11mg of cyanide per kilogram of body weight is lethal for 50% of domestic chickens. If a chicken weighs 3kg, how many grams of cyanide would it need to ingest to kill 50% of domestic chickens?

Answers

Answer 1

Answer:

[tex]0.033g[/tex]

Explanation:

Hello,

In this case, since 11 mg per kilogram of body weight has the given lethality, the mg that turn out lethal for a chicken weighting 3 kg is computed by using a rule of three:

[tex]11mg\longrightarrow 1kg\\\\?\ \ \ \ \ \ \longrightarrow 3kg[/tex]

Thus, we obtain:

[tex]?=\frac{3kg*11mg}{1kg}\\ \\?=33mg[/tex]

That in grams is:

[tex]=33mg*\frac{1g}{1000mg} \\\\=0.033g[/tex]

Regards.


Related Questions

Complete and balance the molecular equation for the reaction of aqueous sodium sulfate, Na2SO4, and aqueous barium nitrate, Ba(NO3)2. Include physical states.molecular equation:Na_{2}SO_{4}(aq) + Ba(NO_{3})_{2}(aq) ->Na2SO4(aq)+Ba(NO3)2(aq)⟶Enter the balanced net ionic equation for this reaction. Include physical states.net ionic equation:

Answers

Answer:

1. The balanced molecular equation is given below:

Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + 2NaNO3(aq)

2. The net ionic equation is given below:

SO4^2-(aq) + Ba^2+(aq) —> BaSO4(s)

Explanation:

1. The balanced molecular equation

Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + NaNO3(aq)

The above equation can be balance as follow:

Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + NaNO3(aq)

There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by putting 2 in front of NaNO3 as shown below:

Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + 2NaNO3(aq)

Now, the equation is balanced.

2. The bal net ionic equation.

This can be obtained as follow:

Na2SO4(aq) + Ba(NO3)2(aq) —>

In solution, Na2SO4 and Ba(NO3)2 will dissociate as follow:

Na2SO4(aq) —> 2Na^+(aq) + SO4^2-(aq)

Ba(NO3)2(aq) —> Ba^2+(aq) + 2NO3^-(aq)

Na2SO4(aq) + Ba(NO3)2(aq) —>

2Na^+(aq) + SO4^2-(aq) + Ba^2+(aq) + 2NO3^-(aq) —> BaSO4(s) + 2Na^+(aq) + 2NO3^-(aq)

Cancel the spectator ions i.e Na^+ and NO3^- to obtain the net ionic equation.

SO4^2-(aq) + Ba^2+(aq) —> BaSO4(s)

If 75.4 J of energy is absorbed by 0.25 mol of CCl4 at constant pressure, what is the change in temperature? The specific heat of CCl4 is 0.861 J/g·°C.

Answers

Answer:

ΔT = 2.28°C

Explanation:

Heat, H = 75.4J

Number of moles = 0.25 mol

Specific heat capacity, c = 0.861 J/g·°C

Change in temperature, ΔT = ?

These quantities are related by the following equation;

H = mc ΔT

Mass, m = Number of moles * Molar mass

m = 0.25mol * 153.82 g/mol

m = 38.455g

S back to the equation;

H = mc ΔT

Substituting the values;

75.4 = 38.455 * 0.861 * ΔT

ΔT = 75.4 /  33.11

ΔT = 2.28°C

The change in temperature is 2.28 °C

First, we will determine the mass of CCl₄ absorbed

From the given information,

Number of moles of CCl₄ absorbed = 0.25 mol

Using the formula

Mass = Number of moles × Molar mass

Molar mass of CCl₄ = 153.82 g/mol

∴ Mass of CCl₄ absorbed = 0.25 × 153.82

Mass of CCl₄ absorbed = 38.455 g

Now, using the formula

Q = mcΔT

Where Q is the quantity of heat

m is the mass

c is the specific heat of substance

and ΔT is the change in temperature

From the given information

Q = 75.4 J

c = 0.861 J/g.°C

Putting the parameters into the formula, we get  

75.4 = 38.455 × 0.861 ×ΔT

75.4 = 33.109755 × ΔT

∴ ΔT = 75.4 ÷ 33.109755

ΔT = 2.28 °C

Hence, the change in temperature is 2.28 °C

Learn more here: https://brainly.com/question/13439286

Because of movements at the Mid-Atlantic Ridge, the Atlantic Ocean widens by about 2.5 centimeters each year. Explain which type of plate boundary causes this motion.

