Answer:
A. Move the buret clamp to a ring stand with a larger base.
Explanation:
The ring stands are used to hold burettes, light in weight to avoid loss of stability, that is why it is necessary to change the size of the ring stand so that it can support the buret that we are going to use. It is not recommended to balance it with the hand since it would give us an inaccurate result in the titration.
In order to stabilize the set-up, one has to move the buret clamp to a ring stand with a larger base.
The ring stand or the retort stand simply means an equipment that is used in supporting other equipment and glassware such as test tubes, flasks and burettes.In this case, since the the set-up is tippy and unstable, then it's possible that the ring size doesn't fit and one will need to move the buret clamp to a ring stand that has a larger base.In conclusion, the correct option is A.
Read related link on:
https://brainly.com/question/15291481
Cuando se queman combustibles que tienen algún compuesto de azufre se produce dióxido de azufre (SO2), un gas irritante que puede provocar lluvia ácida. En el análisis del aire de una ciudad se ha encontrado una concentración de SO2 de 14 mg/m^3 ¿Qué cantidad de SO2 habrá en 1 L de aire?
Answer:
See answer below
Explanation:
I have to answer this question in english because is the rule here. I hope you can understand this.
Now, in order to answer this, is really easy. We already have the quantity of SO₂ in the air of a city. This concentration is 14 mg/m³, so we want to know the quantity in 1 L. This quantity can be expressed in mass.
If concentration according to the units is: mg/m³ This means that we have units of mass and volume. So, in order to know the quantity of SO₂ in mass, we need to convert the units of volume m³ to liter.
1 m³ is covered in 1000 L, therefore:
14 mg/m³ * 1 m³/1000 L = 0.014 mg/L
Then, the mass will be:
m = 0.014 mg/L * 1 L
m = 0.014 mg of SO₂
This is the quantity of SO₂ in 1 L.
Could somebody answer these questions for me? Thanks!
1. What percentage of the earth is covered by water?
2. What sorts of signals does the brain use to communicate sensations, thoughts and actions?
3. Did dinosaurs and humans ever exist at the same time?
4. What is Darwin's theory of the origin of species?
5. Why does a year consist of 365 days and a day of 24 hours?
Explanation:
1) %70 earth is water and %30 is land.
2)" The single cells in the brain communicatethrough electrical and chemical signals.
3) b'coz earth revolve around the sun in365 days and rotates on its axis in 24 hours. It takes 365 days , because it takes that much time to complete one revolution and it takes 24 hours,because it takes time to complete one rotation as mercury takes 81 earthdays to complete one revolution.
4) Human originated from Adam And Eve.
Which phrase provides the best definition of mass movement?
the movement of material caused by erosion
the slow flow of a glacier as it moves through the valley of a mountain
the movement of large amounts of soil and rock debris down a slope
the fast movement of a boulder rolling down a slope
Answer:
the movement of large amounts of soil and rock debris down a slope
Explanation:
yeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeetyeet
10 mL of 6 M HCL are diluted to 1 L with distilled water. What is the molarity of the dilute solution?
Answer:
The correct answer is 0.06 M
Explanation:
The concentration of the dilute solution (Cd= dilute concentration) can be calculated from the concentrated solution (Cc) and the volumes (Vi and Vf) as follows:
Cc x Vc = Cd x Vd
Cd = (Cc x Vc)/Vd
We have:
Cc= 6 M
Vc = 10 ml (volume of concentrated solution)
Vd= 1 L= 1000 ml (volume of dilute solution)
⇒Cd= (6 M x 10 ml)/1000 ml
Cd = 0.06 M
why do we see only one side of the moon from earth?
Answer:
The moon's period of rotation and revolution are equal
Which of the following is stored in the skeletal system?
A. potassium
B. calcium
phosphorous
D. sodium
Answer:
b calcium
Explanation:
How many moles of NaCl are contained in 100.0ml of a 0.20m solution
AgCl is..
A)an element
B)a compound
C.)a mixture
Answer:
(B)
Explanation:
Silver chloride is a simple ionic compound consisting of the silver cation (Ag+) and chloride anion (Cl-).
How do I solve this? Please help.
