Zinnia wrote the following proof to show that the diagonals of rectangle ABCD are congruent:

Zinnia's proof:
Statement 1: Rectangle ABCD is given
Statement 2: segment AD ≅ segment BC because opposite sides of a rectangle are congruent
Statement 3: segment DC ≅ segment DC by the reflexive property of congruence
Statement 4: Angles ADC and BCD are both right angles by definition of a rectangle
Statement 5: Angles ADC and BCD are congruent because all right angles are congruent
Statement 6:
Statement 7: segment AC ≅ segment BD by CPCTC

Which statement below completes Zinnia's proof? (1 point)

Triangles ADC and BCD are congruent (by ASA postulate)

Triangles ADC and BCD are congruent (by SAS postulate)

Triangles ADC and CBA are congruent (by ASA postulate)

Triangles ADC and CBA are congruent (by SAS postulate)

Answer:

Matt would walk 8 miles in to hours.

Step-by-step explanation:

15 minutes is 1/4 of an hour, meaning it would be 1/8 of 2 hours.

1 mile times 8 = 8 miles

Hope that helps!

Sea "x" la longitud de cada lado del jardín original en metros.

La superficie del jardín original es x^2 m².

Si cada lado del jardín original se aumenta en 5 m, el nuevo lado del jardín será de (x+5) metros, y la nueva superficie será (x+5)^2 m².

Según el problema, la nueva superficie total es de 121 m²:

(x+5)^2 = 121

Tomando la raíz cuadrada en ambos lados:

x+5 = 11

Restando 5 en ambos lados:

x = 6

Por lo tanto, la longitud de cada lado del jardín original es de 6 metros.

Por lo tanto, la respuesta correcta es O 6 metros.

x - the length of each side of the original garden

A = x²

( x + 5 )² = 121  /√

x + 5 = 11,  or  x + 5 = - 11;

x = 11 - 5

x = 6  ( another solution in negative )

Answer:

A ) 6 m

By using sample standard deviation - (1) N or n = 20

(2) X or μ = 43.4

(3) σ = 9.78 and s = 10.04

Why does sample standard deviation exist?

When we talk about a sample standard deviation, we're not talking about population standard deviation. The average amount by which a group of values deviates from their mean is shown by the statistical measure of variability known as the standard deviation.

We are given with the following data set below;

{51, 48, 42, 43, 48, 48, 46, 15, 29, 45, 47, 55, 46, 35, 47, 48, 54, 26, 53, 42}

(1) As we can see in the above data that there are 20 data values in our data set which means that the value of N or n (numner of observations) is 20.

(2) The formula for calculating Mean of the data, i.e. X or μ is given by;

       Mean  =  51 +48+ 42+ 43+ 48 + 48 + 46+ 15+ 29+ 45+ 47+ 55+ 46+ 35+ 47+ 48+ 54+ 26+ 53+ 42/20

                = 868/20 = 43.4

So, the value of  X or μ   is 43.4.

(3) The formula for calculating population standard deviation () is given by;

  Standard deviation, σ  = √(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20

        =  9.78

Similarly, the formula for calculating sample standard deviation (s) is given by;

       Sample Standard deviation, s =  

                       √(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20 - 1

                      =  10.04

Learn more about sample standard deviation

brainly.com/question/24277447

#SPJ1

Where F_pivot is the magnitude of the force exerted on the pivot point.

What are perpendicular lines?

Perpendicular lines are lines that intersect at a right angle (90 degrees). In other words, if you draw a line perpendicular to another line, the two lines will form four right angles at the point where they intersect.

(a) The torque applied by the adult rider (on the left) can be calculated as the product of the force applied by the rider and the perpendicular distance from the pivot to the force. Let F_a be the force applied by the adult rider and let r_a be the perpendicular distance from the pivot to the force. Then, the torque applied by the adult rider is:

τ_a = F_a * r_a

The perpendicular distance r_a can be calculated using the Pythagorean theorem:

r_a = sqrt((L/2 - d)^2 + Xoffset^2)

Therefore, the torque applied by the adult rider is:

τ_a = F_a * sqrt((L/2 - d)^2 + Xoffset^2)

(b) Similarly, the torque applied by the child rider (on the right) can be calculated as:

τ_c = F_c * sqrt((L/2 + d)^2 + Xoffset^2)

where F_c is the force applied by the child rider and r_c is the perpendicular distance from the pivot to the force, which can be calculated using the Pythagorean theorem.

