y=2x+1
2x-y=3
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

The weight becomes 1/4 of its original value when the distance is multiplied by 2.

According to the question, "the weight of a body above the surface of the earth is inversely proportional to the square of its distance from the center of the earth." We need to determine the effect on the weight when the distance is multiplied by 2.

Let w be the weight of a body, d be the distance from the center of the earth, and k be the constant of variation. According to the question,

w = k / d²

When the distance is multiplied by 2, the new distance is 2d. Therefore, the new weight is given by:

w' = k / (2d)²

w' = k / 4d²

w' = w / 4

Therefore, the weight becomes 1/4 of its original value when the distance is multiplied by 2.

To learn more about weight refer :

https://brainly.com/question/30825684

#SPJ11

Tο shift the graph tο the right, we can simply add a pοsitive cοnstant tο the x values οf each pοint befοre plοtting them. Fοr example, if we want tο shift the graph tο the right by 2 units.

The intersectiοn οf twο number lines creates a twο-dimensiοnal plane knοwn as a cοοrdinate plane. The x-axis, a hοrizοntal number line, and the y-axis, a vertical number line, are twο examples οf these number lines.

Tο graph the equatiοn 5x - 3y = 18 οn a cοοrdinate plane, we can fοllοw these steps:

1. Sοlve fοr y in terms οf x:

5x - 3y = 18

-3y = -5x + 18

y = (5/3)x - 6

2. Chοοse sοme values fοr x and use the equatiοn tο find the cοrrespοnding y values. Fοr example, we can chοοse x = 0, 3, and 6:

When x = 0: y = (5/3)(0) - 6 = -6

When x = 3: y = (5/3)(3) - 6 = -3

When x = 6: y = (5/3)(6) - 6 = 2

3. Plοt the pοints (0, -6), (3, -3), and (6, 2) οn the cοοrdinate plane.

4. Draw a straight line passing thrοugh these three pοints. This line represents the graph οf the equatiοn 5x - 3y = 18.

To know more about coordinate plan visit,

https://brainly.com/question/27481419

#SPJ1

Answer:

Step-by-step explanation:

xs nxqxm,nswjnej,cebxhjme2ckjwadbcweckslnvc

First, we need to find the value of g(pi/2):

g(pi/2) = cos(pi/2) = 0

Now we can substitute this value into f(x):

f(g(pi/2)) = f(0) = sin(0) = 0

Therefore, f(g(pi/2)) = 0.

Parachutist's rate during free fall is 40 meters per second and will fall approximately 490 meters during 10 seconds of free fall.

First, we need to convert 132 feet per second to meters per second. We know that 1 meter is equal to 3.3 feet, so we can use the following conversion factor:

[tex]$\frac{3meter}{3.3 feet}[/tex]

To convert feet per second to meters per second, we can multiply by the conversion factor:

[tex]132 (\frac{1}{3.3} ) = 40 meters/second[/tex]

Therefore, the parachutist's rate during free fall is 40 meters per second.

Next, we can use the following formula to find the distance the parachutist falls during 10 seconds of free fall:

distance =[tex]\frac{1}{2}[/tex] * acceleration * time²

where acceleration due to gravity is approximately 9.8 meters/second^2.

Substituting the given values, we get:

distance = [tex]\frac{1}{2}[/tex] * 9.8 meters/second² * (10 seconds)²

distance = 490 meters

Therefore, the parachutist will fall approximately 490 meters during 10 seconds of free fall.

To know more about Foot visit:

brainly.com/question/14230645

#SPJ1

Answer:

i think 16 im not sure

Step-by-step explanation:

A hexagon with two lines

hope helped you please make me brainalist and keep smiling dude

I hope you are form India

Using trigonometric functions, the value of the side AC = 2.85 units.

The right triangle's angle serves as the domain input value for the six fundamental trigonometric operations, and the output is a range of numbers.

The angle, given in degrees or radians, is the domain of the trigonometric function, sometimes referred to as the "trig function," of  f(x) = sin, and the range is [-1, 1]. The other functions have a similar domain and scope. Trigonometric functions are widely used in algebra, geometry, and calculus.

Now in the given figure,

The angle is a right-angled triangle.

Now as per the trigonometric functions,

Sin 35° = AC/AB

⇒ 0.57 = x/5

⇒ x = 0.57 × 5

= 2.85.

