Work shown would be appreciated ❤️

20 points!!!!

Answer: In the case of water, we know that the O-H covalent bond is polar, due to the different electronegativities of hydrogen and oxygen. Since there are two O-H bonds in water, their bond dipoles will interact and may result in a molecular dipole which can be measured.

Explanation:

Hi there! :)

[tex]\large\boxed{x = 2.49 L}[/tex]

Use the proportion for Charles' Law where:

[tex]\frac{v_{1}}{t_{1}}= \frac{v_{2}}{t_{2}}[/tex]

v1 = initial volume

t1 = initial temperature

v2 = final volume

v2 = final temperature

Substitute in the given values into the proportion:

v1 = 4.39 L

t1 = 44° C

t2 = 25°C

v2 = x L

Set up the proportion:

[tex]\frac{4.39}{44} = \frac{x}{25}[/tex]

Cross multiply:

[tex]25 * 4.39 = 44x\\\\109.75 = 44x\\\\x = 2.49 L[/tex]

Answer:

The new volume will be approximately 2.49 L.

Explanation:

We are given that a gas sample occupies 4.39 L at 44° C.

We are also given that we are going decrease the temperature to 25° C.

Charles' Law has a formula which shows the relationship between the volumes of a samples and the temperatures of the samples.

The proportion is shown as:

[tex]\displaystyle \bullet \ \ \ \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex],

where V₁ and V₂ are the initial and final volume respectively and T₁ and T₂ are the initial and final temperature respectively.

This proportion can be used to determine what our unknown is. We need to know the final volume.

[tex]\displaystyle \frac{4.39 \ \text{L}}{44 \ \text{C}} = \frac{\text{x}}{25 \ \text{C}}\\\\\\\frac{4.39}{44} = \frac{x}{25}\\\\\\4.39 \times 25 = 44 \times x\\\\\\44x = 109.75\\\\\\\frac{44x}{44}=\frac{109.75}{44}\\\\\\x = 2.49432 \approx \boxed{2.49 \ \text{L}}[/tex]

Therefore, if we reduce the temperature to 25 °C, we will be reducing the volume of the substance to 2.49 L.

Answer:

the  molar mass of the compound is  34.0 g /mol

Explanation:

The computation of the molar mass of the compound is as follows:

As we know that

PV = nRT

n = mass ÷ MW

PV = mRT ÷ MW

It can be rearrange as

MW = mRT ÷ (PV)

MW = (0.941)(0.082)(150 + 273) ÷ (1 × 0.96)

= 33.99g/mol

= 34.0 g /mol

Hence, the  molar mass of the compound is  34.0 g /mol

Answer:

Molarity = 0.3 M

Explanation:

Given data:

Moles of NaOH = 0.720 mol

Volume of water = 2.40 L

Molarity = ?

Solution:

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

Molarity = 0.720 mol / 2.40 L

Molarity = 0.3 mol/L

Molarity = 0.3 M

Answer:

P4O10

Explanation:

Answer:

Carbon dioxide concentrations are rising mostly because of the fossil fuels that people are burning for energy.

Answer:

C. are found in the nucleus of an atom

Explanation:

Protons and Neutrons are always located at the center of the atom also called as the nuclei of the atom and constitute nearly all the mass of the atom, while the electrons revolve around them in orbits called shells. Only protons have a positive charge and electrons have negative charges, due to which only protons and electrons attract each other, while neutrons lack charges or have 'Neutral Charges'.

Answer:

2.652 g/h.

Explanation:

Burn rate (in mg/min) = 44.2 mg/min

Burn rate (in m/h) =?

We'll begin by converting 44.2 mg/min to g/min. This can be obtained as follow:

1 mg/min = 0.001 g/min

Therefore,

44.2 mg/min = 44.2 mg/min × 0.001 g/min / 1 mg/min

44.2 mg/min = 0.0442 g/min

Finally, we shall convert 0.0442 g/min to g/h. This can be obtained as follow:

1 g/min = 60 g/h

Therefore,

0.0442 g/min = 0.0442 g/min × 60 g/h / 1 g/min

0.0442 g/min = 2.652 g/h

Therefore, 44.2 mg/min is equivalent to 2.652 g/h.

Thus, the burn rate (in m/h) is 2.652 g/h.

Answer:

Gibbs free energy equation

Explanation:

Answer:

try (107.87 amu)

Explanation:

Answer:

the Product

Explanation:

Answer:

conductors

Explanation:

Answer:

0.36M HCl

Explanation:

The reaction of Mg(OH)₂ with HCl is:

Mg(OH)₂ + 2HCl → MgCl₂ + 2H₂O

Where 1 mole of magnesium hydroxide reacts with 2 moles of HCl

To solve this question, we need to find the moles of Mg(OH)₂ that reacted and, with chemical equation, solve for the moles of HCl and its molarity (Using the 10.00mL = 0.01000L) as follows:

Moles of Mg(OH)₂:

18mL = 0.018L * (0.100mol / L) = 0.0018 moles Mg(OH)₂

Moles HCl:

0.0018 moles Mg(OH)₂ * (2 moles HCl / mol Mg(OH)₂) = 0.0036 moles HCl

Molarity HCl:

0.0036 moles HCl / 0.0100L =

Answer:

After 3 half lives 10 g of radio active material left.

