Answer:
The holding-period return if the treasury bill is held until maturity is:
= $300.
Explanation:
a) Data and Calculations:
Par value of Treasury bill = $10,000
Price paid for the bill = 9,700
Holding-period return = $300
Maturity period of the bill = 3 months
b) The holding-period return, otherwise called the yield, is the total return earned on the Treasury bill investment during the 3 months that it is held. The holding period is the 3-months time the Treasury bill is held by an investor, which corresponds to the period between the purchase date and sale date of the Treasury bill.
A provision requiring a construction contractor to pay $300 for every day it is late in completing the construction contract is:
Answer:
liquidated damages provision.
Explanation:
Liquidated damages can be regarded as one that is been presented in some particular legal contracts which is an estimate of otherwise intangible to one of the party or hard-to-define losses. It can be regarded as a provision which give room for the payment of a specified sum in case there is breach of contract by one of the parties. It can be regarded as contractual provision set up so that a party in breach will need to make a payment of pre-determined amount , which serve as compensation for failure by breaching partyin performing particular obligation.
For instance, provision requiring a construction contractor to pay $300 for every day it is late in completing the construction contract is liquidated damages provision.
write the work of an architectural engineer .
Answer:
?????????????????
?????????????????
Answer:
Architectural engineers apply science and technology to the real world by designing buildings that enhance our standard of living and improve our quality of life. They do this by combining building systems – structural, electrical, mechanical, lighting, acoustics and fire protection - into an integrated whole. These creative problem solvers are constantly facing the challenges of the future like sustainable building materials and green energy sources. Architectural engineers are trained to use the latest technologies – like computer based building design and analysis software (Revit, eQUEST, RISA-3D, etc), building information modeling (BIM), and advanced sensors & controls – to design, build, and operate the various systems within a building.
During its first year of business, XYZ Inc. purchased $1,600 of supplies. By the end of
the year, only $500 of supplies remain in the supply cabinet. Determine the amount to be
reported in the Supplies account in the Adjusted Trial Balance section of the worksheet
prepared on December 31.
Answer:
$500
Explanation:
Since adjusted trial balance is often prepared at the end of an accounting period in which based on the information given the supplies in inventory is on the last day of the accounting period in which only the amount of $500 of supplies was remaining in the supply cabinet, therefore the amount to be
reported in the SUPPLIES ACCOUNT in the Adjusted Trial Balance section of the worksheet
prepared on December 31 will be $500 of supplies remaining in the supply cabinet.
What is happening with Unemployment of Indonesia over the past 2 or 3 years?
Answer:
The unemployment rate in Indonesia increased to 6.26 percent in the first quarter 2021 from 4.94 percent in the same quarter a year earlier, amid the economic downturn caused by the coronavirus crisis. The number of unemployed persons surged by 1.82 million to 8.75 million. Meanwhile, the number of employed declined by 2.23 million to 131.06 million, mostly in the transportation and warehouse (-0.30 percent) while that in accommodation and food services reported the largest increase (0.34 percent). Meantime, the labor force participation rate declined to 68.08 percent in the first quarter from 69.21 percent in the prior year.
Explanation:
give 5 star
An owner lists her home at a 7% commission rate and wants to net $45,000 after paying the mortgage balance of $68,000 and the broker's commission. To the nearest dollar, what should the selling price be to net her $45,000
Answer: $121505
Explanation:
Let the selling price be represented by x.
Then the broker's commission will be:
= 7% of x = 0.07 × x = 0.07x
Based on the information given,
Selling price - (Mortgage balance + Broker's commission) = $45000
Therefore, x - ($68000 + 0.07x) = $45000
x - $68000 - 0.07x = $45000
x - 0.07x = $45000 + $68000
0.93x = $113000
x = $113000/0.93
x = $121505
Therefore, the selling price is $121505
The year 14 interest of a bond is the face line of the bond
Answer:
yes you are correct okay with you
An advance payment of $1,000 for services was received on December 1 and was recorded as a liability. By the end of the year, $400 had been earned. Demonstrate the December 31 adjusting entry by choosing the correct statement below.
a. Debit Service revenue for $400.
b. Debit Unearned revenues for $400.
c. Debit Unearned revenues for $600.
d. Credit Unearned revenues for $400.
Answer:
b. Debit Unearned revenues for $400.
Explanation:
When money is received in advance for a service that is yet to be rendered, the money is accounted for as a liability called deferred or unearned income.