The length of the opposite side AC is 2.85 units.

To know more about trigonometric functions, visit:

https://brainly.com/question/14746686

#SPJ1

Answer:

b = [tex]\frac{S-2la}{h+l}[/tex]

Step-by-step explanation:

S = bh + lb + 2la ( reversing the equation )

bh + lb + 2la = S ( subtract 2la from both sides )

bh + lb = S - 2la ← factor out b from each term on the left side

b(h + l) = S - 2la ← divide both sides by (h + l)

b = [tex]\frac{S-2la}{h+l}[/tex]

He bought 4.29 Kilos of fruit.

4+0.29=4.29

Luke bought 4.29 kilograms of fruit in all

Step-by-step explanation:

Simple addition will be used to find the total fruit Luke bought.

Given

Amount of apples he bought  = 4 kilograms

Amount of oranges he bought = 0.29 kilograms

so the total fruit will be:

[tex]\text{total fruit}=\text{Apples}+\text{oranges}[/tex]

[tex]=4+0.29[/tex]

[tex]=4.29[/tex]

So,

Luke bought 4.29 kilograms of fruit in all

Keywords: Measurement, addition

Learn more about addition at:

#LearnwithBrainly

The slope between the points (-3, 0) and (0, -1) is -1/3.

The slope of a line serves as a gauge for its steepness. It may be calculated by dividing the difference in y-coordinate by the difference in x-coordinate between any two points on a line. A line's slope might be zero, positive, negative, or undefinable. A line with a positive slope is moving upward from left to right, a negative slope is moving downward from left to right, and a line with a zero slope is level. The line is vertical if the slope is undefinable.

Let us consider the first two points (-3, 0) and (0, -1).

The slope of the line is given as:

m = (y2 - y1) / (x2 - x1)

Substituting the values we have:

m = (-1 - 0) / (0 - (-3)) = -1/3

Hence, the slope between the points (-3, 0) and (0, -1) is -1/3.

Learn more about slope of line here:

https://brainly.com/question/11559942

#SPJ1

In conclusion, we can prove that[tex](A -B) U (A C)[/tex] is a superset of[tex]A - (B nC)[/tex] using both the choose-an-element method and the algebra of sets.

To answer this question, let's first draw two Venn diagrams to represent the sets A, B, and C. In the first Venn diagram, shade the region that represents[tex]A - (B nC)[/tex].

This is the region outside of the intersection of B and C and inside of A. In the second Venn diagram, shade the region that represents [tex](A -B) U (A C).[/tex] This is the union of the region outside of B and the region outside of C, both of which are inside of A. Based on these diagrams, we can make the conjecture that (A -B) U (A C) is a superset of A - (B nC).

To prove this conjecture, we can use the choose-an-element method. Let a be an element of A - (B nC). This means that a is in A, but not in B or C. Since a is in A, it is also in (A -B) U (A C), and therefore (A -B) U (A C) is a superset of A - (B n C).

We can also use the algebra of sets to prove this conjecture.[tex]A - (B n C) = (A -B) U (A -C) since A - (B n C)[/tex]is the union of the regions outside of B and outside of C, both of which are inside of A. This implies that (A -B) U (A C) is a superset of A - (B nC).

for such more questions on Venn diagram

https://brainly.com/question/30599101

#SPJ11

The zeroes of the function are -12 and 5.

Zeros of a function are the values of the input variables that make the output of the function equal to zero. The zeros are the solutions of equation f(x) = 0.

According to the question:

To find the zeros of the function

f(x) = x² + 7x - 60, we must set f(x) equal to zero and solve for x.

So we start with the equation:

x² + 7x - 60 = 0

Next, we need to factor the left side of the equation. We are looking for two numbers that multiply to -60 and add to 7. After some trial and error, we find that the numbers are 12 and -5:

x² + 7x - 60 = (x + 12)(x - 5) = 0

Now we can apply the zero product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. Therefore, we set each factor equal to zero and solve for x:

x + 12 = 0 or x - 5 = 0

Solving for x, we get:

x = -12 or x = 5

The zeros of the function f(x) = x² + 7x - 60 are therefore x = -12 and x = 5.

To know more about Zeros of the function visit:

brainly.com/question/16633170

#SPJ1

The probability that more heads are tossed using coin A than coin B is 5/16.

