=======================================================
//Class header definition
public class DisArray {
//First method with int array as parameter
public static void convert2D(int[] oneD) {
//1. First calculate the number of columns
//a. get the length of the one dimensional array
int arraylength = oneD.length;
//b. find the square root of the length and typecast it into a float
float squareroot = (float) Math.sqrt(arraylength);
//c. round off the result and save in a variable called row
int row = Math.round(squareroot);
//2. Secondly, calculate the number of columns
//a. if the square of the number of rows is greater than or equal to the
//length of the one dimensional array,
//then to minimize padding, the number of
//columns is the same as the number of rows.
//b. otherwise, the number of columns in one more than the
// number of rows
int col = ((row * row) >= arraylength) ? row : row + 1;
//3. Create a 2D int array with the number of rows and cols
int [ ][ ] twoD = new int [row][col];
//4. Place the elements in the one dimensional array into
//the two dimensional array.
//a. First create a variable counter to control the cycle through the one
// dimensional array.
int counter = 0;
//b. Create two for loops to loop through the rows and columns of the
// two dimensional array.
for (int i = 0; i < row; i++) {
for (int j = 0; j < col; j++) {
//if counter is less then the length of the one dimensional array,
//then copy the element at that position into the two dimensional
//array. And also increment counter by one.
if (counter < oneD.length) {
twoD[i][j] = oneD[counter];
counter++;
}
//Otherwise, just pad the array with zeros
else {
twoD[i][j] = 0;
}
}
}
//You might want to create another pair of loop to print the elements
//in the populated two dimensional array as follows
for (int i = 0; i < twoD.length; i++) {
for (int j = 0; j < twoD[i].length; j++) {
System.out.print(twoD[i][j] + " ");
}
System.out.println("");
}
} //End of first method
//Second method with String array as parameter
public static void convert2D(String[] oneD) {
//1. First calculate the number of columns
//a. get the length of the one dimensional array
int arraylength = oneD.length;
//b. find the square root of the length and typecast it into a float
float squareroot = (float) Math.sqrt(arraylength);
//c. round off the result and save in a variable called row
int row = Math.round(squareroot);
//2. Secondly, calculate the number of columns
//a. if the square of the number of rows is greater than or equal to the length of
//the one dimensional array, then to minimize padding, the number of
//columns is the same as the number of rows.
//b. otherwise, the number of columns in one more than the
//number of rows.
int col = (row * row >= arraylength) ? row : row + 1;
//3. Create a 2D String array with the number of rows and cols
String[][] twoD = new String[row][col];
//4. Place the elements in the one dimensional array into the two
// dimensional array.
//a. First create a variable counter to control the cycle through the one
// dimensional array.
int counter = 0;
//b. Create two for loops to loop through the rows and columns of the
//two dimensional array.
for (int i = 0; i < row; i++) {
for (int j = 0; j < col; j++) {
//if counter is less then the length of the one dimensional array,
//then copy the element at that position into the two dimensional
//array. And also increment counter by one.
if (counter < oneD.length) {
twoD[i][j] = oneD[counter];
counter++;
}
//Otherwise, just pad the array with null values
else {
twoD[i][j] = null;
}
}
}
//You might want to create another pair of loop to print the elements
//in the populated two dimensional array as follows:
for (int i = 0; i < twoD.length; i++) {
for (int j = 0; j < twoD[i].length; j++) {
System.out.print(twoD[i][j] + " ");
}
System.out.println("");
}
} // End of the second method
//Create the main method
public static void main(String[] args) {
//1. Create an arbitrary one dimensional int array
int[] x = {23, 3, 4, 3, 2, 4, 3, 3, 5, 6, 5, 3, 5, 5, 6, 3};
//2. Create an arbitrary two dimensional String array
String[] names = {"abc", "john", "dow", "doe", "xyz"};
//Call the respective methods
convert2D(x);
System.out.println("");
convert2D(names);
} // End of the main method
} // End of class definition
=========================================================
==========================================================
Sample Output23 3 4 3
2 4 3 3
5 6 5 3
5 5 6 3
abc john dow
doe xyz null
==========================================================
Explanation:The above code has been written in Java and it contains comments explaining each line of the code. Please go through the comments. The actual executable lines of code are written in bold-face to distinguish them from the comments.
What is blue L.E.D. light
customer seeks to buy a new computer for private use at home. The customer primarily needs the computer to use the Microsoft PowerPoint application for the purpose of practicing presentation skills. As a salesperson what size hard disc would you recommend and why?
Explanation:
The most reliable hard drives are those whose most common size is 3.5 inches, their advantages are their storage capacity and their speed and a disadvantage is that they usually make more noise.
For greater speed, it is ideal to opt for two smaller hard disks, since large disks are slower, but are partitioned so that there are no problems with file loss.
For a person who needs to use content creation programs, it is ideal to opt for a hard drive that has reliability.
g Create your own data file consisting of integer, double or String values. Create your own unique Java application to read all data from the file echoing the data to standard output. After all data has been read, display how many data were read. For example, if 10 integers were read, the application should display all 10 integers and at the end of the output, print "10 data values were read" Demonstrate your code compiles and runs without issue. Respond to other student postings by enhancing their code to write the summary output to a file instead of standard output.