Answers

Answer:

A divergent plate boundary  

Explanation:

At a divergent boundary, the plates pull away from each other and generate new crust.

 

Answer:

Because the ocean becomes larger, this is a divergent plate boundary. Divergent plates cause the ocean floor to expand, making the ocean larger.

Explanation:

PLATO ANSWER

What is the concentration of A after 50.7 minutes for the second order reaction A → Products when the initial concentration of A is 0.250 M? (k = 0.117 M⁻¹min⁻¹)

Answers

Answer:

0.101 M

Explanation:

Step 1: Given data

Initial concentration of A ([A]₀): 0.250 MFinal concentration of A ([A]): ?Time (t): 50.7 minRate constant (k): 0.117 M⁻¹.min⁻¹

Step 2: Calculate [A]

For a second-order reaction, we can calculate [A] using the following expression.

1/[A] = 1/[A]₀ + k × t

1/[A] = 1/0.250 M + 0.117 M⁻¹.min⁻¹ × 50.7 min

[A] = 0.101 M

For each bond, show the direction of polarity by selecting the correct partial charges. _________ Si-P _________ _________ Si-Cl _________ _________ Cl-P _________ The most polar bond is _______

Answers

Answer:

Siδ⁺ -- Pδ⁻⁻

Clδ⁻⁻ -- Pδ⁺

Siδ⁺ -- Clδ⁻⁻

Of the mentioned bonds the most polar bond is Si -- Cl

The polarity of the bond primarily relies upon the electronegativity difference between the two atoms that forms the bond. Therefore, if the electronegativity difference between the two atoms that forms the bond is more the bond will be more polar, and if it is less then the bond will be less polar. The electronegativity of the atoms mentioned is Si = 1.8 , P = 2.1 and Cl = 3.00.  

Therefore, the Si - Cl atoms exhibit more electronegativity difference, thus, the Si - Cl bond will be the most polar bond.  

A 100.0-mL sample of 1.00 M NaOH is mixed with 50.0 mL of 1.00 M H2SO4 in a large Styrofoam coffee cup calorimeter fitted with a lid through which a thermometer passes. The acid-base reaction is as follows:
2 NaOH(aq) + H2SO4(aq) → Na2SO4(aq) + 2 H2O(l)
The temperature of each solution before mixing is 22.3 °C. After mixing, the temperature of the solution mixture reaches a maximum temperature of 31.4 °C. Assume the density of the solution mixture is 1.00 g/mL, its specific heat is 4.18 J/g.°C, and no heat is lost to the surroundings. Calculate the enthalpy change, in kj, per mole of H2SO4 in the reaction.
a. +85.6 kJ/mol.
b. -85.6 kJ/mol.
c. +5.71 kJ/mol.
d. -5.71 kJ/mol.
e. -114 kJ/mol.

Answers

Answer:

THE ENTHALPY CHANGE IN KJ/MOLE IS +114 KJ/MOLE.

Explanation:

Heat = mass * specific heat capacity * temperature rise

Total volume = 100 + 50 = 150 mL

Total mass = density * volume

Total mass = 1 * 150 mL = 150 g

So therefore, the heat evolved during the reaction is:

Heat = 150 * 4.18 * ( 31.4 - 22.3)

Heat = 150 * 4.18 * 9.1

Heat = 5705.7 J

Equation for the reaction:

2 NaOH(aq) + H2SO4(aq) → Na2SO4(aq) + 2 H2O(l)  

From the equation, 2 moles of NaOH reacts with 1 mole of H2SO4 to produce 1 mole of Na2SO4 and 2 moles of water

50 mL of 1 M of H2SO4 contains

50 * 1 / 1000 mole of acid

= 0.05 mole of acid

The production of 1 mole of water evolved 5705.7 J of heat and hence the enthalpy changein kJ per mole will be:

0.05 mole of H2SO4 produces 5705.7 J of heat

1 mole of H2SO4 will produce 5705.7 / 0.05 J

= 114,114 J / mole

In kj/mole = 114 kJ/mole.

Hence, the enthalpy change of the reaction in kJ /mole is +114 kJ/mole.

