balancing skeleton equation can someone help me with this
When any chemical equation is not balanced then that is known as skeletal chemical equation. We need to balance it because as we know that mass can neither be created nor be distroyed and also the number of atoms on the reactant side should always be equal to the compounds on the product side .
Solvent: Will give brainliest
Answer:
Solvent is 1.00 liter of water.
Answer:
It would be the water i think rlly srry if im wrong thats just what i got
Explanation:
because a solvent would be the one dissolving
Hydrofluoric acid is what type of acid?
Hydrofluoric acid is a solution of hydrogen fluoride (HF) in water. Solutions of HF are colourless, acidic and highly corrosive. It is used to make most fluorine-containing compounds; examples include the commonly used pharmaceutical antidepressant medication fluoxetine (Prozac) and the material PTFE (Teflon).
What is the random mixing of gas molecules called?
O A. Volume
O B. Temperature
C. Diffusion
O D. Pressure
Answer:
C. Diffusion
Explanation:
just did
A bottle of hydrogen peroxide that eventually turns into a bottle of water and oxygen gas is an example of a
How many grams are there in 4.30 x 10²⁶ molecules of H₂SO₄?
Mass of H₂SO₄ : 69,972 g
Further explanationA mole is a number of particles(atoms, molecules, ions) in a substance
This refers to the atomic total of the 12 gr C-12 which is equal to 6.02.10²³, so 1 mole = 6.02.10²³ particles
Can be formulated :
N = n x No
N = number of particles
n = mol
No = 6.02.10²³ = Avogadro's number
moles of H₂SO₄ :
[tex]\tt mol=\dfrac{N}{No}\\\\mol=\dfrac{4.3\times 10^{26}}{6.02\times 10^{23}}\\\\mol=7.14\times 10^2[/tex]
mass H₂SO₄ (MW=98 g/mol) :
[tex]\tt mass=mol\times MW\\\\mass=7.14.10^2\times 98\\\\mass=69,972~g[/tex]
Helpppppppppppppppppppppp
How many liters of water are needed to dissolve 75.0 grams of NaOH to prepare a 1.00-M solution?
Answer:
About 500
Explanation:
Bc i used my calc
Among the groups of elements listed below, which have the same number of electrons in their outermost energy levels? C, K, Ca, Rb, Sr
Na,Mg,AI,S
Li,B,C,F
F,CI,Br,I
Answer:
i believe its d
Explanation:
Answer:
I checked and I too think its D
Which of the following properties would a substance that has metallic bonding
normally have?
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Answer:
I, II, III,IV
Explanation:
Metals are known to possess metallic bonds. In a metallic bond, electro-positive metals loose electrons which form a cloud of electrons which exerts an attractive force on the positive metallic ions. This attractive force holds the metal atoms together in the crystal lattice.
The physical properties of metals include;
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Hence, substances that exhibit properties I-IV are metals and have metallic bonds.
The following properties which a substance that has metallic bonding
normally have include
thermal conductivityelectrical conductivitymalleabilityductilityMetals are elements which have metallic bonding which is always strong as
it helps to form a lattice.
Metals are good conductors of heat and electric current , they can also be
bent in to different shapes . This means it has all the properties listed above.
Read more on https://brainly.com/question/20248759
Which forms of energy are released by a burning candle? (2 points) a Light energy and chemical energy b Light energy and heat energy c Heat energy and electrical energy d Mechanical energy and heat energy
Answer:
light and chemical energy
Explanation: mark me brainliest please
GIVING BRAINLIEST!
Please define the following in your own words:
law of conservation of matter
Answer:
No new matter can be created, and no matter can be destroyed. Matter can only change in state or chemical composition. The amount of mass before the change will equal the amount after the change.
Explanation:
How many electrons can fit in the sixth energy level
Answer:
72 electrons
Explanation:
The 6th shell could hold up to 2(6)² = 2(36) = 72 electrons
Lithium
Which statement about lithium describes what makes lithium very reactive?
F.
The number of neutrons in the nucleus.
G
The number of electrons in the first energy level.
H.
The number of protons in the nucleus.
J.
The number of electrons in the last energy level.
Answer:f
Explanation:
How many grams of carbon are in 300 g of glucose
The atomic number of Arsenic (As) is 33 and the average atomic mass is 74.92 amu. A neutral arsenic atom will have protons
Given :
The atomic number of Arsenic (As) is 33.
The average atomic mass is 74.92 amu.
To Find :
A neutral arsenic atom will have protons.
Solution :
We know, atomic mass is the sum of number of protons and neutrons.
Also, atomic number is the number of protons present in an atom.
Therefore, a neutral arsenic atom will have 33 protons.
*BRAINLIEST BRAINLIEST
Which wavelength would have the highest energy?
670 nanometers
1.3x10^-10 meters
5.3x10^-8 meters
1.5x10^-3 meters
Answer:
THE 3 third one
Explanation:
how many double bonds are in the lewis structure for carbon dioxide, CO2 ?
Answer:
the answer is two double bonds
Hi can anyone help Mehh ! :D
Answer: Renewable becuase the trees can be cut and then replanted.
Explanation:
Non-Renewable resources are resources that cannot be replenished easily through natural process. These are the sources which are used in wise manner so that they do not get depleted. For example: coal, petroleum etc.