Answer:
See explaination
Explanation:
//ReadFile.java
import java.io.File;
import java.io.FileNotFoundException;
import java.util.Scanner;
public class ReadFile
{
public static void main(String[] args)
{
int elementsCount=0;
//Create a File class object
File file=null;
Scanner fileScanner=null;
String fileName="sample.txt";
try
{
//Create an instance of File class
file=new File(fileName);
//create a scanner class object
fileScanner=new Scanner(file);
//read file elements until end of file
while (fileScanner.hasNext())
{
double value=fileScanner.nextInt();
elementsCount++;
}
//print smallest value
System.out.println(elementsCount+" data values are read");
}
//Catch the exception if file not found
catch (FileNotFoundException e)
{
System.out.println("File Not Found");
}
}
}
Sample output:
sample.txt
10
20
30
40
50
output:
5 data values are read
How has the Aswan High Dem had an adverse effect on human health?
Answer:
How was the Aswan high dam had an adverse effect on human health? It created new ecosystems in which diseases such as malaria flourished. An environmental challenge facing the Great Man Made River is that pumping water near the coast. ... Water scarcity makes it impossible to grow enough food for the population.
Explanation:
Design and implement the Heap.h header using the given Heap class below:
template
class Heap
public:
Heap();
Heap(const T elements[], int arraySize); //
Remove the root from the heap and maintain the heap property
T remove() throw (runtime_error);
// Insert element into the heap and maintain the heap property
void add(const T& element);
// Get the number of element in the heap
int getSize() const;
private:
vector v;
Removing the root in a heap - after the root is removed, the tree must be rebuilt to maintain the heap property:
Move the last node to replace the root;
Let the root be the current node;
While (the current node has children and the current node is smaller than one of its children) Swap the current node with the larger of its children; The current node now is one level down;}
Adding a new node - to add a new node to the heap, first add it to the end of the heap and then rebuild the tree as follows:
Let the last node be the current node;
While (the current node is greater than its parent)
{Swap the current node with its parent; The current node now is one level up:}
To test the header file, write the heapSort function and use the following main program:
#include
#include "Heap.h"
using namespace std;
template
void heapSort(T list[], int arraySize) 1/
your code here .. p
int main()
const int SIZE = 9;
int list[] = { 1, 2, 3, 4, 9, 11, 3, 1, 2 }; heapSort(list, SIZE);
cout << "Sorted elements using heap: \n";
for (int i = 0; i < SIZE; i++) cout << list[i] << " ";
cout << endl;
system("pause");
return;
Sample output:
Sorted elements using heap:
1 1 2 3 3 4 7 9 11
Answer:
See explaination
Explanation:
/* Heap.h */
#ifndef HEAP_H
#define HEAP_H
#include<iostream>
using namespace std;
template<class T>
class Heap
{
public:
//constructor
Heap()
{
arr = nullptr;
size = maxsize = 0;
}
//parameterized constructor
Heap(const T elements[], int arraySize)
{
maxsize = arraySize;
size = 0;
arr = new T[maxsize];
for(int i=0; i<maxsize; i++)
{
add(elements[i]);
}
}
//Remove the root from the heap and maintain the heap property
T remove() //code is altered
{
T item = arr[0];
arr[0] = arr[size-1];
size--;
T x = arr[0];
int parent = 0;
while(1)
{
int child = 2*parent + 1;
if(child>=size) break;
if(child+1 < size &&arr[child+1]>arr[child])
child++;
if(x>=arr[child]) break;
arr[parent] = arr[child];
parent = child;
}
arr[parent] = x;
return item;
}
//Insert element into the heap and maintain the heap property
void add(const T&element)
{
if(size==0)
{
arr[size] = element;
size++;
return;
}
T x = element;
int child = size;
int parent = (child-1)/2;
while(child>0 && x>arr[parent])
{
arr[child] = arr[parent];
child = parent;
parent = (child-1)/2;
}
arr[child] = x;
size++;
}
//Get the number of element in the heap
int getSize() const
{
return size;
}
private:
T *arr; //code is altered
int size, maxsize;
};
#endif // HEAP_H
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/* main.cpp */
#include<iostream>
#include "Heap.h"
using namespace std;
template <typename T>
void heapSort(T list[], int arraySize)
{
Heap<T> heap(list, arraySize);
int n = heap.getSize();
for(int i=n-1; i>0; i--)
{
list[i] = heap.remove();
}
}
int main()
{
const int SIZE = 9;
int list[] = {1, 7, 3, 4, 9, 11, 3, 1, 2};
heapSort<int>(list, SIZE);
cout << "Sorted elements using heap: \n";
for (int i = 0; i < SIZE; i++)
cout << list[i] << " ";
cout <<endl;
system("pause");
return 0;
}
(34+65+53+25+74+26+41+74+86+24+875+4+23+5432+453+6+42+43+21)°
3. You are working for a usability company that has recently completed a usability study of an airline ticketing system. They conducted a live AB testing of the original website and a new prototype your team developed. They brought in twenty participants into the lab and randomly assigned them to one of two groups: one group assigned to the original website, and the other assigned to the prototype. You are provided with the data and asked to perform a hypothesis test. Using the standard significance value (alpha level) of 5%, compute the four step t-test and report all important measurements. You can use a calculator or SPSS or online calculator to compute the t-test. (4 pts)
Answer:
Check the explanation
Explanation:
Let the population mean time on task of original website be [tex]\mu_1[/tex] and that of new prototype be [tex]\mu_2[/tex]
Here we are to test
[tex]H_0:\mu_1=\mu_2\;\;against\;\;H_1:\mu_1<\mu_2[/tex]
The data are summarized as follows:
Sample 1 Sample 2
Sample size n=20 n=20
Sample mean [tex]\bar{x}_1=243.4[/tex] [tex]\bar{x}_2=253.4[/tex]
Sample SD s1=130.8901 s2=124.8199
The test statistic is obtained from online calculator as
t=-0.23
The p-value is given by 0.821
As the p-value is more than 0.05, we fail to reject the null hypothesis at 5% level of significance and hence conclude that there is no statistically significant difference between the original website and the prototype developed by the team at 5% level of significance.