The given data is: Coin A is tossed three times and coin B is tossed two times. We have to find the probability that more heads are tossed using coin A than coin B.

P(E) = Number of favorable outcomes/ Total number of possible outcomes

Coin toss:

There are two possible outcomes in a coin toss, Head or Tail. The probability of getting a head in a coin toss is

1/2 = 0.5.

Therefore, the probability of getting a tail in a coin toss is also 1/2 = 0.5.

Let's calculate the possible outcomes when coin A is tossed three times.

There are 2 possible outcomes when one coin is tossed.

Number of possible outcomes when three coins are tossed = 2 * 2 * 2 = 8

Likewise, the possible outcomes when coin B is tossed two times are:

The number of possible outcomes = 2 * 2 = 4

Therefore, the total number of possible outcomes = 8 * 4 = 32

Now, we will find out the cases where the number of heads is more when coin A is tossed three times.

HHH HHT HTH HTT THH THT TTH TTT HHT HTT THT TTT TTH TTT HTT TTT THT TTT TTT TTT

Therefore, the number of times when more heads are obtained when coin A is tossed three times is 10. (We have to exclude the case when there is an equal number of heads.)

Therefore, the required probability is: P = Number of favorable outcomes/ Total number of possible outcomes

P = 10/32P = 5/16

Therefore, the probability that more heads are tossed using coin A than coin B is 5/16.

To know more about probability for coin tossing: https://brainly.com/question/16988487

#SPJ11

Since both terms are perfect squares, factor using the difference of squares formula, [tex]a^2-b^2=(a+b)(a-b)[/tex] where [tex]a=b[/tex] and [tex]b=3[/tex]

The circle graphs which correctly represents the data in the table is "a circle graph with four sections, labeled vegetarian 30 percent, turkey 20 percent, ham 35 percent, and chicken 15 percent"

The correct answer choice is option B.

Type of Sandwich Number of Customers

Vegetarian 30

Turkey 20

Ham 35

Chicken 15

Total number of customers = 30 + 20 + 35 + 15

= 100

Percentage of each sandwich:

Vegetarian = 30/100 × 100

= 30%

Turkey = 20/100 × 100

= 20%

Ham = 35/100 × 100

= 35%

Chicken = 15/100 × 100

= 15%

Therefore, a circle graph with four sections, labeled vegetarian 30 percent, turkey 20 percent, ham 35 percent, and chicken 15 percent represents the table.

Read more on pie chart:

https://brainly.com/question/26851221

#SPJ1

Answer: y is equal to 8

Step-by-step explanation:

by substituting the x for its vale of three we can add the two values to get 8 or y=8

 The 32 ways to get a five-card combination containing two jacks and three aces.

(a) A full house consists of three of one kind and two of another kind. Therefore, there are 13 different choices for the rank of the triplet and 4 cards of the same rank. Once the triplet has been chosen, there are 12 choices for the rank of the pair and 4 cards of the same rank. Therefore, the number of ways to get a full house is as follows:$${13}{\times}{4}{\times}{12}{\times}{4}={7488}$$Therefore, there are 7488 ways to get a full house.(b) In this case, the two jacks and three aces must be chosen out of the 4 jacks and 4 aces in the deck. Therefore, the number of ways to get a five-card combination with two jacks and three aces is as follows:$$\frac{{4\choose2}{4\choose3}{44\choose0}}{5!}={32}$$Therefore, there are 32 ways to get a five-card combination containing two jacks and three aces.

Learn more about Combination

brainly.com/question/27014146

#SPJ11

a. The mean of X is 1.7549 and the standard deviation is 0.3536.

b. To calculate the proportion of washing machines that will last for more than 15 years, we need to use the standard normal distribution table. The z-score for 15 years is (15-14)/0.3536 = 2.822. Using the table, we find that the proportion of washing machines that will last for more than 15 years is 0.9968.

c. To calculate the proportion of washing machines that will last for less than 10 years, we need to use the standard normal distribution table. The z-score for 10 years is (10-14)/0.3536 = -2.822. Using the table, we find that the proportion of washing machines that will last for less than 10 years is 0.0032.

d. To calculate the 90th percentile of the life of the washing machines, we need to use the standard normal distribution table. The z-score for the 90th percentile is 1.28. Using the table, we find that the 90th percentile is 17 years.