1. Explain what the police siren sounds like to Jane:
2. Explain what the police siren sounds like to John:
3. Explain why the police siren sounds different between Jane and John:

Answers

Answer:

1. the siren has a lower pitch to Jane

2. the siren has a higher pitch to John

3. sound different due to moving away from Jane making the sound wave lengths longer and moving toward John making the wave lengths shorter

Explanation:

The Doppler effect expresses that sound is comparative with the spectator or observer. This is demonstrated valid by the model given with Jane and John. To one individual it could sound low and to someone else it could sound high, in light of where they are tuning in from. To John, the police alarm playing is a higher pitch. Be that as it may, to Jane this equivalent alarm is a totally extraordinary pitch and is heard lower than in comparison to the john.

This is a prime case of the Doppler Effect. They sound distinctive on the grounds that the sound is moving far from Jane making the sound frequencies longer and it is advancing toward John making the frequencies shorter. This impacts how the sound is heard by the human ear.

what volume in liters of carbon monoxide will be required to produce 18.9 L of nitrogen in the reaction below


2co(g) + 2no(g) -> n2(g) + 2co2(g)

Answers

Answer:

37.8 L OF CARBON MONOXIDE IS REQUIRED TO PRODUCE 18.9 L OF NITROGEN.

Explanation:

Equation for the reaction:

2 CO + 2 NO ------> N2 + 2 CO2

2 moles of carbon monoxide reacts with 2 moles of NO to form 1 mole of nitrogen

At standard temperature and pressure, 1 mole of a gas contains 22.4 dm3 volume.

So therefore, we can say:

2 * 22.4 L of CO produces  22.4 L of N2

44.8 L of CO produces 22.4 L of N2

Since, 18.9 L of Nitrogen is produced, the volume of CO needed is:

44.8 L of CO = 22.4 L of N

x L = 18.9 L

x L = 18.9 * 44.8 / 22.4

x L = 18.9 * 2

x = 37.8 L

The volume of Carbon monoxide required to produce 18.9 L of N2 is 37.8 L

Answer:

37.8

Explanation:

Which of the following is a covalent bond? A NaCl B K2O C H2O D MgO

Answers

Answer:

[tex]H_2O[/tex]

Explanation: Research has proven that ;

Water is a Polar Covalent Molecule

It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and  the two hydrogen atoms are not evenly distributed around the oxygen atom.

?
Which statement about energy transfer in a wave is ture ​

Answers

what are the options

An electrolysis cell has two electrodes. Which statement is correct? A. Reduction takes place at the anode, which is positively charged. B. Reduction takes place at the cathode, which is positively charged. C. Reduction takes place at the dynode, which is uncharged. D. Reduction takes place at the cathode, which is negatively charged. E. Reduction takes place at the anode, which is negatively charged.

Answers

Answer:

D. Reduction takes place at the cathode, which is negatively charged.

Explanation:

In an electrolytic cell there are two electrodes; the cathode and the anode. The anode is the positive electrode while the cathode is the negative electrode. Oxidation occurs at the anode while reduction occurs at the cathode.

At the anode, species give up electrons and become positively charged ions while at the cathode species accept electrons and become reduced.

a) Provide equation of K of this reaction, use symbol " ^ " for exponents. That means 1000 = 10^3 and 1/100 is 10^(-2). b) How many moles of compound F will be produced if only 2 moles of compound C is available? describe or show your work. 3 A + 5 B +4 C 5 D +7 E + F

Answers

Answer and Explanation:

a. The equation of K of this reaction is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

[tex]K = \frac{(D)^5 (E)^7 (F)}{(A)^3 (B)^5 (C)^4}[/tex]

b. The moles of compound F is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

               2 moles

Now, the mole of produced is

[tex]= \frac{1}{4} \times \ moles\ of\ c[/tex]

Now, we will the value of c by using the above equation

[tex]= \frac{1}{4} \times 2[/tex]

After solving the above equation we will get

0.5 moles

Most of the costs associated with using renewable resources are due to
а. overuse of resources
b. atmospheric pollution
C.lack of availability
d.global warming

Answers

Answer:

The answer is a.

Explanation:

Most of the costs associated with using renewable resources are due to overuse of the resources.

Most of the costs associated with using renewable resources are due to overuse of resources.

What are renewable resources?

Renewable resources are those resources which will be generated naturally and continously from the nature and these are also inexhaustible means non ended.

As from the definition it is clear that we can reuse or will use again and again these types of resources, that's why cost associated with these renewable resources are high.

