Answers
Answer:
It Should be Strong Acid
Explanation:
Strong acids and bases ionize fully in an aqueous solution. Weak acids and bases also ionize, but only partially and the reaction is reversible. So how do we know if an acid or base is strong or weak? A simple way to determine strength is to add the acid or base to water— high reactivity means a stronger acid or base. This reactivity is measured with a value called the Ka or Kb value. It tells us how reactive an acid or a base is based on how many hydronium or hydroxide ions are formed during the reaction. Hope it helps :)
Related Questions
How many atoms of carbon are in diamond
Answers
Answer:
A diamond contains 5.0 x 10 21 atoms of carbon.
Please help me out here please
Answers
Toma en cuenta los textos para responder estas interrogantes: ¿Consideramos que la aplicación de las medidas de seguridad depende de las características de tu entorno?
Answers
Answer:
Si.
Explicación:
Sí, la aplicación de medidas de seguridad depende de las características de su entorno porque el entorno nos brinda para elegir las medidas de seguridad. Existen diferentes instrumentos utilizados para la seguridad de diferentes entornos. Algunas medidas de seguridad se aplican en un entorno mientras que el otro se aplica a otro entorno. Por ejemplo, el vallado es una medida de seguridad que se puede aplicar en el terreno pero no en el agua o cualquier zona fangosa, por lo que podemos decir que las características físicas deciden qué medida de seguridad se debe instalar en el entorno.
How many atoms does 9.3 moles of Mo represent?
Answers
Answer:
5.60 × 10²⁴ Mo atomsExplanation:
The number of atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
N = 9.3 × 6.02 × 10²³
We have the final answer as
5.60 × 10²⁴ Mo atomsHope this helps you
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answers
Answer:
lol thanks for the 10
Explanation:
Can I have someone to talk to it’s really important and I need advice..
Answers
Answer:
go for it
Explanation:
Answer:
I would be happy to help
Explanation:
Materials that allow electrons to move easily from atom to atom are called _____________.
Answers
Answer:
Explanation:
conductors
Your welcome
How many planets did early astronomers know about?
Answers
Answer:
5 Plants
Explanation:
Also can i have Brainlist
Will carbon and hydrogen atoms most likely form an ionic bond or a covalent bond?
Answers
What are the mole ratios of the following chemical equation: C3H8 + 5O2 --> 3CO2 + 4H2O?
Answers
Answer:Redox and combustion.
Explanation:
C3H8) reacts with oxygen in the air, so C3H8(g) + 5O2(g) = 3CO2(g) + 4H2O(g) Classification: Redox and combustion.
2
In the movie, Tim says that Saturn's rings refract light to
produce colors. What does this mean?
A They emit light
B They bend and reflect light
CThey absorb all light
D They block light
Answers
Answer:
It would be B they bend to reflect light
Evidence of Earth’s plate tectonic activity is most obvious after an earthquake. Which explanation best describes this plate tectonic movement?
A: Earth’s plates stress one another. However, when an earthquake occurs, plate movement is due to an unbalanced force on the plates.
B: Earth’s plates are moving fast. However, the force of friction slows their movement.
C: The force of gravity causes the floating plates to move up and down. The plate movement sometimes results in earthquakes.
D: Earth’s plates continually place stress on one another. However, the force is balanced during an earthquake.
Answers
Answer:a
Explanation:bc
Plates on Earth are moving quickly. Yet, friction causes them to travel more slowly. So, the correct options are B and C.
What are tectonic plates?Tectonic plates are enormous fragments of the upper mantle and crust of the Earth. They are composed of both continental and oceanic crust. Earthquakes occur around mid-ocean ridges and the large faults which mark the edges of the plates.
The Earth's plates are shifting swiftly. Nevertheless, friction slows their movement. Gravity causes the floating plates to rise and fall. On occasion, the movement of tectonic plates results in earthquakes.
When compared to the Earth's mantle, the plates behave like solid, unyielding shells. The lithosphere is the name given to this thick outer layer.
Thus, the correct options are B and C.