Kitchen Gadgets sells a line of high-quality kitchen utensils and gadgets. When customers place orders on the company’s Web site or through electronic data interchange (EDI), the system checks to see if the items are in stock, issues a status message to the customer, and generates a shipping order to the warehouse, which fills the order. When the order is shipped, the customer is billed. The system also produces various reports.
1. List four elements used in DFDs, draw the symbols, and explain how they are used.
2. Draw a context diagram for the order system.
3. Draw a diagram 0 DFD for the order system.
4. Explain the importance of leveling and balancing. Your boss, the IT director, wants you to explain FDDs, BPM, DFDs, and UML to a group of company managers and users who will serve on a systems development team for the new marketing system.
Answer:
Ahhhhh suckkkkkkkkkkk
3.34 LAB: Mad Lib - loops in C++
Mad Libs are activities that have a person provide various words, which are then used to complete a short story in unexpected (and hopefully funny) ways.
Write a program that takes a string and integer as input, and outputs a sentence using those items as below. The program repeats until the input is quit 0.
Ex: If the input is:
apples 5
shoes 2
quit 0
the output is:
Eating 5 apples a day keeps the doctor away.
Eating 2 shoes a day keeps the doctor away.
Make sure your answer is in C++.
Answer:
A Program was written to carry out some set activities. below is the code program in C++ in the explanation section
Explanation:
Solution
CODE
#include <iostream>
using namespace std;
int main() {
string name; // variables
int number;
cin >> name >> number; // taking user input
while(number != 0)
{
// printing output
cout << "Eating " << number << " " << name << " a day keeps the doctor away." << endl;
// taking user input again
cin >> name >> number;
}
}
Note: Kindly find an attached copy of the compiled program output to this question.
In this exercise we have to use the knowledge in computational language in C++ to describe a code that best suits, so we have:
The code can be found in the attached image.
What is looping in programming?In a very summarized way, we can describe the loop or looping in software as an instruction that keeps repeating itself until a certain condition is met.
To make it simpler we can write this code as:
#include <iostream>
using namespace std;
int main() {
string name; // variables
int number;
cin >> name >> number; // taking user input
while(number != 0)
{
// printing output
cout << "Eating " << number << " " << name << " a day keeps the doctor away." << endl;
// taking user input again
cin >> name >> number;
}
}
See more about C++ at brainly.com/question/19705654
Suppose that a program's data and executable code require 1,024 bytes of memory. A new section of code must be added; it will be used with various values 70 times during the execution of a program. When implemented as a macro, the macro code requires 73 bytes of memory. When implemented as a procedure, the procedure code requires 132 bytes (including parameter-passing, etc.), and each procedure call requires 7 bytes. How many bytes of memory will the entire program require if the new code is added as a procedure? 1,646
Answer:
The answer is 1646
Explanation:
The original code requires 1024 bytes and is called 70 times ,it requires 7 byte and its size is 132 bytes
1024 + (70*7) + 132 = 1024 + 490 +132
= 1646
Caches are important to providing a high-performance memory hierarchy to processors. Below is a list of 32-bits memory address references given as word addresses. 0x03, 0xb4, 0x2b, 0x02, 0xbf, 0x58, 0xbe, 0x0e, 0xb5, 0x2c, 0xba, 0xfd For each of these references identify the binary word address, the tag, and the index given a direct mapped cache with 16 one-word blocks. Also list whether each reference is a hit or a miss, assuming the cache is initially empty.
Answer:
See explaination
Explanation:
please kindly see attachment for the step by step solution of the given problem.
Describe the Software Development Life Cycle. Describe for each phase of the SDLC how it can be used to create software for an Employee Payroll System that allows employees to log the number of hours completed in a work period and then generate their pay. Use Microsoft Word to complete this part of the assessment. Save your file as LASTNAME FIRSTNAME M08FINAL1 were LASTNAME is your lastname and FIRSTNAME is your first name. Upload your answer to this question; do not submit this assessment until you have completed all questions. This question is worth 25 points.
Answer:
Check the explanation
Explanation:
SDLC
SDLC stands for Software Development Life Cycle
It provides steps for developing a software product
It also checks for the quality and correctness of a software
The main aim of SDLC is to develop a software, which meets a customer requirements
SDLC involves various phases to develop a high-quality product for its end user
Phases of SDLC
There are seven phases in a software development life cycle as follows,
Requirement Analysis Feasibility Study Design Coding Testing Deployment Maintenance
kindly check the attached image below
Requirement analysis
This is the first stage in a SDLC.
