Answer:
Chemical element, metallic, symbol Mg, situated in group IIa in the periodic table, atomic number: 12, atomic weight: 24,312. ... Magnesium is known for a long time as the lighter structural metal in the industry, due to it's low weight and to it's capability of forming mechanically resistant alloys.
What happens to valence electrons in ionic bonding?
Answer:
they are either donated to or taken by another atom to achieve octet arrangement
Explanation:
for example Na+ and Cl- .. they both have one extra and one less electron .
so they donate and receive one electron to/from each other to achieve the octet arrangement ..
A molecule forms when
A. 2 or more atoms are bonded covalently.
B. 2 or more atoms are bonded ionically.
C. 2 or more atoms transfer electrons to a nonmetal.
Question 10 (1 point)
What is the name for MnO?
manganese oxide
manganese (II) oxide
manganese (IV) oxide
manganese (VI) oxide
Answer:
D it is D
Explanation:
What is the conversion for 5 g + 3.3 mL =
Answer:
9 g/ml
Explanation:
5 + 3.3 = 8.5
But you should use sig figs.
5 has no tenths, hundredths, and etc.
Therefore the 8.5 rounds up to 9
So the answer is 9.
which one of the following groups are decomposers a. algae b. protist c. fungi d. green plants e. photosynthetic bacteria
Answer:c
Explanation:
What is period? A group?
What can help overcome a positive enthalpy of solution and allow a solid
solute to dissolve in water?
A. A decrease in entropy
B. A large amount of energy released
C. A large amount of energy absorbed
D. An increase in entropy
Answer: D. An increase in entropy
Explanation:
Entropy is the measure of randomness or disorder of a system. If a system moves from an disordered arrangement to an ordered arrangement, the entropy is said to increase and vice versa.
For a reaction to be spontaneous, the enthalpy of the solution must decrease and the entropy must increase.
To overcome a positive enthalpy of solution and allow a solid solute to dissolve in water, an increase in entropy would make the reaction spontaneous as the system would move to a more disordered state.
If you find a chemical in the lab and are unsure of
its identity, what is the best way to find out what it
is?
Answer:
C. read the label on the container
Explanation:
What information is found in an SDS? Check all that apply.
A. the identification of the chemical
C. the chemical and physical properties of the substance
D. the first-aid measures to take if an accident occurs involving the chemical
Answer:
C
Explanation:
just did it
Match each atomic particle with the correct charge.
1. proton neutral
2. neutron positive
3. electron negative
The proton is a postitive charge, therefore, being 1 (proton) matched to positive. Whilst neutron (2) is matched to neutral. Thus electron (3) is matched to negative.
Please actually help me.
Thank you!
Answer:
I say 20 is ur best option
What conversion factors
determine the number of
molecules from the number of
moles of a compound?
Answer: Avogrado's number, or 6.022 x 10^23
Explanation:
To convert from moles to atoms, multiply the molar amount by Avogadro's number. To convert from atoms to moles, divide the atom amount by Avogadro's number (or multiply by its reciprocal).
1. What is a chemical reaction
a process that involves rearrangement of the molecular or ionic structure of a substance, as distinct from a change in physical form or a nuclear reaction.
Answer:
Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products. ... A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products
Explanation:
Which is an example of radiation?
O Troy's hand is burned when he touches hot wax.
O Earth is heated by energy from the Sun.
O Ahot dog is held over a fire and gets warm.
O Water is boiled in a pot on a stove burner.
The statement which is considered to be a good example of radiation is: B. Earth is heated by energy from the Sun.
The types of heat transfer.In Science, there are three (3) main types of heat transfer and these include:
ConductionConvectionRadiationWhat is radiation?Radiation can be defined as the transmission (transfer) of energy in the form of waves particles through a material medium or space. Thus, radiation is a type of heat transfer which causes a person on Earth that is sitting under the Sun to feel warm.
Read more on heat here: brainly.com/question/12072129
State and explain each law of motion.
