Your company is considering purchasing a machine for $270,000. This machine will bring revenues of $100,000 in the second year, of $150,000 in the third year, and of $75,000 in the fourth year. The machine will be worthless after the fourth year, so you will not be able to get any resale value out of it. If the interest rate is 6% per year, should you go ahead with this project?

Answers

Answer 1

Answer:

Yes we should go with this project because it has a positive NPV of $4,350

Explanation:

We need to calculate the net present value of the machine to decide whether to invest in the machine or not.

As per Given Data

Costs $270,000

Cash Inflows

Year 2      $100,000

Year 3      $150,000

Year 4      $75,000

Interest Rate = 6%

Net Present Value

As we know Net Present value is calculated by discounting each years cash flows using using the Weighted Average cost of Capital.

Year       Cash Inflows    Discount factor 13%  Present values

Year 0      $(270,000)     (1+6%)^-0                 $(270,000)

Year 2      $100,000        (1+6%)^-2                 $89,000

Year 3      $150,000        (1+6%)^-3                 $125,943

Year 4      $75,000          (1+6%)^-4                 $59,407  

Net present value                                            $4,350  


Related Questions

The required reserve ratio is 0.05. If the Federal Reserve buys​ $1,000,000 worth of bonds from a bond dealer who has her account at Bank XYZ above and she deposits the entire​ $1,000,000 into a checking account at Bank​ XYZ, what will be the new required and excess reserves for this bank​ (assume no new loans are​ made)? (Remember that required reserves are found by applying the required reserve ratio to the amount of total checkable​ deposits.)

Answers

Missing information:

total deposits in bank XYZ = $4,000,000

total reserves = $3,800,000

Answer:

the required reserve = $250,000

excess reserves = $4,550,000

Explanation:

required reserve ratio = 5%

the Fed buys $1,000,000 worth of bonds

the $1,000,000 are deposited entirely in bank XYZ

total checkable deposits will increase to $5,000,000

the required reserve = $5,000,000 x 5% = $250,000

excess reserves = total checkable deposits - total loans - required reserves = $5,000,000 - $200,000 - $250,000 = $4,550,000

Suppose that output (Y ) in an economy is given by the following aggregate production function: Yt = Kt + Nt where Kt is capital and Nt is the population. Furthermore, assume that capital depreciates at rate δ and that savings is a constant proportion s of income. You may assume that δ > s. 1. Suppose that the population remains constant. Solve for the steady-state level of capital per worker. 2. Now suppose that the population grows at rate n. Solve for the steady-state level of capital per worker. 3. Based on your answer to part 2) above, solve for the steady-state growth rates (in terms of n) of the following: (a) capital per worker (b) output per worker (c) capital (d) output

Answers

Answer:

Check the explanation

Explanation:

Yt = Kt + Nt

Taking output per worker, we divide by Nt

Yt/Nt = Kt/Nt + 1

yt = kt + 1

where yt is output per worker and kt is capital per worker.

a) With population being constant, savings rate s and depreciation rate δ.

ΔKt = It - δKt

dividing by Nt, we get

ΔKt/Nt = It/Nt - δKt/Nt ..... [1]

for kt = Kt/Nt, taking derivative

d(kt)/dt = d(Kt/Nt)/dt ... since Nt is a constant, we have

d(kt)/dt = d(Kt/Nt)/dt = (dKt/dt)/Nt = ΔKt/Nt = It/Nt - δKt/Nt = it - δkt

thus, Capital accumulation Δkt = i – δkt

In steady state, Δkt = 0

That is I – δkt = 0

S = I means that I = s.yt

Thus, s.yt – δkt = 0

Then kt* = s/δ(yt) = s(kt+1)/(δ )

kt*= skt/(δ) + s/(δ)

kt* - skt*/(δ) = s/(δ)

kt*(1- s/(δ) = s/(δ)

kt*((δ - s)/(δ) = s/(δ)

kt*(δ-s)) = s

kt* = s/(δ -s)

capital per worker is given by kt*

b) with population growth rate of n,

d(kt)/dt = d(Kt/Nt)/dt =

= [tex]\frac{\frac{dKt}{dt}Nt - \frac{dNt}{dt}Kt}{N^{2}t}[/tex]

= [tex]\frac{dKt/dt}{Nt} - \frac{dNt/dt}{Nt}.\frac{Kt}{Nt}[/tex]