How much heat is required to raise the temperature of 179g of acetic acid, CH3COOH, from 250C to 82.70C?
Answer: The heat required to raise the temperature of 179 g of acetic acid, is 21000 Joules
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=m\times c\times \Delta T[/tex]
Q = Heat absorbed = ?
m = mass of acetic acid = 179 g
c = heat capacity of acetic acid = [tex]2.043J/g^0C[/tex]
Initial temperature = [tex]T_i[/tex] = [tex]25^0C[/tex]
Final temperature = [tex]T_f[/tex] = [tex]82.7^0C[/tex]
Change in temperature ,[tex]\Delta T=T_f-T_i=(82.7-25)^0C=57.7^0C[/tex]
Putting in the values, we get:
[tex]Q=179g\times 2.043J/g^0C\times 57.7^0C=21100J[/tex]
Thus heat required to raise the temperature of 179 g of acetic acid, is 21000 Joules
A sample of water is heated from 10.0 degrees Celcius to 15.0 degrees Celcius by the addition of 125 Joules of heat. What is the mass of the water?
Answer:
125 = 5*4.186*m
m = 125 / 5*4.186 = 5.97g of water.
Explanation:
The water is increased by 5 degrees. This means that for every gram of water, it takes 5*4.186 J to increase the temperature by 5 degrees, aka 5*4.186 J/g
hope this help:)
what is radium used for
Answer:
Radium is used to produce Radon
Explanation:
Radon is a gas used to treat cancer (certain types).
A sample of carbon dioxide occupies a volume of 1.50L at 165KPå pressure. What pressure would the gas exert if the volume was increased to
2.5L?
a.0.023 kPa
b. 275 kPa
c. 99 L
d. 99 kPa
Answer:
B. 275 kPa
Explanation:
Since we need to find the greater value, because 1.50<2.5, then the only greater value would be 275 kPa.
During light-dependent reactions, carbon dioxide is converted to glucose.
Group of answer choices
True
False
Answer:The light-independent reactions use the ATP and NADPH from the light-dependent reactions to reduce carbon dioxide and convert the energy to the chemical bond energy in carbohydrates such as glucose.
Explanation:step-by-step
Answer:
FALSE
Explanation:
I just took the test and put true and it was wrong so it's false. Hope this helps and please mark brainliest!
Which statement best describes the difference between nuclear fission and nuclear fusion reactions?
Answer:
They are both nuclear reactions that produce energy.
Fission is the splitting of heavy, unstable nucleus into two lighter nuclei.Fusion is the process where two light nuclei combine together (this process releases a vast amount of energy)* I’ll give you BRAINLIST * ( have to get it right ) Joshua has learned that the human body is made up of many body systems that work together to function for life. Which of the following does NOT
provide an example of two human body systems working together?
Answer:
Kidney & lungs
heart & bladder
bladder & lungs
Explanation:
HOPE THIS HELPS
Which question can be asked to determine if a wave is electromagnetic or mechanical
Answer: The Answer is
Does it require medium to travel
Explanation:
Answer:
does it require a medium
Explanation:
trust me
Which of the following human activities can increase the risks of flooding?
deforestation i hope this helps
Answer:
Deforestation and Cultivation
Explanation:
First I am going to give the definition of deforestation:
Deforestation is basically the removal of trees.
The removal of trees leaves leaves very little vegetative cover to hold heavy rain fall. This is why mudslides and things happen. When the land is clear and flat, the water keeps on going instead of going into the soil. That water that keeps on going is called runoff water. If we planted trees by the rivers, that could take down the height of the floods in towns by 20%
At first I was going to say widening rivers, but that is a way to manage river water. When we lengthen the river, it is so that the water can take more time to reach the river canal.
Definition of Cultivation: The production of food by preparing the land to grow crops (especially on a large scale) animal husbandry - breeding and caring for farm animals. agriculture, tree farming - the cultivation of tree for the production of timber.
I was also going to say Cultivation. Over-cultivation is the excessive use of farmland to the point where productivity falls due to soil exhaustion or land degradation. Now this is actually why we have floods in the USA. The soil cannot soak up any water, therefore the water over flows and that is when a flood starts to happen.