Learn more about Tectonic plates, here:
https://brainly.com/question/30805154
#SPJ3
TRUE OR FALSE
All of the elements on Earth, except for hydrogen, were formed in the interiors of stars.
Answers
Answer:
True
Explanation:
I checked several websites to double check for you.
Answer:
Except for hydrogen and some helium created in the Big Bang, all of the stuff we, and the Earth around us, are made of, was generated in stars, through sustained fusion or in supernova explosions i thank its true :) hope this helps
Why do you think we use heat to dissolve sodium tetraborate?
Answers
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
Define stoichiometry
Answers
Stoichiometry is the field of chemistry that is concerned with the relative quantities of reactants and products in chemical reactions. For example, when oxygen and hydrogen react to produce water, one mole of oxygen reacts with two moles of hydrogen to produce two moles of water
Answer:
the relationship between the relative quantities of substances taking part in a reaction or forming a compound, typically a ratio of whole integers.
Explanation:
Dont put so much points pal,
Describe the molecular structure of the three main types of lipids
Brainliest!!!!!
Answers
Answer:
Lipids are divided into three categories.
Triglycerides, phospholipids, and sterols are the three major forms of lipids.
You place a balloon in a closed chamber at standard temperature and pressure (STP). You triple the chamber pressure.
What happens to the balloon?
The volume stays the same.
The volume increases to three times its original volume.
The temperature must also change for the volume to change.
The volume decreases to one-third of its original volume.
Answers
Answer:
it pops?
Explanation:
How will popcorn protect a egg by reducing the force of impact on the egg? How does it work?
Answers
Answer:
The popcorn will take less impact because the force goes into the popcorn serving as a cushion for the egg. The egg will take less damage because the force will cancel out.
Explanation:
The following is an example of which type of boundary?
A subduction zone
B convergent boundary
C divergent boundary
D transform boundary. . also pls no links or random answes
Answers
Question 24 of 33
Which of the following pairs of elements will form covalent bonds with each
other?
The Periodic Table
A. Magnesium (Mg) and oxygen (0)
B. Chromium (Cr) and zinc (Zn)
O
C. Silicon (Si) and nitrogen (N)
D. Potassium (K) and bromine (Br)
Answers
The elements that will form covalent bonds are Silicon (Si) and nitrogen (N), option C.
What are covalent bonds?A covalent bond is formed between two atoms by the mutual sharing of one or more pairs of electrons. The two atomic nuclei attract these electrons at the same time. When the difference in electro-negativities of two atoms is too small for electron transfer to form ions, a covalent bond forms.
Hydrogen (H₂) is a molecule with a single covalent bond as well as Halogens like Fluorine (F), Chlorine (Cl), Silicon (Si) and nitrogen (N).
Find out more on covalent bonds here: https://brainly.com/question/12732708
#SPJ1
If you put 100g of NaOH in cube form and 200g of NaOH in powered form which will react with HCl at a faster rate? Explain why
Answers
Answer:
200g of NaOH in powered form will react with HCl at a faster rate
Explanation:
200g of NaOH in powered form will react with HCl at a faster rate because it is in powdered form and it will have high surface area to volume ration and hence high reactivity and rate of reaction as compared to the cube NaOH.
I have 130 L of gas in a piston at a temperature of 250°C. If I cool the gas
until the volume decreases to 85 L, what will the temperature of the gas be?
Answers
This is a Charles' Law problem: V1/T1 = V2/T2. As the temperature of a fixed mass of gas decreases at a constant pressure, the volume of the gas should also decrease proportionally. Here, we are given the new volume of the gas after cooling, and we want to determine to what temperature the gas was cooled.
To use Charles' Law, the temperature must be in Kelvin (x °C = x + 273.15 K). We want to solve Charles' Law for T2, which we can obtain by rearranging the equation into T2 = V2T1/V1. Given V1 = 130 L, T1 = 250 °C (523.15 K), and V2 = 85 L:
T2 = (85 L)(523.15 K)/(130 L) = 342 K or 68.9 °C. If sig figs are to be considered, since all the values in the question are given to two sig figs, the answer to two sig figs would be either 340 K or 69 °C.