= ΔKt/Nt - n.kt

because (dNt/dt)/Nt = growth rate of population = n and Kt/Nt = kt (capital per worker)

so, d(kt)/dt = ΔKt/Nt - n.kt

Δkt = ΔKt/Nt - n.kt = It/Nt - δKt/Nt - n.kt ......(from [1])

Δkt = it - δkt - n.kt

at steady state Δkt = it - δkt - n.kt = 0

s.yt - (δ + n)kt = 0........... since it = s.yt

kt* = s.yt/(δ + n) =s(kt+1)/(δ + n)

kt*= skt/(δ + n) + s/(δ + n)

kt* - skt*/(δ + n) = s/(δ + n)

kt*(1- s/(δ + n)) = s/(δ + n)

kt*((δ + n - s)/(δ + n)) = s/(δ + n)

kt*(δ + n -s)) = s

kt* = s/(δ + n -s)

.... is the steady state level of capital per worker with population growth rate of n.

3. a) capital per worker. in steady state Δkt = 0 therefore, growth rate of kt is zero

b) output per worker, yt = kt + 1

g(yt) = g(kt) = 0

since capital per worker is not growing, output per worker also does not grow.

c)capital.

kt* = s/(δ + n -s)

Kt*/Nt = s/(δ + n -s)

Kt* = sNt/(δ + n -s)

taking derivative with respect to t.

d(Kt*)/dt = s/(δ + n -s). dNt/dt

(dNt/dt)/N =n (population growth rate)

so dNt/dt = n.Nt

d(Kt*)/dt = s/(δ + n -s).n.Nt

dividing by Kt*

(d(Kt*)/dt)/Kt* = s/(δ + n -s).n.Nt/Kt* = sn/(δ + n -s). (Nt/Kt)

[tex]\frac{sn}{\delta +n-s}.\frac{Nt}{Kt}[/tex]

using K/N = k

[tex]\frac{s}{\delta +n-s}.\frac{n}{kt}[/tex]

plugging the value of kt*

[tex]\frac{sn}{\delta +n-s}.\frac{(\delta + n -s)}{s}[/tex]

n

thus, Capital K grows at rate n

d) Yt = Kt + Nt

dYt/dt = dKt/dt + dNt/dt = s/(δ + n -s).n.Nt + n.Nt

using d(Kt*)/dt = s/(δ + n -s).n.Nt from previous part and that (dNt/dt)/N =n

dYt/dt = n.Nt(s/(δ + n -s) + 1) = n.Nt(s+ δ + n -s)/(δ + n -s) = n.Nt((δ + n)/(δ + n -s)

dYt/dt = n.Nt((δ + n)/(δ + n -s)

dividing by Yt

g(Yt) = n.(δ + n)/(δ + n -s).Nt/Yt

since Yt/Nt = yt

g(Yt) = n.(δ + n)/(δ + n -s) (1/yt)

at kt* = s/(δ + n -s), yt* = kt* + 1

so yt* = s/(δ + n -s) + 1 = (s + δ + n -s)/(δ + n -s) = (δ + n)/(δ + n -s)

thus, g(Yt) = n.(δ + n)/(δ + n -s) (1/yt) =  n.(δ + n)/(δ + n -s) ((δ + n -s)/(δ + n)) = n

therefore, in steady state Yt grows at rate n.

Wayne Industries is building a new prototype riding lawnmower especially for women. The marketing strategy for the product has been developed and presented. The lawnmower is now being tested rigorously. This step will ensure that the product meets all the CPSC product specifications and leaves little chance for any product liability issues. Which step int he new product development process is this?
A) After this stage, no changes can be made in any aspect of the product design, features, or composition.
B) At this stage, the functional features and the intended psychological characteristics are combined.
C) The new product at this stage can be distributed through a full-scale roll-out immediately.
D) The new lawnmower is at the introductory stage of the lifecycle.
E) The new-product idea is at the last stage of the development process.

Answers

Answer:

The answer is option E) The new-product idea is at the last stage of the development process.

Explanation:

The are several stages in the development of a new product idea. Beginning with initial idea generation all the way to the final evaluation stage.

The new prototype riding lawnmower especially for women designed by Wayne Industries is at the last stage of the development process.