The entries are
Dr Cash
Cr Deferred revenue
when the service is rendered, revenue is said to be earned with the following entries passed
Dr Deferred revenue
Cr Revenue
Hence when $1,000 for services was received on December 1 and was recorded as a liability
Dr Cash $1,000
Cr Deferred revenue $1,000
when $400 had been earned
Dr Deferred revenue $400
Cr Revenue $400
Option b is right
b. Debit Unearned revenues for $400.
Nut and Bolt guy Inc, sells nuts, bolts, fasteners and other related equipment. The CFO projects that net FCF for the next three years will be $11,000, $12,500 and $16,000, respectively. After that, the cash flows are expected to increase by 4.5 percent annually. What is the value of the firm if the WACC is 12.2%?
Answer:
$184791
Explanation:
The calculation of the value of the firm is given below:
Year Future Cash Flow PVF at 12.2% PV of Cash Flow
1 11000 0.891 9801
2 12500 0.794 9925
3 16000 0.708 11328
Total 31054
Present Value of Terminal Value
= [16000 × (1 + 0.045) ÷ 0.122 - 0.045] × 0.708
= [16720 ÷ 0.077] × 0.708
= 153737
Now
value of Firm = 31054 + 153737
= $184791
If a fixed asset, such as a computer, were purchased on January 1st for $3,750 with an estimated life of 3 years and a salvage or residual value of $150, the journal entry for monthly expense under straight-line depreciation is: (Note: EOM indicates the last day of each month.)
Answer:
EOM depreciation expense $100
accumulated depreciation $100
Explanation:
Depreciation is a method used in expensing the cost of an asset.
Yearly Straight line depreciation expense = (Cost of asset - Salvage value) / useful life
($3750 - $150) / 3 = $1200
Monthly depreciation = yearly depreciation / 12
1200 /12 = 100
Accumulated depreciation is sum of depreciation expense
All the individuals that buy the product for their personal consumption is called………
Answer:
A consumer
Explanation:
The cost of equity is ________. the interest associated with debt the rate of return required by investors to incentivize them to invest in a company the weighted average cost of capital equal to the amount of asset turnover
Answer:
If an = 3n - 2 , find a2
Explanation:
If an = 3n - 2 , find a2If an = 3n - 2 , find a2
Estimated inventory (units), March 1 17,000 Desired inventory (units), March 31 19,700 Expected sales volume (units): Area M 6,500 Area L 8,900 Area O 7,800 Unit sales price $15 The number of units expected to be manufactured in March is a.23,200 b.59,900 c.25,900 d.42,900
Answer:
c.25,900
Explanation:
The computation of the no of units expected to be manufactured is given below:
No of units manufactured is
= No. of units sold + Closing units - Opening units
= (6,500 + 8,900 + 7,800) + 19,700 - 17,000
= 25,900
Hence, the no of units expected to be manufactured is 25,900
Therefore the option c is correct
Mordica Company’s standard labor cost per unit of output is $22.00 (2.00 hours x $11.00 per hour). During August, the company incurs 2,340 hours of direct labor at an hourly cost of $9.90 per hour in making 1,300 units of finished product.
Required:
Compute the total, price, and quantity labor variances.
Solution :
Total labor variance = [(standard rate x standard hours) - (actual rate x actual hours)]
= [$11 x (1300 x 2)] - ($9.90 x 2340)
= $28600 - $23166
= $ 5434 unfavorable
Labor price variance = ( standard rate - actual rate) x actual hours
= ($11.00 - $9.90) x 2340
= $ 1.1 x 2340
= $2574 favorable
Labor quantity variance = standard x (standard hours - actual hours)
= $11.00 x [(1300 x 2) - 2340]
= $11.00 x (2600 - 2340)
= $11.00 x 260
= $2860 unfavorable
XYZ expects to sell 28,000 pools in 2019. It budgets the beginning inventory of Direct Materials, Work-in-process, and Finished goods to be 26,000; 0; 1,300 units; AND ending inventory to be 26,000; 0; 2,800 units. How many pools need to be produced
Answer:
the no of pools need to be produced is 29,500 units
Explanation:
The computation of the no of pools need to be produced is given below:
= Ending finished goods inventory units + number of units sold - beginning finished goods inventory units
= 2800 + 28000 - 1300
= 29500 units.
Hence, the no of pools need to be produced is 29,500 units
An owner can lease her building for $160,000 per year for three years. The explicit cost of maintaining the building is $55,000, and the implicit cost is $70,000. All revenues are received, and costs borne, at the end of each year. If the interest rate is 5 percent, determine the present value of the stream of:_______.
a. Accounting profits.
b. Economic profits.
