Answer:
0.57 mol/L
Explanation:
Molarity (M) is defined as the number of moles of solute per liter of solution (moles/Liter).
Molarity = [tex]\frac{moles of solute}{liters of solution}[/tex] or Moles = molarity × litres
so, the mass of Nacl in 1 mol is 58.44 g,
Moles of NaCl = 50.0g x 1 mole NaCl / 58.44 g
= 0.855 mol NaCl
Moles = molarity × litres
0.855 = 1.5 M x L
L = 0.57 mol/L
Hence, 0.57 mol/L can be prepared from 50.0 g of NaCl.
One of the biggest news stories of 1996 was the successful cloning of Dolly the sheep. Dolly was the first mammal cloned from an adult body cell. At first, Dolly appeared to be perfectly healthy. However, she died at age 6 of cancer. Dolly’s early death made scientists wonder whether cloned animals age faster than normal. A small flock of sheep cloned from Dolly have been observed since 2007. Happily, these clones show no sign of early aging. Choose the best option to complete the sentence. Scientists worried that cloned animals would age rapidly because their cells contain __________________ as old as the individual they were cloned from.
Answer:
I believe the answer you're looking for is DNA, not sure though
Which 1.0 M solution has the lowest pH?
A.
HCN
B.
H3PO4
C.
H2C2O4
D.
HCl
Using the equation below, calculate the approximate moles of oxygen gas (O2) required to completely react with 719.68 moles of aluminum (Al). 4Al (s) + 3O2(g) -----> 2Al2O3(s)
Answer:
539.76 moles of O₂
Explanation:
Equation of reaction:
4Al + 3O₂ → 2Al₂O₃
From the equation of reaction above, 4 moles of Al will react with 3 moles of O₂
We can use mole-concept to find the number of moles of O₂.
4 moles of Al = 3moles of O₂
719.68 moles of Al = x moles of O₂
X = (3 × 719.68) / 4
X = 2159.04 / 4
X = 539.76 moles
539.76 moles of O₂ will react with 719.68 moles of Al
Answer:
[tex]n_{O_2}=959.57molO_2[/tex]
Explanation:
Hello,
In this case, given the reaction:
[tex]4Al (s) + 3O_2(g) \rightarrow 2Al_2O_3(s)[/tex]
Since aluminum and oxygen are in a 4:3 molar ratio, we compute the moles of oxygen that completely react as shown below:
[tex]n_{O_2}=719.68molAl*\frac{3molO_2}{4molAl} \\\\n_{O_2}=959.57molO_2[/tex]
Best regards.
In most mirrors, the virtual image appears to come from behind the mirror. True False
Answer
False
Explanation:
what started the wildfires
Answer:
It is a typical fires that started out of a lightning strike, or people carelessly starting it, or accidentally, or even arson, that went un-noticed and got out of hand.
Answer:
Explanation:
Forest fires always start by one of two ways - naturally caused or human caused. Natural fires are generally started by lightning, with a very small percentage started by spontaneous combustion of dry fuel such as sawdust and leaves. On the other hand, human-caused fires can be due to any number of reasons.
In general, when a substance changes from a solid to a liquid,
A.
the density of the substance increases.
B.
the substance no longer has density since density is a property only solids have.
C.
the density of the substance decreases.
D.
the density of the substance remains the same.
Answer:
c,density is the measure of compactness in a substance. Liquid particles are close together however they aren't as close as the particles in solids.
The pressure of a gas in a cylinder when it is heated to a temperature of 250k is 1.5 atm. What was the initial temperature of the gas if it’s initial pressure was 1 atm?
Answer:
[tex]T1=166.66K[/tex]
Explanation:
According to Gay-Lussac’s law simply states that the ratio of the initial pressure and temperature is equal to the ratio of the final pressure and temperature for a gas of a fixed provided that the mass is kept at a constant volume.
Given:
Initial pressure, P1 = 1 atm
Final pressure, P2 = 1.5 atm
Final temperature, T2 = 250 K
The law can be applied using the below formula
P1T2 = P2T1
Then,
T1 = (P1T2)/P1 = (1*250)/(1.5) = 166.66 Kelvin.
[tex]T1=166.66K[/tex]
:
Answer:
[tex]T_1=166.7K[/tex]
Explanation:
Hello,
In this case, by applying the Gay-Lussac's law which help us to understand the pressure-temperature gas behavior via a directly proportional relationship:
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
In such a way, as we are asked to compute the initial temperature knowing the initial pressure and final both temperature and pressure, so we solve for it:
[tex]T_1=\frac{T_2P_1}{P_2}=\frac{250K*1atm}{1.5atm} \\\\T_1=166.7K[/tex]
Best regards.
what is the correct formula for the compound platinum (vi) flouride?
Answer: PtF6
Explanation: is one of seventeen known binary hexafluorides.
Do liquids have higher coefficients of expansion than solids do
Answer: yes they do.
Explanation:
I'm tryna get more points because my other account got blocked for the next 48 hours.
(Don't be mad at me please)
In the graph above for the dissociation of a strong acid, why do the bars for H3O+ and A- have the same height as the bar for HA?
