Answer:
The program written in Python is as follows (See Explanation Section for detailed explanation)
password = "chEEzburg3rz"
userpassword = input("Enter Password: ")
if userpassword == password:
print("Access granted....")
else:
print("Access Denied")
Explanation:
The programming language was not stated; However, I answered your question using Python
The line initializes the password to chEEzburg3rz"
password = "chEEzburg3rz"
This line prompts user for input
userpassword = input("Enter Password: ")
This if condition checks if user input corresponds with the initialized password
if userpassword == password:
print("Access granted....") If yes, this line is executed
else:
print("Access Denied") If otherwise, this line is executed
You administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. You want the routers on the network to send you notices when they have exceeded specified performance thresholds. Which protocol should you use to enable the routers to send the notices
Complete Question:
You administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. You want the routers on the network to send you notices when they have exceeded specified performance thresholds. Which protocol should you use to enable the routers to send the notices?
Group of answer choices
A. ARP
B. SMTP
C. SNMP
D. Telnet
Answer:
C. SNMP.
Explanation:
In this scenario, you administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. Also, you want the routers on the network to send you notices when they have exceeded specified performance thresholds. Hence, you should use the SNMP to enable the routers to send the notices.
SNMP is an acronym for simple network management protocol, which is a standardized application-layer protocol that is used for monitoring and organizing management information about network devices on either a wide area network (WAN) or local area network (LAN).
Basically, the SNMP helps to provide a common language for network devices such as switches, routers, printers, servers etc to share information with a network management system.
A simple network management protocol (SNMP) is part of the Transmission Control Protocol and Internet Protocol (TCP⁄IP) suite.
The quicksort is an example of a divide and conquer algorithm in that it divides the sorting problem into smaller problems by dividing the list of items to be sorted into smaller subsets. The pivot is the mechanism that is used to segment the list. Describe how the quicksort works including a discussion of the pivot, how it is selected, and why the pivot is important to the quicksort.
Answer:
The quicksort pivot is an arbitrary element within the collection that is being sorted. Using the pivot point, the collection of elements is partitioned into two smaller lists of elements. Using some logic, the smaller elements are placed left of the pivot point, and larger elements are placed to the right of the pivot point. Ideally, you would prefer you pivot point to be a median of your dataset to optimize the creation of the two sublists into a balanced state.
Cheers.
The pivot of a quicksort algorithm ought to always be the element in the middle. Some algorithms will choose the item in the center as the pivot, while others will choose the first or last element.
What is quicksort algorithm?Quicksort is a sorting method that operates in-place. It was created by British computer scientist Tony Hoare and is still a widely used sorting algorithm.
When properly implemented, it can be slightly faster than merge sort and two or three times faster than heapsort.
The quicksort pivot can be any element in the collection being sorted. The collection of elements is divided into two smaller lists of elements using the pivot point.
Smaller elements are placed to the left of the pivot point, while larger elements are placed to the right of the pivot point.
To optimize the creation of the two sub-lists into a balanced state, you would prefer your pivot point to be the median of your dataset.
Thus, this way quicksort works.
For more details regarding quicksort algorithm, visit:
https://brainly.com/question/13257594
#SPJ2
are the network administrator for your company. You are installing a new printer in the network. When you check the print server properties, it displays the following error: Server properties cannot be viewed. The print spooler service is not running. What should you do to resolve the issue using the least administrative effort
Answer:
Will have to run the net start spooler command.
Explanation:
The printer spooler seems to be accountable for overseeing incoming faxes that have been in effect intended for handling by the printer. Whether this device stops operating, your printer won't publish documentation as well as the machine may not notice it either.To solve these problems, you'll need to run the net start spooler command using the least administrative effort.Which of the following means to find and fix errors in code?Which of the following means to find and fix errors in code?
Debug
Document
Error check
Restore
Answer:
Its A
Debug
Explanation:
I took the test
With a C program (memory map), data in _____ is initialized by the kernel to arithmetic 0 or null pointers before the program starts executing. The C declaration (for example, "long sum[1000];") appearing outside any function causes this variable to be stored in _____.
Answer:
The answer is " Uninitialized data segment ".
Explanation:
It (memory map) field whenever a C program is locked to run, the kernels must allocate information into 0 or null pointer in this section until the process runs. This variable, that is outside of any function, has been stored in uninitialized data item by the C statement (like, "long amount[1000];").
If we did not declare the data segment, it also called bss, in which all block which begins with the symbol and is called for an old assembly language operator.
Give two examples of a large databases that might be used to help members of the public
Answer:
Examples of large database that might be used to help members of the public are;
1) Apple Healthkit, Carekit and Researchkit
2) IBM Deep Thunder
Explanation:
1) The use of medical aid wearable devices that give instant data feed into the the a patients electronically stored health record has become possible and include the listed Apple technologies that enable the iPhone get instant access and feed back on individual health records
2) Large databases are used for weather forecasting by the processing of big data with the aid of very powerful computers by IBM Deep Thunder, which can also forecast natural disasters and the likelihood of wreckage in utility lines.
Why were most movies from the late 1890s until the early 1930s only filmed in black and white? The film used to make color motion pictures often overheated, which was a safety hazard, so it was generally not allowed. There were only a few people who could afford the technology to produce color motion pictures back then. Color films had to be hand-colored, frame by frame. Audiences did not want color motion pictures until later.
Answer:
Color films had to be hand-colored, frame by frame.
Explanation:
Colored films were a rarity during the late 18th and early 19th centuries. Most movies were produced in black and white as the production of colored films was a difficult task as the films have to be hand-colored, frame by frame.
However, things began to change with the development of art and technology. While the dye is used to tint the color of certain scenes before, the new development in the films allows the capture of all scenes in color. But this does not mean that all films are shot in color. Most films continued to be shot in black and white even after the development of colored films.
Answer:
b
Explanation:
What is computer Network?
Answer:
[tex]\boxed{\sf {view \: explanation}}[/tex]
Explanation:
A computer network is a network of computers that can share data among the computers.
Which of the following is not a networking equipment?
Answer:
[tex]\boxed{\sf (C) \ mouse}[/tex]
Explanation:
A networking equipment can share data along a computer network. A mouse is not a networking equipment.
Ned is trying to decide how he wants to connect the nodes on the network he created. What are the two options that he has?
Select one:
a through physical nearness or a central server
b. through hard cabling or wireless radio waves
c. through ethernet cables or Bluetooth
d. through software programs or osmosis
Since Ned is trying to decide how he wants to connect the nodes on the network he created, the two options that he has are option b and C:
b. Through hard cabling or wireless radio waves.
c. Through ethernet cables or Bluetooth.
What kind of cable does a computer system typically use to connect to a network?A twisted pair Ethernet cable called an Ethernet crossover is used to directly connect computing devices that would typically be connected through a network switch, Ethernet hub, or router, such as by connecting two personal computers together using their network adapters.
Note that a group of two or more interconnected nodes makes up a node network. Once a connection has been established between two or more nodes, all searches return lists of configured users and resources from both nearby and distant nodes. Every computer in the node network keeps track of this fundamental data.
Therefore, Through a link or communication channel, nodes are connected. A computer network may use cable, fiber, or both of these.
Learn more about ethernet from
https://brainly.com/question/28156384
#SPJ1
what is the location in the base interface of the link to
create a table using wizard?
pls Answer me.
I'll make as BRIANLIST.
Answer:
Hey mate, here is your answer. Hope it helps you.
Explanation:
Before you can create objects such as tables and forms, you must first create the database file in which they will be stored.
1. On the File tab select New.
2. Click on Blank database.
3. In the File Name box, type a name for your database.
4. Click on the browse button to the right of the File name box to browse for a location for your
database.
5. Click on Create.
A new database will be created with a new default Table.
6. Click on Design View to start working with this Table.
You can use forms to control access to data, such as which fields of data are. Then open the table or query upon which you want to base the form. 2. To create a form on which all fields from the underlying table or query are placed. Then to be more selective about which fields appear on your form, you can use the Form Wizard.
&. Give three differences between a
web browser
and web page
Answer:
The three differences between the Web page and Web browser are given below.
Explanation:
A web browser seems to be a search application that enables internet connectivity. A web-page seems to be a single document containing Website content.A web browser, including Google Chrome as well as Firefox, has become a program on oneself machine. A web page, like Google or Twitter, is what you will need the application to accessWeb browsers can view the contents of the site via the application. Webpage should be any web page and sometimes web destination. If something is opened on the internet, it's a website.1) To point the lens of a camera up or down is called:
A) Arc
B)Dolly
C)Pan
D)tilt
Answer:
D)
Explanation:
Tilting is a cinematographic technique in which the camera stays in a fixed position but rotates up/down in a vertical plane.[1] Tilting the camera results in a motion similar to someone raising or lowering their head to look up or down. It is distinguished from panning in which the camera is horizontally pivoted left or right. Pan and tilt can be used simultaneously.[2] In some situations the lens itself may be tilted with respect to the fixed camera body in order to generate greater depth of focus. [3][4]
The camera's tilt will change the position of the horizon, changing the amount of sky or ground that is seen.[5] Tilt downward is usually required for a high-angle shot and bird's-eye view while a tilt upward is for a low-angle shot and worm's-eye view. The vertical offset between subjects can reflect differences in power, with superior being above.
Does anyone know how I can fix this? I don’t know what is wrong. When I click retry it restarts my laptop and returns back to this. Please help!
Answer:
Software Program Reinstallation
Use the following steps to reinstall factory installed software programs:
Click Start (), All Programs, Recovery Manager, and then Recovery Manager again.
Figure : Recovery Manager
Recovery Manager main screen
Under I need help immediately, click Software Program Reinstallation.
On the Software Program Reinstallation welcome screen, click Next.
Look in the Factory installed programs list for the software program you want to reinstall.
If your software program is listed, select the title.
If the program you want to reinstall is not listed, select The program is not in the list, and then click Next. Follow the instructions to reinstall the program.
Figure : Select program to reinstall
Software Program Reinstallation window
Click Next.
If you are not prompted to uninstall the program before reinstalling it, continue to the next step.
If you are prompted to uninstall the program before reinstalling it, follow these steps.
Click Start (), and then Control Panel.
Under Programs, Uninstall a program.
The Uninstall or change a program window opens.
Figure : Uninstall or change a program
Uninstall or change a program screen
Select the program you want to remove.
Click Uninstall or Uninstall/Change at the top of the program list.
Read and respond to any messages that appear while the software is being removed from your computer.
Once the program is uninstalled, resume the reinstallation from the Recovery Manager program.
When the reinstallation is complete, select Yes, and then Finish to restart the computer.
All of the following statements about MapReduce are true EXCEPT: MapReduce handles the complexities of network communication. MapReduce is a general-purpose execution engine. MapReduce handles parallel programming. MapReduce runs without fault tolerance.
Answer:
The correct option is;
MapReduce runs without fault tolerance
Explanation:
Map Reduce is a technique of processing or a framework of software, that is geared towards managing, sorting and handling large data by working in the Map and Reduce phases where the map function involves the dividing, filtering and sorting of the data and mapping of the split data while the reduce method involves the rearranging, summary activities having the data reduced.
As a chemical engineer, what would you be most likely to do in your job?
design robots to perform repetitive tasks
sterilize food processing equipment
design sewer treatment plants
combine microorganisms and enzymes to create new medicines
Answer:
The correct option is;
Design sewer treatment plants
Explanation:
Chemical engineers, also known as a process engineer, are involved in the design and development of cost beneficial ways of utilizing energy and materials which can mostly be established as a chemical manufacturing process
The chemical engineer works by applying scientific principles to resolve and provide amicable solutions to the production usage, disposal, and waste management, of chemical and other related materials
Chemical engineers conducts research into the usage of materials and production process.
You want to complete conversion tracking setup on your business website with Google Ads. You've already implemented a global sitewide tag. Your next step is to create event tags, which must be placed in the correct section of your web pages to properly function. Where's the event tag implemented on a web page?
Answer:
The answer is "Between the website tags immediately after the global site tag".
Explanation:
The event tag is used to log clicks as well as perceptions for adverts, not creative things, or to define the inventive data, It may insert more parameters.
These Tags are code binder clips, that are added to the site and then sent to respondents to obtain and send data. In this users could use tags to monitor scrolls, track suitable formulation, gather feedback, start generating heat maps, display advertising, to your website for all kinds of applications. The API also sends event details to Google Ads, show & Video 360, Campaign Manager, Search Anzeigen 360, and google docs that use the international site tag in the JS tag.Order the steps a user needs to follow to preview and then print a document
Answer:
Click file tab, click print tab, preview document, print document.
Answer:
Click file tab, click print tab, preview document, print document.
Explanation:
Click file tab, click print tab, preview document, print document.
learn to accept your mistakes even when you have done your
Answer:
besttttttttttttttttttttttt
Chris needs to create a simple web page with HTML. Which tool will he use? HyperText Web browser Text editor Operating software WILL GIVE 100 AND BRAINLIEST!!!!!!!!!!!!!!!!!!!!!!!!1
Answer:
The answer is "Text editor".
Explanation:
It is a computer program, which is used to provide editing on the plain text, and for this editing, we use a text editor. This tool differs from word processors software because it doesn't add additional text editing metals. In this tool, we also write the HTML code, and the incorrect choice can be defined as follows:
HyperText is a wrong choice because in these two or more pages are linked and it is used to move from one page to another. The Web browser is also a wrong choice because it is used to display the design of the web page. Operating software is also a wrong choice because it system software in which all things are done.Answer:
text editor
Explanation:
What is the "online disinhibition effect"?
Answer:
Online disinhibition is the lack of restraint one feels when communicating online in comparison to communicating in-person.
ternary operators of computer
please explain.
Answer:
It's a compact way of doing an if-else statement.
General Format is
<condition> ? <if condition is true> : <else>;
Example:
I could rewrite:
if(a==1) temp = 1;
else temp = 999;
as
temp = (a==1) ? 1 : 999;
what are the uses of mobile phones?
Answer:
We use mobile phones to:
1. communicate with our friends and family
2. looking for the information/news in the world
3. looking for the material for study
and many others
may it helps^_^
Answer:
Mobile phones are used for a variety of purposes, such as keeping in touch with family members, for conducting business, and in order to have access to a telephone in the event of an emergency. Some people carry more than one mobile phone for different purposes, such as for business and personal use.
Explanation:
Plz mark me as brainiestYou find a list of websites that relate to your chosen topic and click on the first one. You ask yourself the three questions presented in this lesson to see if this site is reliable: 1) Who wrote it? There isn't an author listed anywhere that you can find. 2) What type of site is it? The site name ends in . 3) How current is the information? You see the site was updated yesterday. Is this website reliable and worth examining further? True or False?
Answer:
False
Explanation:
Information reliability is essential in production. sourcing information from a reliable source is base on several criteria. They are; the author of the resource file, the type of media platform holding the information, the frequent revision of the information, additional support or collaboration to publish public information, etc.
A government website ( with the site-address ending with a '.gov' ) which is concurrently revised by the institute, gives a piece genuine and reliable information, whereas a commercial website with no author and just recently revised or published, would be judged as an unreliable source of information
(C++) Write code to complete RaiseToPower(). Sample output if userBase is 4 and userExponent is 2 is shown below. Note: This example is for practicing recursion; a non-recursive function, or using the built-in function pow(), would be more common.4^2 = 16Given: #nclude using namespace std;int RaiseToPower(int baseVal, int exponentVal){int resultVal = 0;if (exponentVal == 0) {resultVal = 1;}else {resultVal = baseVal * //your solution goes here;}return resultVal;}int main() {int userBase = 0;int userExponent = 0;userBase = 4;userExponent = 2;cout << userBase << "^" << userExponent << " = "<< RaiseToPower(userBase, userExponent) << endl;return 0;}
Answer:
Following are the code to this question:
RaiseToPower(baseVal, exponentVal-1);//calling method RaiseToPower and in second parameter we subtract value
resultVal = baseVal * RaiseToPower(baseVal, exponentVal-1);//defining resultVal variable that calculate baseVal and method value
Explanation:
In the above-given code inside the "RaiseToPower" method is defined that accepts two parameters, which are "baseVal and exponentVal" and inside the method, an integer variable "resultVal" is defined, that holds a value that is 0.
In the next step, if the conditional statement is used, in if the block it checks the "exponentVal" variable value that is equal to 0, if it is true it assigns value 1 in "resultVal" otherwise it will go to else block in this block, the "resultVal" variable holds "baseVal" variable value and call the "RaiseToPower" method, and multiply the baseVal and method and store its value in resultVal and return the value. Inside the main method, two integer variable userBase, userExponent is defined that holds a value and calls the above method and prints its return value.please find the attachment of the code file and its output.
How would you define a cloud today?
as a non-factor
networking
server
any remote virtualized computing infrastructure
Answer:
The answer is "any remote virtualized computing infrastructure".
Explanation:
The term cloud is used as the symbol of the internet because cloud computing is some kind of internet computing, that offers various services for computers and phones in organizations via the internet.
The virtual network allows users to share numerous system resources throughout the network system.It allows you to access the optimal productivity by sharing the resources of a single physical computer on many virtual servers.You have an application that for legal reasons must be hosted in the United States when U.S. citizens access it. The application must be hosted in the European Union when citizens of the EU access it. For all other citizens of the world, the application must be hosted in Sydney. Which routing policy should you choose in order to achieve this
Question options:
A. Latency-based routing
B. Simple routing
C. Geolocation routing
D. Failover routing
Answer:
C. Geolocation routing
Explanation:
Geolocation routing is used in allocating resources for different traffic sources originating from different geographical locations. Consequently you are allocating a different resource to handle a different DNS query based on the location/origination of the DNS query. In the above example, you will need to for example to route all queries from any other place in the world that is not US or Europe to a load balancer for Sydney. Your application in their different locations using geolocation routing would have to be adapted and localized to the region so as to serve the audience there
Which decimal value (base 10) is equal to the binary number 1012?
Answer:
The decimal value of 101₂² base 2 = 25 base 10
Explanation:
The number 101₂² in decimal value is found as follows;
101₂ × 101₂ = 101₂ + 0₂ + 10100₂
We note that in 101 + 10100 the resultant 2 in the hundred position will have to be converted to a zero while carrying over 1 to the thousand position to give;
101₂ + 0₂ + 10100₂ = 11001₂
Therefore;
101₂² = 11001₂
We now convert the result of the square of the base 2 number, 101², which is 11001₂ to base 10 as follows;
Therefore converting 11001₂ to base 10 gives;
11001₂= 1 × 2⁴ + 1 × 2³ + 0 × 2² + 0 × 2 ¹ + 1 × 2⁰
Which gives;
16 + 8 + 0 + 0 + 1 = 25₁₀.
The decimal value in base 10 that is equal to the binary number 101_2 is; 5
We want to convert 101_2 from binary to decimal.
To do this we will follow the procedure as follows;
(1 × 2²) + (0 × 2¹) + (1 × 2^(0))
>> (1 × 4) + (0 × 2) + (1 × 1)
>> 4 + 0 + 1
>> 5
In conclusion, the decimal value we got for the binary number 101_2 is 5
Read more about binary to decimal conversion at; https://brainly.com/question/17546250
1. Here is a program segment to find the quantity base . Both base and exp are entered at the keyboard. System.out.println("Enter base and exponent: "); double base = IO.readDouble();// read user input double exp = IO.readDouble(); // read user input /* code to find power, which equals baseexp */ System.out.print(base + " raised to the power " + exp); System.out.println(" equals " + power); Which code is a correct replacement for /* code to find power, which equals baseexp */ ?
Answer:
The correct code to this question can be de4fined as follows:
double power;
power = Math.pow(base, exp);
Explanation:
In the given question the choices were missing, that's why we defined the correct code only.
In the given code a two double variable "base and exp" is declared, that input the value from the user-side, and store its value into there respective variables. In the next step, "power", that is a double variable is declared, which uses the "Math.pow" function that calculates given values power and prints its value.please find the attachment of the full code.
i wiil mark brainlist
