Answer:
The linear velocity of europe's motion in its orbit is 7875.58 km/hr.
Explanation:
Given that,
Time period of lo = 1.77 days
Time period of europa = 3.55 days
Distance of lo from jupiter = 421600 km
We know that,
Distance of europa from jupiter = 671000 km
We need to calculate the linear velocity of europe's motion in its orbit
Using formula of velocity
[tex]v=\dfrac{d}{t}[/tex]
Where, d = distance between europa and jupiter
t = time
Put the value into the formula
[tex]v=\dfrac{671000}{3.55\times24}[/tex]
[tex]v=7875.58\ km/hr[/tex]
Hence, The linear velocity of europe's motion in its orbit is 7875.58 km/hr.
When light travels from air into water, Group of answer choices its wavelength changes, but its velocity and frequency does not change its velocity remains constant, but its frequency and wavelength changes its velocity, wavelength and frequency all change its velocity and wavelength changes, but its frequency does not change
Answer:
its velocity, wavelength and frequency all change
Explanation:
Whenever a wave crosses the boundary between two media of different densities, its velocity, frequency and wavelength changes. This appears as a bending of the wave as it crosses the boundary from one medium to another.
Refraction is a fundamental property of waves. Hence when light is travelling from air into water, it wavelength, speed and frequency all changes at the interface between the two media.
An archer shoots an arrow in the air, horizontally. However, after moving some
distance, the arrow falls to the ground. Name and define the initial force that sets
the arrow in motion. Explain why the arrow ultimately falls down.
Answer:
The name of the force is elastic (spring) force
Explanation:
The elastic force which is the restoration force of an elastic (spring like) object that tries to return to its initial non-stretched state built up by the pulling of the bow by the archer (using the muscles) pushes on the arrow which the archer releases the same time he leaves the bow string, and the arrow flies in the direction already pointed by the archer
The arrow ultimately falls down due to gravity forces that acts on all objects within the Earths gravitational field. However due to the speed of constant horizontal speed of the arrow and increasing downward speed of the due to the gravity force, the falling of the arrow looks disappointing.
a body weighs 100newtons and 80newtons when submerged in water.calculate the upthrust action on the body
Answer:
20 N
Explanation:
In air, the normal force is equal to the weight.
∑F = ma
N − mg = 0
N = mg
Submerged in water, the normal force is equal to the weight minus the buoyant force:
∑F = ma
B + N − mg = 0
N = mg − B
Plugging in values:
80 N = 100 N − B
B = 20 N
For each of the following statements about deep-water waves, determine if the statement is true or false, then explain why: The longer the wave, the deeper the wave base. The greater the wave height, the deeper the wave base. The longer the wave, the faster the wave travels. The greater the wave height, the faster the wave travels. The faster the wave, the greater the wave height.
Answer:
The longer the wave, the deeper the wave base - True
The greater the wave height, the deeper the wave base - false
The longer the wave, the faster the wave travels- true
The greater the wave height, the faster the wave travels- false
The faster the wave, the greater the wave height - False
Explanation:
When a wave has a high length it means that the wave base will be deeper.
The longer the wave, the deeper the wave base - True
When the weight height is big , the wave base will be deeper.
The greater the wave height, the deeper the wave base - false
The longer the wave, the faster the wave travels- true
The greater the wave height, the faster the wave travels- false
The faster the wave, the greater the wave height - False
The temperature of air changes from 0 to 10°C while its velocity changes from zero to a final velocity, and its elevation changes from zero to a final elevation. At which values of final air velocity and final elevation will the internal, kinetic, and potential energy changes be equal?
Answer:
Final velocity = 119.83 m/s
Final elevation = 731.9 m
Explanation:
We are told that temperature of air changes from 0 to 10°C
Thus;
Change in temperature; ΔT = 10 - 0 = 10°C
Also, its velocity changes from zero to a final velocity. Thus;
v1 = 0 m/s
v2 is unknown
Also, its elevation changes from zero to a final elevation.
So, z1 = 0 and z2 is unknown
Now, we want to find v2 and z2 when the internal, kinetic and potential energy are equal.
Thus Equating the formula for both kinetic and internal energy gives;
½m(v2² - v1²) = mc_v•ΔT
m will cancel out and v1 is zero to give;
v2² = 2c_v•ΔT
v2 = √(2c_v•ΔT)
Where c_v is specific heat of constant volume of air with a constant value of 718 J/Kg.K
Thus;
v2 = √(2 × 718 × 10)
v2 = √14360
v2 = 119.83 m/s
To find z2, we will equate potential energy formula to that of the internal energy.