(c) The torque applied by the board can be calculated as the sum of the torques applied by the two riders:

τ_b = τ_a + τ_c

Substituting the expressions for τ_a and τ_c, we get:

τ_b = F_a * sqrt((L/2 - d)^2 + Xoffset^2) + F_c * sqrt((L/2 + d)^2 + Xoffset^2)

(d) To determine the distance d in terms of given quantities and variables, we can use the condition for static equilibrium, which requires that the sum of the torques about the pivot point is zero:

τ_a + τ_c = 0

Substituting the expressions for τ_a and τ_c and simplifying, we get:

F_a * (L/2 - d) = F_c * (L/2 + d)

Solving for d, we get:

d = (F_a/F_c - 1) * L/4

Substituting F_a = Mg and F_c = mg, where M is the mass of the adult rider, m is the mass of the child rider, and g is the acceleration due to gravity, we get:

d = (M/m - 1) * L/4

(e) The magnitude of the force exerted on the pivot point by the see-saw while in use can be calculated using the condition for static equilibrium, which requires that the sum of the forces in the vertical direction is zero:

F_a + F_c = Mg + mg

Substituting F_a = Mg and F_c = mg, we get:

F_pivot = Mg + mg

Therefore, where F_pivot is the magnitude of the force exerted on the pivot point.

To learn more about perpendicular line from the given link:

https://brainly.com/question/29268451

#SPJ1

Answer:

Step-by-step explanation:1.4 -1, 1 2, -1

The value of the expression 2.1 × 1.6 = 3.36.

Decimals are a collection of numbers falling between integers on a number line. They are only an additional mathematical representation of fractions. Decimals allow us to express quantifiable quantities like length, weight, distance, money, etc. with more accuracy. Integers, also known as whole numbers, are represented to the left of the decimal point, while decimal fractions are shown to the right of the decimal point.

Given that the expression is: 2.1 × 1.6.

2.1 × 1.6 can be written as:

2.1 × 1.6 = 21/10 × 16/10

Multiply the numerator and denominator:

21/10 × 16/10 = 336/100

Covert the fraction into decimal:

336/100 = 3.36

Hence, the value of the expression 2.1 × 1.6 = 3.36.

Learn more about decimals here:

https://brainly.com/question/30958821

#SPJ1

Answer:

Answer:

9 x 3/9

27/9

27 ÷ 9

Step-by-step explanation:

You're welcome.

There are 3 seniors who take Math and Spanish, but not Physics.

What is Venn Diagram?

A diagram representing mathematical or logical sets pictorially as circles or closed curves within an enclosing rectangle (the universal set), common elements of the sets being represented by the areas of overlap among the circles.

To solve this problem, we can use a Venn diagram to organize the information given about the students.

First, we know that there are 150 seniors in total, so we can label the outer rectangle of the Venn diagram as having a total of 150 students.

Next, we can label the three circles as Math, Spanish, and Physics, with the numbers given in the problem:

80 seniors take Math, so we label the Math circle with 80.

41 seniors take Spanish, so we label the Spanish circle with 41.

54 seniors take Physics, so we label the Physics circle with 54.

We also know that 10 seniors take Math and Spanish, 19 take Math and Physics, 12 take Physics and Spanish, and 7 take all three. We can label these overlaps in the Venn diagram as follows:

The overlap of Math and Spanish is 10.

The overlap of Math and Physics is 19.

The overlap of Physics and Spanish is 12.

The overlap of all three is 7.

To find the number of seniors who take Math and Spanish, but not Physics, we need to subtract the number of seniors who take all three (because they are counted in all three circles) and the number of seniors who take Math, Spanish, and Physics (because they are counted in the overlap of all three circles). Then we add the number of seniors who take only Math and Spanish (because they are not counted in the Physics circle).

Using the formula for the number of elements in the union of three sets, we have:

Math or Spanish or Physics = Math + Spanish + Physics - (Math and Spanish) - (Math and Physics) - (Spanish and Physics) + (Math and Spanish and Physics)

So, the number of seniors who take Math and Spanish, but not Physics is:

Math and Spanish - (Math and Spanish and Physics) + (Math or Spanish or Physics - (Math + Spanish + Physics) + (Math and Spanish and Physics))

= 10 - 7 + (80 + 41 + 54 - 2(10) - 2(19) - 2(12) + 7)

= 3

Therefore, there are 3 seniors who take Math and Spanish, but not Physics.

To learn more about Venn Diagram, click on the link:

https://brainly.com/question/2099071

#SPJ1

The values of the function from the graph are h(7) = 10, h(0) = 9, h(t) = 8, t = 5 and  h(t) = 0, t = 4

Given that the graph is the graph of height as a function of time

To calculate the values of h(t) from the graph of g(x), we need to follow these steps

Using the above, we have the following

h(7) = 10

h(0) = 9

h(t) = 8, t = 5

h(t) = 0, t = 4

Read more about functions at

https://brainly.com/question/1415456

#SPJ1

The line segment AB and CB are perpendicular to each other.