Answer:
The concentration of HA is the same as concentration of H3O+ and A- produced.
Explanation:
The dissociation equation is given below:
HA(aq) + H2O (l) —> H3O+(aq) + A-(aq)
From the reaction above, we can see that the acid is monoprotic acid i.e it has only 1 ionisable hydrogen atom.
Now, from the balanced equation, we can see that the acid produced equal concentration of H3O+ and A-.
This account for the reason why the bars for H3O+ and A- have the same height as the bar for HA.
1.
__________ are the most organized state of matter.
Solids
Liquids
Gases
2.
States of matter change when ________ is added or removed.
Plasma
Energy
3.
Which state of matter has the most movement of its particles?
Solid
Liquid
Gas
Solids are the most organized state of matter. States of matter change when energy is added or removed. Gas is the state of matter has the most movement of its particles.
What are the states of matter?The states of matter are the different forms of the matter in which it can exist. They are solids, liquids and gases. Solids are the states of matter in which molecules are very near to each other. They have fixed shape and volume. Liquids is the states of matter in which molecules are a little far from each other. They have different shape and fixed volume. Gas is the states of matter in which molecules are a very far from each other. They have different shape and different volume.
There are two more states of matter which are called as Plasma, Bose Einstein Condensate.
Plasma have highest energy and Bose Einstein Condensate have lowest energy.
Therefore, Solids are the most organized state of matter. States of matter change when energy is added or removed. Gas is the state of matter has the most movement of its particles.
To learn more about States of matter click:
https://brainly.com/question/29069107
#SPJ3
HELPPPP PLEASEEEE NAME THESE MOLECULES PLEASEEE
Answer:
1. carboxylic acid
2. ether
3. aldehyde
4. ketone
5. amine
6. alcohol
Explanation:
Know the functional groups. If you would like me to teach you them let me know.
- Hope that helps! Please let me know if you need further explanation.
Which correctly defines a basic solution? A. [H+] is not present. B. [H+] is equal to [OH−]. C. [H+] is less than [OH−]. D. [H+] is greater than [OH−].
Answer: A basic solution is defined as a solution which has more hydroxide (OH-) ions than hydronium ions (H+)
In CaSO4, the oxidation number of Ca is
that of S is
and that of O is
Answer: In CaF2, the oxidation number of Ca is +2
, and that of F is -1
. In H2SO4, the oxidation number of H is +1
, that of S is +6
, and that of O is -2
. In CaSO4, the oxidation number of Ca is +2
, that of S is +6
, and that of O is -2
. In HF, the oxidation number of H is +1
, and that of F is -1
Most solutions are ___ solutions.
A heterogeneous
B saturated
C static
D unsaturated
Answer:
the answer is A heterogeneous solutions
Explanation:
Mixtures in two or more phases are heterogeneous mixtures. Examples include ice cubes in a drink, sand and water, and salt and oil. The liquid that is immiscible form heterogeneous mixtures. A good example is a mixture of oil and water.Jun 26, 2019
3 hazards that occur in teaching and learning of science
Which one is it? Please help
Answer:
Chemical properties can be tested without changing the substance
Explanation:
How many carbon and hydrogen atoms are there?
Answer:
13 carbon and 24 hydrogen
Explanation:
There are 24 hydrogen atoms.
There are 13 carbon atoms.
why is the international space station in orbit
Answer:
The ISS provides a location in the relative safety of low Earth orbit to test spacecraft systems that will be required for long-duration missions to the Moon and Mars.
Explanation:
In the water cycle diagram above, which letter represents
groundwater?
Select One:
Q
S
T
R
Answer:t
Explanation:bc
What mass of chromium would be produced from the reaction of 57.0 g of potassium with 199 g of chromium(II) bromide according to the following reaction? 2 K + CrBr2 2 KBr + Cr *
Answer:
38g of Cr
Explanation:
Step 1:
The balanced equation for the reaction:
2K + CrBr2 —> 2KBr + Cr
Step 2:
Determination of the masses of K and CrBr2 that reacted and the mass of Cr produced from the balanced equation.
This is illustrated below:
Molar mass of K = 39g/mol
Mass of K from the balanced equation = 2 x 39 = 78g
Molar Mass of CrBr2 = 52 + (80x2) = 212g
Mass of CrBr2 from the balanced equation = 1 x 212 = 212g
Molar Mass of Cr = 52g/mol
Mass of Cr from the balanced equation = 1 x 52 = 52g
From the balanced equation above,
78g of K reacted with 212g of CrBr2 to produce 52g of Cr.
Step 3:
Determination of the limiting reactant.
This is illustrated below:
From the balanced equation above,
78g of K reacted with 212g of CrBr2.
Therefore, 57g of K will react with = (57 x 212)/78 = 154.92g of CrBr2.
From the above calculation, we can see that a lesser mass (i.e 154.92g) than what was given ( i.e 199g) of CrBr2 is needed to react completely with 57g of K. Therefore, K is the limiting reactant and CrBr2 is the excess reactant.
Step 4:
Determination of the mass of Cr produced by the reaction.