Atmospheric pollution and global warming causes hazardous effect on the environment, so it will not be the reason with the associated cost.Lack of availability makes its important, not costly and in our daily life we used many kinds of renewable resorces so it is not possible to use costly resources daily.

Hence, overuse of resouces is one of the reason.

To know more about renewable resorces, visit the below link:
https://brainly.com/question/79953

The following reactions all have K < 1. 1) a. C6H5COO- (aq) + C6H5OH (aq) → C6H5COOH (aq) + C6H5O- (aq) b. F- (aq) + C6H5OH (aq) → C6H5O- (aq) + HF (aq) c. C6H5COOH (aq) + F- (aq) → HF (aq) + C6H5COO- (aq) Arrange the substances based on their relative acid strength.

Answers

Answer:

the acid strength is the order of [tex]\mathsf{HF _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5OH _{(aq)} }[/tex]

Explanation:

Given that :

a . [tex]\mathsf{C_6H_5COO^- _{(aq)} + C_6H_5OH _{(aq)} \to C_6H_5COOH _{(aq)} + C_6H_5O^- _{(aq)}}[/tex]

b.  [tex]\mathsf{ F^- _{(aq)} + C_6H_5OH _{(aq)} \to C_6H_5O^- _{(aq)} + HF _{(aq)} }[/tex]

c.  [tex]\mathsf{C_6H_5COOH _{(aq)} + F^- _{(aq)} \to HF _{(aq)} + C_6H_5COO^- _{(aq)} }[/tex]

Acid strength is the ability of an acid  to dissociate into a proton and an anion. Take for instance.

HA  ↔ H⁺ + A⁻

The  acid strength of the following compounds above are:

[tex]\mathsf{C_6H_5OH _{(aq)} }[/tex] = 1.00 × 10⁻¹⁰

[tex]\mathsf{HF _{(aq)} }[/tex] = 6.6 × 10⁻⁴

[tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] = 6.3 × 10⁻⁵

As the acid dissociation constant increases the relative acid strength also increases.

From above, the acid strength is the order of [tex]\mathsf{HF _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5OH _{(aq)} }[/tex]

[tex]\mathsf{C_6H_5COO^- }[/tex], [tex]\mathsf{C_6H_5O^- _{(aq)}}[/tex] and F⁻ are Bronsted- Lowry acid

Bronsted- Lowry acid are molecule or ion that have the ability to donate a proton.

The solubility product for Ag3PO4 is 2.8 × 10‑18. What is the solubility of silver phosphate in a solution which also contains 0.10 moles of silver nitrate per liter?

Answers

Answer:

2.8x10⁻¹⁵ M.

Explanation:

Hello,

In this case, the dissociation reaction for silver phosphate is:

[tex]Ag_3PO_4(s)\rightleftharpoons 3Ag^+(aq)+PO_4(aq)[/tex]

Therefore, the equilibrium expression is:

[tex]Ksp=[Ag^+]^3[PO_4^-][/tex]

In such a way, since the initial solution contains an initial concentration of silver ions (from silver nitrate) of 0.10M, we can write the equilibrium expression in terms of the reaction extent [tex]x[/tex]:

[tex]2.8x10^{-18}=(0.10+3x)^3*(x)[/tex]

Thus, solving for [tex]x[/tex] we have:

[tex]x=2.8x10^{-15}M[/tex]

Thus, the molar solubility of silver phosphate is 2.8x10⁻¹⁵ M.

Regards.

A compound is found to contain 29.68 % sulfur and 70.32 % fluorine by mass. What is the empirical formula for this compound?

Answers

Answer:

[tex]SF_4[/tex]

Explanation:

The first thing would be to calculate the number of moles of each element in the compound.

No of moles of sulfur (S) = mass/molar mass

                                        = 29.68/32.065 = 0.9256

No of moles of fluorine (F) = mass/molar mass

                                       = 70.32/18.998 = 3.7014

Then, let us find the atomic ratio of each of the element in the compound by dividing by the no of moles by the smallest no of mole:

            S            :             F

      [tex]\frac{0.9256}{0.9256}[/tex] = 1       :       [tex]\frac{3.7014}{0.9256}[/tex] = 4

Therefore, the empirical formula for the compound is [tex]SF_4[/tex]

PLEASE HELP!!
You are performing an experiment that involves the electrolysis of gold (I) bromide, also know as AuBr. You know that gold is less reactive than hydrogen. Which of the following would be the product of the reaction?
A. Hydrogen gas
B. Gold bromide
C. Oxygen gas
D. Pure gold

Answers

Answer:

D. Pure gold

Explanation:

Hello,

In this case, since gold, as a heavy metal, is said to be less reactive than hydrogen, when it undergoes electrolysis process when forming a salt, due to the action of the electric current, we can appreciate the formation of a layer of gold on the surface of the cathode via a reduction half-reaction from gold (I) to metallic gold:

[tex]Au^++1e^-\rightarrow Au^0[/tex]

Thereby, D. Pure gold is formed as the product of the reaction.