In this phase, a detailed and precise requirements are collected from various teams by senior team members
It gives a clear idea of the entire project scope, opportunities and upcoming issues in a project
This phase also involves, planning assurance requirements and analyze risk involved in the project
Here, the timeline to finish the project is finalized
Feasibility Study
In this stage, the SRS document, that is “Software Requirement Specification” document is defined, which includes everything to be designed and developed during the life cycle of a project
Design
In this phase as the name indicates, software and system design documents are prepared, based on the requirement specification document
This enable us to define the whole system architecture
Two types of design documents are prepared in this phase as follows,
High-Level Design
Low-Level Design
Coding
In this phase, the coding of project is done in a selected programming language
Tasks are divided into many units and given to various developers
It is the longest phase in the SDLC
Testing
In this stage, the developed coding is tested by the testing team
The testing team, checks the coding in the user point of view
Installation/Deployment
In this stage, a product is released by the company to the client
Maintenance
Once the product is delivered to the client, the maintenance phase work will start by fixing errors, modifying and enhancing the product.
Employee Payroll System
Requirement analysis
Gather information from various team for requirement
Analyze the number of employees to handle the project
Timeline to finish the project, eg.1 month
Feasibility Study
The system requirements such as how many systems are required
Decide which software to be installed to handle the project.
For example, if we are going to develop the software using C language, then software for that has to be installed
The SRS document has to be prepared
Design
In this the HLD and LLD is prepared, the overall software architecture is prepared
The modules involved in coding are decided
Here the modules can be employee, payroll manager, Employee Log time, account details
The input and output are designed, such as employee name is the input and output is the salary for him, based on working hours
Coding
Here the coding is divided into various sections and given to 2 or more employees
One may code employee detail, one will code working hours of employees and one may code the banking details of employee
Testing
The coding is tested for syntax, declaration, data types and various kinds of error
The testing team will test the coding with various possible values
They may even check with wrong values and analyze the output for that
Installation
Now the software is installed in the client system and the client is calculating the payroll for an employee based on working hours in a month
Maintenance
If any error occurs, the team will clear the issue.
When a new employee joins, then the employee data will added to the database and the database is updated
Also if the client asks for any new features, it will done in this phase.
Fill in the empty function so that it returns the sum of all the divisors of a number, without including it. A divisor is a number that divides into another without a remainder. in python
Program explanation:
In the given program code, a method "sum_divisors" is declared that takes "n" variable in its parameter.Inside the method, the "s" variable is declared, which holds a value which is "0", and used a for loop that defines counts the range values.In the loop, a conditional statement is declared that check remainder value equal to 0 and adds value in "s" variable and return its value.Program code:
def sum_divisors(n):#defining a method sum_divisors that takes a parameter
s = 0#defining a variable s that hold a value 0
for x in range(1,n):#defining a for loop that use n variable to check range value
if(n%x==0):#use if to check remainder value equal to 0
s += x#adding value in s variable
return s#return s value
print(sum_divisors(6))#calling method
print(sum_divisors(12))#calling method
Output:
Please find the attached file.
Learn more:
brainly.com/question/14704583
To encrypt messages I propose the formula C = (3P + 1) mod 27, where P is the "plain text" (the original letter value) and C is the "cipher text" (the encrypted letter value). For example, if P = 2 (the letter 'c' ), C would be 7 (the letter 'h') since (3(2) + 1) mod 27 = 7. There is a problem though: When I send the message 'c' to my friend, encrypted as 'h', they don't know whether the original message was 'c' or another letter that also encrypts to 'h'. What other letter(s) would also encrypt to 'h' besides 'c' in this system?
Answer:
C = (3P+1) % 27
so when P will be max 26,when P is 26 the (3P+1) = 79. And 79/27 = 2 so let's give name n = 2.
Now doing reverse process
We get ,
P = ((27*n)+C-1)/3
Where n can be 0,1,2
So substituting value of n one by one and the C=7(corresponding index of h)
For n= 0,we get P=2, corresponding char is 'c'
For n=1,we get P=11, corresponding char is 'l'
For n=2,we get P= 20, corresponding cahr is 'u'.
So beside 'c',the system will generate 'h' for 'l' and 'u' also.
For dinner, a restaurant allows you to choose either Menu Option A: five appetizers and three main dishes or Menu Option B: three appetizers and four main dishes. There are six kinds of appetizer on the menu and five kinds of main dish.
How many ways are there to select your menu, if...
a. You may not select the same kind of appetizer or main dish more than once.
b. You may select the same kind of appetizer and/or main dish more than once.
c. You may select the same kind of appetizer or main dish more than once, but not for all your choices, For example in Menu Option A, it would be OK to select four portions of 'oysters' and one portion of 'pot stickers', but not to select all five portions of 'oysters'.)
In each case show which formula or method you used to derive the result.
Answer:
The formula used in this question is called the probability of combinations or combination formula.
Explanation:
Solution
Given that:
Formula applied is stated as follows:
nCr = no of ways to choose r objects from n objects
= n!/(r!*(n-r)!)