In this case, the limiting reactant will be use because it will give the maximum yield of Cr as all of it is used up in the reaction process. The limiting reactant is K and the mass of Cr produced is obtained as follow:
From the balanced equation above,
78g of K reacted to produce 52g of Cr.
Therefore, 57g of K will produce = (57 x 52)/78 = 38g of Cr.
Therefore, 38g of Cr is produced from the reaction.
46g of a mineral contained 16g copper, 14g iron and 16g sulphur. Calculate the empirical
formula of the mineral.
Answer:
CuFeS2
Explanation:
Calculate the moles of each substance by doing moles= mass/relative atomic mass. you should get 0.25 moles of copper and iron and 0.5 moles of sulfur. Then divide all of those numbers by 0.25 (as its the lowest value) you should get 1 for copper and iron and 2 for sulfur. This represents the ratio that they are in within the mineral.
How many grams of H20 will be formed when 32.0 g H2 reacts with 16.0 g
O2? *
2H2 + O2 + 2H2O
9.00 g
16.0 g
18.0 g
32.0g
Answer:
18.0 g
Explanation:
M(H2) = 2.0 g/mol
32.0g * 1 mol/2 g= 16 mol H2
M(O2) = 32 g/mol
16.0 g * 1mol/32 g= 0.5 mol O2
2H2 + O2 ---> 2H2O
from reaction 2 mol 1 mol
given 16 mol 0.5 mol
We see that O2 is a limiting reactant.
2H2 + O2 +-------> 2H2O
from reaction 1 mol 2 mol
given 0.5 mol x mol
x =(0.5*2)/1= 1 mol H2O
M(H2O)= 18 g/mol
18 g/mol* 1 mol = 18 g H2O
mutations that neither benefit nor harm the organism have (blank) effect on the organisms survival
Answer:
I would say that the mutation has no effect on the organism, as it doesn't help or harm it.
hope this helps :)
Explanation:
Answer:
its a neutral
Explanation:
i did the test
Which term describes this reaction?
A- addition
B- condensation
C- elimination
D- substitution
Answer:
C.
Explanation:
This is a reaction of elimination, because the water was removed and because of it double bond is formed.
If I add water to 100mL of a 0.15M NaOH solution until the final volume is 150mL, what will the molarity of the diluted solution be?
A. 0.100M
B. 1.2M
C. 0.01M
D. 52.8M
Answer : A
0,15 moles of NaOH -------in-------1000ml
x moles of NaOH ---------in-------100ml
x= 0,015 moles of NaOH
final volume =150ml
0,015 moles of NaOH -------in------150ml
x moles of NaOH ------in--------1000ml
x= 0,1 moles of NaOH
What is the oxidation half-reaction for this unbalanced redox equation? cr2o72– + fe2+ → cr3+ + fe3+ cr3+ → cr2o72– cr2o72– → cr3+ fe3+ → fe2+ fe2+ → fe3+?
Answer:
6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e
Explanation:
The balanced oxidation half equation is;
6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e
A redox reaction is actually an acronym for oxidation-reducation reaction. Since the both reactions are complementary, there can't be oxidation without reduction and there can't be reduction without oxidation.
The main characteristic of redox reactions is that electrons are transferred in the process. The number of electrons transferred is usually deduced from the balanced reaction equation. For this reaction, the balanced overall reaction equation is;
Cr2O7^2–(aq) + 6Fe^2+(aq) +14H^+(aq)→ 2Cr^3+(aq) + 6Fe^3+ (aq) + 7H2O(l)
It is clear from the equation above that six electrons were transferred. Thus six Fe^2+ ions lost one electron each in the oxidation half equation as shown in the balanced oxidation half equation above.
PLZZZ HELP CHEM!!!!!!! Easy points!!!!!
Answer:
H+
Explanation:
Answer:
OH-
Explanation:
An Arrhenius base is any species that increases the concentration of
OH
What mass in grams of hydrogen is produced by the reaction of 2.0 g of magnesium? (Make sure to balance the reaction first)
Mg(s) + H2O(1) --> Mg(OH)2(s) + H2 (8)
Answer:
0.164541341 g H2
Explanation:
1) Convert grams to moles by dividing by RMM of Magnesium (24.31g).
2g Mg * (1 mol Mg / 24.31 g Mg) = 0.082270671 mol of Mg
2) Use the balanced equation's ratio of 1 mol Mg: 1 mol H2.
0.082270671 mol of Mg = 0.082270671 mol of H2
3) Convert the mol of H2 back into grams by multiplying by H2's RMM (2 g).
0.082270671 mol of H2 * 2 g H2 = 0.164541341 g H2
* Answer can be rounded to your liking *
How many moles of H2 are needed to produce 18 moles NH3 in the reaction below?
N2 + 3 H2 —> 2 NH3
Answer:
27 moles of H₂
Explanation:
Equation of reaction:
N₂ + 3H₂ → 2NH₃
From the equation of reaction,
3 moles of H₂ is required to produce 2 moles of NH₃
3 moles H₂ = 2 moles of NH₃
X moles of H₂ = 18 moles of NH₃
X = (3 * 18) / 2
X = 27 moles of H₂
27 moles of H₂ is required to produce 18 moles of NH₃
