Answer:
Reset the router by holding down the reset button for 30 seconds. The reset button can be located in the back or bottom area of the router. The function of the reset button is to turn restore the wireless router to default factory setting such that customized settings including the DNS, the static IP address setup, stored personal passwords DHCP parameter settings port forwarding and routing settings are erased.
Explanation:
Assume that strike Counter has already been declared to be a "pointer to int". Assume further that strike Counter has been initialized -- its value is the address of some int variable. Write a statement that adds 22 to the value of the variable that strikeCounter is pointing to.
Answer:
The statement to this question can be defined as follows:
*strike_Counter =*strike_Counter +22;//adds value 22 in *strike_Counter
Explanation:
In the given question, it is already defined, that "strike_Counter" is an integer pointer variable, which means, it only holds the integer value in its address memory.
In the next step, it is defined, that it adds the value "22" in its variable, and for this, we declare the statement in the answer section, which adds the value.
for example, if in the "strike_Counter" variable holds the integer value, that is 5 and after adding the 22 it will become 27.
Why were most movies from the late 1890s until the early 1930s only filmed in black and white? The film used to make color motion pictures often overheated, which was a safety hazard, so it was generally not allowed. There were only a few people who could afford the technology to produce color motion pictures back then. Color films had to be hand-colored, frame by frame. Audiences did not want color motion pictures until later.
Answer:
Color films had to be hand-colored, frame by frame.
Explanation:
Colored films were a rarity during the late 18th and early 19th centuries. Most movies were produced in black and white as the production of colored films was a difficult task as the films have to be hand-colored, frame by frame.
However, things began to change with the development of art and technology. While the dye is used to tint the color of certain scenes before, the new development in the films allows the capture of all scenes in color. But this does not mean that all films are shot in color. Most films continued to be shot in black and white even after the development of colored films.
Answer:
b
Explanation:
Which part of project management involves determining the overall work? Breakdown Incomes Scope Time
Answer:
Incomes
Explanation:
Project management has to do with the process of achieving a set goal with the help of a team within a specified time. Most times, the main problem that comes with project management is completing the project within the available constraints.
No project can start up without funds, which in this case is called income and this is the part of the project that determines the overall work.
Answer:
It's not income I just got it wrong I'm not really sure but I would assume it is breakdown I'm sorry if I'm wrong if I'm right please reward me brain list.
When developing a new software package, logically, the software must be designed before the code is written, and the code must be written before it is tested. These activities are dependent on each other by _________ constraints.
Answer: Technical
Explanation: When making decisions, we may have to follow a certain pattern or order due to restrictions brought about by circumstances rules or conditions. These restrictions or limitations are regarded to as constraints. Technicality may be explained as the knowledge, expertise or initiative required for an operation, production or design. Therfore, we may view technical constraint as limitations or restrictions brought about by the technical guidelines or expertise required for a certain products. From a technical perspective, before a software package can be built, the engineer must know why and what he wants the software to be capable of doing, then he writes the code then tests the code. It is a sequence, a test cannot be performed without a written code and code cannot be written without a planned design.
Your company has assigned you to revise 22 scripts. Since you use the vi editor, how can you set it to automatically display lines as numbered so it is easier for you to work on these revisions
Answer:
To enable VI editor automatically display lines as numbered, the following steps must be taken:
Step 1: Press the Escape key to exit the insert or append mode.
Step 2. Press the colon key to trigger the cursor. The cursor will appear at the lower-left position of the screen next to a : prompt.
The Next step is to type the following command: set no number hit the enter button to execute the command. This will trigger a column of sequential line numbers will appear at the left side of the display. Each line number references the text located directly to the right of it.
Step 3: To enable this to happen automatically, the appropriate set statement as a line in must be inserted a file in your home directory named .exrc
Cheers!
(C++) Write code to complete RaiseToPower(). Sample output if userBase is 4 and userExponent is 2 is shown below. Note: This example is for practicing recursion; a non-recursive function, or using the built-in function pow(), would be more common.4^2 = 16Given: #nclude using namespace std;int RaiseToPower(int baseVal, int exponentVal){int resultVal = 0;if (exponentVal == 0) {resultVal = 1;}else {resultVal = baseVal * //your solution goes here;}return resultVal;}int main() {int userBase = 0;int userExponent = 0;userBase = 4;userExponent = 2;cout << userBase << "^" << userExponent << " = "<< RaiseToPower(userBase, userExponent) << endl;return 0;}
Answer:
Following are the code to this question:
RaiseToPower(baseVal, exponentVal-1);//calling method RaiseToPower and in second parameter we subtract value
resultVal = baseVal * RaiseToPower(baseVal, exponentVal-1);//defining resultVal variable that calculate baseVal and method value
Explanation:
In the above-given code inside the "RaiseToPower" method is defined that accepts two parameters, which are "baseVal and exponentVal" and inside the method, an integer variable "resultVal" is defined, that holds a value that is 0.