I know this took some time but hope I could help :)
Temperature and volume are
_____ related, which means as temperature______
the volume decreases.
Answer:
They are directly related.
Temp decrease then volume decrease
Temp increase then volume increase
Explain why matter takes space
can someone Fing answer this PLEASE! NOW
Chemical Reactions Performance Task
Description: A student conducted two different demonstrations in their science class that started with copper chloride (CuCl₂). They have provided you with the following data tables to help you determine if a physical change or chemical reaction occurred during the demonstrations.
Demonstration 1:
Reactants
substances at beginning of reaction
Products
substances at the end of the reaction
Substance
(Chemical Formula)
Copper Chloride
(CuCl₂)
Water
(H₂O)
Copper Chloride
(CuCl₂)
Water
(H₂O)
Properties
Density: 2.51 g/cm³
Melting Point: 100ºC
Boiling Point: 993ºC
Density: 1 g/cm³
Melting Point: 0ºC
Boiling Point: 100ºC
Density: 2.51 g/cm³
Melting Point: 100ºC
Boiling Point: 993ºC
Density: 1 g/cm³
Melting Point: 0ºC
Boiling Point: 100ºC
Based on the patterns (similarities and differences) in the properties of the reactants and products in the table above, is this a physical or chemical reaction? Cite specific evidence from multiple properties in the data table to support your answer. (5pts)
Claim
Evidence
Reasoning
Demonstration 2:
Reactants
substances at beginning of reaction
Products
substances at the end of the reaction
Substance
(Chemical Formula)
Copper Chloride
(CuCl₂)
Iron
(Fe)
Iron Chloride
(FeCl₂)
Copper
(Cu)
Properties
Density: 2.51 g/cm³
Melting Point: 100ºC
Boiling Point: 993ºC
Density: 7.86 g/cm³
Melting Point: 1538ºC
Boiling Point: 2682ºC
Density: 3.16 g/cm³
Melting Point: 677ºC
Boiling Point: 1023ºC
Density: 8.96 g/cm³
Melting Point: 1085ºC
Boiling Point: 2562ºC
Based on the patterns (similarities and differences) in the properties of the reactants and products in the table above, is this a physical or chemical reaction? Cite specific evidence from multiple properties in the table to support your answer. (5pts)
Claim
Evidence
Reasoning
Using the data from Demonstrations 1 and 2, fill out the table below to describe the difference between a physical and chemical reaction in terms of the rearrangement and/or conservation of atoms and molecules. Choose conserved or not conserved for atoms. Choose rearranged or not rearranged for molecules. (4pts)
Physical Changes
Chemical Reactions
Atoms:
(conserved/not conserved)
Molecules
(Rearranged/Not rearranged)
Answer:
Need to broken down more.
Explanation:
Answer:
its FIND NOT fing
Explanation:
An example of a double replacement chemical reaction takes place in batteries. In an alkaline battery, Manganese oxide reacts with water to form a different manganese oxide and hydroxide. Which is the correct balanced equation for this?
Answer:
2MnO2 + H2O => Mn2O3 + 2OH is the correct balanced equation.
When manganese oxide reacts with water to form a different manganese oxide and hydroxide, the correct balanced equation for this is 2MnO₂ + H₂O ⇾ Mn₂O₃ + 2OH.
What do you mean by balanced chemical equation ?The term balance chemical equation is define as the equation which satisfy the law of conservation of mass, i.e., “Total mass of the products is equal to the total mass of all the reactants”.
If a chemical equation is not balanced, it will break the law of conservation of mass. It will indicate that either mass is created or destroyed, which is impossible.
Balanced chemical equations have the equal number and type of each atom on both sides of the equation.
Thus, When manganese oxide reacts with water to produce a different manganese oxide and hydroxide, the correct balanced equation for this reaction is 2MnO₂ + H₂O ⇾ Mn₂O₃ + 2OH.
To learn more about the balanced chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
HELP MEHHHHH were does the first stage of cellular respiration occur ?
Answer:
mitochondria
Explanation:
Cellular respiration occurs primarily in the mitochondria of your cells. The mitochondria is like the powerhouse of cells .
when does thermal energy stop moving
Answer:
at absolute zero.