The last stage of the development process also known as the Evaluation phase is characterized by:

Presenting the marketing strategy developed for the product.ensuring that the product meets all the CPSC product specifications and leaves little chance for any product liability issues.

To encourage employee ownership of the company's common shares, KL Corp. permits any of its employees to buy shares directly from the company through payroll deduction. There are no brokerage fees and shares can be purchased at a 12% discount. During May, employees purchased 10,000 shares at a time when the market price of the shares on the New York Stock Exchange was $12 per share. KL will record compensation expense associated with the May purchases of:

Answers

Answer:

Dr Cash 105,600

Dr Compensation Expense 14,400

Cr Common Stock 10,000

Cr Paid-In Capital – Excess of Par 110,000

Explanation:

KL Corp Journal entry

Dr Cash 105,600

Dr Compensation Expense 14,400 (10,000*12*12%)

Cr Common Stock 10,000 (10,000*1)

Cr Paid-In Capital – Excess of Par 110,000

(10,000*(12-1))

A manufacturing company prepays its insurance coverage for a three-year period. The premium for the three years is $2,700 and is paid at the beginning of the first year. Eighty percent of the premium applies to manufacturing operations and 20% applies to selling and administrative activities. What amounts should be considered product and period costs respectively for the first full year of coverage?

Answers

Answer:

$720 and $180

Explanation:

According to the scenario, computation of the given data are as follows:

Premium for 3 years = $2,700

So, premium for 1 year = $2,700 ÷ 3 = $900 per year

Manufacturing operation percentage = 80%

Selling and administrative operation percentage = 20%

So, Premium for manufacturing operation = $900 × 80% = $720

And Premium for selling and admin operation = $900 × 20% = $180

Oriole Tire Co. just paid an annual dividend of $1.70 on its common shares. If Oriole is expected to increase its annual dividend by 3.10 percent per year into the foreseeable future and the current price of Oriole’s common shares is $19.65, what is the cost of common stock for Oriole? (Round intermediate calculations to 4 decimal places, e.g. 0.1555 and final answer to 2 decimal places, e.g. 15.25%.)

Answers

Answer:

Cost of common stock is 12.02%

Explanation:

The cost of common stock can be computed from share price formula given below:

share price=do*(1+g)/r-g

do is the dividend just paid which is $1.70

g is the expected dividend growth per year which is 3.10%

r is the cost of common stock which is unknown

share price is $19.65

by changing the subject of the formula:

r=do*(1+g)/share price+g

r=1.70*(1+3.10%)/19.65+3.10%

r=1.7527/19.65+3.10%

r=0.0892+3.10%=12.02%

The company's cost of capital which is also the cost of common stock is 12.02%

How are foreign exchange rates determined

Answers

Answer:

Currency prices can be determined in two main ways: a floating rate or a fixed rate. A floating rate is determined by the open market through supply and demand on global currency markets. ... 5 Therefore, most exchange rates are not set but are determined by on-going trading activity in the world's currency markets.

Answer: market forces for. a p e x

Explanation:

just did that bro

The five-step procedure designed by ethics consultant Leonard H. Bucklin of Corporate-Ethics. US for investigating and solving ethics problems is known as a. the Bucklin Method. b. the Ethical Investigation Protocol. c. Business Process Pragmatism. d. Ethical Decision Determination.

Answers

The correct answer is C. Business Process Pragmatism

Explanation:

Leonard H. Bucklin was a recognized American attorney mainly known for his texts about laws, ethics, and related topics. In the field of Corporate-Ethics Bucklin designed a method with five different stages to deal with ethical problems. This method was known as the Business Process Pragmatism as it was a systematic approach to deal with ethical issues in business. Moreover, this method involved inquiring about the problem, discussing important aspects and possible solutions, deciding or selecting the best solution, justifying the solution, and evaluating the outcome.