In the next step, if the conditional statement is used, in if the block it checks the "exponentVal" variable value that is equal to 0, if it is true it assigns value 1 in "resultVal" otherwise it will go to else block in this block, the "resultVal" variable holds "baseVal" variable value and call the "RaiseToPower" method, and multiply the baseVal and method and store its value in resultVal and return the value. Inside the main method, two integer variable userBase, userExponent is defined that holds a value and calls the above method and prints its return value.please find the attachment of the code file and its output.
Assume that the Measurable interface is defined with a static sum method that computes the sum of the Measurable objects passed in as an array, and that BankAccount implements the Measurableinterface. Also assume that there is a variable branchAccounts that is an object reference to a populated array of BankAccount objects for a bank branch. Which of the following represents a correct invocation of the sum method to find the total balance of all accounts at the branch?
A) Arrays.sum(branchAccounts)
B) Measurable.sum(branchAccounts)
C) BankAccount.sum(branchAccounts)
D) branchAccounts.sum()
Answer:
B) Measurable.sum (branchAccounts)
Explanation:
The user interface which can be built by adding components to a panel. The sum method that will be used to find total balance of all accounts at branch is measurable.sum, this will layout the sum of specified branch account total. The measurable interface implements public class bank account as measurable sum.
Write a Java program to compute the sum of the upper-rounded value of the number 4.2 and the square of 25. Display all the three values to the user on different lines, without any assignment operation in the entire program.
please answer.
Answer:
how do expect someone to write an entire java script code for you
Explanation:
In python,_______ are used to define the conditions necessary for a while loop to run.
Answer:
Relational Operators
Explanation:
We can make a while loop run only when some variable or whatever is relative to something else.
The valid operators are:
<, >, =, <=, >=, and =!
Hope this helped!
Answer:
sorry not sure
Explanation:
PLEASE HELP!!!! I'll mark Brainliest for whoever is first!!!!
What does this snippet of code do? birds = ["robin", "finch", "grackle", "crow", "wren"] for i in birds: print(i)
It counts the number of birds in the list.
It prints the index and then each bird name.
It prints each bird name on a separate line.
It prints each index number on a separate line.
Answer:
It counts the number of birds in the list.
Explanation:
The snippet of code works in counting the number of birds in the list.
What is a code Snippet?A code snippet is a word that is used in computer programming to inform a little chunk of reclaimable source code, machine code, or text. Some text skilled worker, code skilled worker, and IDEs have a property called Code Snippets. The code in this snippet counts the number of birds in the list.
Therefore, option A is correct.
Learn more about the code Snippet, refer to:
https://brainly.com/question/15003149
#SPJ2
When does the memory space allocated to local variables and parameters get deallocated? When the application ends, the memory space allocated to local variables and parameters of both the called function and calling program is deallocated. O When the calling program ends, the memory space allocated to local variables and parameters of the called function is deallocated. When the called function ends, the memory space allocated to local variables and parameters of the calling program is deallocated. When the called function ends, the memory space allocated to local variables and parameters of the called function is deallocated. O
Answer:
last option: When the called function ends, the memory space allocated to local variables and parameters of the called function is deallocated.
Explanation:
A function, when it is called, uses the stack to allocate local variables. When it exits, those variables are no longer needed (since they are local), so the stack pointer is reset to the position it had before calling the function.
how to delete audio from powerpoint
Answer:
To delete an audio clip, select the audio icon on the slide and press Delete.
Hope it helps!!!!
What is computer Network?
Answer:
[tex]\boxed{\sf {view \: explanation}}[/tex]
Explanation:
A computer network is a network of computers that can share data among the computers.
Which area of study involves microeconomWhich area of study involves microeconomics? A. a nation's ability to meet consumer demand B. rates of unemployment and inflation C. consumer behavior and preferences D. national income and its sourcesics?
Answer:
The correct answer is C. Consumer behavior and preferences.
Explanation:
hope it will help :)
Answer: the answer is C consumers behavior and preferences.
Explanation: just took the test please add thanks and brainliest
State what is meant by the terms: Parallel data transmission ......................................................................................................... ................................................................................................................................................... ................................................................................................................................................... Serial data transmission ........................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Answer:
parallel communication is a method where several binary digits are sent as a whole, on a link with several parallel channels.
serial communication conveys only a single bit at a time over a communication channel or computer bus.