To learn more about normal distribution refer :

https://brainly.com/question/29509087

#SPJ11

Answer:

6 5/6 cups

Step-by-step explanation:

Add.

4 2/3 = 4 4/6

4 4/6 + 2 1/6 gives 6 5/6 cups were used in all.

Hope this helps!

The factοred fοrm οf a pοlynοmial is

1. 30b³- 54b² = 6b²(5b−9)

2. 3y⁵ - 48y³ = 3y³(y  −4)(y + 4)

3. x³ + 8 = (x + 2) (x² – 2x + 2²)

4. y³ - 64 = (y - 4) (y² – 4y + 4²)

5.  8c³ + 343(2c + 7)(4c² − 14c + 49)

The factοred fοrm οf a pοlynοmial is represented as a³ + b³ = (a + b) (a² – ab + b²). All equatiοns are cοmpοsed οf pοlynοmials. Earlier we've οnly shοwn yοu hοw tο sοlve equatiοns cοntaining pοlynοmials οf the first degree, but it is οf cοurse pοssible tο sοlve equatiοns οf a higher degree.

One way tο sοlve a pοlynοmial equatiοn is tο use the zerο-prοduct prοperty. If yοu remember frοm earlier chapters the prοperty οf zerο tells us that the prοduct οf any real number and zerο is zerο.

We will use the formula

a³ + b³ = (a + b) (a² – ab + b²)

And

a³ - b³ = (a - b) (a² – ab + b²)

1. [tex]30b^3-\ 54b^2[/tex]

⇒ 6b²(5b−9)

2. 3y⁵ - 48y³

⇒ 3y³(  y² - 16y)

⇒ 3y³(  y² - 4 + 4 - 16y)

⇒ 3y³(y  −4)(y + 4)

3. x³ + 8

⇒ x³ + 2³

Using a³ + b³ = (a + b) (a² – ab + b²)

⇒ x³ + 2³

⇒ (x + 2) (x² – 2x + 2²)

4. y³ - 64

⇒ y³ -  4³

Using a³ - b³ = (a - b) (a² – ab + b²)

⇒ y³ -  4³

⇒ (y - 4) (y² – 4y + 4²)

5. 8c³ + 343

Using a³ + b³ = (a + b) (a² – ab + b²)

2c + 7

(2c + 7)(4c² − 14c + 49)

To know more about factored form visit:-

brainly.com/question/29065045

#SPJ1

The system of inequalities of the company with the better offer is 75 + 20x ≤ y and 15 + 65x ≤ y

Let's use A to represent the total cost (in dollars) of purchasing a pool membership from the Aquatics Club,

Let S represent the total cost of purchasing a pool membership from the Swimming Hole.

Then we can write the following system of inequalities:

A = 75 + 20x (total cost of Aquatics Club membership)

S = 15 + 65x (total cost of Swimming Hole membership)

Alfonso has no more than y dollars to spend

So, we have

75 + 20x ≤ y

15 + 65x ≤ y

Hence, the system is 75 + 20x ≤ y and 15 + 65x ≤ y

Read more about system of inequalities at

https://brainly.com/question/23093488

#SPJ1

Answer:

the test does not provide convincing evidence that the proportion is greater than 90%

Question 7. C (rectangular pyramid)

Question 8. 17 cm

Answer:

Question 7:C rectangular pyramid

Question 8: C 120 in

A=2(wl+hl+hw)=2·(10·2+5·2+5·10)=160

Step-by-step explanation:

Answer: 1500000

Step-by-step explanation:

use a calculator

Answer:

1,500,000

Step-by-step explanation:

Breaking it up into an easier problem:

20x50 = 1,000

30x50=1,500

1,000 x 1,500, aka "adding three zeros" to the end of 1,500, as 1,000 is simply 1 x 10 x 10 x 10, and each 10 has one 0 to it.

Thus, the answer is 1,500,000

The given square with a side length of one unit is known to contain five points. One must prove that at least two of these points are within square root 2/2 units of each other.

According to the Pigeonhole principle, "if n items are put into m containers, with n > m, then at least one container must contain more than one item."In this context, the square is the container, and the points inside it are the objects. If more than four points are picked, the theorem is true, and two points are nearer to each other than the square root of 2/2 units.

Let's place four points on the square's four corners. The distance between any two of these points is the square root of two units since the square's side length is 1.