Answer:
a. Accounting profits.
Account profit = Revenue - explicit cost
= 160,000 - 55,000
= $105,000
Present value of $105,000 per year for 3 years is:
= 105,000 * Present value interest factor of an Annuity, 3 years, 5%
= 105,000 * 2.7232
= $285,936
b. Economic profit
Economic profit = Revenue - explicit cost - implicit cost
= 160,000 - 55,000 - 70,000
= $35,000
Present value of $35,000 per year for 3 years:
= 35,000 * Present value interest factor of an Annuity, 3 years, 5%
= 35,000 * 2.7232
= $95,312
Note: The profits were treated as annuities as they were constant.
what is GDP of a country
Answer:
Gross Domestic Products (GDP) is a measure of the total market value of all finished goods and services made within a country during a specific period.
Explanation:
GDP is an acronym for Gross Domestic Products (GDP) and it can be defined as a measure of the total market value of all finished goods and services made within a country during a specific period.
Simply stated, GDP is a measure of the total income of all individuals in an economy and the total expenses incurred on the economy's output of goods and services in a particular country.
On a related note, Gross Domestic Products (GDP) is a measure of the production levels of any nation.
Basically, the four (4) major expenditure categories of GDP are;
I. Consumption (C).
II. Investment (I).
III. Government purchases (G).
IV. Net exports (N).
In conclusion, GDP is a measure of the total amount of finished goods and services produced by a country.
Desks by Daisy sells a student desk for $100 per unit. The variable cost per desk is $40 and Daisy's fixed costs of producing the desks equals $15,000 per month. Daisy needs to sell _______ desks per month in order to break-even.
Answer:
250
Explanation:
Breakeven quantity are the number of units produced and sold at which net income is zero
Breakeven quantity = fixed cost / price – variable cost per unit
$15,000 / (100 - 40)
$15,000 / 60
250
Supply is more elastic over long periods than over short periods because:_____.
a. producers can make more adjustments in the long run than in the short run.
b. consumers can make fewer adjustments in the long run than in the short run.
c. producers can make fewer adjustments in the long run than in the short run.
d. consumers can make more adjustments in the long run than in the short run.
Answer:
A
Explanation:
Price elasticity of supply measures the responsiveness of quantity supplied to changes in price of the good.
Price elasticity of supply = percentage change in quantity supplied / percentage change in price
If the absolute value of price elasticity is greater than one, it means supply is elastic. Elastic supply means that quantity supplied is sensitive to price changes.
Supply is inelastic if a small change in price has little or no effect on quantity supplied. The absolute value of elasticity would be less than one
The short run is a period where all factors of production are fixed. In the short run, a firm would continue to produce if price is above average variable cost. If this is not the case, it would shut down
The long run is a period where all factors of production are varied. It is known as the planning time for a company
Supply is more elastic in the long run than in the short run because the producer can make adjustments in the long run
On the first day of its fiscal year, Ebert Company issued $50,000,000 of 10-year, 7% bonds to finance its operations. Interest is payable semiannually. The bonds were issued at a market (effective) interest rate of 9%, resulting in Ebert receiving cash of $43,495,895. The company uses the interest method.
a. Journalize the entries to record the following:
1. sale of the bonds.
2. First semiannual interest payment, including amortization of discount.
3. Second semiannual interest payment, including a of discount.
b. Compute the amount of the bond interest expense for the first year.
c. Explain why the company was able to issue the bonds for only $43,495, 895 rather than for the face amount of $50,000,000.
Answer:
Ebert Company
Journal Entries:
1) Debit Cash $43,495,895
Debit Bonds Discounts $6,504,105
Credit Bonds Payable $50,000,000
To record the sale of the bonds at a discount.
2) First semiannual interest payment:
Debit Interest Expense $1,957,315
Credit Amortization $207,315
Credit Cash $1,750,000
To record the first semiannual interest payment.
3) Second semiannual interest payment:
Debit Interest Expense $1,966,644
Credit Amortization $216,644
Credit Cash $1,750,000
To record the second semiannual interest payment.
b. Bond interest for the first year = $3,923,959 ($1,957,315 + $1,966,644)
c. The company issued the bonds at a discount at a coupon rate of 7%, which is less than the market interest rate of the bonds (9%).