The Data given :
Menu A : 5 appetizers and 3 main dishes
Menu B : 3 appetizers and 4 main dishes
Total appetizers - 6
Total main dishes - 5
Now,
Part A :
Total ways = No of ways to select menu A + no of ways to select menu B
= (no of ways to select appetizers in A)*(no of ways to select main dish in A) + (no of ways to select appetizers in B)*(no of ways to select main dish in B)
= 6C5*5C3 + 6C3*5C4
= 6*10 + 20*5
= 160
Part B :
Since, we can select the same number of appetizers/main dish again so the number of ways to select appetizers/main dishes will be = (total appetizers/main dishes)^(no of appetizers/main dishes to be selected)
Total ways = No of ways to select menu A + no of ways to select menu B
= (no of ways to select appetizers in A)*(no of ways to select main dish in A) + (no of ways to select appetizers in B)*(no of ways to select main dish in B)
= (6^5)*(5^3) + (6^3)*(5^4)
= 7776*125 + 216*625
= 1107000
Part C :
No of ways to select same appetizers and main dish for all the options
= No of ways to select menu A + no of ways to select menu B
= (no of ways to select appetizers in A)*(no of ways to select main dish in A) + (no of ways to select appetizers in B)*(no of ways to select main dish in B)
=(6*5) + (6*5)
= 60
Total ways = Part B - (same appetizers and main dish selected)
= 1107000 - 60
= 1106940
Create a program that generates a report that displays a list of students, classes they are enrolled in and the professor who teaches that class. There are 3 files that provide the input data: 1. FinalRoster.txt : List of students and professors ( S: student, P: professor) Student row: S,Student Name, StudentID Professor row: P, Professor Name, Professor ID, Highest Education 2. FinalClassList.txt: List of classes and professor who teach them (ClassID, ClassName, ID of Professor who teach that class) 3. FinalStudentClassList.txt: List of classes the students are enrolled in. (StudentID, ClassID) The output shall be displayed on screen and stored in a file in the format described in FinalOutput.txt You will need to apply all course concepts in your solution. 1. Student and Professor should be derived from a super class "Person" 2. Every class should implement toString method to return data in the format required for output 3. Exception handling (e.g. FileNotFound etc.) must be implemented 4. Source code must be documented in JavaDoc format 5. Do not hard code number of students, professors or classes. Submit source Java files, the output file and screenshot of the output in a zip format
Answer:
All the classes are mentioned with code and screenshots. . That class is shown at last.
Explanation:
Solution
Class.Java:
Code
**
* atauthor your_name
* This class denotes Class at the college.
*
*/
public class Class {
private String className,classID;
private Professor professor;
/**
* atparam className
* atparam classID
* atparam professor
*/
public Class(String className, String classID, Professor professor) {
this.classID=classID;
this.className=className;
this.professor=professor;
}
/**
* at return classID of the class
*/
public String getClassID() {
return classID;
}
/**
* Override toString() from Object Class
*/
public String toString() {
return classID+" "+className+" "+professor.getName()+" "+professor.getEducation();
}
}
Person.Java:
Code:
/**
* atauthor your_name
* This class represents Person
*
*/
public class Person {
protected String name;
/**method to fetch name
* at return
*/
public String getName() {
return name;
}
/**method to set name
* at param name
*/
public void setName(String name) {
this.name = name;
}
Professor.java:
Code:
import java.util.ArrayList;
import java.util.List;
/**
* at author your_name
*
*This class represents professors
*
*/
public class Professor extends Person{
private String professorID, education;
private List<Class> classes=new ArrayList<Class>();
/**
* at param name
* at param professorID
* at param education
*/
public Professor(String name,String professorID,String education) {
this.name=name;
this.professorID=professorID;
this.education=education;
}
/**
* at return
*/
public String getEducation() {
return this.education;
}
/**
* at return
*/
public String getprofessorID() {
return this.professorID;
}
/** to add classes
* at param Class
*/
public void addClass(Class c) {
classes.add(c);
}
/**
* Override toString() from Object Class
*/
public String toString() {
String result=this.getName()+" - "+professorID+" - "+education;
for(Class c:classes) {
result+=c.toString()+"\n";
}
return result;
}
}
}
Student.java:
Code:
import java.util.ArrayList;
import java.util.List;
/**
* This class represents students
* at author your_Name
*
*/
public class Student extends Person{
private String studentID;
private List<Class> classes=new ArrayList<Class>();
/**
* atparam name
* atparam studentID
*/
public Student(String name,String studentID) {
this.name=name;
this.studentID=studentID;
}
/**
* atreturn
*/
public String getStudentID() {
return studentID;
}
/**
* atparam c
*/
public void addClass(Class c) {
classes.add(c);
}
/**
* atreturn
*/
public int getClassCount() {
return classes.size();
}
/**
* Override toString() from Object Class
*/
public String toString() {
String result=this.getName()+" - "+studentID+"\n";
for(Class c:classes) {
result+=c.toString()+"\n";
}
return result;
}
}
NOTE: Kindly find an attached copy of screenshot of the output, which is a part of the solution to this question
Assume the existence of an UNSORTED ARRAY of n characters. You are to trace the CS111Sort algorithm (as described here) to reorder the elements of a given array. The CS111Sort algorithm is an algorithm that combines the SelectionSort and the InsertionSort following the steps below: 1. Implement the SelectionSort Algorithm on the entire array for as many iterations as it takes to sort the array only to the point of ordering the elements so that the last n/2 elements are sorted in increasing (ascending) order. 2. Implement the InsertionSort Algorithm to sort the first half of the resulting array elements so that these elements are sorted in decreasing (descending) order.