The single milling machine at Stout Manufacturing was severely overloaded last year. The plant operates eight hours per day, five days per week, and 50 weeks per year. Management prefers a capacity cushion of 15 percent. Two major types of products are routed through the milling machine. The annual demand for product A is 3000 units and 2000 units for product B. The batch size for A is 20 units and 40 units for B. The standard processing time for A is 0.5 hours/unit and 0.8 hours/unit for B. The standard setup time for product A is 2 hours and 8 hours for product B. How many new milling machines are required if Stout does not resort to any short-term capacity options

Answers

Answer:

If we assumes we setup machine for product A x times, and B y times, the total hours required is 0.5*3000 + 0.8*2000+ 2*x + 8 *y = 3100+2x+8y. Notice that due to the capacity restriction x has to be no smaller than 150 hours (3000/20) and y has to be no smaller than 50 hours (2000/40). so total required hours must exceed 3100+2*150+8*50=3800. The management prefer a 15% capacity cushion, which means the total duration prepared for the processing should be at least 3800*(1+15%)=4370 hours.

If one machine operates eight hours per day, five days per week and 50 weeks a year, it operates 5*8*50 = 2000 hours in total.

That's why we need 2 more machines ( 3 machines in total since 4370 > 2*2000).

Southern Rim Parts estimates its manufacturing overhead to be $318,000 and its direct labor costs to be $1,060,000 for year 1. The first three jobs that Southern Rim worked on had actual direct labor costs of $65,000 for Job 301, $90,000 for Job 302, and $175,000 for Job 303. For the year, actual manufacturing overhead was $399,000 and total direct labor cost was $834,000. Manufacturing overhead is applied to jobs on the basis of direct labor costs using predetermined rates.Required:a. How much overhead was assigned to each of the three jobs, 301, 302, and 303?b. What was the over- or underapplied manufacturing overhead for year 1?

Answers

Answer:

a. Job 301 = $19,500

Job 302 = $27,000

Job 303 = $52,500

b. Overhead applied for the year = $250,200

Under-applied overhead = $148,800

Explanation:

a. The computation of overhead was assigned to each of the three jobs, 301, 302, and 303 is shown below:-

Overhead application rate = Budgeted Overhead ÷ Application Base

Application base = Budgeted Overhead ÷ Budgeted Direct Labor costs

= $318,000 ÷ $1,060,000

= 0.3

Overhead assignment to jobs = Budgeted rate × Labor Cost

Job 301

= 0.3 × $65,000

= $19,500

Job 302

= 0.3 × $90,000

= $27,000

Job 303

= 0.3 × $175,000

= $52,500

b. The computation of over- or underapplied manufacturing overhead for year 1 is shown below:-

Overhead applied for the year = Total direct labor cost × Overhead rate

= $834,000 × 0.3

= $250,200

Under-applied overhead = Actual overhead - Applied overhead

= $399,000 - $250,200

= $148,800

Margie Company produces a single product and has provided the following data concerning its most recent month of operations: Selling price $ 88 Units in beginning inventory 0 Units produced 5,200 Units sold 4,900 Units in ending inventory 300 Variable costs per unit: Direct materials $ 12 Direct labor $ 23 Variable manufacturing overhead $ 2 Variable selling and administrative expense $ 5 Fixed costs: Fixed manufacturing overhead $ 161,200 Fixed selling and administrative expense $ 63,700 The total contribution margin for the month under variable costing is:

Answers

Answer:

$225,400

Explanation:

The computation of total contribution margin under variable costing is shown below:-

Sales (4900 × $88)                             $431,200

Less:Variable cost  

Direct material (4900 ×  $12)              ($58,800)  

Direct labor (4900 × 23)                    ($112,700)  

Variable manufacturing overhead

(4900 ×  2)                                            ($9,800)  

Variable selling and administrative

expenses (4900 × $5)                         ($24,500)  

Total variable expenses                     ($205,800)

Contribution margin                           $225,400

Therefore the total contribution margin under variable costing is $225,400

Melrose Company has an investment in bonds issued by Roscoe Industries that are classified as available-for-sale securities. The bonds were purchased at par. At December 31, Year 2, the Investment in Roscoe bonds account had a debit balance of $200,000, representing its amortized cost, and its Fair value adjustment account had a credit balance of $5,000. On December 31, Year 3, the amortized cost of those bonds had not changed, but the fair value of those bonds was $225,000.
Which of the following will be included in the related journal entry dated December 31, Year 3?

a. Debit to Fair value adjustment for $20,000.
b. Credit to Fair value adjustment for $20,000.
c. Debit to Fair value adjustment for $30,000.
d. Credit to Fair value adjustment for $30,000.

Answers

Answer:

c. Debit to Fair value adjustment for $30,000.

