Answer:
Low power
Explanation:
Low power would allow for the full image of the red blood cells and would appear as small circles.
How many moles of magnesium (Mg) are there in 96.3 g of Mg?
Explanation:
number of moles = m/Mr and the process is in the picture
Which two formulas are used to calculate potential and kinetic energy?
Answer:
[tex]\boxed{\bold { \large { \boxed {KE=\frac{1}{2} mv^2 \ , \ PE=mgh}}}}[/tex]
Explanation:
Kinetic energy formula
[tex]\displaystyle KE=\frac{1}{2} mv^2[/tex]
Potential energy formula
[tex]\displaystyle PE=mgh[/tex]
[tex]\displaystyle KE \Rightarrow \sf kinetic \ energy \ (J)[/tex]
[tex]\displaystyle PE \Rightarrow \sf potential \ energy \ (J)[/tex]
[tex]\displaystyle m \Rightarrow \sf mass \ (kg)[/tex]
[tex]\displaystyle v \Rightarrow \sf velocity \ (m/s)[/tex]
[tex]\displaystyle g \Rightarrow \sf acceleration \ of \ gravity\ (m/s^2)[/tex]
[tex]\displaystyle h \Rightarrow \sf height \ (m)[/tex]
Is salt water considered a mixture or a solution?
Answer: Salt water is a solution because it has these two characteristics: it has the same concentration of each of its parts throughout the solution, and it can be separated by some physical process.
Explanation: Literally learning about this in my science class XD
1) How many moles of water does 6.02 x 1023 molecules
represent?
Answer:
1.00 mol
Explanation:
Step 1: Given data
Molecules of water: 6.02 × 10²³ molecules
Step 2: Calculate the number of moles corresponding to 6.02 × 10²³ molecules of water
In order to convert molecules to moles, we need a conversion factor. In this case, we will use Avogadro's number: there are 6.02 × 10²³ molecules in 1 mole of molecules.
6.02 × 10²³ molecules × 1 mol/6.02 × 10²³ molecules = 1.00 mol (we keep 3 significant figures)
How many moles are in 5.34 x 10*21 particles of Nitrogen?
Hot, molten rock deep below Earth’s surface is called lava mantle rock parent rock magma
Answer:
I think it is Magma
What is the molecular polarity of calcium hydroxide
Answer:Calcium hydroxide is a polar compound. 2. Carbonates are insoluble in water unless it is combined with NH4+ or any group 1A ion. It is a colorless crystal or white powder and is produced when quicklime (calcium oxide) is mixed, or slaked with water.Ca(OH)2 is an ionic compound, in which Ca is the cation and OH is the anion. Ca (calcium) has a charge of 2+, since it is in group 2 on the periodic table.
Explanation: hope this helps and have a great night
Choose the correct statement.
A) Anions gain electrons having a charge of positive.
B) Cations lose electrons having a charge of positive
C)Cations lose electrons having a charge of negative.
D)Anions gain electrons having a charge of neutral.
Answer:
B) Cations lose electrons having a charge of positive.
Explanation:
Hello there!
In this case, it is widely known that ions are classified as positive cations and negative anions, since the former is produced when a metal loses electrons and the latter when a nonmetal gains electrons; in such a way, the correct choice is:
B) Cations lose electrons having a charge of positive.
Best regards!
Answer:
Either B or A
Explanation:
The other answer said B, and I said either B or A, so anyone who is currently cheating on a chemistry test, try B
What is Magnesium phosphide cation and Anion
Answer:
Magnesium Phosphide has a formula of Mg3P2 . Magnesium is a metal cation with a charge of Mg+2. Phosphorus is a nonmetal anion with a charge of P−3. In order to bond ionically the charges must be equal and opposite
Explanation:
Can someone help me out with the question
Which has a greater volume, 100mL of alcohol or 100mL of water? Prove your answer.
Answer water
Explanation:
please fill this formula
ASAP!! How many moles are in 125 g of H2SO4
Answer:
1.276 moles
Explanation:
molar mass of H2SO4 = 2(1)+(32)+4(16) = 98 g
So, there are (125g)(1 mol/98g) = 1.276 moles
1.276 moles are in 125 g of H[tex]_2[/tex]SO[tex]_4[/tex]. A mole is indeed a unit that enables us to correlate the mass of a material with its components.
What is mole?It is defined as the amount of any material that has the same number of basic units as there are in a precisely measured sample of 12C that weighs 12 g. Latin's word for pile, stack, or assemblage is "mole." The number of entities that make up a mole was discovered via experimentation to be 6.022 X 1023.