Answer:
class Main {
public static void main(String[] args) {
char arr[] = {'T','E','D','R','W','B','S','V','A'};
int n = arr.length;
System.out.println("Selection Sort:");
System.out.println("Iteration\tArray\tComparisons");
long comp1 = selectionSort(arr);
System.out.println("Total comparisons: "+comp1);
System.out.println("\nInsertion Sort:");
System.out.println("Iteration\tArray\tComparisons");
long comp2 = insertionSort(arr);
System.out.println("Total Comparisons: "+comp2);
System.out.println("\nOverall Total Comparisons: "+(comp1+comp2));
}
static long selectionSort(char arr[]) {
// applies selection sort for n/2 elements
// returns number of comparisons
int n = arr.length;
long comparisons = 0;
// One by one move boundary of unsorted subarray
for (int i = n-1; i>=n-n/2; i--) {
// Find the minimum element in unsorted array
int max_idx = i;
for (int j = i-1; j>=0; j--) {
// there is a comparison everytime this loop returns
comparisons++;
if (arr[j] > arr[max_idx])
max_idx = j;
}
// Swap the found minimum element with the first
// element
char temp = arr[max_idx];
arr[max_idx] = arr[i];
arr[i] = temp;
System.out.print(n-1-i+"\t");
printArray(arr);
System.out.println("\t"+comparisons);
}
return comparisons;
}
static long insertionSort(char arr[]) {
// applies insertion sort for n/2 elements
// returns number of comparisons
int n = arr.length;
n = n-n/2; // sort only the first n/2 elements
long comparisons = 0;
for (int i = 1; i < n; ++i) {
char key = arr[i];
int j = i - 1;
/* Move elements of arr[0..i-1], that are
greater than key, to one position ahead
of their current position */
while (j >= 0) {
// there is a comparison everytime this loop runs
comparisons++;
if (arr[j] > key) {
arr[j + 1] = arr[j];
} else {
break;
}
j--;
}
arr[j + 1] = key;
System.out.print(i-1+"\t");
printArray(arr);
System.out.println("\t"+comparisons);
}
return comparisons;
}
static void printArray(char arr[]) {
for (int i=0; i<arr.length; i++)
System.out.print(arr[i]+" ");
}
}
Explanation:
Explanation is in the answer.
(TCO 4) Give the contents of Register A after the execution of the following instructions:
Data_1 EQU $12
Data_2 EQU %01010101
LDAA #Data_1
ADDA #Data_2
A) $12
B) $67
C) $55
D) $57
In this lab, you use the flowchart and pseudocode found in the figures below to add code to a partially created C++ program. When completed, college admissions officers should be able to use the C++ program to determine whether to accept or reject a student, based on his or her test score and class rank.
// HouseSign.cpp - This program calculates prices for custom made signs.
#include
#include
using namespace std;
int main()
{
// This is the work done in the housekeeping() function
// Declare and initialize variables here
// Charge for this sign
// Color of characters in sign
// Number of characters in sign
// Type of wood
// This is the work done in the detailLoop() function
// Write assignment and if statements here
// This is the work done in the endOfJob() function
// Output charge for this sign
cout << "The charge for this sign is $" << charge << endl;
return(0);
}
Here is the complete question.
In this lab, you use the flowchart and pseudocode found in the figures below to add code to a partially created C++ program. When completed, college admissions officers should be able to use the C++ program to determine whether to accept or reject a student, based on his or her test score and class rank.
start input testScore,
classRank if testScore >= 90 then if classRank >= 25 then output "Accept"
else output "Reject" endif else if testScore >= 80
then if classRank >= 50 then output "Accept" else output "Reject" endif
else if testScore >= 70
then if classRank >= 75 then output "Accept"
else output "Reject"
endif else output "Reject"
endif
endif
endif
stop
Study the pseudocode in picture above. Write the interactive input statements to retrieve: A student’s test score (testScore) A student's class rank (classRank) The rest of the program is written for you. Execute the program by clicking "Run Code." Enter 87 for the test score and 60 for the class rank. Execute the program by entering 60 for the test score and 87 for the class rank.
[comment]: <> (3. Write the statements to convert the string representation of a student’s test score and class rank to the integer data type (testScore and classRank, respectively).)
Function: This program determines if a student will be admitted or rejected. Input: Interactive Output: Accept or Reject
*/ #include using namespace std; int main() { // Declare variables
// Prompt for and get user input
// Test using admission requirements and print Accept or Reject
if(testScore >= 90)
{ if(classRank >= 25)
{ cout << "Accept" << endl; }
else
cout << "Reject" << endl; }
else { if(testScore >= 80)
{ if(classRank >= 50)
cout << "Accept" << endl;
else cout << "Reject" << endl; }
else { if(testScore >= 70)
{ if(classRank >=75) cout << "Accept" << endl;
else cout << "Reject" << endl; }
else cout << "Reject" << endl; } } } //End of main() function
Answer:
Explanation:
The objective here is to use the flowchart and pseudocode found in the figures below to add code to a partially created C++ program. When completed, college admissions officers should be able to use the C++ program to determine whether to accept or reject a student, based on his or her test score and class rank.