Explanation:
a) Data and Calculations:
Face value of bonds = $50,000,000
Price received = $43,495,895
Discount = $6,504,105
Coupon interest rate = 7%
Interest payment = semiannually
Maturity period = 10 years
Market (effective) interest rate = 9%
1) Cash $43,495,895 Bonds Discounts $6,504,105 Bonds Payable $50,000,000
2) First semiannual interest payment:
Interest Expense $1,957,315 Amortization $207,315 Cash $1,750,000
Cash payment = $1,750,000 ($50,000,000 * 3.5%)
Interest expense = 1,957,315 ($43,495,895 * 4.5%)
Amortization = $207,315
Fair value of bonds = $43,703,210 ($43,495,895 + $207,315)
3) Second semiannual interest payment:
Interest Expense $1,966,644 Amortization $216,644 Cash $1,750,000
Cash payment = $1,750,000 ($50,000,000 * 3.5%)
Interest expense = 1,966,644 ($43,703,210 * 4.5%)
Amortization = $216,644
the financial statements for banana company include the following items: 20x9 20x8 cash $51,500 $50,000 short-term investments 25,000 15,000 net accounts receivable 53,000 50,000 merchandise inventory 163,000 50,000 total assets 532,000 554,000 accounts payable 131,500 124,000 salaries payable 25,000 13,000 long-term note payable 59,000 53,000 compute the current ratio for 20x8. group of answer choices
Answer:
1000,$5000maaf kalo salah
Two leading home appliance companies, Globex Inc. and Pug Tech, are in competition for market share. In their quest for exciting new products, Globex employs an open innovation model, while Pug Tech pursues a closed innovation model. Which of the following statements is most likely true?
a. Globex has a greater chance of capturing market share.
b. Pug Tech has a superior absorptive capacity.
c. Pug Tech will protect its intellectual property with patents and trade secrets.
d. Globex is most concerned with securing first-mover advantages.
Answer: c. Pug Tech will protect its intellectual property with patents and trade secrets.
Explanation:
A closed innovation model means that the company develops the product internally instead of through collaboration with external sources.
Pug Tech will therefore produce new products internally. As a result, they will be able to protect these products from being copied by others through patents and trade secrets because the law will recognize that they have exclusive rights to the new technology seeing as they came up with it.
what are the basic requirement of ppe
Answer:
Personal safety equipment, commonly known as PPE, is the equipment used to minimize the risks causing severe injuries and diseases in the workplace.
Explanation:
Items like gloves, safety glasses, and shoes, earplugs or muffles, hard hats, breathing or coverings, jackets, and whole-body suits may be included in personal protective equipment.
All personal protective equipment should be designed and constructed in a safe and reliable manner. It should fit conveniently and promote the use of workers.
These wounds and diseases can be attributable to chemical, radiological, physical, electrical, mechanical, or other hazards in the workplace.
When engineering, employment practices, and administrative controls are not feasible or not sufficient, employers must provide their employees with personal protective equipment and ensure their proper utilization.
Describe the events that occur in an efficient market in response to new information that causes the expected return to exceed the required return. What happens to the market value
Answer:
The efficient market hypothesis tells, in an equilibrium, the price of stocks or security is an unbiased estimate of the true values.
Explanation:
Thus, in the equilibrium, of security prices are neither an overvalued nor are undervalued. Suppose the investors learn new information about the company that suggests there stock is worth more than the current price. The security gets undervalued expected return exceeds the required return. Increased in demand for security from the investors with this new information will thus bid up the market value plus reduce its expected return until they are equal.What is the process of managing costs
Answer:
Cost management is the process of estimating, allocating, and controlling project costs. The cost management process allows a business to predict future expenses to reduce the chances of budget overrun. Projected costs are calculated during the planning phase of a project and must be approved before work begins.
Explanation:
I know the answer by heart
You plan to purchase a $100,000 house using a 30-year mortgage obtained from your local credit union. The mortgage rate offered to you is 7.25 percent. You will make a down payment of 20 percent of the purchase price. Calculate your monthly payments on this mortgage.