Explanation:
absolute zero or 0 kelvin, is where all kinetic movement of electrons ceases in a molecule.
Sam used 38 quarts of paint for the outside of the barn and he used 26 quarts for the inside of the barn. How many gallons of paint did sam use to paint the entire barn?
Answer:
Sam used 16 gallons of paint to paint the entire barn.
Explanation:
1 quart = 0.25 of gallon
38 + 26 = 64
64 / 0.25 = 16
16 gallons.
Dr. Michelle Wang at Cornell University studies DNA replication and protein synthesis. Her group researches how a protein called helicase unzips the DNA strand.
After DNA is unzipped, what is the next step in DNA replication?
A. Messenger RNA forms along the exposed DNA bases.
B. A chromosome with two identical strands of DNA is formed.
C. Nitrogen bases pair up with the DNA strands.
D. Ribosomes attach to DNA and move along the strand.
Answer:
C. Nitrogen bases pair up with the DNA strands.
Explanation:
The correct option would be that nitrogen bases pair up with DNA strands.
DNA replication is a process during which a DNA molecule makes a copy of itself. It represents one of the major processes of gene expression.
DNA replication happens in several steps and it involves several important enzymes: The steps can be summarized in chronological order as follows:
The double helix structure of the DNA is first unwound using a helicase enzyme.A short RNA sequence known as primer binds to each DNA strand. Binding is done at a single site on the leading strand while it is done at multiple sites on the lagging strand.An enzyme known as DNA polymerase then elongates the primers by adding nucleotide bases to grow new strands.Once elongation is complete, the primer disengage and the RNA nucleotide bases are replaced DNA equivalence, the okazaki fragments of the lagging strands is joined by a ligase, the nely synthesized strands are proofread and each strand winds up to their respective parent strand.Hence, the correct option would be that nitrogen bases pair up with the DNA strand.
Correct option: C.
what is the mass of 7.525 x10^24 particles of sulfur difluoride SF2?
Answer:
Mass will be equal to 874.56 gram
Explanation:
Molar mass of sulfur = 32 u
Molar mass of Florine = 19 u
Therefore molar mass of [tex]SF_2[/tex] [tex]=32+2\times 19=70u[/tex]
So mass of [tex]6.023\times 10^{23}[/tex] particle is 70 gram
Therefore mass of 1 particle
[tex]=\frac{70}{6.023\times 10^{23}}=11.62\times 10^{-23}g[/tex]
Therefore mass of [tex]7.525\times 10^{24}[/tex] particle is
[tex]7.525\times 10^{24}\times 11.62\times 10^{-23}=874.56gram[/tex]
Does anyone know how to solve this
Answer:
Beta
Explanation:
Beta has signal 0 above and -1 under
which term names a small icy object that orbits the sun?
Answer:
It a comet
Explanation:
that why they are also called dirty snowballs
Answer:
A comment
Explanation:
Because I took the test and that 100 and because comets are icy and sometimes lead tale of water droplets behind them
In the following reaction 6.13g of water (H,O) is produced the theoretical
yield of water (H,O) is 8.17g, what is the percent yield of water?*
C3H8+ 5 O2 → 3 CO2 + 4 H2O
85.0%
72.0%
75.0%
0 67.0%
A chemistry student mixes 25 milliliters of 3.0 M hydrochloric acid (HCl) with excess sodium hydroxide. The chemicals react according to this chemical equation:
HCl + NaOH → NaCl + H2O.
If the volume of the resulting solution is 68 milliliters, what is the concentration of sodium chloride?
Answer:
1.1 mol/liter
Explanation:
You would use the M1V1 = M2V2 equation to solve this.
We know M1 is 3.0 M, V1 is 25 milliliters, and V2 is 68 milliliters. We need to find M2.
To find M2, first plug in what you know.
(3.0 M)(25 mL) = M2(68 mL)
Then, divide everything by 68 mL to get M2 by itself
Your answer should be a quite large decimal but I rounded it to 1.1 mol/liter.
Answer:
The concentration of sodium chloride is 1.1 moles/liter.
Explanation:
