Write the precipitation reaction for silver sulfate in aqueous solution: (Use the lowest possible coefficients. Be sure to specify states such as (aq) or (s). If a box is not needed, leave it blank.)

Answer:

The mole ratio of AgNO3 to Ag2SO4 IS 2:1 .0.657 g Ag2SO4 x 1 mol / 312 g = 0.00211 mol Ag2SO4.

0.00211 mol Ag2SO4 x 2 mol AgNO3 / 1 mol Ag2SO4 = 0.00421 mol AgNO3

0.00421 mol AgNO3 x 1 L / 0.123 mol AgNO3 = 0.0342 L = 34.2 mL of AgNO3 solution.Therefore,34.2ml of 0.123M AgNO3 will be required.

Answer:

C

Explanation:

b/c when copper and zinc metal are addedto solution,then the solution will be consider under redox reaction

[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex] is the redox reaction. Hence, option C is correct.

A chemical reaction taking place between an oxidizing substance and a reducing substance.

The oxidizing substance is used to lose electrons in the reaction, and the reducing substance is used to gain electrons.

On the reduction potential chart, zinc is a stronger oxidizing agent than, Copper (Cu), which is a reducing agent as compared to silver

The redox reaction most likely occurs if silver and copper metal were added to a solution that contained silver and copper ions is ;

[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex]

Learn more about Redox Reaction here ;

brainly.com/question/13293425

#SPJ5

Answer:

Exothermihic chart

Explanation:

The concentration of CO₃²⁻ ions will be higher

To explain, I want you to imagine H₂CO₃ in water.

we know that it will lose 2 of it's protons, and form 2 ions

The ion which is more stable will have a higher concentration because that ion will refuse to react with anything else, so once something turns into that specific ion, it's not going back... unless there's a more stabler ion possible

In this case, the 2 ions formed are: HCO₃⁻ and CO₃⁽²⁻⁾, drawing the structures of both the ions tells us that both of them have resonance, but the CO₃⁽²⁻⁾ ion has more resonance structures and hence is more stable

Taking into account the definition of molarity and the stoichiometry of the reaction, the correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

The balanced reaction is:

H₃PO₄ (aq) + 3 NaOH (aq) → Na₃PO₄ (aq) + 3 H₂O(aq)

Then, by stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Molarity is the number of moles of solute that are dissolved in a given volume.

Molarity is determined by:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

 Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, 0.42 L of 2.39 M phosphoric acid reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]2.39 \frac{moles}{liter}=\frac{number of moles of phosphiric acid}{0.42 liters}[/tex]

Solving:

number of moles of phosphiric acid= 2.39 [tex]\frac{moles}{liter}[/tex]* 0.42 liters

number of moles of phosphiric acid= 1.0038 moles ≅ 1 mole

Approaching 1 mole of the amount of phosphoric acid required, then by stoichiometry of the reaction, 3 moles of NaOH are necessary to react with 1 mole of the acid.

Then by definition of molarity and knowing that 6.9 M NaOH is needed, you can calculate the necessary volume amount of NaOH by:

[tex]6.9 \frac{moles}{liter} =\frac{3 moles}{volume}[/tex]

Solving:

6.9 [tex]\frac{moles}{liter}[/tex]* volume= 3 moles

[tex]volume=\frac{3 moles}{6.9\frac{moles}{liter} }[/tex]

volume= 0.44 L

The correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

Learn more about molarity with this example: https://brainly.com/question/15406534?referrer=searchResults

Answer:

C

Explanation:

if we were to followw the IUPAC

Answer:

b. radicals form easily in the presence of chlorine radicals.

Explanation:

Chlorine radicals perform the first propagation step: because "radicals form easily in the presence of chlorine radicals."

This is because the first propagation step consumes a CHLORINE RADICAL while the second propagation step regenerates a CHLORINE RADICAL. In this way, a chain reaction occurs, whereby one CHLORINE RADICAL can ultimately cause thousands of molecules of methane to be converted into chloromethane with C12 present.

Hence, in this case, the correct answer is that "radicals form easily in the presence of chlorine radicals."

Answer:

46.2%

Explanation:

Number of moles benzoic acid reacts = 3.3g/122.12 g/mol = 0.027 moles

Since the reaction is 1:1, 0.027 moles of methyl benzoate is formed.

Hence;

Theoretical yield of methyl benzoate = 0.027 moles × 136.15 g/mol = 3.68 g

% yield = actual yield/theoretical yield × 100

% yield = 1.7 g/3.68 g × 100

% yield = 46.2%

Explanation:

The standard entropy change of a reaction has a positive value. This reaction results in an increase in entropy.

Positive entropy means the system has increased its degree of disorderness.

Answer:

[tex]\boxed {\boxed {\sf 0.14 \ mol \ CaCl_2}}[/tex]

Explanation:

We are asked to calculate the number of moles of 15 grams of calcium chloride (CaCl₂).

To convert from grams to moles, we use the molar mass, or the mass of 1 mole of a substance. Molar masses are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead of atomic mass units.

Look up the individual elements in the compound: calcium and chloride.

Notice the chemical formula has a subscript of 2 after Cl or chlorine. There are 2 moles of chlorine in every 1 mole of calcium chloride. We must multiply chlorine's molar mass by 2 before adding calcium's molar mass.

We will convert using dimensional analysis, so we must create a ratio using the molar mass.

[tex]\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

We are converting 15 grams of calcium chloride to moles, so we must multiply the ratio by this value.

[tex]15 \ g \ CaCl_2 *\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

Flip the ratio so the units of grams of calcium chloride cancel.

[tex]15 \ g \ CaCl_2 *\frac { 1 \ mol \ CaCl_2}{110.98 \ g \ CaCl_2}[/tex]

[tex]15 *\frac { 1 \ mol \ CaCl_2}{110.98}[/tex]

[tex]\frac { 15}{110.98} \ mol \ CaCl_2[/tex]

[tex]0.1351594882\ mol \ CaCl_2[/tex]

The original measurement of grams (15) has 2 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the thousandth place tells us to round the 3 up to a 4.

[tex]0.14 \ mol \ CaCl_2[/tex]

15 grams of calcium chloride is approximately 0.14 moles of calcium chloride.

Answer:

A

Explanation:

I'm assuming this question implies that the surface area is in relation to the volume of the pieces. In that case, the SMALLER the size of each piece, the larger the surface area. This is because more particles are able to fit into the container if they are smaller, leading to more surface area. Since more pieces can fit into the container, MORE collisions happen according to collision theory. I cannot add a link, but for a helpful analogy, look up "How To Speed Up Chemical Reactions (and get a date) - Aaron Sams.

Answer: A. smaller, more

Explanation: Founders Educere answer

Answer:

main asteroid belt separates the inner planets from the outer planets

Complete Question

A sample of aluminum, which has a specific heat capacity of 0.897 JB loc ! is put into a calorimeter (see sketch at right) that contains 200.0 g of water. The aluminum sample starts off at 85.6 °C and the temperature of the water starts off at 16.0 °C. When the temperature of the water stops changing it's 20.1 °C. The pressure remains constant at 1 atm. Calculate the mass of the aluminum sample.

Answer:

[tex]M=58g[/tex]

Explanation:

From the question we are told that:

Heat Capacity [tex]H=0.897[/tex]

Mass of water [tex]M=200g[/tex]

Initial Temperature of Aluminium [tex]T_a=85.6[/tex]

Initial Temperature of Water [tex]T_{w1}=16.0[/tex]

Final Temperature of Water  [tex]T_{w2}=16.0[/tex]

Generally

Heat loss=Heat Gain

Therefore

[tex]M*0.897*(85.6-20.1) =200*4.184*(20.1-16)[/tex]

[tex]M=58g[/tex]

Answer:

ethyl - 3- heptanol mouthing

Answer:

ag and au are sure not to react. but hg and sn might or might not

Answer:

When you heat ice, its temperature rises, but as soon as the ice starts to melt, the temperature stays constant until all the ice has melted. This happens because all the heat energy goes into breaking the bonds of the ice's crystal lattice structure.

Explanation:

The temperature stop rising while ice melts into water because, the energy is being absorbed to separate the particles. This is because of latent heat of fusion.

The amount of energy needed to convert the solid substance into a liquid substance by modifying its physical effects. It exists also named enthalpy of fusion. When heat exists supplied to ice, it begins melting and heat is used to increase temperature initially. But after the occasional temperature of ice does not vary and the extra heat exists utilized to melt the ice by cracking bonds between crystal lattice of ice.

The temperature stops increasing while the ice melts into the water because the energy exists being absorbed to divide the particles. This exists because of the latent heat of fusion.

Therefore, (D) option is the correct answer.

To learn more about latent heat of fusion,refer here :

https://brainly.com/question/87248

#SPJ2

A leaking tap that drops water at the rate of 3 drops every second, will leak 259.2 L in a day.

