14 protons,14 electrons and 14 neutrons

Answer

Iridium(IV)Nitrite

The correct IUPAC name of the Ir(NO₂)₄ compound is Iridium(IV)Nitrite.

Whether it's in a continuous chain or just a ring, the largest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature.

A chemical compound would seem to be a substance that contains numerous similar molecules made of atoms from different elements joined by chemical bonds.

The given compound is Ir(NO₂)₄. It can be seen that 4 nitro group is attached with Ir and its coordination number is 4. Hence, the IUPAC name will be Iridium(IV)Nitrite.

To know more about  IUPAC nomenclature.

https://brainly.com/question/16631447

#SPJ2

B is the answer to your question.

C2H4 is not capable of hydrogen bonding because the H's are attached to the Carbon, and the charge is 0.

Although HCl cannot hydrogen bond, that aspect does not hinder it's ability to dissolve. Because HCl is polar and so is water, the positive side of H2O will be attracted to the negative side of HCl, thus "tearing" the molecule apart. (Like dissolves like - polar dissolves polar)

Based on the Solubility rule, KBr is soluble because it contains a group 1 metal.

Answer:

The correct option is (c)

Answer:

the law of conservation of mass

Answer:

Mg+F2= Mgf2

Explanation:

F 2 is an oxidizing agent, Mg is a reducing agent. ; Pale-yellow to greenish gas with a pungent, irritating odor.

Answer:

Explanation:  Độ thẩm thấu của NaCl 0.9% và glucose 5% lần lượt là 308 và 278 ... Dung dịch natri clorid sử dụng trong pha thuốc tiêm truyền thường dùng

Answer:

See explanation

Explanation:

For a substance to dissolve in another, there must be some sort of interaction between the substances.

Recall that like dissolves like. That is, polar substances dissolve polar substances and non polar substances dissolve nonpolar substances.

Hydrocarbons are nonpolar hence they do not dissolve in polar sulphuric acid. Methyl benzoate is polar hence it dissolve in polar sulphuric acid.

The equation showing the ions is depicted in the image attached to this answer.

Answer:

D. releases heat energy.​

Explanation:

Answer:

In metrology, measurement uncertainty is the expression of the statistical dispersion of the values attributed to a measured quantity.By international agreement, this uncertainty has a probabilistic basis and reflects incomplete knowledge of the quantity value. It is a non-negative parameter.

Answer

A

Explanation:

due to high specific heat capacity it loses heat and has low temperature

Answer:

B. 1.65 L

Explanation:

Step 1: Write the balanced equation

2 SO₂(g) + O₂(g) ⇒ 2 SO₃(g)

Step 2: Calculate the moles of SO₂

The pressure of the gas is 1.20 atm and the temperature 25 °C (298 K). We can calculate the moles using the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 1.20 atm × 1.50 L / (0.0821 atm.L/mol.K) × 298 K = 0.0736 mol

Step 3: Calculate the moles of SO₃ produced

0.0736 mol SO₂ × 2 mol SO₃/2 mol SO₂ = 0.0736 mol SO₃

Step 4: Calculate the volume occupied by 0.0736 moles of SO₃ at STP

At STP, 1 mole of an ideal gas occupies 22.4 L.

0.0736 mol × 22.4 L/1 mol = 1.65 L

Answer:

d

Explanation:

Kevin can effectively deliver an update by sending a detailed EMAIL to Jill

The compound that has been soluble in water will be LiCl. Thus option E is correct.

The compounds that form stable bonds in water and are easy to dissociate are soluble in water. Generally, ionic compounds are easily soluble in water.

It has been an ionic compound, but the dissociation of AgCl will simultaneously form AgCl again making the compound insoluble in water.

It has been a covalent compound, thus it has been insoluble in water.

The compound is covalent in nature, thus it has been hard to dissociate in water.

The copper in the compound has been hard to dissolve and precipitate in the solution.

It has been an ionic compound and can be easily dissociated in the water.

Thus the compound that has been soluble in water will be LiCl. Thus option E is correct.

