Answer:
1. a body of air with horizontally uniform temperature, humidity, and pressure.
2. Boundaries between unlike air masses. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.
3. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.
4. Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot.
5. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry. One that forms over the Indian Ocean is called a maritime tropical air mass and is warm and humid.
6. an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.
7. Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning.
8. stormy
9. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass.
10. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass
11. Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.
12. At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.
13. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.
14.An occluded front is a combination of those two signs. They are indicated on a weather map either by a purple line with alternating semicircles and triangles pointing in direction of travel, or by red semicircles and blue triangles pointing in the same direction.
Explanation:
:)
Answer:
Heya
Explanation:
1) air mass:- An air mass is a large volume of air in the atmosphere that is mostly uniform in temperature and moisture.
2) Air masses are characterized by their temperature and humidity properties.
3) ( same answer i.e. temperature and humidity properties).
4) Colder air masses are termed polar or arctic, while warmer air masses are deemed tropical. Continental and superior air masses are dry while maritime and monsoon air masses are moist. Weather fronts separate air masses with different density (temperature or moisture) characteristics.
5) Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot. Arctic air masses are extremely cold.
6) Maritime air masses form over water and are humid. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.
7) Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning. Lifted warm air ahead of the front produces cumulus or cumulonimbus clouds and thunderstorms.
8) Warm fronts often bring stormy weather as the warm air mass at the surface rises above the cool air mass, making clouds and storms. Warm fronts move more slowly than cold fronts because it is more difficult for the warm air to push the cold, dense air across the Earth's surface.
9) The symbol that is used to identify a warm front on a weather map is a red line with half circles that point in the direction in which the warm front is moving. The line represents the leading edge of the warmer air mass.
10) On weather maps, the surface position of the cold front is marked with the symbol of a blue line of triangles/spikes (pips) pointing in the direction of travel.
11) Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.
12)At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.
13) The warm air mass rises as the cool air masses push and meet in the middle. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.
14)Occluded fronts are drawn as a solid purple line with half circles and triangles pointing in the direction that the front is moving. An occluded front usually brings dry air.
[tex] \underline \blue{ \fbox{check \: the \: attachment \: too \: :) }}[/tex]
Using the diagram, which two planes would intersect in HG?
Answer please .. :)
Answer:
I think D
Explanation:
it has both H and G in the planes.
1 point
have specific requirements that need to be met in order for an
entrepreneur to be considered.
O Loans
O Investments
O None of the other answers
O Grants
Plz answer question! Due in 7 minutes!!! Will make BRAINLIEST for first correct answer!!!
Which method can be used to calculate the percentage composition of a
compound?
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Help quickly pleaaas
Answer:
chymotrypsin, cleaves peptide bonds selectively on the carboxylterminal side of the large hydrophobic amino acids such as tryptophan, tyrosine, phenylalanine, and methionine
Under certain conditions butane reacts with oxygen to form butanone which can be easily hydrogenated to butanol. Butene is easily made from butanol by elimination of water.
Explanation:
These are for the first too
Consider the following reaction occurring in a 1.0 L container:
H2 (g) + I2 (g) → 2 HI (g)
State 2 requirements for a successful collision between H2 and I2.
Answer:
jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw
Organisms are classified into different kingdoms based on?...
Answer:
Food and cell type
Explanation:
Kingdoms are by far the most basic legal structure for living objects. Living objects are classified into realms depending on how they consume food, the kinds of cells that produce their bodies, and the total type of tissue in their bodies.
classify the following elements under metals, non metals and metalloids, boron, zinc Mercury, silicon, oxygen, nitrogen, sodium
Answer:
Zinc mercury transition metal
Silicon boron metalloid
Oxygen nitrogen non metal
Sodium alkali metal
Explanation:
3. Describe the process behind how students recover an individual's remains from a surface grave.
Answer:
By using the techniques of archeology.
