write some uses of magnetic force​

Answers

Answer 1

Answer:

television,radios, microwave ovens, telephone system and computer

Answer 2
(i). Compass.
(ii). MRI Scanners.
(iii). Electric Motor.
(iv). Speakers.
(v). Refrigerators.
(vi). Computer.
(vii). Microwave.
(viii). Cars.

Related Questions

Define measurement with 10 points

Answers

Answer:

the process of comparing unknown quantities with known standards quantities are known as measurement

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

If the box of 500N is placed over the land of area of 2m²,what pressure is experted by the box on the land?​

Answers

Answer:

250 Pa or N/m^2

Explanation:

Pressure(P)=F/A=500/2=250 Pa or N/m^2


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

why is the fuse used in a circuit called safety fuse?

Answers

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

What is 98.907 rounded to 1 significant figure?

Answers

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

If the next number is 5 or more, we round up.If the next number is 4 or less, we do not round up.

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

The plane of a5cm*8cm rectangular loop of wire is parallel to a 0.19T magnetic field the loop carries a current of 6.2 A. What torque acts on aloop? What is the magnetic moment of the loop?

Answers

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why? ​

Answers

Answer:

difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.

Answers

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

is there any machine that is 100% efficient? why?why not

Answers

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

Robin fired a bullet of mass 100 gm from a gun of mass 5 kg. The bullet leaves the gun with a speed of 400 m/s. After penetrating 4 cm of a plank of 10 cm, the bullet loses one third of its initial velocity.
a. Calculate the backward velocity of the gun?
b. Can the bullet penetrate the plank of the wood completely? Explain mathematically.

please help

Answers

(a) The recoil or backward velocity of the gun is 8 m/s.

(b) The bullet cannot penetrate the plank of the wood completely.

The given parameters include;

mass of the bullet, m₁ = 100 g = 0.1 kgmass of the gun, m₂ = 5 kginitial velocity of the bullet, u₁ = 400 m/sthickness of the plank, x = 10 cm

(a) The backward or recoil velocity of the gun is calculated by applying the principle of conservation of linear momentum.

let the backward or recoil  velocity of the gun = u₂

m₁u₁  + m₂u₂ = 0

m₂u₂ = -m₁u₁

[tex]u_2 = -\frac{m_1u_1}{m_2} \\\\u_2 = - \frac{0.1 \times 400}{5} \\\\u_2 = -8 \ m/s[/tex]

Thus, the recoil or backward velocity of the gun is 8 m/s.

(b) determine if the bullet can penetrate the plank of the wood completely

the bullet traveled 4 cm and lost ¹/₃ of u₁the remaining distance to completely penetrate the plank = 6 cmthe final velocity of the bullet at 4 cm, v = 400 - ¹/₃ x 400 m/s  = 266.67 m/s

the acceleration of the bullet is calculated as;

v² = u₁² + 2as

2as = v² - u²

[tex]a = \frac{v^2 -u_1^2}{2s} \\\\a = \frac{(266.67)^2 -(400)^2}{2\times 0.04} = -1.111 \times 10^6 \ m/s^2[/tex]

Finally, determine the distance traveled by the bullet when it comes to a complete stop, that is the final velocity = 0

[tex]v_f^2 = v^2 + 2ad\\\\2ad = v_f^2 - v^2\\\\d = \frac{v_f^2 - v^2}{2a} \\\\d = \frac{(0) - (266.67)^2}{2(-1.111\times 10^6)} \\\\d = 0.032 \ m[/tex]

d = 3.2 cm

The total distance traveled by the bullet inside the plank = 4 cm + 3.2 cm = 7.2 cm

Therefore, the bullet cannot penetrate the plank completely.