For more information about the soluble compounds, refer to the link:

https://brainly.com/question/1397002

Answer:

CaCl2 has ionic bond because here calcium gives its electron to the chlorine atom and becomes positivetly charged ion.

Chemistry 11 Solutions

978Ͳ0Ͳ07Ͳ105107Ͳ1Chapter 8 Solutions and Their Properties • MHR | 85

Amount in moles, n, of the NaCl(s):

NaCl

2.5 g

m

n

M

58.44 g

2

4.2778 10 m l

ol

o

/m

u

Molar concentration, c, of the NaCl(aq):

–2 4.2778 × 10 mol

0.100

0.42778 mol/L

0.43 mol

L

/L

n

c

V

The molar concentration of the saline solution is 0.43 mol/L.

Check Your Solution

The units are correct and the answer correctly shows two significant digits. The

dilution of the original concentrated solution is correct and the change to mol/L

seems reasonable.

Section 8.4 Preparing Solutions in the Laboratory

Solutions for Practice Problems

Student Edition page 386

51. Practice Problem (page 386)

Suppose that you are given a stock solution of 1.50 mol/L ammonium sulfate,

(NH4)2SO4(aq).

What volume of the stock solution do you need to use to prepare each of the

following solutions?

a. 50.0 mL of 1.00 mol/L (NH4)2SO4(aq)

b. 2 × 102 mL of 0.800 mol/L (NH4)2SO4(aq)

c. 250 mL of 0.300 mol/L NH4

+

(aq)

What Is Required?

You need to calculate the initial volume, V1, of (NH4)2SO4(aq) stock solution

needed to prepare each given dilute solution.

The dilution gives the relationship between the molarity and the volume of the solution. The volume of stock solution with a molarity of 1.50 mol/L is 50 mL.

Dilution is said to be the addition of more volume to the concentrated solution to make it less in molar concentration. This tells about the inverse and indirect relationship between the volume and the molar concentration of the solution.

Given,

Initial volume = V₁

Initial molar concentration (M₁) = 1.50 mol/L

Final volume (V₂) = 125 mL = 0.125 L

Final molar concentration (M₂)= 0.60 mol/L

The dilution is calculated as:

M₁V₁ = M₂V₂

V₁ = M₂V₂ ÷ M₁

Substituting the values in the above formula as

V₁ = M₂V₂ ÷ M₁

V₁ = (0.60 mol/L × 0.125 L) ÷ 1.50 mol/ L

V₁ = 0.05 L

= 50 mL

Therefore, 50 mL of stock solution is needed to make a 0.60 mol/L solution.

Learn more about dilution, here:

https://brainly.com/question/15718488

#SPJ2

Answer:

an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules

The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.

A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.

This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .

Therefore, the correct option is option D.

To know more about functional group, here:

https://brainly.com/question/29263610

#SPJ7

Answer:

NaCl, Na⁺,Cl⁻.

MgCl₂, Mg²⁺, Cl⁻.

CaO, Ca²⁺, O²⁻.

Li₃P, Li⁺, P³⁻.

Al₂S₃, Al³⁺, S²⁻.

Ca₃N₂, Ca²⁺, N³⁻.

FeCl₃, Fe³⁺, Cl⁻.

FeO, Fe²⁺, O²⁻.

Cu₂S, Cu⁺, S²⁻.

Cu₃N₂, Cu²⁺, N³⁻.

ZnO, Zn²⁺, O²⁻.

Ag₂S, Ag⁺, S²⁻.

K₂CO₃, K⁺, CO₃²⁻.

NaNO₃, Na⁺, NO₃⁻.

Ca(HCO₃)₂, Ca²⁺, HCO₃⁻.

Al(OH)₃, Al³⁺,OH⁻.

Li₃PO₄, Li⁺, PO₄³⁻.

K₂SO₄, K⁺, SO₄²⁻.

Explanation:

Sodium chloride. NaCl, formed by the cation Na⁺ and the anion Cl⁻.

Magnesium chloride. MgCl₂, formed by the cation Mg²⁺ and the anion Cl⁻.

Calcium oxide. CaO, formed by the cation Ca²⁺ and the anion O²⁻.

Lithium phosphide. Li₃P, formed by the cation Li⁺ and the anion P³⁻.