Your computer has been operating without problems for some time, but on your most recent startup, nothing appears on the monitor screen. The lights for the keyboard, floppy drive, and hard disk flash at startup. Your computer has an American Megatrends, Inc. (AMI) BIOS program, and the computer generates one long beep followed by eight short beeps at startup. Which item is most likely to be defective
the board if not try a restart a couple more times and we see what happens from there
As an IT technician, you are responsible for maintaining your company's laser printers. Recently, you read that laser printers have a cleaning phase. Another IT technician explains that you do not need to clean a laser printer because of this phase. However, you do not agree. What actually occurs during this phase
Answer:
When the drums revolution is completed, the toner still remaining on the photoreceptor drum is cleaned by a plastic blade that is made of soft electrically neutral material which then deposits waste toner into a toner reservoir in the printer. The drum is then charged to become uniformly negatively charge by a rolling charger to prepare the drum for the beam from the laser.
Explanation:
Question 12 :A user complains that his computer is taking a long time to boot. During the boot process, you observe that the hard drive activity light is staying on. You discover that the hard drive is nearing its maximum capacity. The computer contains a single 150 GB hard drive. What should you do
Answer:
Delete unnecessary apps
Explanation:
If you don't need it and its installed it's just using up memory the system could be using for something else
Having a skilled labor force is one of the ________________ impacts of technology on the workplace.
negative
positive
Answer:
negative
Explanation:
this is because not many people have the skills to operate the machines. In short not everyone is able to operate them
How can artificial intelligence be used in learning science?
Artificial intelligence can be used to help science students research and verify their research. It is also a very interesting topic to study in general.
Hope that helped!!! k
what is the location in the base interface of the link to
create a table using wizard?
pls Answer me.
I'll make as BRIANLIST.
Answer:
Hey mate, here is your answer. Hope it helps you.
Explanation:
Before you can create objects such as tables and forms, you must first create the database file in which they will be stored.
1. On the File tab select New.
2. Click on Blank database.
3. In the File Name box, type a name for your database.
4. Click on the browse button to the right of the File name box to browse for a location for your
database.
5. Click on Create.
A new database will be created with a new default Table.
6. Click on Design View to start working with this Table.
You can use forms to control access to data, such as which fields of data are. Then open the table or query upon which you want to base the form. 2. To create a form on which all fields from the underlying table or query are placed. Then to be more selective about which fields appear on your form, you can use the Form Wizard.
Does anyone know what happened to Cole Morgen, the actor?
I looked on the internet about him and it turned out that he was 24 years old, but it is the only thing that appears about him.
Answer:
Cole Morgen has been on stage acting in theatre and dance since the age of 4.He has been a part of many local theatre productions. His first professional play was "Dead End" starring Jeremy Sisto and directed by Nicholas Martin at the Ahmanson Theatre followed by and a part in the Arthur Miller's play "All My Sons" directed by Randall Arney at the famous Geffen Playhouse.
Cole was cast in his first feature film as Kevin James's son Eric in the current Adam Sandler film "I Now Pronounce You Chuck and Larry" directed by Dennis Dugan.Cole has an unlimited amount of enthusiasm that he brings to everything that he does. Not only is he a very talented and versatile actor and tap dancer, he is a kind and gentle soul. He has always carried a vision of giving back to his community in some way. On his birthday/holidays, instead of receiving gifts, he has managed to figure out a way to make a difference. In the past he has collected food for animal shelters, toys for children, and performed at retirement homes for fun. Cole loves music and plays the piano and guitar. Cole enjoys swimming, soccer, bike riding, sailing, chess,and origami. Cole is never without a book and credits his reading to strengthening his creative side and inspiring him to meet the challenge for future acting roles.Besides acting, Cole loves tap dancing and is always looking to improve his skills. He won the national tap competition last summer taking the title of Mr. Junior Cole has an unlimited amount of enthusiasm that he brings to everything that he does. Not only is he a very talented and versatile actor and tap dancer, he is a kind and gentle soul. He has always carried a vision of giving back to his community in some way. On his birthday/holidays, instead of receiving gifts, he has managed to figure out a way to make a difference. In the past he has collected food for animal shelters, toys for children, and performed at retirement homes for fun. Cole loves music and plays the piano and guitar. Cole enjoys swimming, soccer, bike riding, sailing, chess,and origami. Cole is never without a book and credits his reading to strengthening his creative side and inspiring him to meet the challenge for future acting roles.
Question 55 :You use a computer named Wkst1 on a TCP/IP network, which is installed with an application that uses UDP to send a file from your computer to a computer named Wkst2. Data collisions occur, and several data packets are lost during transmission. What will most likely occur as a result of losing the packets during transmission?