We know that a leaking tap drops water at the rate of 3 drops every second and that each drop is approximately 1 ml. The milliliters of water dropped every second are:

[tex]\frac{3drop}{1s} \times \frac{1mL}{1drop} = \frac{3mL}{1s}[/tex]

We want to know the number of seconds in 1 day. We will use the following conversion factors:

[tex]1day \times \frac{24h}{1day} \times \frac{60min}{1h} \times \frac{60s}{1min} = 86400 s[/tex]

3 mL of water are dropped every second. The mL of water dropped in 86400 s are:

[tex]86400 s \times \frac{3mL}{1s} = 259200 mL[/tex]

Finally, we will convert mL to L using the conversion factor 1 L = 1000 mL.

[tex]259200 mL \times \frac{1L}{1000 mL} = 259.2 L[/tex]

Approximately 259.2 L of water will be dropped in 1 day.

You can learn more about unit conversions here: https://brainly.com/question/19420601

Answer:B) 1s 2s 2p 3s 3p 4s 3d

Explanation:

The ground state electron configuration shows how the electrons in the atomic orbitals of an atom are in their lowest , most stable energy arrangements and since Electrons must be filled following the Aufbau's principle(electrons fill lowest energy shells first)

Now, Titanium lies in period IV and  group 4 of the periodic table with 22 as its atomic number

Thus, the ground-state electron configuration of a neutral atom of titanium is 1s²2s²2p⁶3s²3p⁶4s²3d².  

According to Arrhenius definition of acids, [tex]NH4^+[/tex] is an acid.

According  to Arrhenius  definition of acids and bases, acid is any substance that produces hydrogen ion in solution as its only positive ion.

Following this definition, let us now consider what happens when [tex]NH4^+[/tex] is introduced into a water;

[tex]NH4^+[/tex](aq)-------> NH3(aq) + [tex]H^+[/tex](aq)

Hence, according to Arrhenius definition of acids, [tex]NH4^+[/tex] is an acid.

For another example of Arrhenius acids, see

https://brainly.com/question/516295

Answer:

7.38*10^21

Explanation:

2Na+2H20=2NaOH+H2

nNa=0.0123

number of water moles: 0.012*6*10^23=7.38*10^21

The question is incomplete, the complete question is;

When determining the amount of an oxidant present by titration, you can use iodine and starch as an indicator.

First, the oxidant, like hypochlorite, oxidizes

Choose...

neutral iodine into iodide ion

iodide ion into neutral iodine

iodate polyatomic ion into iodide ion

When starch and iodine are both present, the solution is

Choose...

blue-black

brownish yellow

clear

During the titration, the titrant, like thiosulfate, reduces the

Choose...

iodide ion into iodate polyatomic ion

neutral iodine into iodide ion

iodide ion into neutral iodine

When the iodine has completely reacted at the endpoint of the titration, the solution should become

Choose...

clear

blue-black

brownish yellow

Answer:

1. iodide ion into neutral iodine

2. blue-black

3. neutral iodine into iodide ion

4. clear

Explanation:

Hypochlorite oxidizes the iodide ion to iodine molecule according to the reaction equation;

ClO-(aq) + 2H+(aq) + 2I-(aq) ---------> 6 I2(l) + Cl- (aq)+ H2O(l)

When iodine is added, the colour of the starch solution immediately changes to blue-black.

A reduction reaction occurs when the titrant, thiosulfate is added as follows;

I2 + 2S2O32- → 2I- + S4O62-

The solution at end point is found to become clear again.

N₂ + 3H₂ ⇄ 2NH₃ + heat

In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat

but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached

where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially

Answer:

Explanation:

heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction

decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment

so equilibrium will shift towards the products

Explanation:

here's the answer to your question

Answer:

0.8017

Explanation:

Find the molar Mass of KF

K = 39

F = 19

Total = 58

Note: these numbers are approximate. Use your periodic table to get the exact numbers.

mols = given mass / molar mass

given mass = 46.5

molar mass = 58

mols = 46.5 / 58

mols = 0.8017

Answer:

AgNO3 + NaOH = AgOH + NaNO3.

Explanation:

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.However, the equation balanced here is the initial reaction which produces AgOH and NaNO3.

Answer:

c

Explanation:

it takes 10,000 years to just reduce down the decay

Answer:

This question is asking to find the new temperature

The answer for the final temperature is 429.73K

Explanation:

Using Charles law equation as follows:

V1/T1 = V2/T2

Where;

V1 = initial volume (L)

V2 = final volume (L)

T1 = initial temperature (K)

T2 = final temperature (K)

According to this question;

V1 = 3.0L

V2 = 4.4L

T1 = 20°C = 20 +273 = 293K

T2 = ?

Using V1/T1 = V2/T2

3/293 = 4.4/T2

Cross multiply

293 × 4.4 = 3 × T2

1289.2 = 3T2

T2 = 1289.2 ÷ 3

T2 = 429.73K