Answer:In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction
Explanation:
Answer:
EEEEEeeEEeEEEEEEEeEEEEEEEEEE
Explanation:
e
Of the three types of plate boundaries, which type is most likely to be associated
with pulling or tension forces?
transform
convergent
divergent
an object moving with a speed of 5m/s has a kinetic energy of 100J what is the mass of the object
Answer:
k. e. = 1/2 mv^2
100 = 1/2 * m * 5^2
100 = 1/2 * m * 25
m = 100 *2/25
m = 8 kg
hope it helps you
Sodium Chloride is an ionic compound. Its molar mass is 58.44g. One formula unit of NaCl consists of one____, whose chemical symbol is___ and one___whose chemical symbol is___. Please help me to fill in the gaps :)
Answer: One formula unit of NaCl consists of one cation, whose chemical symbol is [tex]Na^+[/tex] and one anion whose chemical symbol is [tex]Cl^-[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
The cation is formed by the metal sodium which forms [tex]Na^+[/tex] and the anion is formed by non metal chlorine which forms [tex]Cl^-[/tex].
For a formula unit of sodium chloride, the charges have to be balanced , thus the valencies of ions are exchanged and the neutral compound result. Thus
[tex]Na^+[/tex] and [tex]Cl^-[/tex] combine to form neutral [tex]NaCl[/tex]
27.2Pb(NO3)2 --> 2Pb0 + 4NO2 + O2
O A. Synthesis
B. Single displacement
C. Decomposition
D. Combustion
Identify the following as a chemical (C) or physical property (P):
1. blue color ______
2. melting point ______
3. density ______
4. reacts with water ______
5. flammability (burns) ______
6. solubility (dissolves) ______
7. boiling point ______
8. luster ______
Answer: 1. Phys 2. Phys 3. Phys 4. Chem 5. Chem 6. Phys 7. Phys 8. Phys
Explanation:
According to the concept of physical and chemical property ,reaction with water and flammability are chemical properties while rest are physical properties.
What are chemical properties?These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.
These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.
The major chemical properties are flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.
Learn more about chemical properties,here:
https://brainly.com/question/5186976
#SPJ2
14 steps decay series
5. CaCO, - CaO+CO,
Reaction Type
Answer:
(a) Decomposition: A substance breaks down to smaller species. [e.g. CaCO3(s) → CaO(s) + CO2(g) Decomposition of limestone to calcium oxide (quicklime) and carbon dioxide on heating.]
Which type of climate does Florida have due to its latitude?
Some fruits and vegetables are preserved by pickling them. Nandini got confused
with the various steps to be taken to preserve mangoes. Can you help her to
arrange them in the correct order?
1. Cut the mangoes into pieces.
2. Keep the pieces in the sun.
3. Add salt to the pieces.
4. Store it in a dry jar.
5. Wash and dry them
Answer:
ye
Explanation:
ye
An object has a density of 40 g/cm3 and a mass of 240 g what is it’s volume
Answer:
6cm^3
Explanation:
240/40=6
6 cm^3
How many moles are in 43 grams of lithium (LI)?
Answer:
6.19507275608684
Explanation:
Look at the picture. If one of the lightbulbs breaks or is removed, what will happen to the other lightbulb?
2 bulbs and a battery in a single loop of wire.
Question 2 options:
It will stay on
It will go off
It will change colors
It will burn out
HERES ANOTHER FOR YOU GUYS! :)
Answer:
It will go off.
Explanation:
Since the two bulbs are connected in series with the battery, when one bulb breaks breaks the circuit hence flow of current is stopped from moving to the other bulb
SOMEONE HELP PLEASE!
Answer:
The nose consists of the visible external nose and the internal nasal cavity. The nasal septum divides the nasal cavity into right and left sides. Air enters two openings, the external nares (nostrils; singular, naris), and passes into the vestibule and through passages called meatuses. The bony walls of the meatuses, called concha, are formed by facial bones (the inferior nasal concha and the ethmoid bone). From the meatuses, air then funnels into two (left and right) internal nares. Hair, mucus, blood capillaries, and cilia that line the nasal cavity filter, moisten, warm, and eliminate debris from the passing air.
The pharynx (throat) consists of the following three regions, listed in order through which incoming air passes:
The nasopharynx receives the incoming air from the two internal nares. The two auditory tubes that equalize air pressure in the middle ear also enter here. The pharyngeal tonsil (adenoid) lies at the back of the nasopharynx.
The oropharyrnx receives air from the nasopharynx and food from the oral cavity. The palatine and lingual tonsils are located here.
The laryngopharynx passes food to the esophagus and air to the larynx.
The larynx receives air from the laryngopharynx. It consists of several pieces of cartilage that are joined by membranes and ligaments, shown in Figure 2:
The epiglottis, the first piece of cartilage of the larynx, is a flexible flap that covers the glottis, the upper region of the larynx, during swallowing to prevent the entrance of food.
The thyroid cartilage protects the front of the larynx. A forward projection of this cartilage appears as the Adam's apple (anatomically known as the laryngeal prominence).