Explanation:
Students recover an individual's remains from a surface grave by using the techniques of archeology field to scrape away the layers of soil from that remains in a way that the remains can't be damaged. If they find the remains within 10 centimeters of digging, they can dig down further in order to dig out all the remains safely. The instruments of archeology field are used because they are light and can be used to dig out fossils of ancient organisms.
help meeeeeeeeeeeeee
Answer:
XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl
The coefficients are: 1, 2, 1, 2
Explanation:
XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl
The equation can be balance as follow:
XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl
There are 2 atoms of Cl on the left side and 1 atom on the right side. It can be balance by writing 2 before AgCl as shown below:
XCl₂ + AgNO₃ —> X(NO₃)₂ + 2AgCl
There are 2 atoms of Ag on the right side and 1 atom on the left side. It can be balance by writing 2 before AgNO₃ as shown below:
XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl
Now, the equation is balanced.
The coefficients are: 1, 2, 1, 2
help, please? What science law explains why there should always be the same type of elements on the reactant side as there are on the product side? What does this law state? (HINT: Answer both of these questions. A: The Law of _________________ states that _____________.)
Answer:
the law of conservation of energy states that energy neither created nor destroyed that means in a chemical reaction Mass reactants ( starting material)=tomass of produt
True or False. Chemical changes only rearrange the elements that are
already present.
True or False. The reactants and the products of a chemical equation
always have the same number of atoms.
Here's link to the answer:
tinyurl.com/wpazsebu
MgSO4 x 7H2O:
How
many molecules of
water are present
per magnesium
sulphate formulation
unit
Answer:In regards to writing the formula, we know that magnesium has a charge of 1+ and sulfate, SO4, has a charge of 1-. Sulfate is a polyatomic ion so the charge of the whole thing is (SO4)1-. When you combine them you end up with MgSO4 and the "heptahydrate" is seven water molecules.
Explanation:
Answer:
Iduno sorry po hsjsnaka
Why would the presence of oxygen bubbles be a good indicator of photosynthesis occurring?
kdjsbjsof in bwjfiejwnjfifihdhwhbsd
Many ski resorts and mountain cities can be reached directly by planes which deposit travelers a mile or more above sea level. This can result in altitude sickness due to hypoxemia, or reduced oxygen in the blood, caused by the unaccustomed exposure to the lower atmospheric pressure at high elevations. On a given day, the prevailing atmospheric pressure in Albuquerque, NM (elevation 1620 meters) might be 0.799 atm. Calculate this pressure expressed in mmHg and in torr. Relationship between altitude and barometric pressure.
Answer:
See explanation
Explanation:
To convert from atm to mmHg
1 atm = 760 mmHg
0.799 atm = 0.799 atm * 760 mmHg/1 atm = 607.24 mmHg
To convert from atm to torr
1 atm = 760 torr
0.799 atm = 0.799 atm * 760 torr/1 atm = 607.24 torr
Which of the following is a neutralization reaction?
a
SiCl4 + 4 H2O → H4SiO4 + 4 HC
b
HCl + NaOH → NaCl + H2O
c
6 CO2 + 6 H2O → C6H12O6 + 6 O2
d
2Al + 6HCl → 2AlCl3 + 3H2
Answer:
B
Explanation:
B, Hcl + NaoH = NaCl + H2O
What is needed to change a phase of matter?
The addition or subtraction of thermal energy. For example if you heat up an ice cube, it will melt to become water. If you heat it even more, it will evaporate.
Which of the nine substances are made of four elements?
Answer:
Oxygen mucury carbon dioxide and platinum
Explanation:
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
Crossing a Dd parent with another Dd parent results in
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
Why is it important to know characteristics that matter undergoes in chemistry? How can we analyze the relationships between chemical and physical changes and properties?
Extension Questions: What is the study of Chemistry? Who are some of the important people who have contributed to the field? How do regular Americans interact with Chemistry around them?
How can we understand the historical development of the Periodic Table and apply its predictive power?
