energy of the photons is given by the Planck relation

          E = h f

the speed of light is related to wavelength and frequency

          c = λ f

we substitute

          E = h c /λ

let's reduce the magnitude to the SI system

          λ = 671 nm = 671 10⁻⁹ m

let's calculate

          E = 6.63 10⁻³⁴ 3 10⁸ /671 10⁻⁹

          E = 2,964 10⁻¹⁹ J

Answer:

A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).

Answer:

 μ = 0.15

Explanation:

Let's start by using Hooke's law to find the force applied to the block

          F = k x

          F = 87.0 0.065

          F = 5.655 N

Now we use the translational equilibrium relation since the block has no acceleration

          ∑ F = 0

          F -fr = 0

          F = fr

the expression for the friction force is

          fr = μ N

if we write Newton's second law for the y-axis

          N -W = 0

          N = W = mg

we substitute

          F = μ mg

          μ = F / mg

          μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]

          μ = 0.15

Answer:

Riley's reasoning is correct

Explanation:

Her reasoning is correct because as the ball moves upwards, the acceleration due to gravity would be vertical and in downward position. Therefore at all points as the ball moves, the velocity of the ball is going to change in magnitude as well as in direction. given that the direction keeps changing at certain points, the angle made by the initial velocity just as the ball left the surface would also have to continuously change.

If Riley has to wait for this ball to move some inches before she uses the protractor to measure the angle, the angle of travel would have to change.

Therefore there is going to be discrepancies between the measured angle and the predicted angle. The predicted is the angle of velocity with the horizontal just as this ball moves from the surface.

Answer:

Time

Explanation:

The answer to the question is actually time. Time is not needed when you calculate the mass or volume of an object, a square, sphere, rectangle, or any other 3D shape. You must also calculate the length to know what numbers you will be multiplying by. The answer to the question is time.

Answer:

A) v_{f1} = -3.2 m / s,  B) LEFT , C) v_{f2} = -0.12 m / s,  D) LEFT

Explanation:

This is a collision exercise that can be solved using momentum conservation, for this we define a system formed by gliders, so that the forces during the collision are internal and the moment is conserved.

Let's use the subscript 1 for the lightest glider m1 = 0.160 kg and vo1 = 0.820 m / s

subscript 2 for the heaviest glider me² = 0.820 kg and vo2 = -2.27 m / s

Initial instant. Before the crash

          p₀ = m₁ v₀₁ + m₂ v₀₂

Final moment. After the crash

          p_f = m₁ v_{f1} + m₂ v_{f2}

          p₀ = p_f

          m₁ v₀₁ + m₂ v₀₂ = m₁ v_{f1} + m₂ v_{f2}

 as the shock is elastic, energy is conserved

         K₀ = K_f

         ½ m₁ v₀₁² + ½ m₂ v₀₂² = ½ m₁ [tex]v_{f1}^2[/tex] + ½ m₂ [tex]v_{f2}^2[/tex]

         m₁ (v₀₁² - v_{f1}²) = m₂ (v_{f2}² -v₀₂²)

let's make the relationship

         (a + b) (a-b) = a² -b²

         m₁ (v₀₁ + v_{f1}) (v₀₁-v+{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

let's write our two equations

         m₁ (v₀₁ -v_{f1}) = m₂ (v_(f2) - v₀₂)                                  (1)

         m₁ (v₀₁ + v_{f1}) (v₀₁-v_{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

we solve

         v₀₁ + v_{f2} = v_{f2} + v₀₂

we substitute in equation 1 and obtain

         M = m₁ + m₂

         [tex]v_{f1} = \frac{m_1-m_2}{M} v_o_1 + 2 \frac{m_2}{M} v_f_2[/tex]

         [tex]v_f_2 = \frac{2m_1}{M} v_o_1 + \frac{m_2-m_1}{M} v_o_2[/tex]vf2 = 2m1 / mm vo1 + m2-m1 / mm vo2

we calculate the values

         m₁ + m₂ = 0.160 +0.3000 = 0.46 kg

         v_{f1} = [tex]\frac{ 0.160 -0.300} {0.460} \ 0.820 + \frac{2 \ 0300}{0.460} \ (-2.27)[/tex]

         v_{f1} = -0,250 - 2,961

          v_{f1} = - 3,211 m / s

         v_{f2} = [tex]\frac{2 \ 0.160}{0.460} \ 0.820 + \frac{0.300 - 0.160}{0.460 } \ (-2.27)[/tex]

         v_{f2} = 0.570 - 0.6909

         v_{f2} = -0.12 m / s

now we can answer the different questions

A) v_{f1} = -3.2 m / s

B) the negative sign indicates that it moves to the left

C) v_{f2} = -0.12 m / s

D) the negative sign indicates that it moves to the LEFT