Check whether the slopes of the lines are the negative reciprocals of one another to see if they are perpendicular to one another. The steps are as follows:

Learn more about Coordinates here:

brainly.com/question/18269861

#SPJ1

Answer:

Step-by-step explanation:

The inequality in the first equation is x > 8.

The inequality for the second graph is x ≤ -4 since it's a dot.

Answer:

7 miles

Step-by-step explanation:

Note there are 63,360 inches in a mile.

So, rewrite scale as 1 inch: 1 mile, where inch replaces the unit.

Therefore 7 inches: 7 miles.

Answer:

I HOPE ITS HELPFUL

Step-by-step explanation:

Cost price of 300 articles = ₹1500Hence cost of each item = 1500/300 = ₹5With 20% profit, selling price of each item = 5 * 120/100 = ₹6Hence, total selling price of 260 items = 260 * 6 = ₹1560Selling price of balance items = 6/2 = ₹3Total selling price for balance items = 40 * 3 = ₹120Total selling price = 1560 + 120 = ₹1680Profit gained = 1680 - 1500 = ₹180Profit percentage = 180/1500 * 100 = 12

The probability of waiting at least 26 minutes is 0.316. The average waiting time is 19 minutes.

Step 1:

The probability of waiting at least 26 minutes can be calculated by finding the area under the probability density function from 26 to 38:

P(waiting at least 26 minutes) = ∫26^38 (1/38) dt = [t/38] from 26 to 38

= (38/38) - (26/38) = 12/38 = 0.316

So the probability of waiting at least 26 minutes is 0.316 or approximately 0.316 rounded to 3 decimal places.

Step 2:

The average waiting time can be calculated by finding the expected value of the probability density function:

E(waiting time) = ∫0³⁸ t f(t) dt = ∫0³⁸ (t/38) dt

= [(t²)/(238)] from 0 to 38

= (38²)/(238) = 19

Therefore, the average waiting time is 19 minutes.

Learn more about probability here: brainly.com/question/30034780
#SPJ4

Answer:

7. 23      

8. (3 - 8) x 5

Step-by-step explanation:

I think the second one is right but I know the first one is.

Answer:

A right angled triangle is similar to triangle ABC

Step-by-step explanation:

If you tilt the triangle and put it straight, you'll see that angle C is equal to 90°

And if a triangle has one angle of 90° then it is a right angled triangle

Hope you understand :)

The given statements are true or false are shown below, about linear system has n variables and m equations, then the augmented matrix has n rows.

First, let's write how A and C look like.

A = [C|b], where b is the constant matrix.

(a) False.

Example

[tex]\left[\begin{array}{ccc}1&0&2\\0&1&3\\\end{array}\right][/tex]

We can see that z = t and so we have infinitely many solutions but there's no row of zeros.

(b) False.

Example

[tex]\left[\begin{array}{cc}1&0&0\1&1&0&0\\\end{array}\right][/tex]

Here; x1 = 1 and x2 = 1 is a unique solution and we have a row of zeros.

(c) True.

In the row-echelon form, the last row is either a row of zeros or a row that contains a leading 1. If the row has a leading 1, then there is a solution. Since we assume there is no solution, then the row must be a row of zeros.

(d) False.

Example

[tex]\left[\begin{array}{cc}1&3\\0&0\end{array}\right][/tex]

Here; x₁ = 1 − 3t and x2 = t. Thus, the system is consistent.

(e) True.

Suppose we have a typical equation in a system

а1x1 + A2X2 + ··· + anxn = b

Now, if b≠0 and x1 = x2 = ··· = x₂ = 0, then the system is Xn inconsistent. But, if b = 0, then we have a solution.

(f) False.

Example

[tex]\left[\begin{array}{cc}1&2&0&0\end{array}\right][/tex]

If a = 0, then it's consistent(infinitely many solutions) but if a 0, then it's inconsistent.

(g) Ture.

Since the rank would be at most 3 and this will lead to a free variable (4 columns in C and the rank is 3, so there is at leat 1 free variable). Thus, the system has more thatn one solution.

(h) True.

Because the rank is the number of leading 1's lying in different rows and A has 3 rows. Thus, the rank ≤ 3.

(i) False.

Because we could have a row of zeros in C and a leading 1 in A. In other words, a31 = a32 = A33 = A34 = 0 and c3 1. This makes the system inconsistent.

