Answer:
The water (the substance) that passes through the filter paper is called the filtrate. If your mixture is a solution, such as salty water, then filtering will not separate the salt from the water. Instead, by heating the soluton the solvent (water) evaporates leaving the solid (salt) behind.
Explanation:
PLeas hurry
Which of the following matches a human action with its impact?
Construction of dam : Scarcity of water for animals
Use of fertilizers : Increase in the population of aquatic animals
Decrease in honeybee population : Increase in plant population
Construction of roads : Improvement in quality of water in local lakes
Answer:
construction aka A
Explanation:
got 100
Determine the number of valence electrons for each of the following:
O
Cs
Ca
Se2-
Na+
C
N
Al
He
Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing
Answer:
I would say C.)
Explanation:
Freezing and condensation are both ways that heat is let out from an object.
A student increases the temperature of a 673 cm^3 balloon from 275 K to 460 K.
Assuming constant pressure, what should the new volume of the balloon be?
Round your answer to one decimal place.
Answer:
1125.75 cm³
Explanation:
We are given;
Initial volume; V1 = 673 cm³
Initial temperature; T1 = 275 K
Final temperature; T2 = 460 K
From Charles law, we can find the new volume from;
V1/T1 = V2/T2
V2 = (V1 × T2)/T1
V2 = (673 × 460)/275
V2 = 1125.75 cm³
why are cells small?
Answer:
you know what i really dont know but imagine if they were huge
Explanation:
Calculate the volume, at STP, of a 0.950 g sample of Carbon Monoxide gas, CO.
Answer:
0.76L is the pressure of CO at STP
Explanation:
To solve this question we must use combined gas law:
PV = nRT
Where P is the pressure of the gas (1atm at STP)
V is volume (Our incognite)
n are moles of the gas (0.950g * (1mol/28g) = 0.034 moles
R is gas constant (0.082atmL/molK)
T is absolute temperature (273.15K at STP)
V = nRT/P
V = 0.034mol*0.082atmL/molK*273.15K / 1atm
V = 0.76L is the pressure of CO at STP
A 2.5 L container holds a sample of hydrogen gas at 291 K and 180 kPa.
If the pressure increases to 350 kPa and the volume remains constant, what will the new temperature be?
Round your answer to one decimal place.
Answer:
The new temperature will be 565.83 K.
Explanation:
Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.
In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:
[tex]\frac{P}{T} =k[/tex]
When an ideal gas goes from a state 1 to a state 2, it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 180 kPaT1= 291 KP2= 350 kPaT2= ?Replacing:
[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]
Solving:
[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]
T2= 565.83 K
The new temperature will be 565.83 K.
Radio waves are used to transmit information on various channels. What is the wavelength of a radio wave having the frequency of 5.40 × 1010 Hz?
1. Analyze the Problem
ν = and c = Unknown: λ =
You know that because radio waves are part of the electromagnetic spectrum, their speed, frequency, and wavelength are related by the formula c = λν.
Answer:
5.56×10¯³ m
Explanation:
From the question given above, the following data were obtained:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
The velocity of electromagnetic wave, frequency and wavelength are related according to the equation:
Velocity (c) = wavelength (λ) × frequency (v)
c = λv
With the above formula, the wavelength of the radio wave can be obtained as follow:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
Velocity (c) = 3×10⁸ m/s
c = λv
3×10⁸ = λ × 5.4×10¹⁰
Divide both side by 5.4×10¹⁰
λ = 3×10⁸ / 5.4×10¹⁰
λ = 5.56×10¯³ m
Thus, wavelength of the radio wave is 5.56×10¯³ m
What is the name of the ionic compound with the formula:
AlF3
Answer:
potassium chloride.
For species that reproduce asexually, all their offspring are
A. genetically identical
B. genetically different
C. almost identical
D. slightly different
Answer:
A. genetically identical
Explanation:
Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent. A single individual can produce offspring asexually and large numbers of offspring can be produced quickly
All the offspring that are produced in the process are genetically identical.
When we talk about this mode of reproduction, we talk about a mode of reproduction in which an organism reproduces without the fusion of gametes. This occurs essentially by cell division.
When this occur, there is no crossing of genetic material as such, all the offspring that are produced in the process are genetically identical.
Learn more about reproduction:https://brainly.com/question/1301963
_____ are bits and pieces of material that end up in a body of water.
Answer:
sediments
Explanation:
Complete the following sentence: In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the ______ reactant.
Answer:
excess reactant
Explanation:
The excess reactant is the reactant in a chemical reaction with a greater amount than necessary to react completely with the limiting reactant. It is the reactant(s) that remain after a chemical reaction has reached equilibrium.
In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the limiting reactant which decides the yield of the reaction.
What is limiting reactant ?In a reaction, all the reactants have to be in correct stoichiometry to complete the reaction. To achieve the mole ratio of the reactants is very much important for the completion of a reaction.
If a reactant is insufficient in amount, then the reaction will stop as soon as this reactant is consumed. Hence, this reactant determine the yield of the product. This reactant which is not in correct stoichiometry for the complete reaction is called the limiting reactant.
The reactant which is excess in quantity thus does not have a role in the yield of the reaction is called the excess reactant. Whatever, the concentration of this reactant in extra, the reaction does not proceed after the consumption of limiting reactant.
Find more on limiting reactant :
https://brainly.com/question/14225536
#SPJ2
How to calculate the number of molecules in 18g of H2O
We, know molecular mass of water is, M = 16 g/mol .
Given mass of water, m = 18 g.
We know, number of moles is given by :
[tex]n = \dfrac{18\ g}{16 \ g/mol}\\\\n = 1.125\ moles[/tex]
Now, 1 mole of any compound contains 6.022 × 10²³ molecules.