In contrast, more reactive metals than hydrogen such as sodium or potassium, will remain in solution so the hydrogen converted to hydrogen gas.

Best regards-

The pH of an acid solution is 5.82. Calculate the Ka for the monoprotic acid. The initial acid concentration is 0.010 M.

Answers

Answer:

The answer is

[tex]Ka = 2.29 \times {10}^{ - 14} moldm^{ - 3} [/tex]

Explanation:

The Ka of an acid when given the pH and concentration can be found by

[tex]pH = - \frac{1}{2} log(Ka) - \frac{1}{2} log(c) [/tex]

where

c is the concentration of the acid

From the question

pH = 5.82

c = 0.010 M

Substitute the values into the above formula and solve for Ka

We have

[tex]5.82 = - \frac{1}{2} log(Ka) - \frac{1}{2} log(0.010) [/tex][tex] - \frac{1}{2} log(Ka) = 5.82 + 1[/tex][tex] - \frac{1}{2} log(Ka) = 6.82[/tex]

Multiply through by - 2

[tex] log(Ka) = - 13.64[/tex]

Find antilog of both sides

We have the final answer as

[tex]Ka = 2.29 \times {10}^{ - 14} moldm^{ - 3} [/tex]

Hope this helps you

A 1 liter solution contains 0.436 M hypochlorous acid and 0.581 M potassium hypochlorite. Addition of 0.479 moles of barium hydroxide will: (Assume that the volume does not change upon the addition of barium hydroxide.)

Answers

Answer:

Exceed the buffer capacity and Raise the pH by several units

Explanation:

Options are:

Raise the pH slightly

Lower the pH slightly

Raise the pH by several units

Lower the pH by several units

Not change the pH

Exceed the buffer capacity

The hypochlorous acid, HClO, is in equilibrium with Hypochlorite ion (From potassium hypochlorite, ClO⁻) producing a buffer. Using H-H equation, pH of initial buffer is:

pH = pKa + log [ClO⁻] / [HClO]

pKa for hypochlorous acid is 7.53

pH = 7.53 + log [0.581M] / [0.436M]

pH = 7.65

Barium hydroxide reacts with HClO producing more ClO⁻, thus:

Ba(OH)₂ + 2HClO →  2ClO⁻ + 2H₂O

As 0.479 moles of Barium hdroxide are added. For a complete reaction you require 0.479mol * 2 = 0.958 moles of HClO

As you have just 0.436 moles (Volume = 1L),

The addition will:

Exceed the buffer capacity

The Ba(OH)₂ that reacts is:

0.436 moles HClO * (1mole (Ba(OH)₂ / 2 mol HClO) = 0.218 moles Ba(OH)₂ and will remain:

0.479 mol - 0.218 mol = 0.261 moles Ba(OH)₂

As 1 mole of Ba(OH)₂ contains 2 moles of OH⁻, moles of OH⁻ and molarity is:

0.261 moles* 2 = 0.522 moles OH⁻ = [OH⁻]

pOH = -log [OH⁻]

pOH = 0.28

And pH = 14 - pOH:

pH = 13.72

Thus, after the addition the pH change from 7.65 to 13.62:

Raise the pH by several units

Describe how you would prepare 500ml of 40% (w/v) aqueous iodine solution.
[Atomic mass of iodine =127g/mol].​

Answers

Answer:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Explanation:

Hello,

In this case, since 500 mL of a 40% (w/v) aqueous solution iodine is required, we can compute the required mass of iodine by defining the given mass-volume percent:

[tex]\% w/v=\frac{m_{iodine}}{m_{solution}} *100%=\frac{m_{iodine}}{m_{water}+m_{iodine}} *100%[/tex]

In such a way, we need to find mass of iodine, which is computed as:

[tex]m_{iodine}=\frac{\%w/v*m_{water}}{100w/v-\%} \\\\m_{iodine}=\frac{40*500}{100-40}\\ \\m_{iodine}=333.3g\\[/tex]

Thereby, the procedure will be:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Best regards.