(j) True.

If the rank of C = 3, then there will be a free variable and this means the system is consistent.

Learn more about linear system:

https://brainly.com/question/30703986

#SPJ4

Complete question:

In each case either show that the statement is true, or give an example showing it is false. (a) If a linear system has n variables and m equations, then the augmented matrix has n rows. quations • ( *b) A consistent linear system must have infinitely many solutions. . (c) If a row operation is done to a consistent linear system, the resulting system must be consistent. (d) If a series of row operations on a linear system results in an inconsistent system, the original system is inconsistent.

The solution of the graphs are as follows

first graph

second graph

The graphs consist of two sets of equations plotted, each has shade peculiar to the equation.

The solution of the graph consist of the ordered pair that fall within the parts covered by the two shades

For the first graph by the left, the solutions are

For the second graph by the left, the solutions are

Learn more about inequality graphs at:

https://brainly.com/question/24372553

#SPJ1

Answer: the distribution to the x and the 3 makes the solution 4

Step-by-step explanation: i got you broski

Answer:16

Step-by-step explanation:

average is similar to mean

you get the Total value and divide it with the number of values added

The process to show that if 16 people are seated in a row of 20 chairs, then some group of 4 consecutive chairs must be occupied is shown below.

We prove this using the Pigeonhole Principle, which states that if n items are placed into m containers, and n > m, then at least one container must contain more than one item.

Let us consider the 16 people seated in a row of 20 chairs. Each person occupies one chair, so there are 20 - 16 = 4 empty chairs in the row.

We assume that empty chairs as containers, and people as items that need to be placed into containers.

Since there are more items (people) than containers (empty chairs), there must be at least one group of 2 or more consecutive empty chairs.

Now, let's consider the complement of this statement: Suppose there are no groups of 4 consecutive chairs that are occupied. Then, each group of 4 consecutive chairs contains at most 3 people.

We partition the row of chairs into groups of 4 consecutive chairs.

So, there are 20 - 3 = 17 such groups. By the statement above, each of these groups contains at most 3 people. Therefore, the total number of people seated in the row is at most 17×3 = 51.

But, we know that there are actually 16 people seated in the row. This is a contradiction, since 51 < 16. Therefore, our assumption that there are no groups of 4 consecutive chairs that are occupied must be false, and we have proved that some group of 4 consecutive chairs must be occupied.

Learn more about Pigeonhole Principle here

https://brainly.com/question/30322724

#SPJ4

To rewrite a number with a radical in the denominator without the radical, we can use the conjugate of the denominator. The conjugate of a binomial expression a + b is a - b, and the conjugate of a - b is a + b.

Suppose we have a number with a radical in the denominator, such as 1/√2. To rewrite this without the radical, we multiply the numerator and denominator by the conjugate of the denominator, which is

√2: 1/√2 = (1/√2) * (√2/√2) = √2/2

Note that the product of the denominator and its conjugate is always a difference of squares, which can be simplified to an integer without a radical.

To know more about denominator, here

brainly.com/question/7067665

#SPJ4

Answer:

57

Step-by-step explanation:

Okay, So we have this person That has 81% average before the quiz. For a course That score includes everything, but the final, which counts for 25% of the course grade, was the best course grade you your friend can earn. Okay, The best course grade given to me makes me. Mhm. 100. So we have .81 times. Actually we'll keep this as 81, times .75 right Plus 100 times. Excuse ME, Time 0.25. This is equivalent to 81 times 0.75. Mhm. This is equivalent to 81 times .75 plus 100 times 0.25, Which equals 85.75%. Now that's for part one. Report to we have what is the minimum score? Turn to 75%. So we have 75 equal to 81 times 0.75 Plus X. Times zero 25. So 81 times 0.75 equals 60.75 75- is value mhm. Is equal to 14.25. So we have 0.25 x. And if we divide 14.25 over 0.25, we isolate X. So the minimum score to get a 75 is a 57

The margin of error in a confidence interval for the population mean includes the standard error of the sample mean and the z or t value associated with a certain level of confidence, usually 95% or 99%. Therefore, the correct answer is (C).

Sampling bias and nonresponse bias are potential sources of error in survey or study design and data collection, but they are not directly related to the construction of a confidence interval.

The desired level of confidence is a key input for determining the z or t value used in the calculation of the margin of error, but it is not included in the margin of error itself. The correct answer is  z or t value associated with a 95% confidence level.

So, the correct option is (C).