Answer:
The protocol will drop the packets
The application will automatically re-transmit the packets
Explanation:
Based on design, the routers will drop the packets as allowed by the Internet Protocol, due to the collision that resulted from the router being busy and the network is congested or that the packet is corrupt as indicated by the check sequence of the Ethernet frame or the IPv4 header checksum
Given that the application uses User Datagram Protocol (UDP) which does not allow recovery of lost packets, but have their defined methods of overseeing lost packets, as such the application will re-transmit the packet.
Businesses today suceed or fail based on their ability to
Answer:
their ability to Innovate with technology to meet their customers needs
Explanation:
What are responsibilities of entrepreneurs? Check all of the boxes that apply.
to own businesses
to work for companies
to be responsible for employees
to be responsible to stakeholders
What are responsibilities of employees? Check all of the boxes that apply.
to own businesses
to work for companies
to be responsible for employees
to be responsible to stakeholders.
Answer:
The correct options are;
1) To own businesses
To be responsible to employees
2) To work for companies
To be responsible to stakeholders
Explanation:
The entrepreneur is responsible for setting up and managing the establishment as well as provision of motivation for the employees. The entrepreneur gives direction and vision to the business which the employees follow, and as such the entrepreneur is responsible for being laudable and dependable and consistent
The employees are responsible for the work they do for the companies is done in a safety and healthful to them
The employees are responsible for the health and safety of other stakeholders for their actions and in-actions and to cooperate with the safety efforts of the employer
Answer:
to own business, to be responsible for employees, to work for companies.
Explanation:
Which of the following demonstrates an information system? Tyra is using the computer to create a birthday card for her friend. Ahmad is installing new software to improve the ease of accessing the database. Shania is creating a printed handbook of company policies for new employees. Ian is making updates to the company website to include the latest product information
Answer:
B. Ahmad is installing new software to improve the ease of accessing the database.
C. Shania is creating a printed handbook of company policies for new employees.
D. Ian is making updates to the company website to include the latest product information
Explanation:
Information Systems is an organized way of assembling, processing, storing, and sharing information. It is used by organizations to run their businesses. A typical information system will feature the people who run or control the process, the tasks they are meant to perform, the procedures which govern the work done, and the technology used to achieve those goals. Information systems incorporate information technology into the running of the business. The examples cited above, illustrate the application of information systems in business affairs. For example,
1. When Ahmad installs new software to improve the ease of accessing the database, the main components of an information system which includes; people (Ahmad), the task (which entails installation of the software), the procedures (that govern software installation), and the technology (apparently a computer system), all have a role to play.
Which rule should be followed to stay safe online?
O Keep inappropriate messages private.
O Avoid sharing photos with anyone online.
O Keep screen names private.
Ask an adult for permission to download.
Answer:Avoid sharing photos with anyone online.
Explanation:in other to stay safe on the internet avoid sharing of your pic to strangers most especially pic with inappropriate dressing.... You can be manipulated.....
Answer:
B
Explanation:
Give two examples of a large databases that might be used to help members of the public
Answer:
Examples of large database that might be used to help members of the public are;
1) Apple Healthkit, Carekit and Researchkit
2) IBM Deep Thunder
Explanation:
1) The use of medical aid wearable devices that give instant data feed into the the a patients electronically stored health record has become possible and include the listed Apple technologies that enable the iPhone get instant access and feed back on individual health records
2) Large databases are used for weather forecasting by the processing of big data with the aid of very powerful computers by IBM Deep Thunder, which can also forecast natural disasters and the likelihood of wreckage in utility lines.
Mark is the network administrator in his building and is responsible for training all the new technicians on various troubleshooting techniques. He is instructing them on documenting their actions at the end of the troubleshooting process. What should he NOT encourage them to document at that time
Answer:
See answer below
Explanation:
He should not encourage his new technicians to document theories that were followed at the end of the troubleshooting process. This because the theory might not add to their knowledge about troubleshooting. What is paramount and needed to be documented for future references are their findings, actions taken by them and the outcome achieved through the whole troubleshooting process.
In trouble shooting, a technician aims at solving problems on computer system by following a set of steps such as establishing theory of probable cause, testing the theory to determine the cause, establishing a plan of action and implementing the solutions; in order to determine and solve the problem.
The theories here are the steps that were followed in determining and solving the observed issues hence should not be documented except the findings, actions taken and the final outcomes that were achieved.
Question 19 :A user needs the video capability in his computer upgraded to support a new graphics application. The computer includes an onboard video card. You install a new video card in the computer. You need to disable the onboard video card. Where should this card be disabled
Answer:
The onboard video card should be disabled in the BIOS. After you disable the onboard video card in the BIOS, it will no longer function.
Explanation:
Since in the question a user wants to upgrade for new graphics application and also the computer involves the onboard video card and a new video card is installed in the computer now you want to disabled it
So this can be done in the BIOS i.e basic input output system which is to be used for rebooting the computer system
And after disabled it, you cannot used.