What are periodic trends if ionic radii

Answers

Answer:

Explan ionization energy, atomic radius, and electron affinityation:

This question most likely has answer choices. The possible answer choices are as followed:

Ionic radii tend to increase down a group.Ionic radii tend to decrease across a period.Anionic radii tend to increase across a period.Cationic radii tend to decrease across a period.Ionic radii increase when switching from cations to anions in a period.

The answers are Ionic radii tend to increase down a group, Cationic radii tend to decrease across a period, and Ionic radii increase when switching from cations to anions in a period (1st, 4th, and 5th options).

The half-life of radium-226 is 1620 years. What percentage of a given amount of the radium will remain after 900 years

Answers

Answer:

68%

Explanation:

Since we need a percentage we can use any number we want for our initial value.

5(1/2)^900/1620 = 3.40

(3.40 / 5)*100 = 68%

To make sure lets use a different initial amount

1(1/2)^900/1620 = 0.68

(0.68/1) * 100 = 68%

The percentage of radium that will remain after 900 years is 68%.

To solve this question, we'll assume the initial amount of radium-226 to be 1.

Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:

Step 1

Determination of the number of half-lives that has elapsed.

Half-life (t½) = 1620 years

Time (t) = 900 years

Number of half-lives (n) =?

[tex]n = \frac{t}{t_{1/2}}\\\\n = \frac{900}{1620}\\\\n = \frac{5}{9}[/tex]

Step 2:

Determination of the amount remaining

Initial amount (N₀) = 1

Number of half-lives (n) = 5/9

Amount remaining (N) =?

[tex]N = \frac{N_{0} }{2^{n}}\\\\N = \frac{1}{2^{5/9}}[/tex]

N = 0.68

Step 3

Determination of the percentage remaining.

Initial amount (N₀) = 1

Amount remaining (N) = 0.68

Percentage remaining =?

Percentage remaining = N/N₀ × 100

Percentage remaining = 0.68/1 × 100

Percentage remaining = 68%

Therefore, the percentage amount of radium-226 that remains after 900 years is 68%

Learn more: https://brainly.com/question/10406952

Assuming that you start with 21.4 g of ammonia gas and 18.0 g of sodium metal and assuming that the reaction goes to completion, determine the mass (in grams) of each product.

Answers

Answer:

[tex]m_{NaNH_2}=30.42gNaNH_2[/tex]

[tex]m_{H_2}=0.783gH_2[/tex]

Explanation:

Hello,

In this case, the reaction between sodium and ammonia is:

[tex]2Na+2NH_3\rightarrow 2NaNH_2+H_2[/tex]

Thus, as we know the initial masses of both sodium and ammonia, we should first identify the limiting reactant, for which we firstly compute the available moles of sodium:

[tex]n_{Na}=18.0gNa*\frac{1molNa}{23.0gNa}=0.783molNa[/tex]

And the moles of sodium consumed by 21.4 g of ammonia (2:2 mole ratio):

[tex]n_{Na}^{\ consumed}=21.4gNH_3*\frac{1molNH_3}{17gNH_3} *\frac{2molNa}{2molNH_3} =1.26molNa[/tex]

In such a way, since less moles of sodium are available than consumed by ammonia, we can say, sodium is the limiting reactant. Furthermore, the mass of both sodium amide (39 g/mol) and hydrogen gas (2 g/mol) that are produced turn out:

[tex]m_{NaNH_2}=0.783molNa*\frac{2molNaNH_2}{2molNa}*\frac{39gNaNH_2}{1molNaNH_2}=30.42gNaNH_2[/tex]

[tex]m_{H_2}=0.783molNa*\frac{1molH_2}{2molNa}*\frac{2gH_2}{1molH_2}=0.783gH_2[/tex]

Best regards.

Why do prices increase when demand for a product is high? Companies know they can make more money by selling fewer products at higher prices. Companies know that people will be willing to spend more to get an in-demand product. Companies take advantage of the demand to make people spend more money on excess products. Companies know they can stop production and still make money on sales.

Answers

Answer:

Companies know that people will be willing to spend more to get an in-demand product.

Explanation:

When a product is really in demand, many customers are willing to part with more money order to purchase the product, as a result of that, many companies may take advantage of the increasing demand for the product to hike it's price.