Gases show great uniformity in their behaviour irrespective of their nature. The concept Charles's law is used here to determine the new temperature of the gas. The new temperature of the gas is 341.96 K.
What is Charles's law?At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. The absolute scale of temperature is introduced by the scientist Charles. The temperature at which gases supposed to have zero volume is called the absolute temperature.
Mathematically the Charles's law can be expressed as:
V = constant × T
V / T = constant
For two different gases, the equation is:
V₁ / T₁ = V₂ / T₂
T₂ = V₂T₁ / V₁
85 × 523 / 130 = 341.96 K
Thus the new temperature of the gas is 341.96 K.
To know more about Charles's law, visit;
https://brainly.com/question/16927784
#SPJ2
PLEASE ANSWER!!!!!! WILL MARK BRAILIEST!!!! TYSM!!
Answers
antimony tribromide SbBr3
hexaboron silicide B6Si
chlorine dioxide ClO2
hydrogen iodide HI
iodine pentafluoride IF5
dinitrogen trioxide N2O3
phosphorus triiodide PI3
selenium hexafluoride SeF6
sulfur tetrachloride SCl4
diboron silicide B2Si
disilicon hexabromide Si2Br6
nitrogen trifluoride NF3
carbon disulfide CS2
dihydrogen monoxide H2O
tetraphosphorus pentasulfide P4S5
diarsenic pentoxide As2O5
Zach invited his friend Sydney to a pool party over the weekend. Sydney informed Zach that the climate was supposed to be rainy over the weekend and suggested that he change his plans. Zach explained to Sydney that she had misused the word “climate” and she should have used the word “weather” instead. Which of the following statements accurately clarifies the confusion between Zach and Sydney?
A). Zach is correct; the weather for this area is typically tropical and wet.
B). Sydney is correct; there has been an abundance of rainfall within the last month, changing the climate of this particular area.
C). Zach is correct; the climate of an environment is determined by patterns in weather conditions over an extended period of time.
D). Sydney is correct; the climate of an environment can change constantly based on weather, wind, and front patterns in the area.
Answers
Answer:
C
Explanation:
Common sense
How many moles of O₂ are needed to burn 2.5 moles of CH₃OH?
Answers
Answer:
3.75 moles
Explanation:
The chemical equation is 2CH₃OH + 3O₂ -> 2CO₂ + 4H₂O
2 moles of CH₃OH are burned by 3 moles of O₂
For 2.5 moles of CH₃OH are burned by x moles of O₂
Let's solve for x :
2*x=2.5*3 => 2*x=7.5 => x=3.75 moles of O₂ are needed to burn 2.5 moles of CH₃OH
Explain why NH3 has a higher solubility in water than SbHz.
Answers
Answer: NH3 has a higher solubility rate than SbH3 because it has much stronger bonds. ... HoCH2CH2OH because it can form two bonds with water compared to the other molecule which can only form one.
HOPE THIS HELPS
How do you name branched-chain alkanes?
Answers
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answers
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
______ is the tendency of an organism to maintain a constant and stable internal environment
Answers
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
Using an analogy of a water balloon, describe the function of the bladder.
Answers
Answer:
A bladder is like a balloon, because it holds urine, just like a balloon holds air. The urethra's function is to excrete urine from the human body.
Explanation:
A bladder and a balloon are similar, because it is the bladder which clasp urine, whereas a balloon clench air. The role of urethra is to eliminate urine from our human body.
What is bladder?The hollow organ which is in triangle shape and found in the lower abdomen just like a balloon is defined as the bladder. The urinary bladder is also known as a temporary reservoir of urine. Urine is reserved in the urinary bladder till it is removed out through the urethra.
As a result of the contraction of the wall of the urinary bladder, urine is eliminated from the body from time to time. The urine contains waste and extra fluid left over the body which has to be eliminated.
The bladder resembles the water balloon in that it holds urine in the similar way as the water balloon clench water. The water balloon pops when the amount of water exceeds than it can hold.
Thus the function of bladder and water balloon are found to be same.
To know more about bladder, visit;
https://brainly.com/question/28496978
#SPJ6
