Answer:
Explanation:
a)
v² = u² + 2 a s
v = 9 m/s
u = 4 m/s
s = 50 m
9² = 4² + 2 x a x 50
a = 0.65 m /s²
Acceleration is 0.65 m /s²
b )
time elapsed before velocity changed from 4 m/s to 9 m/s with acceleration of .65 m /s ²
(v - u ) / t = a
(v - u ) / a = t
(9 - 4 ) / .65 = t
t = 7.7
time when passing the first sign will be 7.7 s earlier .
Reading of time indicator = 45 - 7.7
= 37.3 seconds.
Answer:
(a) 0.45 m/s^2
(b) 33.9 s
Explanation:
initial velocity, u = 4 m/s
final velocity, v = 9 m/s
distance, s = 50 m
(a) Let the acceleration is a.
Use third equation of motion
[tex]v^2 = u^2 + 2 as \\\\9^2 = 4^2 + 2\times a\times 50\\\\a = 0.45 m/s^2[/tex]
(b) Let the time is t.
Use first equation of motion
v = u + at
9 = 4 + 0.45 x t
t = 11.1 s
So, the initial time, t' = 45 - 11.1 = 33.9 s
two resistors with resistance values 4.5 ohms and 2.3 ohms are connected in series or parallel across a potential difference of 30V to a light bulb find the current flowing through the light bulb in both cases
Answer:
Look at work
Explanation:
Series:
I is the same for all resistors so just find the value of Req. In series Req= R1+R2+...+Rn. So here it will be 4.5+2.3=6.8ohms. Ieq=Veq/Req=4.41A. And since current is the same across all resistors the current to the lightbulb is 4.41A.
Parallel:
V is the same for all resistors so start of by finding Req. In parallel, Ieq=I1+I2+...+In. So I1= 30/4.5= 6.67A and I2= 13.04A. Ieq= 6.67+13.04= 19.71A.
The working substance of a certain Carnot engine is 1.50 mol of an ideal monatomic gas. During the isothermal expansion portion of this engine's cycle, the volume of the gas doubles, while during the adiabatic expansion the volume increases by a factor of 5.7. The work output of the engine is 940 J in each cycle. Compute the temperatures of the two reservoirs between which this engine
operates.
Answer:
The hot temperature is 157.5 K
The cold temperature is 48.8 K
Explanation:
Step 1: Data given
The working substance of a certain Carnot engine is 1.50 mol of an ideal monatomic gas.
The volume increases by a factor of 5.7
The work output of the engine is 940 J in each cycle.
During the isothermal expansion portion of this engine's cycle, the volume of the gas doubles. This means V2 = 2*V1 (and V4 = 2*V3)
Step 2:For a carnot engine:
V2/V1 = V4/V3
Work = nR((T1)ln(V2/V1) - (T2)ln(V4/V3))
⇒with Work = the work done in the cycle = 940J
⇒with n = the number of moles = 1.50 moles
⇒with R = the gas constant = 8.314 J/mol*K
⇒with T1 = the hot temperature
⇒With T2⇒ the cold temperature
where R = 8.31 J/mol K Gas Constant
940J = 1.5moles * 8.314 J/mol*K * (T1*ln(2) - T2*ln(2)))
940 = 1.5 * 8.314 ln(2) * (T1-T2)
(T1-T2) = 940 / (1.5*8.314*ln(2))
(T1-T2) = 108.7K
For the reversible adiabatic expansion: T2 = T1*(V1/V2)^(R/Cv). Where V2/V1 = 5.7 (Because during the adiabatic expansion the volume increases by a factor of 5.7)
For a monatomic ideal gas, Cv = 3/2R
When we combine both, we'll have:
T2 = T1*(1/5.7)^(R/3/2R)
T2 = T1*(1/5.7)^(2/3)
T2= T1 * 0.31
Since we know that (T1-T2) = 108.7K
we have:
T1 - 0.31T1= 108.7K
0.69T1 = 108.7K
T1 = 157.5K
T2 = 157.5*0.31 = 48.8K
I need help with this problem can anybody help me please , it’s physics 2 course
Answer:
ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|
Explanation:
The 2 capacitors in the middle are connected in parallel so simply add their capacitance together:
[tex]5.0\:\mu\text{F} + 8.0\:\mu\text{F} = 13.0\:\mu \text{F}[/tex]
Now we have 3 capacitors connected in series so their equivalent capacitance [tex]C_{eq}[/tex] is
[tex]\dfrac{1}{C_{eq}} = \dfrac{1}{10.0\:\mu \text{F}} + \dfrac{1}{13.0\:\mu \text{F}} + \dfrac{1}{9.0\:\ mu \text{F}} [/tex]
or
[tex]C_{eq} = 3.5\:\mu \text{F}[/tex]
When an apple falls towards the earth,the earth moves up to meet the apple. Is this true?If yes, why is the earth's motion not noticeable?
Answer:
because the mass of the apple is very less compared to the mass of earth. Due to less mass the apple cannot produce noticable acceleration in the earth but the earth which has more mass produces noticable acceleration in the apple. thus we can see apple falling on towards the earth but we cannot see earth moving towards the apple.
A 0.033-kg bullet is fired vertically at 222 m/s into a 0.15-kg baseball that is initially at rest. How high does the combined bullet and baseball rise after the collision, assuming the bullet embeds itself in the ball
Answer:
The maximum height risen by the bullet-baseball system after the collision is 81.76 m.
Explanation:
Given;
mass of the bullet, m₁ = 0.033 kg
mass of the baseball, m₂ = 0.15 kg
initial velocity of the bullet, u₁ = 222 m/s
initial velocity of the baseball, u₂ = 0
let the common final velocity of the system after collision = v
Apply the principle of conservation of linear momentum to determine the common final velocity.
m₁u₁ + m₂u₂ = v(m₁ + m₂)
0.033 x 222 + 0.15 x 0 = v(0.033 + 0.15)
7.326 = v(0.183)
v = 7.326 / 0.183
v = 40.03 m/s
Let the height risen by the system after collision = h
Initial velocity of the system after collision = Vi = 40.03 m/s
At maximum height, the final velocity, Vf = 0
acceleration due to gravity for upward motion, g = -9.8 m/s²
[tex]v_f^2 = v_i^2 +2gh\\\\0 = 40.03^2 - (2\times 9.8)h\\\\19.6h = 1602.4\\\\h = \frac{1602.4}{19.6} \\\\h = 81.76 \ m[/tex]
Therefore, the maximum height risen by the bullet-baseball system after the collision is 81.76 m.
A 0.060 kg ball hits the ground with a speed of –32 m/s. The ball is in contact with the ground for 45 milliseconds and the ground exerts a +55 N force on the ball.
What is the magnitude of the velocity after it hits the ground?
Answer:
9.25 m/s
Explanation:
Find the volume of cuboid of side 4cm. Convert it in SI form
Answer:
0.000064 cubic meters.
Explanation:
Given the following data;
Length of side = 4 centimeters
Conversion:
100 centimeters = 1 meters
4 cm = 4/100 = 0.04 meters
To find the volume of cuboid;
Mathematically, the volume of a cuboid is given by the formula;
Volume of cuboid = length * width * height
However, when all the sides are equal the formula is;
Volume of cuboid = L³
Volume of cuboid = 0.04³
Volume of cuboid = 0.000064 cubic meters.
A block slides down a frictionless plane that makes an angle of 24.0° with the horizontal. What is the
acceleration of the block?
Answer:
F = m g sin theta force accelerating block
m a = m g sin theta
a = 9.8 sin 24 = 3.99 m/sec^2
A particle charge of 2.7 µC is at the center of a Gaussian cube 55 cm on edge. What is the net electric flux through the surface?
Answer:
3.05×10⁵ Nm²C⁻¹
Explanation:
According to Gauss' law,
∅' = q/e₀............... Equation 1
Where ∅' = net flux through the surface, q = net charge, e₀ = electric permittivity of the space
From the question,
Given: q = 2.7 μC = 2.7×10⁻⁶ C,
Constant: e₀ = 8.85×10⁻¹² C²/N.m²
Substituting these values into equation 1
∅' = (2.7×10⁻⁶)/(8.85×10⁻¹²)
∅' = 3.05×10⁵ Nm²C⁻¹
What is the maximum distance the train can travel if it accelerates from rest until it reaches its cruising speed and then runs at that speed for 15 minutes
The question is incomplete. The complete question is :
A high-speed bullet train accelerates and decelerates at the rate of 4 ft/s^2. Its maximum cruising speed is 90 mi/h. What is the maximum distance the train can travel if it accelerates from rest until it reaches its cruising speed and then runs at that speed for 15 minutes?
Solution :
Given :
Speed of the bullet train, v = 90 mi/h
= [tex]$90 \times \frac{5280}{3600}$[/tex]
= 132 ft/s
Time = 15 minutes
= 15 x 60
= 900 s
Acceleration from rest,
[tex]$a(t) = 4 \ ft/s^2$[/tex]
[tex]$v(t) = 4t + C$[/tex]
Since, v(0) = 0, then C = 0, so velocity is
v(t) = 4t ft/s
Then find the position function,
[tex]$s(t) = \frac{4}{2}t^2 + C$[/tex]
[tex]$=2t^2+C$[/tex]
It is at position 0 when t = 0, so C = 0, and the final position function for only the time it is accelerating is :
[tex]$s(t) = 2t^2$[/tex]
Time to get maximum cruising speed is :
4t = 132
t = 33 s
Distance travelled (at cruising speed) by speed to get the remaining distance travelled.
[tex]$900 \ s \times 132 \ \frac{ft}{s} = 118800 \ ft$[/tex]
Total distance travelled, converting back to miles,
[tex]$2178 + 118800 = 120978\ ft . \ \frac{mi}{5280 \ ft}$[/tex]
= 22.9125 mi
Therefore, the distance travelled is 22.9125 miles
In the figure, particle A moves along the line y = 31 m with a constant velocity v with arrow of magnitude 2.8 m/s and parallel to the x axis. At the instant particle A passes the y axis, particle B leaves the origin with zero initial speed and constant acceleration a with arrow of magnitude 0.35 m/s2. What angle between a with arrow and the positive direction of the y axis would result in a collision?
Answer:
59.26°
Explanation:
Since a is the acceleration of the particle B, the horizontal component of acceleration is a" = asinθ and the vertical component is a' = acosθ where θ angle between a with arrow and the positive direction of the y axis.
Now, for particle B to collide with particle A, it must move vertically the distance between A and B which is y = 31 m in time, t.
Using y = ut + 1/2a't² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a' = vertical component of particle B's acceleration = acosθ.
So, y = ut + 1/2a't²
y = 0 × t + 1/2(acosθ)t²
y = 0 + 1/2(acosθ)t²
y = 1/2(acosθ)t² (1)
Also, both particles must move the same horizontal distance to collide in time, t.
Let x be the horizontal distance,
x = vt (2)where v = velocity of particle A = 2.8 m/s and t = time for collision
Also, using x = ut + 1/2a"t² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a" = horizontal component of particle B's acceleration = asinθ.
So, x = ut + 1/2a"t²
x = 0 × t + 1/2(ainsθ)t²
x = 0 + 1/2(asinθ)t²
x = 1/2(asinθ)t² (3)
Equating (2) and (3), we have
vt = 1/2(asinθ)t² (4)
From (1) t = √[2y/(acosθ)]
Substituting t into (4), we have
v√[2y/(acosθ)] = 1/2(asinθ)(√[2y/(acosθ)])²
v√[2y/(acosθ)] = 1/2(asinθ)(2y/(acosθ)
v√[2y/(acosθ)] = ytanθ
√[2y/(acosθ)] = ytanθ/v
squaring both sides, we have
(√[2y/(acosθ)])² = (ytanθ/v)²
2y/acosθ = (ytanθ/v)²
2y/acosθ = y²tan²θ/v²
2/acosθ = ytan²θ/v²
1/cosθ = aytan²θ/2v²
Since 1/cosθ = secθ = √(1 + tan²θ) ⇒ sec²θ = 1 + tan²θ ⇒ tan²θ = sec²θ - 1
secθ = ay(sec²θ - 1)/2v²
2v²secθ = aysec²θ - ay
aysec²θ - 2v²secθ - ay = 0
Let secθ = p
ayp² - 2v²p - ay = 0
Substituting the values of a = 0.35 m/s, y = 31 m and v = 2.8 m/s into the equation, we have
ayp² - 2v²p - ay = 0
0.35 × 31p² - 2 × 2.8²p - 0.35 × 31 = 0
10.85p² - 15.68p - 10.85 = 0
dividing through by 10.85, we have
p² - 1.445p - 1 = 0
Using the quadratic formula to find p,
[tex]p = \frac{-(-1.445) +/- \sqrt{(-1.445)^{2} - 4 X 1 X (-1)}}{2 X 1} \\p = \frac{1.445 +/- \sqrt{2.088 + 4}}{2} \\p = \frac{1.445 +/- \sqrt{6.088}}{2} \\p = \frac{1.445 +/- 2.4675}{2} \\p = \frac{1.445 + 2.4675}{2} or p = \frac{1.445 - 2.4675}{2} \\p = \frac{3.9125}{2} or p = \frac{-1.0225}{2} \\p = 1.95625 or -0.51125[/tex]
Since p = secθ
secθ = 1.95625 or secθ = -0.51125
cosθ = 1/1.95625 or cosθ = 1/-0.51125
cosθ = 0.5112 or cosθ = -1.9956
Since -1 ≤ cosθ ≤ 1 we ignore the second value since it is less than -1.
So, cosθ = 0.5112
θ = cos⁻¹(0.5112)
θ = 59.26°
So, the angle between a with arrow and the positive direction of the y axis would result in a collision is 59.26°.
A solid piece of clear transparent material has an index of refraction of 1.61. If you place it into a clear transparent solution and it seems to disappear, approximately what is the index of refraction of the solution
Answer:
1.61
Explanation:
According to Oxford dictionary, refractive index is, ''the ratio of the velocity of light in a vacuum to its velocity in a specified medium.''
If the clear transparent solid disappears when dipped into the liquid, it means that the index of refraction of the solid and liquid are equal.
Hence, when a transparent solid is immersed in a liquid having the same refractive index, there is no refraction at the boundary between the two media. As long as there is no refraction between the two media, the solid can not be seen because the solid and liquid will appear to the eye as one material.
How many loops are in this circuit?
I see six (6) loops.
I attached a drawing to show where I get six loops from.
What has a wind speed of 240 kph or greater?
Answer:
SUPER TYPHOON (STY), a tropical cyclone with maximum wind speed exceeding 220 kph or more than 120 knots.
What is the escape speed on a spherical asteroid whose radius is 517 km and whose gravitational acceleration at the surface is 0.636 m/s2
Answer:
810.94 m/s
Explanation:
Applying,
v = √(2gR)............. Equation 1
Where v = escape velocity of the spherical asteroid, g = acceleration due to gravity, R = radius of the earth
From the question,
Given: g = 0.636 m/s², R = 517 km = 517000 m
Substitute these values into equation 1
v = √(2×0.636×517000)
v = √(657624)
v = 810.94 m/s
Hence, the escape velocity is 810.94 m/s
Two spheres are rolling without slipping on a horizontal floor. They are made of different materials, but each has mass 5.00 kg and radius 0.120 m. For each the translational speed of the center of mass is 4.00 m/s. Sphere A is a uniform solid sphere and sphere B is a thin-walled, hollow sphere. Part B How much work, in joules, must be done on the solid sphere to bring it to rest? Express your answer in joules. VO AE4D ? J WA Request Answer Submit Part C How much work, in joules, must be done on the hollow sphere to bring it to rest? Express your answer in joules. Wa Request
Answer:
Explanation:
Moment of inertia of solid sphere = 2/5 m R²
m is mass and R is radius of sphere.
Putting the values
Moment of inertia of solid sphere I₁
Moment of inertia of hollow sphere I₂
Kinetic energy of solid sphere ( both linear and rotational )
= 1/2 ( m v² + I₁ ω²) [ ω is angular velocity of rotation ]
= 1/2 ( m v² + 2/5 m R² ω²)
= 1/2 ( m v² + 2/5 m v²)
=1/2 x 7 / 5 m v²
= 0.7 x 5 x 4² = 56 J .
This will be equal to work to be done to stop it.
Kinetic energy of hollow sphere ( both linear and rotational )
= 1/2 ( m v² + I₂ ω²) [ ω is angular velocity of rotation ]
= 1/2 ( m v² + 2/3 m R² ω²)
= 1/2 ( m v² + 2/3 m v²)
=1/2 x 5 / 3 m v²
= 0.833 x 5 x 4² = 66.64 J .
This will be equal to work to be done to stop it.
In 1.0 second, a battery charger moves 0.50 C of charge from the negative terminal to the positive terminal of a 1.5 V AA battery.
Part A:
How much work does the charger do? Answer is 0.75 J
Part B:
What is the power output of the charger in watts?
Answer:
W = Q * V work done on charge Q
A. W = .5 C * 1.5 V = .75 Joules
B. P = W / t = .75 J / 1 sec = .75 Watts
helppp!!! what's the answer to this??
when an ideal capacitor is connected across an ac voltage supply of variable frequency, the current flowing
a) is in phase with voltage at all frequencies
b) leads the voltage with a phase independent of frequency
c) leads the voltage with a phase which depends on frequency
d) lags the voltage with a phase independent of frequency
what would be the correct option?
Answer:
(b)
Explanation:
The voltage always lags the current by 90°, regardless of the frequency.
The 1 kg box is sliding along a frictionless surface. It collides with and sticks to the 2 kg box. Afterward, the speed of the two boxes is:__________.
A) 0 m/s
B) 1 m/s
C) 2 m/s
D) 3 m/s
E) Not enough info
Answer:
The correct option is (E).
Explanation:
Given that,
Mass of object 1, m₁ = 1 kg
Mass of object 2, m₂ = 2 kg
They collides after the collision. We need to find the speed of the two boxes after the collision.
The initial speeds of both boxes is not given. So, we can't put the values of their speeds in the momentum conservation equation.
So, the information is not enough.
two point charges two point charges are separated by 25 cm in the figure find The Net electric field these charges produced at point a and point b
The image is missing and so i have attached it.
Answer:
A) E = 8740 N/C
B) E = -6536 N/C
Explanation:
The formula for electric field is;
E = kq/r²
Where;
q is charge
k is a constant with value 8.99 x 10^(9) N•m²/C²
A) Now, to find the net electric field at point A, the formula would now be;
E = (kq1/(r1)²) - (kq2/(r2)²)
Where;
r1 is distance from charge q1 to point A
r2 is distance from charge q2 to point A.
q1 = -6.25 nC = -6.25 × 10^(-9) C
q2 = -12.5 nC = -12 5 × 10^(-9) C
From the attached image, r1 = 25 cm - 10 cm = 15 cm = 0.15 m
r2 = 10 cm = 0.1 m
Thus;
E = (8.99 x 10^(9)) × ((-6.25 × 10^(-9))/0.15^(2)) - ((-12.5 × 10^(-9))/0.1^(2))
E = 8740 N/C
B) similarly, electric field at point B;
E = (kq1/(r1)²) + (kq2/(r2)²)
Where;
r1 is distance from charge q1 to point B
r2 is distance from charge q2 to point B.
q1 = -6.25 nC = -6.25 × 10^(-9) C
q2 = -12.5 nC = -12 5 × 10^(-9) C
From the attached image, r1 = 10 cm = 0.1 m
r2 = 25cm + 10 cm = 35 cm = 0.35 m
Thus;
E = (8.99 x 10^(9)) × ((-6.25 × 10^(-9))/0.1^(2)) + ((-12.5 × 10^(-9))/0.35^(2))
E = -6536 N/C
What is the strength of the magnetic field a distance 4.4 mm above the center of a circular loop of radius 0.8 mm and current 474.1 A
Answer:
B = 0.118 T
Explanation:
From Biot-Savart Law:
[tex]B = \frac{\mu_o I}{2\pi r}[/tex]
where,
B = strength of magnetic field = ?
μ₀ = 4π x 10⁻⁷ Tm/A
I = current enclosed = 474.1 A
r = radius = 0.8 mm = 8 x 10⁻⁴ m
Therefore,
[tex]B = \frac{(4\pi\ x\ 10^{-7}\ Tm/A)(474.1\ A)}{2\pi(8\ x\ 10^{-4}\ m)}[/tex]
B = 0.118 T
Turning a corner at a typical large intersection in a city means driving your car through a circular arc with a radius of about 25 m. if the maximum advisable acceleration of your vehicle through a turn on wet pavement is 0.40 times the free-fall acceleration, what is the maximum speed at which you should drive through this turn?
Answer:
9.89 m/s.
Explanation:
Given that,
The radius of the circular arc, r = 25 m
The acceleration of the vehicle is 0.40 times the free-fall acceleration i.e.,a = 0.4(9.8) = 3.92 m/s²
Let v is the maximum speed at which you should drive through this turn. It can be solved as follows :
[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{3.92\times 25} \\\\=9.89 m/s[/tex]
So, the maximum speed of the car should be 9.89 m/s.
The outer surface of a spacecraft in space has an emissivity of 0.44 and a solar absorptivity of 0.3. If solar radiation is incident on the spacecraft at a rate of 950 W/m2, determine the surface temperature of the spacecraft when the radiation emitted equals the solar energy absorbed.
Answer:
[tex]T=326.928K[/tex]
Explanation:
From the question we are told that:
Emissivity [tex]e=0.44[/tex]
Absorptivity [tex]\alpha =0.3[/tex]
Rate of solar Radiation [tex]R=0.3[/tex]
Generally the equation for Surface absorbed energy is mathematically given by
[tex]E=\alpha R[/tex]
[tex]E=0.3*950[/tex]
[tex]E=285W/m^2[/tex]
Generally the equation for Emitted Radiation is mathematically given by
[tex]\mu=e(\sigmaT^4)[/tex]
Where
T=Temperature
[tex]\sigma=5.67*10^8Wm^{-2}K_{-4}[/tex]
Therefore
[tex]\alpha*E=e \sigma T^4[/tex]
[tex]0.3*(950)=0.44(5.67*10^-8)T^4[/tex]
[tex]T=326.928K[/tex]
A rope, under a tension of 221 N and fixed at both ends, oscillates in a second-harmonic standing wave pattern. The displacement of the rope is given by y = (0.10 m)(sin πx/2) sin 12πt, where x = 0 at one end of the rope, x is in meters, and t is in seconds.
What are:
a. the length of the rope.
b. the speed of the waves on the rope
c. the mass of the rope
d. If the rope oscillates in a third-harmonic standing wave pattern, what will be the period of oscillation.
Answer:
sup qwertyasdfghjk
Explanation:
A child is outside his home playing with a metal hoop and stick. He uses the stick to keep the hoop of radius 45.0 cm rotating along the road surface. At one point the hoop coasts downhill and picks up speed. (a) If the hoop starts from rest at the top of the hill and reaches a linear speed of 6.35 m/s in 11.0 s, what is the angular acceleration, in rad/s2, of the hoop? rad/s2 (b) If the radius of the hoop were smaller, how would this affect the angular acceleration of the hoop? i. The angular acceleration would decrease. ii. The angular acceleration would increase. iii. There would be no change to the angular acceleration.
Answer:
a) [tex] \alpha = 1.28 rad/s^{2} [/tex]
b) Option ii. The angular acceleration would increase
Explanation:
a) The angular acceleration is given by:
[tex] \omega_{f} = \omega_{0} + \alpha t [/tex]
Where:
[tex] \omega_{f} [/tex]: is the final angular speed = v/r
v: is the tangential speed = 6.35 m/s
r: is the radius = 45.0 cm = 0.45 m
[tex]\omega_{0}[/tex]: is the initial angular speed = 0 (the hoop starts from rest)
t: is the time = 11.0 s
α: is the angular acceleration
Hence, the angular acceleration is:
[tex] \alpha = \frac{\omega}{t} = \frac{v}{r*t} = \frac{6.35 m/s}{0.45 m*11.0 s} = 1.28 rad/s^{2} [/tex]
b) If the radius were smaller, the angular acceleration would increase since we can see in the equation that the radius is in the denominator ([tex] \alpha = \frac{v}{r*t} [/tex]).
Therefore, the correct option is ii. The angular acceleration would increase.
I hope it helps you!
crushing chalk into powder is and irreversible change. is this example a physical or chemical change?Why?
Answer:
It is a example of physical change
A 100-W light bulb is left on for 20.0 hours. Over this period of time, how much energy did the bulb use?
Answer:
Power = Energy/time
Energy = Power xtime.
Time= 20hrs
Power = 100Watt =0.1Kw
Energy = 0.1 x 20 = 2Kwhr.
This Answer is in Kilowatt-hour ...
If the one given to you is in Joules
You'd have to Change your time to seconds
Then Multiply it by the power of 100Watts.
A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by
The question is incomplete. The complete question is :
A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by x = (4.7 cm)sin[(7.9 rad/s)πt].
Determine the following:
(a) frequency of the motion
(b) period of the motion
(c) amplitude of the motion
(d) first time after t = 0 that the object reaches the position x = 2.6 cm
Solution :
Given equation : x = (4.7 cm)sin[(7.9 rad/s)πt].
Comparing it with the general equation of simple harmonic motion,
x = A sin (ωt + Φ)
A = 4.7 cm
ω = 7.9 π
a). Therefore, frequency, [tex]$f=\frac{\omega}{2 \pi}$[/tex]
[tex]$=\frac{7.9 \pi}{2 \pi}$[/tex]
= 3.95 Hz
b). The period, [tex]$T=\frac{1}{f}$[/tex]
[tex]$T=\frac{1}{3.95}[/tex]
= 0.253 seconds
c). Amplitude is A = 4.7 cm
d). We have,
x = A sin (ωt + Φ)
[tex]$x_t=4.7 \sin (7.9 \pi t)$[/tex]
[tex]$2.6 = 4.7 \sin (7.9 \pi t)$[/tex]
[tex]$\sin (7.9 \pi t) = \frac{26}{47}$[/tex]
[tex]$7.9 \pi t = \sin^{-1}\left(\frac{26}{47}\right)$[/tex]
Hence, t = 0.0236 seconds.
The force an ideal spring exerts on an object is given by , where measures the displacement of the object from its equilibrium position. If , how much work is done by this force as the object moves from to
Answer:
The correct answer is "1.2 J".
Explanation:
Seems that the given question is incomplete. Find the attachment of the complete query.
According to the question,
x₁ = -0.20 mx₂ = 0 mk = 60 N/mNow,
⇒ [tex]W=\int_{x_1}^{x_2}F \ dx[/tex]
⇒ [tex]=\int_{x_1}^{x_2}-kx \ dx[/tex]
⇒ [tex]=-k \int_{-0.20}^{0}x \ dx[/tex]
By putting the values, we get
⇒ [tex]=-(60)[\frac{x^2}{2} ]^0_{-0.20}[/tex]
⇒ [tex]=-60[\frac{0}{2}-\frac{0.04}{2} ][/tex]
⇒ [tex]=1.2 \ J[/tex]
g a horizontal wheel of radius is rotating about a vertical axis. What is the magnitude of the resultant acceleration of a bug that is hanging tightl on the rim of the wheel
Answer:
a = w² r
Explanation:
In this exercise, indicate that the wheel has angular velocity w, the worm experiences the same angular velocity if it does not move, and has an acceleration towards the center of the circle, according to Newton's second law, called the centripetal acceleration.
a = v² / r
angular and linear variables are related
v = w r
we substitute
a = w² r
where r is the radius of the wheel