Renewable resources are resources that can be replenished overtime through natural process.These are the sources which never depletes completely. For example: bio mass energy, solar energy etc.
As trees can be replenished easily through natural process but it takes a long time for it to occur, it is a renewable source.
What is this plzzzzz helppp tyvmmmm
how many moles of oxygen molecules can be produced from 6 moles of lead oxide
Answer:
Moles of oxygen molecules produced = 3 mol
Explanation:
Given data:
Moles of oxygen molecules produced = ?
Number of moles of lead oxide decomposed = 6 mol
Solution:
Chemical equation:
2PbO₂ → 2PbO + O₂
Now we will compare the moles of oxygen and lead oxide.
PbO₂ : O₂
2 : 1
6 : 1/2×6 =3 mol
three moles of oxygen molecules are produced.
find the odd one out of --retina,cochlea,ciliary muscles,cornea
Answer:
cochlea
Explanation:
Sieving is a technique used to separate mixtures containing solid particles of
(a) small sizes
(b) large sizes
(c) the same sizes
(d) different sizes
it can be be be be be ebe be e e
which CHEMICAL REACTION IS FASTEST
Answer:
b. bread turns brown in the toaster
Answer:
B
Explanation:
Bread turns brown in a toaster really fast. But with the other stuff it takes forever.
What is the energy of a photon that emits a light of frequency 7.21 x 1014 Hz? A. 4.78 x 10-19 J B. 2.76 x 10-19 C. 1.0910-19 J D. 4.16 x 10-19 J
Answer:
E = 4.78×10^−19 J
Explanation:
The chemical equation for the energy of a photon is given by:
E =hν , where h is the Planck constant and ν is the frequency.
E =hν = 6.626×10^−34 Js × 7.21×10^ 14
s−1 = 4.78 × 10^−19 J
Answer:
A. 4.78 x 10-19 J
Explanation:
A P E X
Which of the following best describes the relationship between the speed of sound and the type of medium?
A.
Sound travels slower in air because of the large distance between air particles
B.
Sound travels slower in solids because of the small distance between solid particles
C.
Sound travels slower in air because of the small distance between air particles
D.
Sound travels slower in solids because of the large distance between solid particles
Answer:
A. Sound travels slower in air because of the large distance between air particles
Explanation:
Sound is a mechanical wave that requires a medium for its propagation. Without a medium, sound cannot go through easily or readily. This implies that sound cannot be propagated through a vacuum.
A vacuum is an empty space without any particles in side. Sound waves travel fastest the most in solids because the particles are dense and close to one another. The speed of sound in air is the least because of the large distance between air particles. Therefore, the speed of sound is medium dependentWhat can we do with even more scientific knowledge?
Explanation:
Scientific knowledge allows us to develop new technologies, solve practical problems, and make informed decisions, both individually and collectively.
Answer:
If we had more scientific knowledge, we would be able to increase the productivity of life-saving equipment that provides a longer life for us
be able to make more sensible and informed decisions
make more achievements in studies and be more accurate etc..
Hope this helps<3
Under which conditions does a real gas behave most like an ideal gas? A. At low temperatures and high pressures B. At low temperatures and low pressures C. At high temperatures and high pressures D. At high temperatures and low pressures
Answer: D. At high temperatures and low pressures
Explanation:
At low temperature and high pressure, the kinetic energy of gas molecules is negligible and molecules will have negligible forces of attraction. So real gases will behave least like an ideal gas under such conditions.
At high temperature and low pressure, energy due to intermolecular forces becomes less important in comparison to the kinetic energy of particles. The size of molecules also become less significant than the empty space between the gas molecules. So real gases behave in a similar manner to ideal gases at high temperature and low pressure.
Diamonds are formed when carbon is placed under extreme heat and pressure. This process
in caves
in the ocean
In the atmosphere of Earth
beneath the surface of Earth,
Answer:
beneath the surface of Earth
Explanation:
Diamonds are made up of carbon that has been placed under extreme heat and pressure conditions.
These conditions of high pressure and temperature can only be found within the subsurface. As you go deeper to the mantle, the geothermal gradient rises significantly.
Also, the overburden pressure will also be high.
These processes can also occur on other planets and some can be associated to the earth times when the earth was being formed.
The condition at which diamond forms confers some of the distinct natural properties that typifies it.
Uranium-232 has a half-life of 68.8 years. After 344.0 years, how much uranium-232 will remain from a 375.0-g sample?
Uranium-232 will remain 11.72 g
Further explanationThe atomic nucleus can experience decay into 2 particles or more due to the instability of its atomic nucleus.
Usually radioactive elements have an unstable atomic nucleus.
The main particles are emitted by radioactive elements so that they generally decay are alpha (α), beta (β) and gamma (γ) particles
General formulas used in decay:
[tex]\large{\boxed{\bold{N_t=N_0(\dfrac{1}{2})^{T/t\frac{1}{2} }}}[/tex]
T = duration of decay
t 1/2 = half-life
N₀ = the number of initial radioactive atoms
Nt = the number of radioactive atoms left after decaying during T time
t 1/2 = half-life = 68.8 years
T = duration of decay = 344 years
No= initial sample = 375 g
Uranium-232 remain :
[tex]\tt Nt=375.\dfrac{1}{2}^{344/68.8}\\\\Nt=375.\dfrac{1}{2}^5\\\\Nt=11.72~g[/tex]