Extension Questions: Describe different chemical principles and systems. How does the layout of the periodic table allow you predict other element's properties? Consider all types and groups of elements.
Why is it important to know and understand the historical development of atomic theory?
Extension Questions: How does the atom relate to the elements of the periodic table? What are your most common models and how do they relate to the current atomic model? What theories don’t hold true today if any?
How do atoms combine to form ionic, covalent, and metallic bonds?
How can we write and balance chemical equations using the law of conservation of mass?
Answer:
Chemistry is important because everything you do is chemistry! Even your body is made of chemicals. Chemical reactions occur when you breathe, eat, or just sit there reading. All matter is made of chemicals, so the importance of chemistry is that it's the study of everything.
How many grams of water should be added to 4.00 g NaOH to create 2.00% by mass NaOH solution?
Answer:
196 grams
because ^^^ was wrong and person in comments said it was 196 and it was right
When NaOH of 4.00 g is being added with water, the mass of water required to create 2.00% of NaOH solution by mass is 196 g.
What is mass percent of solute?It means that the particular amount of solute in terms of percentage is present in the solute.
Given the mass of the solute, NaOH is 4.00g
Suppose the mass of water required to add is x in g.
The mass percent of the solute is
[tex]\dfrac{2}{100} =\dfrac{4.00}{4.00 +x }[/tex]
x =196 g
Therefore, mass of water required to create 2.00% of NaOH solution by mass is 196 g.
Learn more about Mass percent of solute.
https://brainly.com/question/15136748
#SPJ2
What are the three major categories used to classify elements?
a Solids, liquids, gases
b Protons, neutrons, electrons
c Groups, periods, states
d Metals. non-metals, metalloids
Answer:
i think option no. " D " = " metals, non-metals, metalloids " is the correct answer.
hope this answer will help u.
have a great time
Which statement is true about solids?
Their particles can flow over one another, so they have a fixed volume but no fixed shape.
Their motionless particles are packed together in a fixed arrangement.
Their vibrating particles are packed together in relatively fixed positions.
Their fast-moving particles can expand to take the shape of their container.
Answer:
3
Explanation:
Answer:
Their vibrating particles are packed together in relatively fixed positions.
Explanation:
As you can see in the image below, solid is packed together.
Does a animal cell have cytolysis?
Answer:
The presence of a cell wall prevents the membrane from bursting,so cytolysis only occurs in animal and protozoa cells which do not have cell walls.
Explanation:
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
What is the molarity of 6.2 moles of NaCl in 2.5 L of water?
Full work plz
Molarity= no. of moles of solute/ volume of solution(in L)
Molarity = 6.2 moles/ 2.5 L = 62/25 mol/L
= 2.48 mol/L
Circle all that apply for an anion.
a. Positively charged
b. Negatively charged
c. Metal
d. Nonmetal
e. Loses electrons when formed
f. Gains electrons when formed
g. Listed first in a compound
h. Listed second in a compound
Answer:
b. d. f. h
Explanation:
Anions are negatively charged. They are usually non metals with few exceptions. They need to gain electrons in order to form and they are always listed after cation in a compound.
is zinc an example of a metal or nonmetal?
Answer:
*Metal= iron, copper, aluminium, lead, Mercury, zinc, chromium, Nickel, gold, silver, Platinum. *Non-metal= sulphur, oxygen, nitrogen, Phosphorus, hydrogen, chlorine, Silicon, Iodine.
Explanation:
Answer:
Metal!!!
Explanation:
Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a blue-silvery appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. Zinc (Zn), chemical element, a low-melting metal of Group 12 (IIb, or zinc group) of the periodic table, that is essential to life and is one of the most widely used metals. Zinc (Zn) is an abundant metal, found in the Earth's crust, with a myriad of industrial and biological uses. ... A base metal, zinc is primarily used to galvanize steel, a process that protects the metal against unwanted corrosion.