Explanation:

The Journal entry is shown below:-

On Dec 31,

Fair value adjustment account Dr, $30,000   ($225,000 + $5,000 - $200,000)

         To Unrealized holding gain on available for sale securities $30,000

(Being unrealized holding gain is recorded)

Here we debited the fair value adjustment account as it decreased the liabilities   and we credited the unrealized holding gain on available for sale securities as it increased the gain so the same is recorded .

Costs of $6,500 were incurred to acquire goods and make them ready for sale. The goods were shipped to the buyer (FOB shipping point) for a cost of $350. Additional necessary costs of $700 were incurred to acquire the goods. No other incentives or discounts were available. What is the buyer’s total cost of merchandise inventory?

Answers

Answer:

Total cost of merchandise inventory = $7,550

Explanation:

The total cost of merchandise inventory, is the sum total of all the costs incurred in the acquisition of the goods, and it is calculated as shown below:

cost of goods = $6,500

cost of shipping = $350

Additional necessary cost = $700

∴ Total cost of merchandise inventory = cost of goods  + cost of shipping + Additional necessary cost

Total cost of merchandise inventory = 6,500 + 350 + 700 = $7,550

On March 15, American Eagle declares a quarterly cash dividend of $0.045 per share payable on April 13 to all stockholders of record on March 30.

Required:

Record American Eagle's declaration and payment of cash dividends for its 226 million shares. (If no entry is required for a particular transaction/event, select "No Journal Entry Required" in the first account field. Enter your answers in dollars, not in millions (i.e. $5.5 should be entered as 5,500,000).)

Answers

Answer and Explanation:

The journal entries are shown below:

On March 15

Dividend Dr $10,170,000  (226 million shares × $0.045 per share)

     To Dividend payable $10,170,000

(Being the dividend is declared)

For recording this we debited the dividend as it increased the balance of dividend and credited the dividend payable as it increased the liabilities

On March 30

No journal entry is required for recording of dividend

On April 13

Dividend payable $10,170,000

     To cash $10,170,000

For recording this we debited the dividend payable as it decreased the liabilities and credited the cash as it reduced the assets

(Being the dividend payable is recorded)

On January 1, 2021, Swifty Corporation had 106000 shares of its $5 par value common stock outstanding. On June 1, the corporation acquired 10300 shares of stock to be held in the treasury. On December 1, when the market price of the stock was $13, the corporation declared a 15% stock dividend to be issued to stockholders of record on December 16, 2021. What was the impact of the 15% stock dividend on the balance of the retained earnings account?

Answers

Answer:

Decrease by $186,615

Explanation:

The impact of the 15% stock dividend on the balance of the retained earnings account is shown below:-

Shares = 106000 - 10300

= 95,700

Dividend of 15% = 95,700 × 15%

= $14,355

Value of shares = Dividend × Market price of the stock

= $14,355 × $13

= $186,615

So, the retained earning will decrease by $186,615

Consider two ways of commuting in a crowded city: taking public transportation, such as subway and buses, or driving your own car.
A person who chooses to take public transportation in a crowded city imposes a _________ externality on drivers. A policy implication of this result is a _________ those who take public transportation.
Persons who choose to drive their own cars to get around in a crowded city impose a _______ externality on other drivers. A policy implication of this result is a ________ those who drive their own cars.

Answers

Answer:

Positive; Subsidy for

Negative; Tax on

Explanation:

An externality is the economic term that describes a cost or benefit incurred or received by a third party, over which said party has no control over its development.

When externalities result in a benefit for a certain group they are said to be positive and when it is detrimental it is said to be negative.

Taking public transportation in a crowded city is benefitial to drivers making this a positive externality. In order to encourage people to take public transportation, a subsidy for those who take transportation may be adopted.

On the other hand, people who choose to drive their own car impose a negative externality and may encourage a tax on those who drive their own car.