The paired arytenoid cartilages in the rear are horizontally attached to the thyroid cartilage in the front by folds of mucous membranes. The upper vestibular folds (false vocal cords) contain muscle fibers that bring the folds together and allow the breath to be held during periods of muscular pressure on the thoracic cavity (straining while defecating or lifting a heavy object, for example). The lower vocal folds (true vocal cords) contain elastic ligaments that vibrate when skeletal muscles move them into the path of outgoing air. Various sounds, including speech, are produced in this manner.
The cricoid cartilage, the paired cuneiform cartilages, and the paired corniculate cartilages are the remaining cartilages supporting the larynx.
The trachea (windpipe) is a flexible tube, 10 to 12 cm (4 inches) long and 2.5 cm (1 inch) in diameter (Figure 2).
The mucosa is the inner layer of the trachea. It contains mucus‐producing goblet cells and pseudostratified ciliated epithelium. The movement of the cilia sweeps debris away from the lungs toward the pharynx.
The submucosa is a layer of areolar connective tissue that surrounds the mucosa.
Hyaline cartilage forms 16 to 20 C‐shaped rings that wrap around the submucosa. The rigid rings prevent the trachea from collapsing during inspiration.
The adventitia is the outermost layer of the trachea. It consists of areolar connective tissue.
The primary bronchi are two tubes that branch from the trachea to the left and right lungs.
Inside the lungs, each primary bronchus divides repeatedly into branches of smaller diameters, forming secondary (lobar) bronchi, tertiary (segmental) bronchi, and numerous orders of bronchioles (1 mm or less in diameter), including terminal bronchioles (0.5 mm in diameter) and microscopic respiratory bronchioles. The wall of the primary bronchi is constructed like the trachea, but as the branches of the tree get smaller, the cartilaginous rings and the mucosa are replaced by smooth muscle.
Alveolar ducts are the final branches of the bronchial tree. Each alveolar duct has enlarged, bubblelike swellings along its length. Each swelling is called an alveolus. Some adjacent alveoli are connected by alveolar pores.
The respiratory membrane consists of the alveolar and capillary walls. Gas exchange occurs across this membrane. Characteristics of this membrane follow:
Type I cells are thin, squamous epithelial cells that constitute the primary cell type of the alveolar wall. Oxygen diffusion occurs across these cells.
Type II cells are cuboidal epithelial cells that are interspersed among the type I cells. Type II cells secrete pulmonary surfactant (a phospholipid bound to a protein) that reduces the surface tension of the moisture that covers the alveolar walls. A reduction in surface tension permits oxygen to diffuse more easily into the moisture. A lower surface tension also prevents the moisture on opposite walls of an alveolus or alveolar duct from cohering and causing the minute airway to collapse.
Alveolar macrophage cells (dust cells) wander among the other cells of the alveolar wall, removing debris and microorganisms.
pls help science
Which description properly describes the plant structures involved in photosynthesis?
Stomata take in water, sunlight, and carbon dioxide and release oxygen.
Phloem transports water, stomata take in carbon dioxide, and chlorophyll absorbs sunlight.
Xylem takes in water, sunlight, and carbon dioxide and releases oxygen.
Stomata take in carbon dioxide and release oxygen.
Answer:
Stomata take in water, sunlight, and carbon dioxide and release oxygen.
Explanation:
Photosynthesis collects and absorbs sunlight and converts the sunlight into sugars (glycose), then the plant stores the sugar and uses it.
Pick out the metals which can react with magnesium sulphate solution. Justify the answer.
calcium, aluminium, mercury, sodium, platinum, copper
Answer: aluminium, mercury , platinum and copper.
Explanation:
A single replacement reaction is one in which a more reactive element displaces a less reactive element from its salt solution. Thus one element should be different from another element.
A general single displacement reaction can be represented as :
[tex]XY+Z\rightarrow XZ+Y[/tex]
Thus the metals which are more reactive than magnesium will react with magnesium sulphate solution.
The metals which are more reactive than magnesium are aluminium, mercury , platinum and copper.
PLEASE HELPPP!!!!!! ASAP!!!!
Which of the following best describes cations? Question 19 options: A) They're negatively charged because they lost an electron. B) They're positively charged because they gained an electron. C) They're positively charged because the number of electrons remained the same. D) They're positively charged because they lost an electron.
Answer:D
Explanation:trust me bro
Answer:
D
Explanation: I took the test