A mole is indeed a unit that enables us to correlate the mass of a material with its components. The total of the masses of all the atoms that make up one mole of a molecule, expressed in grams, is what is known also as molecular mass or molar mass. A substance's molar mass may be calculated by multiplying its given mass by its g/mol density.
molar mass of H[tex]_2[/tex]SO[tex]_4[/tex] = 2(1)+(32)+4(16)
= 98 g
mole= (125g)(1 mol/98g)
= 1.276 moles
Therefore, 1.276 moles are in 125 g of H[tex]_2[/tex]SO[tex]_4[/tex].
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ5
How does a limiting reagent affect how much product is formed?
O A. The amount of product will be limited by the molar mass of the
limiting reagent
B. The amount of product will be limited by the sum of the reactant
coefficients.
C. The amount of product will be limited by the number of moles of
the limiting reagent.
D. The amount of product will be limited by leftover amounts of other
reactants.
Answer:
C. The amount of product will be limited by the number of moles of
the limiting reagent.
Explanation:
a p e x :)) i just took the quiz
The amount of product will be limited by the number of moles of
the limiting reagent. Hence, option C is correct.
What is a Limiting reagent?The reactant that gets consumed early in the reaction restricts the quantity of product which will be produced in the chemical reaction. Thus, the reactant that gets consumed early in a chemical reaction is a limiting reagent.
Hence, the amount of product will be limited by the number of moles of the limiting reagent.
Learn more about limiting reagents:
brainly.com/question/14225536
#SPJ5
As the volume of a gas increases, what happens to the pressure of the gas?
Specify the number of possible isomers of bromodimethylbenzene. 6 Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms.fill in the blank 2 Specify the number of possible isomers of aromatic compounds with the formula C7H8O. ___ Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms. fill in the blank 4
Answer:
Explanation:
See attached file .
The number of possible isomers of Bromodimethylbenze are 6. One of the isomers is 2 Bromo - m -xylene. The number of possible isomers of an aromatic compound [tex]\rm C_7H_8O[/tex] are 5. One of these isomers has been o - cresol.
(a). Bromodimethylbenze has also been known as bromoxylene. The compound has been consisted of 1 benzene ring with 2 methyl groups and a bromine atom.
The possible isomers of bromoxylene are:
4 Bromo - o -xylene3 Bromo - o -xylene2 Bromo - m -xylene4 Bromo - m -xylene5 Bromo - m -xylene2 Bromo - p -xylene(b). Aromatic compound with formula [tex]\rm C_7H_8O[/tex] has been the benzene compound. The compound has been consisted of a benzene ring with 1 methyl group and oxygen atom.
The possible isomers of [tex]\rm C_7H_8O[/tex] are:
Benzyl alcoholAnisolo - cresolp - cresolm - cresolThus, the number of possible isomers of Bromodimethylbenze are 6. One of the isomers is 2 Bromo - m -xylene. The number of possible isomers of an aromatic compound [tex]\rm C_7H_8O[/tex] are 5. One of these isomers has been o - cresol.
For more information about isomers, refer to the link:
https://brainly.com/question/12796779
pls help
Plot the point (5,9)
30. The density of an unknown gas at 27°C and 2 atm pressure is equal with density of N2 gas at
52°C and at 5 atm
pressure. Calculate the molar mass of that unknown gas.
pls help guys
Answer:
Molar mass of the unknown gas is 64.6 g/mol
Explanation:
Let's think this excersise with the Ideal Gases Law.
We start from the N₂. At STP conditions we know that 1 mol of anything occupies 22.4L.
We apply: P . V = n . R . T
5 atm . V = 1 mol . 0.082 . 325K
V = (1 mol . 0.082 . 325K) / 5 atm = 5.33 L
It is reasonable to say that, if we have more pressure, we may have less volume.
As this is the volume for 1 mol of N₂, our mass is 28 g. Then, the density of the nitrogen and the unknown gas is 28 g/5.33L = 5.25 g/L
Our unknown gas has, this density at 27°C and 2 atm.
If we star from this, again: 1 mol of any gas occupy 22.4L at STP, we can calculate the volume for 1 mol at those conditions:
P₁ . V₁ / T₁ = P₂ . V₂ / T₂
1 atm . 22,4L / 273K = 2 atm . V₂ / 300K
Remember that the value for T° is Absolute (T°C + 273)
[ (1 atm . 22.4L / 273K) . 300K] / 2 atm = V₂ → 12.3L
This is the volume for 1 mol of the unknown gas at 2 atm and 27°C
We use density to determine the mass: 12.3 L . 5.25 g/L = 64.6 g
That's the molar mass: 64.6 g/mol
What happens to the total number of carbon atoms on Earth? Does the total get larger, does it get smaller, or does it stay the same?