Explanation:

Given data:

Total amount of radio active material = 80 g

Amount left after 3 half lives = ?

Solution:

At time zero = 80 g

At first half life = 80 g/2 = 40 g

At 2nd half life = 40 g/2 = 20 g

At 3rd half life = 20 g/2 = 10 g

Thus, after 3 half lives 10 g of radio active material left.

Answer:

It converts The liquid into a gas at the same temperature.

Explanation:

Answer:

it converts the liquid into gas at the same temperature

Explanation:

when heat is added to a liquid at boiling temperature it converts the liquid into gas at that same boiling temperature

please give brainliest

Answer:

39.095

Explanation:

this is because all this isotopes belong to a single element thus

(38.96×93.26)+(39.96×0.012)+(40.96×6.73)

answer of that divided by 100%

Answer:

a chromosome contains many genes

Explanation:

The type of bond is determined by the difference in electronegativity of the atoms. Hence, option D is correct.

A chemical bond is what holds atoms together in molecules.

The ability of an atom to attract a pair of electrons in a chemical bond is called its electronegativity. The difference in electronegativity between two atoms determines how polar a bond will be.

Hence, option D is correct.

Learn more about bond here:

https://brainly.com/question/7591319

#SPJ2

Answer:

Explanation:

Answer:

i not sure but i searched it up and it said Q=104525J

Explanation:

The correct decay series :

₈₄Po²¹⁴⇒₈₃Bi²¹⁰+₂He⁴+ ₋₁e⁰+ ₀γ⁰

Radioactivity is the process of unstable isotopes to stable isotopes by decay, by emitting certain particles,  

Decay's reaction :

₈₄Po²¹⁴⇒₈₃Bi²¹⁰+x+y+z

From this decay reaction can be concluded

mass number decreased by 4

atomic number decreased by 1

Then the most suitable are:

Polonium-214 undergoes 1 alpha decay 1 beta decay and 1 gamma emission.

₈₄Po²¹⁴⇒₈₃Bi²¹⁰+₂He⁴+ ₋₁e⁰+ ₀γ⁰

So that the mass number and atomic number are the same both before and after decay

One major characteristic they have in common is they are metals.

Answer:

Option C. 4.03 g

Explanation:

Firstly we analyse data.

12 % by mass, is a sort of concentration. It indicates that in 100 g of SOLUTION, we have 12 g of SOLUTE.

Density is the data that indicates grams of solution in volume of solution.

We need to determine, the volume of solution for the concentration

Density = mass / volume

1.05 g/mL = 100 g / volume

Volume =  100 g / 1.05 g/mL → 95.24 mL

Therefore our 12 g of solute are contained in 95.24 mL

Let's finish this by a rule of three.

95.24 mL contain 12 g of sucrose

Our sample of 32 mL may contain ( 32 . 12) / 95.24 = 4.03 g

The [H₃0⁺] of the solution : 1.778  x 10⁻¹² M

pH is the degree of acidity of a solution that depends on the concentration of H⁺ ions. The greater the value the more acidic the solution and the smaller the pH.  

pH = - log [H⁺]  

So that the two quantities between pH and [H⁺] are inversely proportional because they are associated with negative values.  

A solution whose value is different by n has a difference in the concentration of H⁺ ion of 10ⁿ.  

pH of solution = 11.75

the [H₃0⁺] of the solution :

[tex]\tt pH=-log[H_3O^+]\\\\11.75=-log[H_3O^+]\\\\(H_3O^+]=10^{-11.75}=1.778\times 10^{-12}[/tex]

Answer:

253.5mL of Ba(OH)₂ are required to neutralize the HCl solution

The pH at equivalence point is = 7

Explanation:

The reaction of Ba(OH)₂ with HCl is:

Ba(OH)₂ + 2HCl → BaCl₂ + 2H₂O

First, we need to find moles of HCl. With these moles and the chemical equation we can find the moles of Ba(OH)₂ and the volume required:

Moles HCl:

75.0mL = 0.075L * (0.845mol / 1L) = 0.063375moles HCl

Moles Ba(OH)₂:

0.06338moles HCl * (1mol Ba(OH)₂ / 2mol HCl) = 0.03169 moles Ba(OH)₂

Volume of the 0.125M Ba(OH)₂:

0.03169 moles Ba(OH)₂ * (1L / 0.125mol) = 0.2535L are required =

253.5mL of Ba(OH)₂ are required to neutralize the HCl solution

As the titration was of a strong acid, HCl, with a strong base, Ba(OH)₂, the pH at equivalence point is = 7

Answer:

Heat the molecule

Explanation:

Since most bonds require energy to form, they also give off energy when they are broken. But before most bonds break, the molecule has to be heated. Then the atoms start to move, and when they move too much, the bond breaks. Molecules that require less energy to break than they give off when broken are called fuels.