why solid keep their shape?

Answers

Answer 1

Answer:

Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms

Hope this helps ☆*:. o(≧▽≦)o .:*☆


Related Questions

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

Given: F = k· m. g
Solve for "k"

Answers

Answer:

[tex]F = kmg \\ k = \frac{F}{mg} [/tex]

Explanation:

F = k . m . g

=> F = k . mg

[tex] = > k = \frac{F}{mg} (ans)[/tex]

the slope of a line on a position vs time graph is the

a. velocity
b. time
c. distance
d. displacement

Answers

It's the velocity, but only the magnitude. It can't show the direction of the velocity. So it's better to call it speed.

1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?

Answers

Answer:

38500

Explanation:

I looked it up so it may be wrong

the weight of a body is 420 newton.calculate it's mass​

Answers

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why? ​

Answers

Answer:

difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.

The fluid inside the hydraulic jack has a pressure of 30,000 Pa. If the surface of
the piston that is used to lift an object is 0.1 m’in area, how much weight can
the jack lift?​

Answers

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

Define measurement with 10 points

Answers

Answer:

the process of comparing unknown quantities with known standards quantities are known as measurement

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.

Answers

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

A ball is dropped from the roof of a 25-m-tall building. What is the velocity of the object when it touches the ground? Suppose the ball is a perfect golf ball and it bounces such that the ve locity as it leaves the ground has the same magnitude but the op posite direction as the velocity with which it reached the ground How high will the ball bounce? Now suppose instead that the ball bounces back to a height of 20 m. What was the velocity with which it left the ground?

Answers

Answer:

a)  [tex]h=25m[/tex]

b)  [tex]v=19.8m/sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=25m[/tex]

Bounce Height [tex]h'=20m[/tex]

Generally the Kinematic equation is mathematically given by

[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]

[tex]V=22.1m/sec[/tex]

Therefore Height

[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]

[tex]h=25m[/tex]

b)

Generally the Kinematic equation is mathematically given by

[tex]v^2=2ah[/tex]

[tex]v^2=2*9.8*20[/tex]

[tex]v=\sqrt{2*9.8*20}[/tex]

[tex]v=19.8m/sec[/tex]

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

define electrical resistance in a metal conductor​

Answers

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

define Neutons 3rd law .​

Answers

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

A bullet with a mass mb=13.5 g is fired into a block of wood at velocity vb=245 m/s. The block is attached to a spring that has a spring constant k of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass mw of the wooden block.