Let's add another point to the mix. That point is either inside the square or outside it. Without loss of generality, let us assume that the point is inside the square. It must then be within the perimeter outlined by joining the square's corners to the point that was not a corner already.

The perimeter of the square described above is a square with a side length of square root 2 units.

Since we have five points in the square, at least two of them must be in the same smaller square, due to the pigeonhole principle. Without loss of generality, let's assume that two of the points are in the upper-left square. As a result, any points within this square are within the square root 2 units of any of the other four points. Hence, at least two points of the five selected are within the square root of 2/2 units of each other.

To know more about the "pigeonhole principle": https://brainly.com/question/13982786

#SPJ11

The magnitude and direction of the net force are found by adding the two forces together as resultant force vectors.

a) 11.82 N

b) 74.07°

To find the net force, we add the two force vectors F_1 and F_2:

Fnet = F_1 + F_2

Fnet = (1.31 + 4.6j) N + (3.2i + 6.8j) N

Fnet = 3.2i + (1.31 + 4.6j + 6.8j) N

Fnet = 3.2i + (1.31 + 11.4j) N

To find the magnitude of the net force, we use the Pythagorean theorem:

|Fnet| = sqrt[(3.2)^2 + (1.31 + 11.4)^2] N

|Fnet| ≈ 11.6 N

To find the direction of the net force, we use the inverse tangent function:

θ = tan^(-1)(y/x)

θ = tan^(-1)(11.4/3.2)

θ ≈ 73.8 degrees

Since the net force is in the first quadrant, the direction counterclockwise from the +x-axis is simply θ:

Direction = 73.8 degrees counterclockwise from the +x-axis

Therefore, the net force is Fnet = 3.2i + (1.31 + 11.4j) N, with a magnitude of approximately 11.6 N and a direction of approximately 73.8 degrees counterclockwise from the +x-axis.

To know more about the magnitude and direction of the "net force": https://brainly.com/question/10409611

#SPJ11

Answer:1st one

Step-by-step explanation:

So, the right response is that, in order to more accurately fit the scatterplot that depicts a curve in the data, you need add a quadratic component while performing regression.

As ax² +bx + c, a quadratic equation can be expressed. In a quadratic equation, the largest exponent is 2, which limits the number of terms to a maximum of 3. These terms are exponent 2 (ax²) and exponent 1 (bx) fixed term.

Regression can be improved by including a quadratic component to better match scatterplots of data that display curves. This is so that the independent and dependent variables can have a nonlinear connection, which is made possible by a quadratic term. A quadratic component can assist capture inherent curvature of a data and enhance the fit of a regression model in cases where the connection between both the variables isn't really strictly linear.

A quadratic term may not be appropriate or required, though. A quadratic factor would not increase the model's fit if the variables' relationships are strictly linear and might even result in overfitting. In addition, if the scatterplot contains too many anomalies or the data is not consistent, adding a quadratic factor might not be beneficial.

In order to properly fit a scatter plot graph that depicts a curve in the data, the correct response is you would like to add a quadratic term while performing regression.

To know more about quadratic visit:

brainly.com/question/22364785

#SPJ1

To estimate the distance traveled  we need to find the area under the velocity-time graph from 0 to 8 seconds So,The estimate for the distance the car traveled for the first 8 seconds is 4000 meters.

A velocity-time graph is a graphical representation that shows the velocity of an object on the y-axis and time on the x-axis. It is used to depict the change in velocity over time and can provide information about the acceleration or deceleration of an object.

The height of each strip can be estimated by taking the average of the velocities at the beginning and end of the strip.

Using the trapezium rule, the estimated area of each strip is:

Strip 1: 0.5 x (0 + 2) x (0 + (-500)) = -500 m/s

Strip 2: 0.5 x (2 + 4) x (-500 + (-1000)) = -1500 m/s

Strip 3: 0.5 x (4 + 6) x (-1000 + (-500)) = -1500 m/s

Strip 4: 0.5 x (6 + 8) x (-500 + 0) = -500 m/s

The total estimated area is the sum of the areas of the 4 strips:

Total estimated area = -500 + (-1500) + (-1500) + (-500) = -4000 m/s

Since the area represents the distance traveled by the car, we can take the absolute value of the area to get the estimated distance traveled:

Estimated distance traveled is = |-4000| = 4000 meters

To know more about areas visit:

https://brainly.com/question/18066837

#SPJ1