Aluminum sulfide. Al₂S₃, formed by the cation Al³⁺ and the anion S²⁻.

Calcium nitride. Ca₃N₂, formed by the cation Ca²⁺ and the anion N³⁻.

Iron(III)chloride. FeCl₃, formed by the cation Fe³⁺ and the anion Cl⁻.

Iron(II)oxide. FeO, formed by the cation Fe²⁺ and the anion O²⁻.

Copper(I)sulfide. Cu₂S, formed by the cation Cu⁺ and the anion S²⁻.

Copper(II)nitride. Cu₃N₂, formed by the cation Cu²⁺ and the anion N³⁻.

Zinc oxide. ZnO, formed by the cation Zn²⁺ and the anion O²⁻.

Silver sulfide. Ag₂S, formed by the cation Ag⁺ and the anion S²⁻.

Potassium carbonate. K₂CO₃, formed by the cation K⁺ and the anion CO₃²⁻.

Sodium nitrate. NaNO₃, formed by the cation Na⁺ and the anion NO₃⁻.

Calcium bicarbonate. Ca(HCO₃)₂, formed by the cation Ca²⁺ and the anion HCO₃⁻.

Aluminum hydroxide. Al(OH)₃, formed by the cation Al³⁺ and the anion OH⁻.

Lithium phosphate. Li₃PO₄, formed by the cation Li⁺ and the anion PO₄³⁻.

Potassium sulfate. K₂SO₄, formed by the cation K⁺ and the anion SO₄²⁻.

Answer:

vinegr and soda ..................

........

Answer:

acid + base = salt

so the answer is vinegar and soda

Explanation:

hope it helps you

Mark my answer as brainlist

have a good day

Answer:

An alkaline is a substance that dissolves in water to produce hydroxyl ions (OH-)

Explanation:

The pH range of an alkaline is from 8–14.

Acidic pH ranges from 0–6.9.

The measurement of body fluid compartments can be achieved by the dilution of chemical compounds that only circulate and disperse in the region of selected areas in the body. The dilution process is dependent on how the concentration is defined.

Given that:

∴

Concentration C  = 0.5 mg/100

Concentration C = 0.005 mg/ml

Since the mass amount of the chemical compound(i.e. insulin) and the concentration is known.

The volume of the body fluid compartment can be calculated as:

[tex]\mathbf{volume = \dfrac{\text{mass of the marker }}{concentration }}[/tex]

[tex]Volume = \dfrac{80 \ mg}{0.005 \ mg/ml}[/tex]

Volume = 16000 ml

Thus, it is known that insulin is generally utilized for the measurement of the extracellular fluid volume and serves as a cell impermeant marker.

As a result;

The volume of the extracellular fluid compartment is 16000 ml.

However, the tritium-labeled water is a good marker for the entire body fluid compartment due to the fact that:

Given that:

plasma activity of tritium = 20 cpm/ml

i.e.

In 1 ml of plasma, 20 cpm of tritium is present.

As such, in 960,000 counts per min (cpm) of tritium-labeled water, the volume of the whole body compartment is:

[tex]\mathbf{= \dfrac{960000}{20} ml \plasma}[/tex]

= 48000 ml of plasma

Therefore, we can conclude that the volumes of the body compartment that can be determined are:

Learn more about body fluid compartments here:

https://brainly.com/question/6791522?referrer=searchResults

Explanation:

The required concentration of [tex]HNO_3[/tex] M1 =0.222 M.

The required volume of [tex]HNO_3[/tex] is V1 =225 mL.

The standard solution of [tex]HNO_3[/tex] is M2 =16 M.

The volume of standard solution required can be calculated as shown below:

Since the number of moles of solute does not change on dilution.

The number of moles [tex]n=molarity * volume[/tex]

[tex]M_1.V_1=M_2.V_2[/tex]

[tex]V2=\frac{M_1.V_1}{M_2} \\=0.222M x 225 mL / 16 M\\=3.12 mL[/tex]

Hence, 3.12 mL of 16 m nitric acid is required to prepare 0.222 M and 225 mL of nitric acid.