Hence, the increase in price may not really have a negative impact on the quantity demanded because the demand for the product is high and customers are willing to spend more money in order to purchase an in-demand product, hence the answer above.

Prices increase when demand is high because companies know that people will be willing to spend more to get in-demand products.

Prices generally increase with higher demand for goods because the higher demand creates pressure for the supply to meet up.

Manufacturing companies can either increase their production to meet up with demand at the same price or capitalize on the situation to make more money by increasing the price without increasing the supply.

Since there is a buying pressure on the product in the market already, people would still be open to buying even at higher prices.

More on demand and prices can be found here: https://brainly.com/question/16170198?referrer=searchResults

Predict the order of acid strengths in the following series of cationic species: CH3CH2NH3 +, CH3CH=NH2

Answers

Answer:

CH3CH=NH2+>CH3CH2NH3 +

Explanation:

There are certain structural features that determine the stability of cationic species. These features that lead to the stability and higher acid strength of cations are those features that stabilize the cation.

CH3CH=NH2+ is more acidic than CH3CH2NH3 + owing to the fact that CH3CH=NH2+ contains a double bond in close proximity with the hydrogen that can be lost as a proton. Electron withdrawal by the double bond (greater s character) makes it easier for this hydrogen to be lost as a proton compared to CH3CH2NH3 +.

Write a balanced nuclear equation for the following: The nuclide thorium-234 undergoes beta decay to form protactinium-234 .

Answers

Answer:

²³⁴₉₀Th --> ²³⁴₉₁Pa + ⁰₋₁e

Explanation:

thorium-234 = ²³⁴₉₀Th

beta decay = ⁰₋₁e

protactinium-234 = ²³⁴₉₁Pa

The balanced nuclear equation is given as;

²³⁴₉₀Th --> ²³⁴₉₁Pa + ⁰₋₁e

What type of bond would form between two atoms of phosphorus? A. Single covalent bond B. Single ionic bond C. Triple covalent bond D. Double covalent bond

Answers

Answer:

A double bond is formed when two pairs of electrons are shared between the two participating atoms. It is represented by two dashes (=). It is represented by two dashes (=). Double covalent bonds are much stronger than a single bond, but they are less stable

Explanation:

How many atoms are in 65.0g of zinc?​

Answers

from

1moles=iatom

Mole=mass÷avogardos

Where

Avogadro's= 6.02×10²³

So moles = 65.0÷6.02×10²³

Atoms of zinc = 391.6 ×10²³

The number of atoms present in the given mass of Zinc that is 65.0gm is [tex]5.99\times10^{ 23}[/tex].

Atoms are the basic building blocks of matter. They are the smallest units of an element that retain the chemical properties of that element.

Now, to determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately  [tex]6.022 \times10^{23}[/tex]atoms per mole.

First, we calculate the number of moles of zinc in 65.0g by dividing the given mass by the molar mass of zinc. The molar mass of zinc (Zn) is 65.38 g/mol.

Number of moles = Mass / Molar mass

Number of moles = 65.0g / 65.38 g/mol ≈ 0.9942 mol

Next, multiply the number of moles by Avogadro's number to find the number of atoms.

Number of atoms =[tex]Number of moles \times Avogadro's number[/tex]

Number of atoms = [tex]0.9942[/tex]mol × [tex]6.022 \times10^{23}[/tex] atoms/mol

Therefore, approximately [tex]5.99\times10^{ 23}[/tex] atoms are present in 65.0g of zinc.

Learn more about atoms here:

https://brainly.com/question/1566330

#SPJ2

Draw the structure for the organic radical species produced by reaction of the compound with a chlorine atom. Assume reaction occurs at the weakest C-H bond.

Answers

Answer:

See explanation

Explanation:

The reaction of chlorine with the pictured compound will occur via free radical mechanism. The stability of the free radical formed will depend on its structure.

The order of stability of free radicals is methyl < primary < secondary < tertiary. Hence a tertiary carbon free radical is the most stable.

Looking at the compound, the radical will form at the position shown in the image attached since it will lead to a secondary free radical which is more stable.

The structure that should be drawn is shown below.

The reaction of chlorine:

It should be within the pictured compound that will arise via a free radical mechanism. The stability should be based on the structure. The stability of the order of free radicals should be methyl < primary < secondary < tertiary. Thus, a tertiary carbon free radical should be most stable.