So, number of moles in 1.125 moles of water is 1.125 × 6.022 × 10²³ =
6.77 × 10²³ molecules.
Hence, this is the required solution.
tps://hosted 149....
Welcome
(2/1) Double -replacement chemical reactions (Lesson for 2/1) ☆ C
Cools Add-ons Help Accessibility Last edit was 4 minutes ago
Arial
B I VA
5 15 E
11
+
ext
Q26. Aqueous sodium oxalate (C204)2- and aqueous lead (II) nitrate react to product solid
lead (II) oxalate and aqueous sodium nitrate.
3.
I need Balanced chemical equations
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
Further explanationGiven
Word equation
Required
Balanced equation
Solution
Convert to skeleton equation
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + NaNO₃(aq)
Balanced equation
Give a coefficient
Na₂C₂O₄(aq) + aPb(NO₃)₂⇒bPbC₂O₄(s) + cNaNO₃(aq)
Make an equation
C, left = 2, right =2b⇒2b=2⇒b=1
Na, left = 2, right = c⇒c=2
O, left = 4+6a, right = 4b+3c⇒4+6a=4b+3c⇒4+6a=4.1+3.2⇒6a=6⇒a=1
The equation becomes :
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
Need help balancing equations please.
Answer:
A, 4,3,2
B, 1,1,2
C, 1,1,1,2
6. A father rabbit had long ears while the mother rabbit had short ears. Which of these statements
explains why one of the baby bunnies could have long ears?
a
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Those genes connect together to make its ears long.
b
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Just like its father's genes, those genes instruct for proteins that connect in
ways that make its ears long.
С
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. That gene combination instructs for proteins that connect in ways that
make long ears.
d
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. Those genes connect together to make its long ears.
Answer:
D if I’m correct
Explanation:
5. Solve the following crossword puzzle.
a. Maximum energy generation in India is done using ........ energy.
b. energy is a renewablesource of
energy.
c.Solar energy can be called.... energy.
e. ......... energy of water in dams is used for generation of electricity.
Answer:
I think it is b
Explanation:
Which job title describes a person with a career in green energy?
Answer:
Natural resource professional
Explanation:
The job title that describes a person with a career in green energy is a hydroelectric technician. The correct option is c.
What is green energy?Green energy is renewable energy and these energies are produced by renewable resources. Renewable resources are the resources that will not be reduced, and these natural resources are present, and these energies can reproduce again by these resources.
The hydroelectric technician is the person who checks the technical problems of a hydroelectric power plant. Hydroelectricity is produced by water.
This is a renewable resource, and it does not produce any kind of pollution, So a hydroelectric technician will be a job title that describes a person with a career in green energy.
Therefore, the correct option is c., hydroelectric technician.
To learn more about renewable energy, refer to the link:
https://brainly.com/question/17373437
#SPJ2
The question is incomplete. Your most probably complete question is given below:
Elevator installer
sewing machine operator
hydroelectric technician
animal trainer
Was Dalton's Atomic Theory correct or incorrect and why?
Answer:
The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions. ... According to Dalton, atoms of different elements combine in simple whole number ratios to form compounds.
what’s the correct answer !!
Answer:
From my side the correct option is "A"
Explanation: Reasons for its correction are ,
1) Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.
2)Small size: Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.
if you had a block square that weighed 5.00 grams what would be the length of each side
Answer:
[tex]l = 0.793[/tex] cm
Explanation:
Let us assume the density of block square [tex]10[/tex] g/cm³
As we know
Volume = [tex]\frac{Mass}{Density}[/tex]
Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]
As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]
[tex]l^3 = 0.5[/tex]
[tex]l = 0.793[/tex] cm
What is the charge of an electron?
PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?
Deposition
Erosion
Weathering
Plate tectonics
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Some items, such as rubber, float on the water, while some items, such as gold, sink in
the water. If an item floats is it more or less dense than the water?
Answer:
If an item is less dense, it floats on the water.
Explanation:
We know this since the more dense something it usually is heavier than if it was less dense. Which ways it down resulting to it sinking.
Visible light is a part of what spectrum
Answer:
Visible Spectrum/Electromagnetic spectrum
Explanation:
The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.
How many moles of H₂O can be produced when 5.5 moles of CO₂ is produced? C₂H₄ + 3 O₂ --> 2 CO₂ + 2 H₂O
Answer:
5.5 mol H2O
Explanation:
Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.
A 5.0 g sample of metal was heated to a temperature of 100.0 °C then placed into a calorimeter containing 35 mL of water at 20.0°C.
The final temperature was 26.5°C What is the specific heat capacity of the metal?
The specific heat capacity of the metal : c = 2.59 J/g °C
Further explanationGiven
5 g sample
35 ml water = 35 g
Required
The specific heat capacity of the metal
Solution
Heat can be formulated :
Q = m.c.Δt
Q in = Q out
Q absorbed = Q released
Q water = Q metal
35 g x 4.184 J/g °C x (26.5-20)= 5 x c x (100-26.5)
951.86 J = 367.5 x c
c = 2.59 J/g °C
what is the correct answer !
Answer:
Hi there, The correct answer is, OPT A
Explanation:
Please mark as the brainliest
Mendeleev's proposal of periodic table was based on:
The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.
[hope this is helpful!:))]
8. What is the molar mass of carbon dioxide, Co2(g)? How many grams of carbon
dioxide would there be for 3 moles? Explain.
Answer:
CO2 molar mass=44.01g
3 moles CO2 = 132.03g
Explanation:
CO2 molar mass = 12.01+2(16.00)=44.01g
3 moles CO2 * (44.01 g CO2)/(1 mol CO2)=132.03g
(Answer would be different depending on the number of decimals)
