Answer:
force of gravity 1.2 N
Explanation:
dont know for sure but here's what I got
Why type of data must be plotted on a graph for the slope of the line to represent density?
Answer:
you need data that has at least one independent variable in order to plot a graph for a slope of the line
Explanation:
Why was the International System of Units chosen?
please answer this soon
Answer: The SI system is easier and more consistent. If the Klingons in the next galaxy know the definitions of metric, they can replicate the measures on their own planet. With English, they'd need to grab a yardstick the next time they did a crop circle.
Explanation: I'll use "SI" for the International System of Units. There are several key benefits;
Unlike the English system, there are base units that form a standard for various measures: length (meter), mass (kg), Time (sec), electric current (Ampere), temperature (Kelvin), amount of a substance (moles), and candela (luminous intensity). A system of prefixes allow the base unit to be easily changed to accomodate larger and smaller quantities. 1,000 grams is 1 kg. 1000 meters is a kilometer (km), etc. In English, it isn't so easy. An English unit of measure may read "1 mile, 34 yards, 2 feet, and 6 and 1/8 inches." In metric it would simply read 1698.5 meters, or 1.698.5 km. Imagine the difference in finding the area of a rectangle in English vs metric: Either 1) 2ft, 3 and 13/16" times 4ft, 8 and 1/16 inches, or 2) 1.833 meter by 2.877 meter.The metric system has standards that allow a high degree of calibration. Distance is calibrated to the speed of light and time is calibrated tio a vibrating atom, for example.What method could be used to separate the components of gasoline?
Explanation:
The separation of gosoline from crude oil by heating until it reaches its boilling point is a separation technique called fractional distillation .It is the separation of a mixture such oil into their respect fraction.
Answer:
The answer is B, Distillation.
Explanation:
A teacher is instructing students about the states of matter. He wants to compare the
numbers of elements that exist as solids, gases, and liquids at room temperature.
Which kind of illustration should the teacher use to present this information?
The teacher can present this information using a bar chart.
In science, charts are commonly used to present information where comparison is necessary.
Bar charts are especially useful when we intend to show large changes.
In the periodic table, elements exists in various states of matter;
SolidLiquidGasSometimes, as a teacher, you may need to compare the number of elements that exist as solids, gases, and liquids at room temperature.
This comparison is easily brought out using a bar chart since the changes involve large numbers.
Learn more; https://brainly.com/question/18092827
1 Rajah 1 menunjukkan satu contoh mikroorganisma. Diagram 1 shows an example of microorganisms. 0 Rajah 1 / Diagram I Antara yang berikut, yang manakah pengelasan yang betul bagi mikroorganisma ini? Which of the following is the correct classification for this microorganism? A Alga / Algae B Fungi / Fungi C Virus / Virus D Bakteria / Bacteria
Answer:
d. Bacteria is the correct classification
Which of these could be a measurement of an object’s mass?
a. 24 newtons
b. 24 grams per milliliter
c. 24 meters
d. 24 grams
Answer:
Mass is a measure of the amount of matter in a substance or an object. The basic SI unit for mass is the kilogram (kg), but smaller masses may be measured in grams (g). To measure mass, you would use a balance.
A car travels 4 miles in 0.08 hours. The speed of the car is miles/hr.
advantages and disadvantages of chemistry
Answer:
Advantages of chemistry:-
•Basic knowledge of chemistry helps you to read and understand product labels.
•Chemistry can help you make informed decisions.
•Chemistry is at the heart of cooking. ...
•A command of chemistry can help keep you safe!
Disadvantages of chemistry:-
•It isn't a sustainable form of energy. ...
•It can be expensive.
•It can produce harmful waste.
•It can be used to create devastating weapons.
help with the 3rd question plslsls I’ll brainlist.
1 - energy 2- heat 3 -plant
Which of the following is an
example of a homogeneous
mixture?
A. fruit punch
B. a sandwich
C. a toolbox
Answer:
fruit punch
Explanation:
............
A homogeneous mixture is a composition of two or more
impure substances in a definite proportion, displaying non-
uniform characteristics.
TRUE
FALSE
The answer is FALSE. I did it on ck-12
Each of the following can be used to make observations, except: *
A calculator
A digital scale
Your sense of smell
A microscope
Answer:
Calculator
Explanation:
A calculator is used to make, well calculations
You can use a scale to get information about the weight of an object, and you can observe how weight changes in relation to size etc.
For obvious reasons, you can observe different scents
Again a microscope is an observational tool
1.) What is a scientific method
2.) What must you always do if you want your statement taken seriously
3.) The scientific method starts with a.
32. List three examples of substances. Explain why each
is a substance. (3.1)
Answer: Chemical X H3 and f1
Explanation:
oops i dont think i meant to do this
1. Name 3 elements that are found in the same family/group
Answer:
Lithium, Hydrogen, Sodium, or Oxygen, Sulfur, Selenium They are all in the same column. Find three elements in the same family and list them. 4. Oxygen, Carbon, Nitrogen, Aluminum, Silicon, Phosphorous They are all in the same row
Explanation:
When a metal such as copper is heated,it expands. Can anyone tell me what happens to the metal particles as the solid metal expands?
Answer:
The metal molecules inside start to vibrate faster, causing the solid to change to liquid if exposed to the intense temperature over a long period of time.