[tex]\boxed{\sf {AlCl_3\atop Aluminium\:Chloride}+{H_2\atop Hydrogen}\longrightarrow {Al\atop Aluminium}+{HCl\atop Hydrochloric\:acid}}[/tex]

Balanced Equation:-

[tex]\boxed{\sf {2AlCl_3\atop Aluminium\:Chloride}+{3H_2\atop Hydrogen}\longrightarrow {2Al\atop Aluminium}+{6HCl\atop Hydrochloric\:acid}}[/tex]

Answer:

Table salt: answer salt

Tea: answer acidic

Carbonated drinks: answer acidic

Baking powder: answer acid and base

Detergent: answer acid and basic

Alum: answer acidic

Explanation:

I hope this helps. Enjoy your day!

Answer:

hydrogen nitrate + sodium hydrochlorate- sodium nitrate+ water + co2 (acid base reaction)

silver nitrate + calcium chloride - silver chloride+ calcium nitrate ( double displacement reaction)

hydrogen + nitrogen - ammonia gas ( simple contact reaction)

hydrogen peroxide - water + oxygen ( single displacement reaction)

Hope it helps :)

Answer:

[ICl] = 0.0420 M

[I₂]  = [Cl₂] = 0.0140 M

Explanation:

Step 1: Calculate the initial concentration of ICl

[ICl] = 0.350 mol / 5.00 L = 0.0700 M

Step 2: Make an ICE chart

        2 ICl(g) ⇄ I₂(g) + Cl₂(g)

I        0.0700     0         0

C        -2x          +x        +x

E    0.0700-2x      x          x

The concentration equilibrium constant (Kc) is:

Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²

0.332 = x/0.0700-2x

x = 0.0140

The concentrations at equilbrium are:

[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M

[I₂]  = [Cl₂] = x = 0.0140 M

Answer:

"[tex]6.7\times 10^{-4} \ atm[/tex]" is the right answer.

Explanation:

Given:

Partial pressure of [tex]N_2[/tex],

= 0.20 atm

Partial pressure of [tex]H_2[/tex],

= 0.15 atm

[tex]K_p = 1.5\times 10^3[/tex] at [tex]400^{\circ} C[/tex]

As we know,

⇒ [tex]K_p = \frac{pN_2\times pH_2^3}{pNH_3^2}[/tex]

By putting the values, we get

    [tex]1.5\times 10^3=\frac{0.20\times (0.15)^3}{pNH_3^2}[/tex]

        [tex]pNH_3^2 = \frac{0.000675}{1.5\times 10^3}[/tex]

                    [tex]=6.7\times 10^{-4} \ atm[/tex]

Answer:

true because whenever the temperature drops it gets colder

Answer:

yes it is

Explanation:

because there are some acid which really harm skin.

Answer:

The various uses of water :

1. Water is used for daily purpose like cooking , bathing , cleaning and drinking.

2. Water is used as a universal solvent.

3. water maintains the temperature of our body.

4. Water helps in digestion in our body.

5 .water is used in factories and industries.

6. Water is used to grow plants , vegetables and crops.

Answer:

The various use of water are;

I) Cooking.

ii) Drinking

III) Bathing

iv) Generating hydro- electricity

v) Construction work etc

Answer: 1090°C

Explanation: According to combined gas laws

(P1 × V1) ÷ T1 = (P2 × V2) ÷ T2

where P1 = initial pressure of gas = 80.0 kPa

V1 = initial volume of gas = 10.0 L

T1 = initial temperature of gas = 240 °C = (240 + 273) K = 513 K

P2 = final pressure of gas = 107 kPa

V2 = final volume of gas = 20.0 L

T2 = final temperature of gas

Substituting the values,

(80.0 kPa × 10.0 L) ÷ (513 K) = (107 kPa × 20.0 L) ÷ T2

T2 = 513 K × (107 kPa ÷80.0 kPa) × (20.0 L ÷ 10.0 L)

T2 = 513 K × (1.3375) × (2)

T2 = 1372.275 K

T2 = (1372.275 - 273) °C

T2 = 1099 °C

1090 degree Celsius

hope it helps