To learn more about linear momentum visit: https://brainly.com/question/15869303

define electrical resistance in a metal conductor​

Answers

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

The fluid inside the hydraulic jack has a pressure of 30,000 Pa. If the surface of
the piston that is used to lift an object is 0.1 m’in area, how much weight can
the jack lift?​

Answers

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

You plan to pass alpha particles through a field that contains a consistent type of particle. Which configuration will result in the largest deflection of alpha particles? (1 point)

low-energy alpha particles passing through a field of low mass-number-particles

low-energy alpha particles passing through a field of high mass-number-particles

high-energy alpha particles passing through a field of high mass-number-particles

high-energy alpha particles passing through a field of low mass-number-particles

Answers

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Explanation:

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

differniate between Magnetic force and electrostatic force​

Answers

Answer:

magnetic force:

i) It is exerted by a magnet.

ii)Magnetic forces are always normal to the direction of the velocity of the charge it acts upon.

Electrostatic force

i) It is exerted by electrically charged body.

ii)Electric force are independent of the direction the charge moves in.

✌✌✌✌

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

what is required for force to come into play​

Answers

Answer:

An interaction of one object with another object results in a force between the two objects. Thus, at-least two objects must interact for a force to come into play.

Other Questions
Which of the following best describes the difference between a cation and an anion? 66. If the length of one side of a triangle 6 and the length of another side is 2, which of the following cannot be the length of the third side of the triangle?A) 8B) 7C) D) 5 write your answer in simplest radical form cos(30 +x) =5/3 find x Jack rides his bike 4 miles in 1/3 of an hour. What is jack unit rate in miles per hour? What does Cassius foreshadow to be the outcome of the war?A victory for his armyB. the falling of two eaglesC. defeat for his armyD. the return of Caesar's ghost similar right triangles, i need help with this please Second National Bank is considering adding 5 new ATM machines. Each machine costs $25,000 and installation costs are $15,000 per machine. Second National Bank expects the new machines to save $0.33 per transaction on 250,000 transactions per year on the new machines. It also expects the new machines to last for 15 years. If the bank needs to earn 14 percent return on this investment, what is the net present value of this investment?a. $506,729b. $306,729c. $272,269d. $381,729e. $424,228Can you provide a step-by-step process and the functions for a financial calculator What is the slope of the line that contains these points? x- 31, 36,41,46 y- 10,8,6,4 True or False: Synchronized cardioversion is appropriate for treating an unknown wide complex tachycardi Liisi was so eager to join the other kids in Tallinn's town square, she could not stop moving. At 10, she was just old enough to join in the folk dances as the city celebrated JaanipevJohn's Day, or Midsummer's Eve. The June 23 festival always made her giddy with delight, and as her mother finally released her, she gave her a swift hug and flew out the door.The square was just a few blocks away, and Liisi could hear the cheers of the crowd as she raced down the cobblestone streets. As she rounded the last corner and entered the square, the dancing had already begun. She was so glad she had paid attention when her mom taught her the traditional steps. Making her way to the front of the crowd, Liisi's school friends waved to her. She caught up to them just as the band started playing, and they arranged themselves in a line for the next dance. At that moment, Liisi could not imagine ever living anywhere else.1Select the correct answer.Which detail best reflects the historical and cultural setting of the text?A. the folk dancesB. the last cornerC. the band playingD. the cheers of the crowd Help naming this plzzzzzzzzzzzzz The name of the most famous ancient Mayan ruin on the Yucatn peninsula isa. PueblaC. Chichn Itzb. Teotihuacnd. ChihuahuaPlease select the best answer from the choices provided Help me please someone !!!!? What is possessive of word France and and give me example The table below shows the number of cruise ships in a harbor on various days.(table pic attached)a. Write an expression for the total number of cruise ships in the harbor on Monday and Tuesday.b. Write an expression for the total number of cruise ships in the harbor on all 5 days. When taking a measurement with a pH meter, keep the instrument in the Choose... until it is needed. Rinse the pH meter with Choose... and gently pat dry. Place the meter in the sample solution, and record the measurement when the I need Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! which of the following statements accurately describes the influence of religion on the government of India A. india is officially a hindu state with a large Islamic minority within its population B. although it has a large population of Hindu followers, India is now officially and Islamic State C. india has always been a secular country D. none of the above How can volunteering strengthen your family?