A Company manufactures clay molded pottery on an assembly line. Its standard costing system uses two cost categories, direct materials and conversion costs. Each product must pass through the Molding Department and the Finishing Department. Direct materials are added at the beginning of the production process. Conversion costs are allocated evenly throughout production. Data for the Assembly Department for August 2017 are: Work in process, beginning inventory: 3000 units Direct materials (100% complete) Conversion costs (40% complete) Units started during August 695 units Work in process, ending inventory: 500 units Direct materials (100% complete) Conversion costs (65% complete) Costs for August: Standard costs for Assembly: Direct materials $15 per unit Conversion costs $35.50 per unit Work in process, beginning inventory: Direct materials $12,400 Conversion costs $9450 What is the balance in ending work-in-process inventory

Answers

Answer:

Ending work-in-process inventory is $19,037.50

Explanation:

First Determine the Equivalent Units in ending work-in-process inventory in terms of direct materials and conversion costs

Direct materials ( 500 units × 100%) = 500 units

Conversion costs (500 units × 65%) = 325 units

Then determine the Value of ending work-in-process inventory

Direct materials ( 500 units × $15)         = $ 7,500.00

Conversion costs (325 units × $35.50) = $ 11,537.50

Total                                                         = $19,037.50

Conclusion

Therefore, ending work-in-process inventory is $19,037.50

The following account balances are taken from the December 31, 2018, financial statements of ABZ Advertising Company. The company uses accrual basis accounting. Advertising Revenue $ 58,322 Cash 51,907 Accounts Receivable 8,426 Interest Expense 2,530 Accounts Payable 5,500 Operating Expenses 47,241 Deferred Revenue 1,476 Equipment 22,746 Income Tax Expense 2,916 The following activities occurred in 2019: Performed advertising services on account, $69,000. Received cash payments on account, $13,400. Received deposits from customers for advertising services to be performed in 2020, $4,500. Made payments to suppliers on account, $5,500. Incurred $56,450 of operating expenses; $48,950 was paid in cash and $7,500 was on account and unpaid as of the end of the year. What is the balance of Accounts Receivable at December 31, 2019

Answers

Answer:

Check the explanation

Explanation:

Particulars                                                      Amt

Opening Cash                                               51907

Add: Cash Received (13400+4500)            17900

Less: Payment to supplier                            5500

Less: Operating Expenses Paid                   48950

Closing Cash Balance                                  15357

A translation adjustment (or translation gain) that is a consequence of translation of a functional currency that is different from the reporting currency should be:_______.
A. Included in net income in the period in which it occurs.
B. Deferred and amortized over a period not to exceed 40 years.
C. Deferred until a subsequent year when a loss occurs and offset it against that loss.
D. Included as a separate item in the equity section of the balance sheet.

Answers

Answer:

d

Explanation:

wild guess

Your aunt is about to retire, and she wants to sell some of her stock and buy an annuity that will provide her with income of $53,000 per year for 30 years, beginning a year from today. The going rate on such annuities is 7.25%. How much would it cost her to buy such an annuity today

Answers

Answer:

Present Value= $641,494.12

Explanation:

Giving the following information:

Cash flow= $53,000 per year

Number of years= 30 years

Interest rate= 7.25%

First, we need to calculate the final value of the annuity:

FV= {A*[(1+i)^n-1]}/i

A= annual flow

FV= {53,000*[(1.0725^30)-1]} / 0.0725

FV= $5,237,351.32

Now, we can determine the present value:

PV= FV/(1+i)^n

PV= 5,237,351.32/ (1.0725^30)

PV= $641,494.12

Which of the following scenarios are potential candidates for the Chi-square test? Check all that apply. Group of answer choices Is there a relationship between gender and pet ownership? Is there a relationship between martial status (single, married, divorced, widowed) and political party affiliation (Democrat, Independent, Republican)? Is there a relationship between amount of credit card debt and employment status (unemployed, employed part-time, employed full-time)?

Answers

Answer:

A. Is there a relationship between gender and pet ownership?

B. Is there a relationship between marital status (single, married, divorced, widowed) and political party affiliation (Democrat, Independent, Republican)?

Explanation:

The chi squared test is a test in statistics used to establish the relationship between categorical variables. It seeks to compare the observed results in an experiment to the expected results. The test assumes that the variables being compared are independent of each other.

Categorical variables are descriptive and qualitative in nature. Numerical variables, on the other hand, deal with numbers. The amount of credit card debt is a numerical value, and therefore, does not qualify as a chi squared variable.