PROGRAM:
#include<iostream>
using namespace std;
int main(){
// Declare variables
int testScore, classRank;
// Prompt for and get user input
cout<<"Enter test score: ";
cin>>testScore;
cout<<"Enter class rank: ";
cin>>classRank;
// Test using admission requirements and print Accept or Reject
if(testScore >= 90)
{ if(classRank >= 25)
{ cout << "Accept" << endl; }
else
cout << "Reject" << endl;
}
else { if(testScore >= 80)
{ if(classRank >= 50)
cout << "Accept" << endl;
else cout << "Reject" << endl; }
else { if(testScore >= 70)
{ if(classRank >=75) cout << "Accept" << endl;
else cout << "Reject" << endl;
}
else cout << "Reject" << endl; }
}
return 0;
} //End of main() function
OUTPUT:
See the attached file below:
4. Write an interface ObjectWithTwoParameters which has a method specification: double area (double d1, double d2) which returns the area of a particular object. Write three classes RectangleClass, TriangleClass, and CylinderClass which implement the interface you created. Also, write a demo class which creates objects of RectangleClass, TriangleClass, and CylinderClass and call the corresponding methods
Answer:
The java program for the given scenario is as follows.
import java.util.*;
//interface with method area
interface ObjectWithTwoParameters
{
double area (double d1, double d2);
}
class RectangleClass implements ObjectWithTwoParameters
{
//overriding area()
public double area (double d1, double d2)
{
return d1*d2;
}
}
class TriangleClass implements ObjectWithTwoParameters
{
//overriding area()
public double area (double d1, double d2)
{
return (d1*d2)/2;
}
}
class CylinderClass implements ObjectWithTwoParameters
{
public double area (double d1, double d2)
{
return ( 2*3.14*d1*d1 + d2*(2*3.14*d1) );
}
}
public class Test
{
public static void main(String[] args)
{
//area displayed for all three shapes
ObjectWithTwoParameters r = new RectangleClass();
double arear = r.area(2, 3);
System.out.println("Area of rectangle: "+arear);
ObjectWithTwoParameters t = new TriangleClass();
double areat = t.area(4,5);
System.out.println("Area of triangle: "+areat);
ObjectWithTwoParameters c = new CylinderClass();
double areac = c.area(6,7);
System.out.println("Area of cylinder: "+areac);
}
}
OUTPUT
Area of rectangle: 6.0
Area of triangle: 10.0
Area of cylinder: 489.84
Explanation:
1. The program fulfils all the mentioned requirements.
2. The program contains one interface, ObjectWithTwoParameters, three classes which implement that interface, RectangleClass, TriangleClass and CylinderClass, and one demo class, Test, containing the main method.
3. The method in the interface has no access specifier.
4. The overridden methods in the three classes have public access specifier.
5. No additional variables have been declared.
6. The test class having the main() method is declared public.
7. The area of the rectangle, triangle and the cylinder have been computed as per the respective formulae.
8. The interface is similar to a class which can have only declarations of both, variables and methods. No method can be defined inside an interface.
9. The other classes use the methods of the interface by implementing the interface using the keyword, implements.
10. The object is created using the name of the interface as shown.
ObjectWithTwoParameters r = new RectangleClass();
Select the correct navigational path to create the function syntax to use the IF function.
Click the Formula tab on the ribbon and look in the ???
'gallery
Select the range of cells.
Then, begin the formula with the ????? click ?????. and click OK.
Add the arguments into the boxes for Logical Test, Value_if_True, and Value_if_False.
Answer:
1. Logical
2.=
3.IF
Explanation:
just did the assignment
Write an expression to detect that the first character of userinput matches firstLetter.
import java.util.Scanner; public class CharMatching { public static void main (String [] args) { Scanner scnr = new Scanner(System.in); String userInput; char firstLetter; userInput = scnr.nextLine(); firstLetter = scnr.nextLine().charAt(0); if (/* Your solution goes here */) { System.out.println("Found match: " + firstLetter); } else { System.out.println("No match: " + firstLetter); } return; } }
Answer: Provided in the explanation segment
Explanation:
Below is the code to run this program.
we have that the
Program
import java.util.Scanner;
public class CharMatching {
public static void main(String[] args) {
//Scanner object for keyboard read
Scanner scnr=new Scanner(System.in);
//Variable for user input string
String userInput;
//Variable for firstletter input
char firstLetter;
//Read user input string
userInput=scnr.nextLine();
//Read first letter from user
firstLetter=scnr.nextLine().charAt(0);
//Comparison without case sensititvity and result
if(Character.toUpperCase(firstLetter)==Character.toUpperCase(userInput.charAt(0))) {
System.out.println("Found match: "+firstLetter);
}
else {
System.out.println("No match: "+firstLetter);
}
}
}
Output
Hello
h
Found match: h
cheers i hope this helped !!!
The Taylor series expansion for ax is: Write a MATLAB program that determines ax using the Taylor series expansion. The program asks the user to type a value for x. Use a loop for adding the terms of the Taylor series. If cn is the nth term in the series, then the sum Sn of the n terms is . In each pass calculate the estimated error E given by . Stop adding terms when . The program displays the value of ax. Use the program to calculate: (a) 23.5 (b) 6.31.7 Compare the values with those obtained by using a calculator.