Here look at the compound, the radical should form at the position that should be shown in the image that resulted in the secondary free radical i.e. more stable.

Consider the reaction for the dissolution of solid magnesium hydroxide.
Mg(OH)2(s)g2 (a) +2OH (ag)
If the concentration of hydroxide ion in a saturated solution of magnesium hydroxide is 2.24 x 104 M.
what is the molar solubility of magnesium hydroxide? Report your answer in scientific notation with three significant figures.

Answers

Answer:

Molar solubility is 1.12x10⁻⁴M

Explanation:

The dissolution of magnesium hydroxide is:

Mg(OH)₂(s) ⇄ Mg²⁺ + 2OH⁻

The molar solubility represents the moles of the solid that the solution can dissolve, that could be written as:

Mg(OH)₂(s) ⇄ X + 2X

Where X is solubility.

If you obtained a [OH⁻] = 2.24x10⁻⁴M and you know [OH⁻] = 2X:

2X = 2.24x10⁻⁴M

X = 2.24x10⁻⁴M/2

X =1.12x10⁻⁴M

Molar solubility is 1.12x10⁻⁴M
Other Questions
In your own words what does pre-written mean?. Once the government passes a bill to respond to a recession, it takes some time to disperse the funds to the appropriate agencies to start the programs. Economists call this time to start the projects the _________________. element X has two isotopes: X-27 and x-29. x-27 has an atomic mass of 26.975 and a relative abundance of 82.33%, and X-29 has an atomic mass of 29.018 and a relative abundance of 17.67%. calculate the atomic mass of element X. show your work We Choose to Go to the Moon: Which of these inferences about the Space Race is best supported by the text? Question 42 options: a) Just like in the development of industrialization and nuclear power in the past, the United States is leading the way. b) If space falls into the wrong hands, it could lead to a violent threat toward the United States. c) The United States has all of the technology it needs to launch a mission to the moon but just hasnt bothered to go there. d) If the United States does not make a serious push to reach the moon, no other country is likely to do it. Just a little bit of math hw 1. Dada a funo exponencial abaixo, se x=1, qual valor de imagem? * a) 1 b) -2 c) 0 d) -1 Julie believes that if she smiles, the whole world would smile with her. Her belief is based on the concept of _____. The Basque people of northern Spain have a distinctive language and culture, which they want to protect from outside influences. Although Spain's central government has given this group some autonomy, periodic violence has erupted by those seeking complete independencea.economic conflictb. religious conflictc. cultural conflictd. political conflict a cashier ask for your help as a customer/member wants to make return one day beyond the return window HELPPPP MEEEEEEMia has a large bag of sweets. If she shares the sweets equally among 2, 3, 4, 5 or 6 people there will always be 1 sweet left over. What is the smallest number of sweets there could be in the bag? f(x)=3-2x whats f(0) =? 27What is the value of the expression -x(y - 3)2 for x = -2, y = 6 ?HELP! answer if you can plz and thank you.. How dose this input and output table work? in judiths cofers "gravity," how do elenitas mother and father conlict? Nancy needs at least 1000 gigabytes of storage to take pictures and videos on her upcoming vacation. Shechecks and finds that she has 105 GB available on her phone. She plans on buying additional memorycards to get the rest of the storage she needs.The cheapest memory cards she can find each hold 256 GB and cost $10. She wants spend as little moneyas possible and still get the storage she needs.Let C represent the number of memory cards that Nancy buys. Starling Co. is considering disposing of a machine with a book value of $12,500 and estimated remaining life of five years. The old machine can be sold for $1,500. A new high-speed machine can be purchased at a cost of $25,000. It will have a useful life of five years and no residual value. It is estimated that the annual variable manufacturing costs will be reduced from $26,000 to $23,500 if the new machine is purchased. The five-year differential effect on profit from replacing the machine is a(n) Notice how the Mrs. Wachsmann stopped the group a couple of times to provide feedback and/or give suggestions. Why is this important to student learning What is the factorization of 2x^2 + 5x + 3?A. (x+3)(x + 3)B. (x+3)(x + 1)C. (2x+3)(x + 1)D. (2x + 3)(x + 3) Water flows through a pipe at a rate of 710 pints per day. Express this rate of flow in cubic feet per month. Round your answer to the nearest whole number. BRAINLIST GIVEN RIGHT ANSWERHow did Alfred Thayer Mahan believe the United States would best secure its interests?