General cultural factors driving global business are

A. the rise of a global workforce, global economies of scale, and global production and operations.

B. growth of a global village spurred by television, the Internet, and computerization.

C. the rise of the global workforce, political stability, and a global knowledge base.

D. global communication and transportation technologies, a global knowledge base, and global social norms.

E. the development of global markets, political stability, and a global workforce.

Answers

Answer:

D. global communication and transportation technologies, a global knowledge base, and global social norms.

Explanation:

Global business management process involves identifying, analyzing and planning a business at the international level.

General cultural factors driving global business are global communication and transportation technologies, a global knowledge base, and global social norms.

When starting up a business with the intention to break into the global market successfully, it is important and necessary to ensure the cultural factors driving a business are well managed.

The business should ensure it creates a medium for effective communication by using both the traditional and digital media such as television, radio, billboards, blogs etc. Efficient means of transportation or logistics should be developed for smooth export of their goods and services.

Also, having a well informed knowledge of their niche is key to the success of the business.

Lastly, the business should abide with the global social norms.

Carlos is a 25% owner of CEBJ Builders, a company that specializes in residential construction. The other 75% of CEBJ is owned by his three brothers. During the year, Carlos spends 1,800 hours managing the operations of CEBJ. He also is the 100% owner of four rental properties and spends 125 hours a year maintaining the properties, more than any other individual. During the current year, the four properties generate a loss of $18,500. His adjusted gross income before considering the rental loss is $118,000.

What amount of the loss can Carlos deduct from the current year?

Answers

Answer:

$99,500

Explanation:

Adjusted gross income before considering the rental loss $118,000.

Less generated a loss of $18,500

Adjusted gross income $99,500

Carlos qualifies under the real estate professional exception due to the fact that he spends more than 50% of his personal service time in real property trade and the amount of time spent in real property trade is higher than 750 hours, he is as well the sole owner and spends more than 100hours.

Therefore the rental activity is not considered passive and he is allowed to offset the $18,500 loss against his active and portfolio income which is why Carlos'sadjusted gross income after considering the loss is $99,500 ($118,000 -$18,500)

Grab Manufacturing Co. purchased a 10-ton draw press at a cost of $183,000 with terms of 4/15, n/45. Payment was made within the discount period. Shipping costs were $4,300, which included $270 for insurance in transit. Installation costs totaled $12,900, which included $3,700 for taking out a section of a wall and rebuilding it because the press was too large for the doorway. The capitalized cost of the 10-ton draw press is: Multiple Choice $192,880. $190,880. $196,380. $197,880.

Answers

Answer:

$192,880

Explanation:

According to the scenario, computation of the given data are as follow:-

Cost of 10-ton draw press is $183,000 and if the cost paid before 15 days, there will be a 4% discount.

Discount Value is

= Cost of Draw Press × Discount Rate

= $183,000 × 4%

= $7,320

Total Capitalized Amount is

= (Total Cost of Draw Press - Discount Value) + Shipping Cost + Installation Cost

= ($183,000 - $7,320) + $4,300 + $12,900

= $175,680 + $4,300 + $12,900

= $192,880

According to the analysis, the capitalized cost of the 10-ton draw press is $192,880.  

Because any cost which incurred for using an asset should be capitalized.

 

• Why has the stock market declined so much?

Answers

We need a passage or something. not just the question

Brainliest for anyone if they get this CORRECT.

Answers

Answer:

UR FACE

Explanation:

magic

Answer:

6

Explanation:

Find the percentage for 24% of 25.

That's how I did mine.

11. a. Suppose David spends his income M on goods x1 and x2, which are priced p1 and p2, respectively. David’s preference is given by the utility function
(1, 2) = √1 + √2.
(i) Derive the Marshallian (ordinary) demand functions for x1 and x2. (25 marks)
(ii) Show that the sum of all income and (own and cross) price elasticity of demand
for x1 is equal to zero. (25 marks) b. For Jimmy both current and future consumption are normal goods. He has strictly convex and strictly monotonic preferences. The initial real interest rate is positive. If the real interest rate falls, in each of the following cases, argue what will happen to his period 2 consumption level? Clearly illustrate your argument on a graph.
(i) He is initially a borrower. (25 marks)
(ii) He is initially a lender. (25 marks)

Answers

Answer:

Explanation:

D

We can consider the case where wine producers in Chile ask the government to tax imported wines from France with a tax. They consider that this tax would increase both the State's tax revenue and employment in the Chilean wine industry. What kind of economic argument is this in relation to international trade? Do you agree or not with the argument presented by wine producers in Chile? If the state government adopts this position, does it consider it to be good economic policy or not? Briefly explain your answers using the concepts of international trade discussed in your Textbook.

Answers

Answer:

If the Government executes taxes on lavender trade from France (therefore creating French wine beloved than national wine), the local wine manufacturers would take pleasure in such a strategy because it would create French wine much economical (since it'll value extra) and therefore doubtless growth in local wine drinking. This might additional because additional service chances within the national wine region and conjointly rise the Government's government revenue (income from taxes on the wine trade). Such a procedure is hidden wanting i.e. an advocate procedure in expressions of Global trade wherever the govt. is protective the benefits of the native wine manufacturers by heavy imports.

If the Chilean wine trade isn't terribly inexpensive in relations of value, feature etc. and remains at an emergent phase then it's vital to safeguard the local trade from global competition.

Samco signed a 5​-year note payable on January​ 1, 2018​, of $ 475 comma 000. The note requires annual principal payments each December 31 of $ 95 comma 000 plus interest at 9​%. The entry to record the annual payment on December​ 31, 2021​, includes A. a debit to Interest Expense for $ 17 comma 100. B. a debit to Interest Expense for $ 42 comma 750. C. a credit to Cash of $ 137 comma 750. D. a credit to Notes Payable for $ 95 comma 000.

Answers

Answer:

Option A, a debit to Interest Expense for $ 17 comma 100 is correct

Explanation:

The principal amount on 1st January 2021 needs to be established since that would be the amount left after 2018,2019,2020 principals have been repaid

Principal at 1st January 2021=$475,000-($95,000*3)=$190000

Interest on principal in 2021=$190000 *9%=$17100

Total repayment in 2021=principal plus interest=$95,000+$17,100=$ 112,100.00  

The $95,000 would be a debit to notes payable not credit hence option is wrong.

Only option A,a debit of $17,100 to interest expense is correct

You should meet with your academic adviser at least once a __________.
Group of answer choices

Answers

Answer:

Once a Semester

Explanation:

Advisors can help you decide if you want to minor in something, and what the requirements are. They can ensure you're odds of graduating in four years is on track, or give you special permissions to take certain classes.

Other Questions
How is the distributive property used when multiplying two binomials IM SO DUMB I NEED HELP A religion based on the teachings of Buddha please help! BRAINLIEST to right answer Is p = 11 a solution to the inequality below?p > 5 The government has little control over the economy in a command economy Which of the following best describes the main characters in "The Daughtersof the Late Colonel"?O A. Two young and frightened girlsB. Two sisters who didn't know their father had diedC. Two sisters competing for their father's willD. Two indecisive, elderly, single women why are days were getting shorter and nights longer A sector with a radius of 8 cm has an area of 56pi cm2. What is the central angle measure of the sector in radians? 1. Generate ideas.2. Check the order of ideas.3. Draft an outline.4. Correct grammatical errors.Which two tasks are part of the revising and editing stage of the writing process? which is older the chocolate chips or the cookie dough? (Remember: older means formed first)I need help with that question I been struggling with it and having a hard time pls help me out and is due today 7532 Question 1 of 7 The equation 4x 45 = y is used to find your profit, y, in dollars from buying $45 of supplies and washing cars for $4 each. What does the x stand for? Which is the coldest temperature? Explain how you determined this using the number line. whoever answers correctly first will get brainiestwhats my middle name....?clues:a_n_l i_ e3 missing lettersfill in the blanks! hehe Find the area of the shape? In IJK, the measure of K=90, the measure of J=76, and JK = 3.6 feet. Find the length of IJ to the nearest tenth of a foot. You are assigned a computer generated 4-digit password to access your new voice mail account. If thedigits can not be repeated, how many passwords are possible?b34 different passwords are possible5,040 different passwords are possible40 different passwords are possible10,000 different passwords are possibled Here are two steps from the derivation of the quadratic formula (picture included)what took place between the first step and the second step?A. factoring a perfect square trinomial B. completing the square C. taking the square root of both sides Based on the ethical PEAS framework for ethical decision by Montana State University and two websites (A framework for thinking ethically and Introduction: Using Ethics Test), how many ethics guidelines/principles/approaches/tests should you use to assess the situation or solution alternatives? can someone make random 5 easy questions so I can do them?