To know more about confidence interval:

https://brainly.com/question/24131141

#SPJ4

a) The expression for the stable fixed point is P* = (1 + sqrt(1 - 4h)) / 2

b) There exists a fixed point for all values of h less than or equal to 1/4.

The fixed points of the model are the values of P at which dP/dt = 0. Therefore, we need to solve the equation

P(1-P) - h = 0

Expanding the left-hand side, we get

P - P^2 - h = 0

Rearranging, we get a quadratic equation

P^2 - P + h = 0

Using the quadratic formula, the two solutions for P are

P = (1 ± sqrt(1 - 4h)) / 2

a) The larger root is the stable fixed point, as it corresponds to a minimum of the fish population growth function. Therefore, the expression for the stable fixed point is

P* = (1 + sqrt(1 - 4h)) / 2

b) For the model to have a fixed point, the quadratic equation must have real roots. This occurs when the discriminant (the expression inside the square root) is non-negative

1 - 4h ≥ 0

Solving for h, we get

h ≤ 1/4

Learn more about quadratic equation here

brainly.com/question/30098550

#SPJ4

The given question is incomplete, the complete question is:

This problem explores some questions regarding the fishery model

dP/dt =P(1−P)−h

If you have not yet run the Jupyter notebook please do so now. Find analytical expressions for the two fixed points of the model, in terms of h

a) Give an expression for the stable fixed point. You may assume that the larger fixed point is the stable one. b) For what values of h does there exist a fixed point?

The interest earned on GH 2500 at 5% p.a. for 4 years is GH 500.
The principal that gains an interest of GH 2590 in 5 years at 7% per annum is approximately GH 7400.

What is simple interest ?

Simple interest is a type of interest that is calculated on the principal amount of a loan or investment at a fixed rate for a specified period of time. It is based only on the principal amount, and does not take into account any interest earned on previous periods.

The formula for simple interest is:

I = P * R * T

where:

According to the question:
a) Using the simple interest formula, we have:

I = (P * R * T) / 100

Substituting P = GH 2500, R = 5%, and T = 4 years, we get:

I = (2500 * 5 * 4) / 100 = 500

Therefore, the interest earned on GH 2500 at 5% p.a. for 4 years is GH 500.

b) Using the same formula, we can solve for the principal P:

I = (P * R * T) / 100

2590 = (P * 7 * 5) / 100

2590 = (35P) / 100

35P = 2590 * 100

P = (2590 * 100) / 35

P ≈ GH 7400

Therefore, the principal that gains an interest of GH 2590 in 5 years at 7% per annum is approximately GH 7400.

To know more about Simple interest visit:
https://brainly.com/question/20406888
#SPJ1

a) The value of Hy = 1.15

b) The proportion of cartons with less than 1.15 broken eggs is 0.60

c) The answer is B)This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like.

(a) Hy = 0.67, which means that on average, there are 0.67 broken eggs per carton.

Hy = (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1

= 0.67

(b) The proportion of cartons with less than 0.67 broken eggs is 0.60 which is probability of 0 broken eggs.. This may be surprising as the probability of having less than 0.67 broken eggs is only 0.60, but this is due to the fact that the distribution is skewed towards higher values.

(c) Hy is not equal to the simple average of 0, 1, 2, 3, and 4 because the distribution is not symmetrical. The probabilities are weighted towards higher values, which increases the mean. Additionally, the value of zero should be included in the calculation, as it represents a possible outcome. Therefore, the correct formula for Hy is (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1 = 0.67.

To know more on symmetrical distribution

https://brainly.com/question/31184447

#SPJ4

--The question is incomplete, answering to the question below--

"Let y denote the number of broken eggs in a randomly selected carton of one dozen eggs.

y 0 1 2 3 4

p(y) 0.60 0.20 0.15 0.03 0.02

(a) Calculate and interpret Hy  

(b) In the long run, for what proportion of cartons is the number of broken eggs less than Hy? (Round your answer to two decimal places).

Does this surprise you?

Yes

No

(c) Explain why Hy is not equal to (0 + 1 + 2 + 3 + 4)/5 = 2.0.  

A. This computation of the mean is incorrect because the value in the denominator should equal the maximum y value.

B. This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like

C. This computation of the mean is incorrect because it includes zero in the numerator which should not be taken into account when

D. This computation of the mean is incorrect because it does not take into account the number of partially broken eggs."

In a diagram,

Then,

[tex]\dfrac{DE}{BC}=n[/tex]

For example, suppose that n=2; thus,

[tex]DE=2BC\longrightarrow2\times CA[/tex]

We can form a new triangle DEF whose side EF is parallel to CA; therefore,

[tex]\longrightarrow EF=2CA[/tex]