Answer:
It stays the same.
Explanation:
Las capas del lecho marino del Mar Mediterráneo cuentan la historia de los cambios ambientales en el hoy desértico norte de Africa desde hace 160.000 años, haciendo uso de la regla de tres simple y notación científica indicar a cuántas décadas corresponde este periodo de tiempo con procedimiento
Answer:
160.000 años corresponde a 16.000 décadas.
Explanation:
Para resolver correctamente el ejercicio debemos plantear la regla de tres simple de la siguiente manera:
1 década equivale a 10 años; A cuantas decadas equivalen 160.000 años?
1 década→10 años
x ←160.000 años
Debemos multiplicar 160.000 por 1 y luego dividir entre 10 ;
x=([tex]\frac{160.000x1}{10}[/tex])=16.000 décadas; en notación científica sería 16x10^3.
Respuesta: 160.000 años corresponde a 16.000 décadas.
What causes radiation?
Answer:
It can come from unstable atoms that undergo radioactive decay, or it can be produced by machines. Radiation travels from its source in the form of energy waves or energized particles. There are different forms of radiation and they have different properties and effects
En la ecuación: Fe2O3 + CO = Fe + CO2.
El agente reductor es:
a)oxido ferrico
b)dióxido de carbono
c)monóxido de carbono
d)hierro
Answer:
English please
Explanation:
How do most animals produce offspring
Answer:
Some animals produce offspring through asexual reproduction while other animals produce offspring through sexual reproduction. Both methods have advantages and disadvantages. Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent.
Explanation:
helllppp i have a test!!!!
A compound has a molar absorptivity of 40.9 cm ^ - 1 * M ^ - 1 at 293 nm. If a 1.00 cm cuvette is used, and the absorbance found to be 0.111, what is the concentration of the sample ?
Answer:
0.00271 M
Explanation:
To solve this problem we can use the formula:
A = ε * C * lWhere A is the absorbance, ε is the molar absorptivity, C is the molar concentration and l is the optical path length.
We input the data given by the problem:
0.111 = 40.9 cm⁻¹M⁻¹ * C * 1.00 cmAnd solve for C:
C = 0.00271 MThe study of chemicals is called chemistry.
The correct answer is 0.00271 M
To solve this problem the formula is used as follows:-
A = ε * C * l
The data is given as follows:-
A is the absorbance,ε is the molar absorptivity, C is the molar concentration l is the optical path length.
[tex]0.111 = 40.9 * C * 1.00[/tex]
After solving the equation the value of C is as follows:-
[tex]C = 0.00271 M[/tex]
Hence, the correct answer is 0.00271.
For more information, refer to the link:-
https://brainly.com/question/14698383
HELP PLS ILL GIVE BRAINLIEST AND 40 POINTS!!!
According to the information in the table, what comparison can Molly make about the densities of sugar and corn starch?
Density is mass divided by volume (D = M/V)
Select one:
A. Corn starch is more dense than sugar.
B. Sugar is more dense than corn starch.
C. Sugar is more dense than baking soda.
D. Both sugar and corn starch are more dense than salt.
Answer:
A.? I think it is A hope it helps
Explain why the pressure of a gas increases when its volume decreases.
HELP
Answer:
The gas pressure is raised by decreasing the volume of a gas. ... The particles can collide more often with the walls of the container because the volume has decreased. They exert force on them each time they collide with the walls. More collisions mean more force, so it will increase the strain.
hope this helped :)
Do you think genetic engineering is ethical? Explain why or why not.
Answer:
Yes
Explanation:
One of the top goals of genetic engineering is the improvement of health. Imagine a world without the threat of AIDS or cancer. Those working in the genetics field hope that manipulating the genes of humans will one day enable science to prevent people from contracting these potentially deadly diseases.
Which process occurs during transpiration?
A.
During transpiration, water vapor precipitates from plants.
B.
During transpiration, water vapor evaporates from plants.
C.
During transpiration, water vapor condensates from plants.
D.
During transpiration, water vapor collects from plants.
E.
During transpiration, water vapor is absorbed by plants.
Answer:
It should be B
Explanation:
because I just searched it up if I'm wrong I'm wrong
Answer:transpiration just took the test
Explanation:
100%
A bone contains 6.25% of Carbon -14 it began with. How old is the bone ?
Answer:
Is there a multiple choice??
Explanation:
What happens as elevation increases?
Answer:
As altitude increases, the amount of gas molecules in the air decreases the air becomes less dense than air nearer to sea level.
Explanation:
