Answer:
A and B
Explanation:
Graphite (like in a pencil) is a material that can easily be smudged and shaded just by smudging it a little. Therefore I believe it's A or B
Answer:
Its C
Explanation:
How many moles of gas fill a 2.2 L vessel with a pressure of 1.2 atm at 25.0 °C?
P=
V=
n=
R=
T=
Formula:
Answer:
Do you still need this answer? If you do i can provide it for you still
Thank you
EMERGENCY OR I WILL FAIL PLS HELP I WILL MARK BRAINLIEST!!!!
Answer:
1. sublimation
2.melting
3.melting
4.sublimation
Explanation:
melting is a process when solid changes to liquid
Sublimation is the transition of a substance directly from the solid to the gas state, without passing through the liquid state.
An insoluble solid has a mass of 80.0 g . It is placed in a graduated cylinder containing 40.0 mL which then rises to 80.0 mL. What is the density of the solid?
a
(A) 0.300 g/mL
b
(B) 0.50 g/mL
c
(C) 2.00 g/mL
d
(D) 3.33 g/mL
Answer:
The correct answer is (B) 0.50 g/mL
Explanation:
The density of a subtance is equal to the ratio between its mass and its volume, as follows:
d = m/v
In the problem, the mass is equal to 80.0 g. The volume is given by the increment in volume in the graduated cylinder when the solid is placed because the solid is insoluble so it displaces the liquid and increases the volume. The initial volume was 40.0 ml and the final volume was 80.0 ml, so:
V = Final volume - initial volume = 80.0 ml - 40.0 ml = 40.0 ml
Finally, we calculate the density by dividing the mass into the volume:
[tex]d= \frac{m}{v} = \frac{80.0 g }{40.0 ml} = 0.50 g/ml[/tex]
What is the freezing point of a 2.00 m solution with phenol as
the solvent?
Answer: 26.1 C
Explanation: Trust me
Answer:26.1
Explanation:
I did the ck12
When a radioactive atom emits an alpha particle, the mass number of the radioactive atom
A. Increases because the alpha particle contains 2 electrons
B. Decreases because the alpha particle contains 2 electrons
C. Increases because the alpha particle contains 2 protons
D. Decreases because the alpha particle contains 2 protons
Answer:
d or c
Explanation:
Answer:
c
Explanation:
did it
Help me!
what is the biggest disadvantage of using nuclear power to produce electricity?
a. nuclear fission releases more air pollution than burning coal
b. nuclear fission produces less energy than burning coal or oil.
c. nuclear waste must be safely stored for many years
d. nuclear waste must be incinerated
The biggest disadvantage of using nuclear power to produce electricity is the nuclear waste must be safely stored for many years.
What is nuclear power?Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from:
Nuclear fission Nuclear decay and Nuclear fusion reactionsNuclear reactions produces high amount of energy and many waste materials which are non degradable and will stay in the environment for the long time.
Hence, nuclear waste must be safely stored for many years.
To know more about nuclear power, visit the below link:
https://brainly.com/question/11963586
#SPJ2
Why is soap mixed with water?
O A. The soap turns the water molecules into a nonpolar solvent.
B. It covalently bonds to the water so it can be washed away.
O C. Its polar end mixes with the water so it can be washed away.
D. The soap becomes chemically active when mixed with water.
Answer:
Explanation:
Soap breaks up the oil into smaller drops, which can mix with the water. It works because soap is made up of molecules with two very different ends. One end of soap molecules love water - they are hydrophilic. The other end of soap molecues hate water - they are hydrophobic.
Answer:
C. Its polar end mixes with the water so it can be washed away.
Explanation:
Just took test
A calcium atom differs from a calcium ion in that the atom has a greater
A)
number of electrons
B)
number of protons
C)
atomic number
D)
mass number
Answer:
A) number of electrons
Explanation:
A calcium atom has 20 electrons while a calcium ion has 18 electrons since it loses 2 electrons to form a stable octet structure. The formula of a calcium ion is Ca2+.
The number of protons does not change, neither do the number of neutrons. Atomic number is the proton number which is equals to the number of protons, hence B and C is wrong. Mass number is the number of protons and neutrons. Hence it doesnt change too and D is wrong.
Only the number of electrons change when an atom forms an ion.