Answers

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Other Questions
Engineers are designing a large elevator that will accommodate 44 people. The maximum weight the elevator can hold safely is 8228 pounds. According to the National Health Statistics Reports, the weights of adult U.S. men have mean 186 pounds and standard deviation 60 pounds, and the weights of adult U.S. women have mean 157 pounds and standard deviation 69 pounds.a. If 44 people are on the elevator, and their total weight is 8228 pounds, what is their average weight?b. If a random sample of 44 adult men ride the elevator, what is the probability that the maximum safe weight will be exceeded?c. If a random sample of 44 adult women ride the elevator, what is the probability that the maximum safe weight will be exceeded? Hacer una obra teatral con los tres cerditos y el zorro Which point gives the y-intercept of (x) = x2 + 4x 3? I need help. You are interested in finding a 95% confidence interval for the average commute that non-residential students have to their college. The data below show the number of commute miles for 12 randomly selected non-residential college students. Round answers to 3 decimal places where possible. Matthew Travels 42/50 Meters In 26/30 Minutes. Find The Speed of Mathew In Meters Per Second. Which law allows an artist the right to prevent his or her work from being subject to derogatory treatment?A. the Code of Federal RegulationsB. the First AmendmentC. the Resale ActD. the Visual Artists Rights Act IN C++A. Create an abstract base class called Currency with two integer attributes, both of which are non-public. The int attributes will represent whole part (or currency note value) and fractional part (or currency coin value) such that 100 fractional parts equals 1 whole part. B. Create one derived class - Money - with two additional non-public string attributes which will contain the name of the currency note (Dollar) and currency coin (Cent) respectively. DO NOT add these attributes to the base Currency class.C. In your base Currency class, add public class (C++ students are allowed to use friend methods as long as a corresponding class method is defined as well) methods for the following, where appropriate:Default Construction (i.e. no parameters passed)Construction based on parameters for all attributes - create logical objects only, i.e. no negative value objects allowedCopy Constructor and/or Assignment, as applicable to your programming language of choiceDestructor, as applicable to your programming language of choiceSetters and Getters for all attributesAdding two objects of the same currencySubtracting one object from another object of the same currency - the result should be logical, i.e. negative results are not allowedComparing two objects of the same currency for equality/inequalityComparing two objects of the same currency to identify which object is larger or smallerPrint method to print details of a currency objectAll of the above should be instance methods and not static.The add and subtract as specified should manipulate the object on which they are invoked. It is allowed to have overloaded methods that create ane return new objects.D. In your derived Money class, add new methods or override inherited methods as necessary, taking care that code should not be duplicated or duplication minimized. Think modular and reusable code.E. Remember -Do not define methods that take any decimal values as input in either the base or derived classes. Only the print method(s) in the classes should print anything to console.Throw String (or equivalent) exceptions from within the classes to ensure that invalid objects cannot be created.F. In your main:Declare a primitive array of 5 Currency references (for C++ programmers, array of 5 Currency pointers).Ask the user for 5 decimal numbers to be input - for each of the inputs you will create one Money object to be stored in the array.Once the array is filled, perform the following five operations:Print the contents of the array of objects created in long form, i.e. if the user entered "2.85" for the first value, it should be printed as "2 Dollar 85 Cent".Add the first Money object to the second and print the resulting value in long form as above.Subtract the first Money object from the third and print the resulting value in long form as above.Compare the first Money object to the fourth and print whether both objects are equal or not using long form for object values.Compare the first Money object to the fifth and print which object value is greater than the other object value in long form.All operations in the main should be performed on Currency objects demonstrating polymorphism. Remember to handle exceptions appropriately.There is no sample output - you are allowed to provide user interactivity as you see fit. Can someone help me with this math homework please! Bluebean Inc. produces two lines of coffee cups: espresso coffee cups and travel coffee mugs. The unit cost information is shown here. The company uses a traditional volume-based costing system and believes that the number of labor hours is the appropriate cost driverActivity Cost Pool Espresso Coffee Cups Travel Coffee Mugs Selling price $20 $25 Direct materials $6 $8 Direct labor $2 $5 Units produced 10,000 units 4,000 units Direct labor hours 10,000 hours 6,000 hours Estimated total overhead costs $80,000Item Espresso coffee cups Travel coffee mugsPre-determined overhead rate Total manufacturing overhead allocated Manufacturing cost per unit Gross profit unit in what wat did WW1 represent a turning point in modern world history How can a Bose-Einstein condensate be formed? A. B super-heating a gas. B. By super-cooling certain types of solid. C. By super-cooling certain types of plasma. D. By super-heating a plasma PLEASE i need the answers!!!!!!!!!I have no time please if you know the answer please tell MEEE!!!!!!!!!!! The lengths of the sides of a triangle are 3, 4, 5. Can the triangle be a right triangle? The defendant is on trial for fraudulently signing a check for $10,000. The defendant has denied that she signed the check. The prosecutor calls the landlord of the apartment building in which the defendant has resided for three months before her arrest. The landlord intends to testify that it is the defendant's signature on the check, and he bases his opinion of the authenticity of her signature on the ground that he saw her sign the lease to his apartment. Should the trial court find this testimony admissible need help with redoing my spanish answers on this question:Re-write the following sentences replacing the underlined direct object with a direct object pronoun. Remember, the direct object pronoun needs to be placed directly in front of the conjugated verb. The following is an example:Example: Sara come una hamburguesa. (Sara eats a hamburger.)Answer: Sara la come. (Sara eats it.) Replace the underlined words with a DOP based on the chart in my explanation. The DOP goes in front of the conjugated verb and your sentence should not have any of the underlined words in it since they are replaced with the DOP11. Yo veo las sillas. Los veo. (wrong)12. Maria escucha (listens to) la msica. Maria lo escucha. (wrong)and 13. Sara llama a Pedro. (Sara Pedro.)callsSara llama. (wrong) solve the equation 4+2|3x+4|=-4Absolute Value Equations and Inequalitiesthe solutions are what? please give an explanation if possible! can i get some help? i tried figuring it out myself already but i must have done something wrong. please help! Which statement about the functiontrue?The graph of the function f(x) = 4(x + 3)(x - 1) is shownbelow.O The function is positive for all real values of x wherex < -1.y6NAThe function is negative for all real values of x wherex 1.O The function is positive for all real values of x wherex > 0.O The function is negative for all real values of x whereX-1.2-642.46-2-246 Many experts believe that marketing is the most important function in a company. Discuss the reasons this is a true statement. Discuss the reasons this is not a true statement. Please help me i need the answer right now. The lesson is Rational Root Theorem.