Explanation:
As my answer states, but for an explanation, lets say you are boiling an ice cube, it will start to turn into liquid water, that is because it has been exposed to that heat for a long period of time. The same will happen for the metal, if its exposed for long enough, it will turn into a liquid, then can be turned into a gas because the molecules are vibrating so quickly that they start to easily move apart.
Hope this helps, let me know if any more clarification is needed.
CAN SOMEONE PLEASE HELP ME OUT !!!
Answer:
133242535455555555555555
Explanation:
What conditions might cause a
scientist to modify
or revise a
hypothesis
Answer:
Upon analysis of the results, a hypothesis can be rejected or modified, but it can never be proven to be correct 100 percent of the time. For example, relativity has been tested many times, so it is generally accepted as true, but there could be an instance, which has not been encountered, where it is not true.
Explanation:
Can someone plz help me ? :(
Answer:
C. A persons lost limb can be replaced with an advanced robotic limb
Which of the following diagrams shows a pure substance that is composed of only individual atoms and not molecules?
Answer:
Ar
Explanation:
the last one
The diagram that shows a pure substance which is composed of only individual atoms and not molecules will be: argon gas. Option D is correct.
A pure substance composed of only individual atoms is called an element. In the periodic table, each element is represented by a unique symbol, and its atoms cannot be further broken down into simpler substances by chemical means.
Liquid water: Water (H₂O) is a compound composed of two hydrogen atoms bonded to one oxygen atom. It consists of molecules, not individual atoms.
Hydrogen gas: Hydrogen gas (H₂) is composed of two hydrogen atoms bonded together to form a diatomic molecule. It is not composed of individual atoms.
Carbon dioxide GAS: Carbon dioxide (CO₂) is a compound consisting of one carbon atom bonded to two oxygen atoms, forming a molecule of CO₂.
Argon gas: Argon (Ar) is an element, and in its pure form as a gas, it exists as individual argon atoms (Ar). It is not bonded to any other atoms, and there are no molecules involved. Therefore, argon gas is composed of individual atoms and represents a pure substance.
Hence, D. is the correct option.
To know more about argon gas here
https://brainly.com/question/29791626
#SPJ3
The volume of a brick is 52 cubic inches. Which choice best describes its volume?
Answer:
I think he was right but not explaining
Explanation:
I think it is C cause.... the volume of a material is the amount of matter that matterial can hold. it should the the amount of space the whole material takes up.
so C is the answer.
pls make this the brainliest.
not because it is, but because I asked.
Write 0.034 in scientific notation.
Answer:
0.034 = 34×10^-3
Explanation:
This is because the special point is notated until it goes in front of the first counting number
Scientific notation is a way of expressing numbers that are very large or very small in a compact and standardized format. 0.034 in scientifc notation is written as 3.4 × 10⁻³
In scientific notation, a number is expressed as the product of a coefficient and a power of 10. The coefficient is a decimal number greater than or equal to 1 but less than 10, and the power of 10 represents the magnitude of the number. The power of 10 indicates the number of places the decimal point must be moved to obtain the original number.
For example:
The number 4,500,000 can be written in scientific notation as 4.5 x 10⁶, where the coefficient is 4.5 and the power of 10 is 6.
The number 0.000043 can be written in scientific notation as 4.3 x 10⁻⁵, where the coefficient is 4.3 and the power of 10 is -5.
Scientific notation allows for easy representation of very large or small numbers and simplifies calculations involving these numbers. It is particularly useful in scientific fields where values such as distances, masses, and concentrations can vary over a wide range.
Learn more about Scientific notation, here:
https://brainly.com/question/19625319
#SPJ6
is energy absorbed or released to separate the atoms in water molecules
Answer:
First of all, Energy is released when water molecules bond.
Explanation:
When a bond is formed its stability increases from their respective atoms. So energy is released but when we are breaking a bond we are changing a compound to a lower energy state to higher energy state it's stability decreases and requires a bit of extra energy higher stability of bond higher energy required to break it…
I NEED THE ANSWER QUICKKK!!!
Match each step of the scientific method with its matching example.
Match Term Definition
Analysis A) Based on what other scientists have done, algae life cycles are affected by light.
Research B) Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.
Conclusion C) The data recorded in the experiment supports the hypothesis about how algae reproduce.
Experiment D) The growth of green algae is recorded every day for several weeks and compared.
Answer: This is hard to do accurately, but here is my best assessment.
Explanation:
Experiment: B - describes how the experiment was done
Conclusion: A - The data support the prevailing hypothesis
Research: D - This is what we analyzed
Analysis: C - We compared the data
A girl pushes a toy boat to the right with a 15 N force. A boy pushes the same boat to the left with a 20 N force. what is the net force? what will happen?
Answer:
the net force is 5. I believe the boat with move to the left due to the increase amount of force the boy is using to push the boat.
Convert 355 degrees C to K.
Answer: 628.15 K
Explanation:
Add 273.15 to any temperature in Celsius to get it in kelvin
Each of the following can be used to make observations, except:
How many micrograms (ug)
are equal to 0.000520 grams?
[?] ug
Answer:
520
Explanation:
This is easy
negative
in your own words, why dose a car have
accelerction when it stops at a stop light?
Answer:
since it has lower mass. the force acting on it results in larger acceleration.