Answer:
$545.74
Explanation:
The actual mortgage is the purchase price minus the down payment, based on the mortgage amount, the monthly payment can be determined using a financial calculator as shown below:
N=360(number of monthly payments in 30 years=30*12=360)
I/Y=7.25/12(monthly interest rate without the "%" sign)
PV=-80000($100,000-20%*$100,000=$80000)
FV=0(after all required payments , the balance of the mortgage balance would be zero)
CPT
PMT=$545.74
Zachary Electronics currently produces the shipping containers it uses to deliver the electronics products it sells. The monthly cost of producing 9,100 containers follows. Unit-level materials $ 6,400 Unit-level labor 6,400 Unit-level overhead 3,800 Product-level costs* 8,400 Allocated facility-level costs 28,000 *One-third of these costs can be avoided by purchasing the containers. Russo Container Company has offered to sell comparable containers to Zachary for $2.70 each. Required Calculate the total relevant cost. Should Zachary continue to make the containers
Answer:
Zachary Electronics
Zachary should continue to make the containers. It is cheaper to make than to buy from Russo Container Company.
Explanation:
a) Data and Calculations:
Production units = 9,100 containers
Unit-level materials $ 6,400
Unit-level labor 6,400
Unit-level overhead 3,800
Total unit-level costs $16,600
Product-level costs* 8,400
Allocated facility-level costs 28,000
Relevant or avoidable costs:
Unit-level materials $ 6,400
Unit-level labor 6,400
Unit-level overhead 3,800
Total unit-level costs $16,600
Product-level costs* 2,800 ($8,400 * 1/3)
Total relevant costs = $19,400 (to make)
Relevant cost to buy:
Offer from Russo Container company = $2.70 per container
Total cost from outside supplier = $24,500 ($2.70 * 9,100)
KNK bank receives a deposit of GHS 1,000 and observes a cash ratio of 10%. Assuming there is no cash drain(cashless economy) and all rxcess reserves are pushed into loans. a. what is the maximum amount of money that can be pushed into loans. b. what is the total increase in money supply with the bank?
The maximum amount of money which can be created from the deposit will be GHS 1,000 and the total increase in the money supply with the bank will be GHS 1,000 too.
Money supply has to do with the total amount of money that's in circulation in a particular period of time in an economy.
A) Based on the information given, the maximum amount of money which can be created from the deposit will be GHS 1,000.
B. The total increase in the money supply with the bank will be GHS 1,000. The reason for this is because there were no additional information that was given.
Read related link on:
https://brainly.com/question/3625390
Trong một cuộc khảo sát 64 khách hàng ở một tiệm ăn nhanh, thời gian đợi trung bình là 3 phút
và độ lệch chuẩn là 1,5 phút. Với độ tin cậy 98%, tìm khoảng tin cậy cho thời gian đợi phục vụ
trung bình của tiệm ăn này. Biết thời gian đợi phục vụ là biến ngẫu nhiên có phân phối (xấp xỉ)
chuẩn.
Answer:
Explanation:
N=64, x tb=3, S=1.5, 1-alpha= 0.98
=> 1- alpha/2 =0.49 => z alpha/2= 2.33
E= 2.33×1.5/ căn 64= 0.437
Khoảng cách [ x tb +- E]=[ 2.563; 3.437]
Blade Breeze Company manufactures ceiling fans and uses an activity-based costing system. Each ceiling fan has 20 separate parts. The direct materials cost is $70, and each ceiling fan requires 2.50 hours of machine time to manufacture. Additional information is as follows:
Activity Allocation Base Predetermined Overhead Allocation Rate
Materials handling Number of parts $ 0.08
Machining Machine hours 7.20
Assembling Number of parts 0.35
Packaging Number of finished units 2.80
What is the cost of machining per ceiling fan? (Round any intermediate calculations and your final answer to the nearest cent.)
A) $18.00
B) $70.00
C) $144.00
D) $196.00
Answer:
Machining= $18
Explanation:
Giving the following information:
Each ceiling fan requires 2.50 hours of machine time to manufacture.
Machining Machine hours 7.20
To calculate the cost of machining per ceiling fan, we need to use the following formula:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Machining= 2.5*7.2
Machining= $18
Roanoke Company produces chocolate bars. The primary materials used in producing chocolate bars are cocoa, sugar, and milk. The standard costs for a batch of chocolate (5,200 bars) are as follows:
Ingredient Quantity Price
Cocoa 400lbs. $1.25per lb.
Sugar 80lbs. $0.40per lb.
Milk 120gal. $2.50per gal.
Determine the standard direct materials cost per bar of chocolate. Round to two decimal places.
Answer:
$0.16
Explanation:
Particulars Quantity Price Amount
Cocoa 400 $1.25 $500
Sugar 80 $0.40 $32
Milk 120 $2.50 $300
Total $832
Standard direct materials cost per bar = Total amount / Number of bar
Standard direct materials cost per bar = $832 / 5,200 bars
Standard direct materials cost per bar = $0.16