Answer: (a). 11.3137
(b). 22.849
Explanation:
Provided below is a step by step analysis to solving this problem
(a)
clc;close all;clear all;
a=2;x=3.5;
E=10;n=0;k=1;sn1=0;
while E >0.000001
cn=((log(a))^n)*(x^n)/factorial(n);
sn=sn1+cn;
E=abs((sn-sn1)/sn1);
sn1=sn;
n=n+1;
k=k+1;
end
fprintf('2^3.5 from tailor series=%6.4f after adding n=%d terms\n',sn,n);
2^3.5 from tailor series=11.3137 after adding n=15 terms
disp('2^3.5 using calculator =11.3137085');
Command window:
2^3.5 from tailor series=11.3137 after adding n=15 terms
2^3.5 using calculator =11.3137085
(b)
clc;close all;clear all;
a=6.3;x=1.7;
E=10;n=0;k=1;sn1=0;
while E >0.000001
cn=((log(a))^n)*(x^n)/factorial(n);
sn=sn1+cn;
E=abs((sn-sn1)/sn1);
sn1=sn;
n=n+1;
k=k+1;
end
fprintf('6.3^1.7 from tailor series=%6.4f after adding n=%d terms\n',sn,n);
disp('6.3^1.7 using calculator =22.84961748');
Command window:
6.3^1.7 from tailor series=22.8496 after adding n=16 terms
6.3^1.7 using calculator =22.84961748
cheers i hope this helped !!!
The equation of certain traveling waves is y(x.t) = 0.0450 sin(25.12x - 37.68t-0.523) where x and y are in
meters, and t in seconds. Determine the following:
(a) Amplitude. (b) wave number (C) wavelength. (d) angular frequency. (e) frequency: (1) phase angle, (g) the
wave propagation speed, (b) the expression for the medium's particles velocity as the waves pass by them, and (i)
the velocity of a particle that is at x=3.50m from the origin at t=21.os
Answer:
A. 0.0450
B. 4
C. 0.25
D. 37.68
E. 6Hz
F. -0.523
G. 1.5m/s
H. vy = ∂y/∂t = 0.045(-37.68) cos (25.12x - 37.68t - 0.523)
I. -1.67m/s.
Explanation:
Given the equation:
y(x,t) = 0.0450 sin(25.12x - 37.68t-0.523)
Standard wave equation:
y(x, t)=Asin(kx−ωt+ϕ)
a.) Amplitude = 0.0450
b.) Wave number = 1/ λ
λ=2π/k
From the equation k = 25.12
Wavelength(λ ) = 2π/25.12 = 0.25
Wave number (1/0.25) = 4
c.) Wavelength(λ ) = 2π/25.12 = 0.25
d.) Angular frequency(ω)
ωt = 37.68t
ω = 37.68
E.) Frequency (f)
ω = 2πf
f = ω/2π
f = 37.68/6.28
f = 6Hz
f.) Phase angle(ϕ) = -0.523
g.) Wave propagation speed :
ω/k=37.68/25.12=1.5m/s
h.) vy = ∂y/∂t = 0.045(-37.68) cos (25.12x - 37.68t - 0.523)
(i) vy(3.5m, 21s) = 0.045(-37.68) cos (25.12*3.5-37.68*21-0.523) = -1.67m/s.
Which of the following is an example of the rewards & consequences characteristic of an organization?
OOO
pay raise
time sheets
pay check
pay scale
Answer:
Pay raise is an example of the rewards & consequences characteristic of an organization.
what should i name my slideshow if its about intellectual property, fair use, and copyright
Answer:
You should name it honest and sincere intention
Explanation:
That is a good name for what you are going to talk about in your slideshow.
What do we call data that's broken down into bits and sent through a network?
Answer:
Bits
Explanation:
Dave owns a construction business and is in the process of buying a laptop. He is looking for a laptop with a hard drive that will likely continue to function if the computer is dropped. Which type of hard drive does he need?
Answer:
Solid state drive
Explanation:
The term solid-state drive is used for the electronic circuitry made entirely from semiconductors. This highlights the fact that the main storage form, in terms of a solid-state drive, is via semiconductors instead of a magnetic media for example a hard disk. In lieu of a more conventional hard drive, SSD is built to live inside the device. SSDs are usually more resistant to physical shock in comparison to the electro-mechanical drives and it functions quietly and has faster response time. Therefore, SSD will be best suitable for the Dave.
6 things you should consider when planning a PowerPoint Presentation.
Answer: I would suggest you consider your audience and how you can connect to them. Is your presentation, well, presentable? Is whatever you're presenting reliable and true? Also, no more than 6 lines on each slide. Use colors that contrast and compliment. Images, use images. That pulls whoever you are presenting to more into your presentation.
Explanation:
Write a program named RectangleArea to calculate the area of a rectangle with a length of 15.8 and a width of 7.9. The program should have two classes, one is the RectangleArea holding the Main(), and the other one is Rectangle. The Rectangle class has three members: a property of length, a property of width, and a method with a name of CalArea() to calculate the area. You can invoke the auto-provided constructor or write a self-defined constructor to initialize the rectangle. Calculate and display the area of the rectangle by first initialize an object named myRectangle and then calculate its area using the CalArea() method.
Answer:
public class RectangleArea {
public static void main(String[] args) {
Rectangle myRectangle = new Rectangle(15.8, 7.9);
double calArea = myRectangle.calcArea(15.8, 7.9);
System.out.println("The area is "+ calArea);
}
}
class Rectangle{
private double length;
private double width;
//Defined Constructor
public Rectangle(double length, double width) {
this.length = length;
this.width = width;
}
public double calcArea(double len, double wi){
return len* wi;
}
}
Explanation:
This is solved with Java programming languageStart by creating both classes RectangleArea and and RectangleSInce both classes are in the same file, only one can be publicClass Rectangle contains the three members are decribed by the questionprivate double length, private double width and the method calcArea(). It also has a sefl-declared constructor.In the class RectangleArea, an object of Rectangle is created and initialized.The method calcArea is called using the created object and the value is printed.