5.UT
---Urut points)
Which of the following explains the process of radiation?
5.1
when heat gets transferred through electromagnetic waves that move through
space
5.1
when heat gets transferred through objects that are touching
5.1
when heat gets transferred through a liquid or a gas
O when the measurement of heat in the atmosphere goes down
Answer:
when heat gets transferred through electromagnetic waves that move through
space
Explanation:
Radiation refers to the movement of energy through space without a material medium of propagation.
Electromagnetic waves have the ability to travel through space without a material medium for propagation. For instance, the rays from the sun reach us on earth without any intervening medium. Heat from a furnace can affect an object some distance away from the furnace without an intervening medium.
These are all examples of radiation. Energy is propagated through space without the intervention of any material medium.
What is the answer ?
Answer: c
Explanation: an xray wave does have a higher frequency than an infrared wave.
Answer:
Explanation:c
Fiona is examining a material. She notices that the material has a dull appearance and feels very brittle.
Fiona is most likely examining a _______
(I'll give brainliest)
"Typical nonmetals have a dull, coloured or colourless appearance; are brittle when solid; are poor conductors of heat and electricity; and have acidic oxides." - Wikipedia
Which sentence best describes part of the process for generating electricity in a nuclear power plant?
A.Atoms Join together to produce water molecules.
B.An atom releases electrons, producing an electric current.
C.Protons and neutrons Join together to create atoms.
D.Heat is released when atomic nuclel split.
Answer:it is D
Explanation: it is only one that makes sense
which of the following is the most accurate description of all known spaces
Answer:
where are the following??
like anything? any animal?
Explanation:
Answer:
vevaeeav
Explanation:cx fsbtenet
NEED HELP ASAP!!!!!!!!!!!!!!!
Where will you encounter the least amount of life in the oceans?
abyssal plains (the ocean's bottom)
the beach
the top 200 meters of the ocean
inter tidal zone
Answer:
The abyssal plains
Explanation:
this is because it is so dark and devoid of resources that it is hard for most forms of life to survive
pls make me brainliest :) I'm trying to become an Ace
Answer:
abyssal
Explanation:
Explain why a small magnet will stick to a refrigerator door, but a nail will not stick.
Answer:
Magnets stick to the fridge door because, underneath the paint, the door is made of steel. Magnets are attracted to certain metals, and if the attraction is strong enough they can hold on even when upside down. ... This means that a magnet will always be attracted to the door. But an iron nail does not have any magnetic properties. So it doesnt get attracted.
Hope this helps, Pls mark as Brainliest!!
A small magnet will stick to a refrigerator door, but a nail will not stick
because magnets attract certain types of metals.
Magnets have a strong magnetic field which is why it attracts metals such
as iron and steel. The refrigerator must have been made with iron or steel
which was why the magnet stuck to it.
Metals such as aluminium and copper aren't attracted by magnets which is
why the nails weren't attracted as a result of it being made with metals which magnets don't attract.
Read more on https://brainly.com/question/19482396
Icp need help of available
Answer:
True statements: B and C
Explanation:
A is not true NaCl is product
D is not true the reaction occurs
After a copper smelter begins operation, local downwind populations of plants begin to adapt to the resulting air pollution. Scientists document, for example, that the acid tolerance of several plant species has increased significantly in the polluted area. This is an example of...
artificial selection
over production
selective breeding
natural selection
Answer:
natural selection (directional selection).
Explanation:
Natural selection: In biology, the term "natural selection" is described as one of the central concepts associated with evolution. Through the process of natural selection, different organisms having favorable traits are most likely to reproduce. However, these organisms then pass the given traits to their next or coming generation. The process of natural selection allows different organisms to adapt to their specific environment.
Directional selection is considered as one of the different modes of natural selection.
In the question above, the given statement represents a natural selection.
sonar measures underwater distances by using?
Answer:
By using the speed of sound in water
Explanation:
(Which is about 1500 m/s in sea depending on the sea water density )
HELPPP ASAPPPP PLEASEEEEEEEEEEEEEEEEEE
Determine the mass of hydrogen in a 2.5 sample of ammonia
show work using dimensional analysis
Answer:
[tex]\large \boxed{\text{0.44 g}}[/tex]
Explanation:
1. Calculate the molar mass of ammonia
1 N = 1 × 14.01 g = 14.01 g
3 H = 3 × 1.008 g = 3.024
TOTAL = 17.03 g
2. Calculate the mass of hydrogen
So, there are 3.024 g of H in17.03 g of NH₃.
The conversion factor is either
[tex]\dfrac{\text{3.024 g H}}{\text{17.03 g NH}_{3}} \text{ or } \dfrac{\text{17.03 g NH}_{3}}{\text{3.024 g H}}[/tex]
We want to find grams of H, so we choose the one with grams of H on top.
[tex]\text{Mass of H} = \text{2.5 g NH}_{3} \times \dfrac{\text{3.024 g H}}{\text{17.03 g NH}_{3}} = \textbf{0.44 g H}\\\\\text{The mass of H is $\large \boxed{\textbf{0.44 g}}$}[/tex]
An object becomes positively charged when it
a loses electrons.
b loses protons.
c gains electrons.
d gains neutrons.
Show ur working:
What mass of sulfur trioxide is formed from 96g of sulfur dioxide?
2 SO2+O2 –> 2 SO3
Answer:
120 g SO3
Explanation:
128 g SO2 -> 160 g SO3
96 g SO2 -> x
x= (96 g SO2 * 160 g SO3)/128 g SO2
x= 120 g SO3
The mass of sulfur trioxide, SO₃, formed is 120 g
The balanced equation for the reaction is given below:
2SO₂ + O₂ —> 2SO₃Next, we shall determine the mass of SO₂ that reacted and the mass of SO₃ produced from the balanced equation. This can be obtained as follow:
Molar mass of SO₂ = 32 + (16×2)
= 32 + 32
= 64 g /mol
Mass of SO₂ from the balanced equation = 2 × 64 = 128 g
Molar mass of SO₃ = 32 + (16×3)
= 32 + 48
= 80 g /mol
Mass of SO₃ from the balanced equation = 2 × 80 = 160 g
Thus,
From the balanced equation above,
128 g of SO₂ reacted to produce 160 g of SO₃.
Finally, we shall determine the mass of SO₃ by the reaction of 96 g of SO₂. This can be obtained as follow:
From the balanced equation above,
128 g of SO₂ reacted to produce 160 g of SO₃.
Therefore, 96 g of SO₂ will react to produce = [tex]\frac{96 X 160}{128}\\\\[/tex] = 120 g of SO₃.
Therefore, the mass of SO₃ formed is 120 g
Learn more: https://brainly.com/question/18474161
What is the molariity of a 50.0 mL aqueous solution containing 10.0 grams of table salt, NaCl?
Answer:
3 mol/L
Explanation:
You should know or have the equation to solve for Molarity which is;
M = n/v (M: Molarity) (n: moles of solute) (v: Liters of solute)
You can start off differently but I would start by converting the mL to L. This is your "v" value.
50.0 mL/ 1000 mL = 0.05 L
Now, you have to convert grams to moles in order to solve for molarity (M).
1.) On the periodic table find the molecular weights of Na and Cl.
Na= 22.99 g/mol Cl= 35.45g/mol
2.) Add them together to have their combined molecular weights.
22.99 + 35.45= 58.44 g/mol
3.) Now, you're going to use the "picket fence method" or whichever your teacher taught you to convert from grams to moles. This will be your "n" value. (I cannot show it on here without it looking weird, so my sincere apologies.)
10.0 g/ 58.44 g = 0.17111 mol
4.)You are now going to plug in your answers into the equation for Molarity.
M= 0.17111 mol / 0.05 L = 3.4222
5.) I am sure your professor might be a stickler so for sig figs sake when you multiply or divide use the smallest amount of sig figs you see which is 1. Round 3.4222 to 3 mol/L
Sorry this explanation is long let me know if you need a better more written out sample.
Help with as many as possible is appreciated! :)
Calculate the molarity of the solutions described below.
a. 10.0 g of sodium chloride is dissolved in 2.0 L of solution.
b. 52.5 g of sugar (C12H22O11) s dissolved in 1.0 L of solution.
c. 120 g of aluminum sulfate is dissolved in 10.0 L of solution.
d. 1.75 g of caffeine (C8H10N4O2) is dissolved in 0.100 L of solution.
Answer:
a. 0.0855 M
b. 0.153 M
c. 0.0351 M
d. 0.0901 M
Explanation:
a.
Molar mass NaCL= 23.0 +35.5 = 58.5 g/mol
10.0 g* 1 mol/58.5 g = 10.0/58.5 mol
(10.0/58.5) mol/2L = 0.0855 mol/L = 0.0855 M
b.
Molar mass (C12H22O11) =342.3 g/mol
52.5 g*1mol/342.3 g = 52.5/342.3 mol=0.153 mol
0.153 mol/1L = 0.153 M
c.
Molar mass (Al2(SO4)3) =342.2 g/mol
120g* 1 mol/342.2 g =0.351 mol
0.351 mol/10.0L = 0.0351 mol/L = 0.0351 M
d.
Molar mass (C8H10N4O2) = 194.2 g/mol
1.75 g*1mol/194.2 g = 0.00901 mol
0.00901 mol/0.100 L =0.0901 M
What mass of calcium chloride is needed to prepare 2.657 L of a 1.56 M solution?
Answer:
459.126 grams of calcium chloride is needed to prepare 2.657 L of a 1.56 M solution
Explanation:
Molarity is a measure of the concentration of a solute in a solution that indicates the amount of moles of solute that appear dissolved in one liter of the mixture. In other words, molarity is the number of moles of solute that are dissolved in a given volume.
The Molarity of a solution is determined by the following expression:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex]
In this case:
Molarity: 1.56 M= 1.56 [tex]\frac{moles}{liter}[/tex]Number of moles of calcium chlorine= ?Volume= 2.657 litersReplacing:
[tex]1.56 M=\frac{Number of moles of calcium chlorine}{2.657 liters}[/tex]
Solving:
Number of moles of calcium chlorine= 1.56 M* 2.657 liters
Number of moles of calcium chlorine= 4.14 moles
In other side, you know:
Ca: 40 g/moleCl: 35.45 g/moleThen the molar mass of the calcium chloride CaCl₂ is:
CaCl₂= 40 g/mole + 2* 35.45 g/mole= 110.9 g/mole
Now it is possible to apply the following rule of three: if in 1 mole there is 110.9 g of CaCl₂, in 4.14 moles of the compound how much mass is there?
[tex]mass=\frac{4.14 moles*110.9g}{1 mole}[/tex]
mass= 459.126 g
459.126 grams of calcium chloride is needed to prepare 2.657 L of a 1.56 M solution
A pelican is born with a larger bill than other pelicans of the same species. When this pelican
breeds, some of its offspring also have larger bills. What is the most likely explanation for the
larger bills in the pelican and its offspring?
Inheritance of an quoted trait
A mutation
Natural selection
A change in diet
Answer:
natural selection
Explanation:
it is a biological selection of genes, whether dominant or negative.
What do you think is meant by the term pseudoscience?
Answer:
The term "pseudo-science" assumes a criterion that allows a differentiation between science and nonscience, good science and bad science, true and false. ... They must try to understand them and not put out in television programmes the sort of pseudo-science that does not exist in reality
Explanation:
Explanation:
it means false science
The only thing that makes one kind of light different from another is it’s ____?
A) frequency
B) color
C) wavelength
D) temperature
aight imma let you guys i
Answer:
b
Explanation:
it is right
An ion with a -2 charge has? A) one missing protein B) two missing protons c) two missing electrons D) two extra electrons
Answer:
D.
Explanation:
It would not be gain because it would say +6 instead of -2. Having a -2 charge means it wants to loose 2 electrons so it can form a full shell of 8 electrons. It wants to be inert (stable).
- Hope that helps! Please let me know if you need further explanation.
All of the following use digitized signals to encode and transmit information EXCEPT:
Select one:
Fiber optic cables
Record players
Wi-Fi devices
Flat screen TVs
Answer:
Record players
Explanation:
In a record player, a stylus vibrates as it follows a spiral groove cut into the surface of the rotating record.
The vibrations (analogue) are converted into electrical signals and fed into an amplifier to produce the sounds you hear
Fiber optic cables, Wi-Fi devices, and flat screen TVs use digitized signals to encode and transmit information