Thus;
mg(z2 - z1) = mc_v•ΔT
m will cancel out and since z1 is zero, then we have;
z2 = (c_v•ΔT)/g
z2 = 718 × 10/9.81
z2 = 731.9 m
A 30-µF capacitor is charged to an unknown potential V and then connected across an initially uncharged 10-uF capacitor. If the final potential difference across the .10-µF capacitor is 20 V, determine V
Answer:
V = 26.6 volts
Explanation:
Let Initial Potential Difference be V.
Charge (Q) accumulated in 30 mF Capacitor =
Q = C * V
Q= 30 * V
Now, Common Potential after connecting to uncharged 10mF capacitor in parallel = 20 Volt
Total Charge =Total Capacity * Common Potential
30 * V = ( 30 + 10) * 20
V = 26.6 volts
The unknown potential across the 30-µF capacitor is 6.67 V.
The given parameters;
initial capacitance of the capacitor, C = 30 µFunknown potential in the 30 µF capacitor = V₁potential difference in 10 µF capacitor = 20 VSince the potential difference between the two capacitors are different, the two capacitors are in series connection.
In series circuit arrangement, the quantity of charge flowing in each capacitor is the same.
[tex]Q_{30\ \mu F} = Q_{10 \ \mu F}[/tex]
[tex]Q_{10 \ \mu F} = CV = 10\times 10^{-6} \times 20 = 0.0002 \ C[/tex]
The potential difference are different and the total potential is given as;
[tex]V_{T} = V_1 + V_2\\\\V_1 = \frac{Q}{C_1} \\\\V_2 = \frac{Q}{C_2} \\\\V_1+V_2 = \frac{Q}{C_1} + \frac{Q}{C_2}\\\\V_1 + V_2 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1 + 20 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1+ 20 = \frac{Q(C_2+ C_1)}{C_1 C_2} \\\\V_1 = \frac{Q(C_2+ C_1)}{C_1 C_2} - 20[/tex]
[tex]V_1 = \frac{0.0002(10\times 10^{-6}\ + \ 30\times 10^{-6})}{(30\times 10^{-6}) (10\times 10^{-6})} - 20\\\\V_1 = \frac{8\times 10^{-9}}{3\times 10^{-10}} - 20\\\\V_1 = 26.67 - 20\\\\V_1 = 6.67 \ V[/tex]
Thus, the unknown potential across the 30-µF capacitor is 6.67 V.
Learn more here:https://brainly.com/question/23899758
I put in 60 points but i think the thing changed is going to change it to 30 + brainly i will give brainliest to best answer Define and describe in detail (and in your own words) ultrasound and infrasound Describe how ultrasound and infrasound are used in specific industrial applications and provide detailed examples. 350 words thanks plz plz plz no funny answers i am using a lot of points on this because i really need help not ignorant people who just want points
Answer:
Infrasound vs. Ultrasound: Infrasound is sound that is below the lower limit of human hearing, below 20 Hz, and ultrasound is above the upper limit of human hearing, above 20,000 Hz. Individuals use infrasound - this recurrence run for checking seismic tremors and volcanoes, graphing rock and oil developments underneath the earth. Infrasound is described by a capacity to get around hindrances with little scattering.
For instance, a few creatures, for example, whales, elephants and giraffes convey utilizing infrasound over significant distances. Torrential slides, volcanoes, seismic tremors, sea waves, water falls and meteors produce infrasonic waves. Symptomatic ultrasound, additionally called sonography or demonstrative clinical sonography, is an imaging technique that utilizes high-recurrence sound waves to create pictures of structures inside your body. The pictures can give important data to diagnosing and treating an assortment of ailments and conditions.
Explanation:
idk how many words this is but its a start for u to add on to and i hope this helps and its in my own words - pls mark me brainiest
As a way of determining the inductance of a coil used in a research project, a student first connects the coil to a 5.62 V battery and measures a current of 0.698 A. The student then connects the coil to a 35.1 V(rms), 93.1 Hz generator and measures an rms current of 0.36 A. What is the inductance
Answer:
Its inductance L = 166 mH
Explanation:
Since a current, I = 0.698 A is obtained when a voltage , V = 5.62 V is applied, the resistance of the coil is gotten from V = IR
R = V/I = 5.62/0.698 = 8.052 Ω
Since we have a current of I' = 0.36 A (rms) when a voltage of V' = 35.1 V (rms) is applied, the impedance Z of the coil is gotten from
V₀' = I₀'Z where V₀ = maximum voltage = √2V' and I₀ = maximum current = √2I'
Z = V'/I' = √2 × 35.1 V/√2 × 0.36 V = 97.5 Ω
WE now find the reactance X of the coil from
Z² = X² + R²
X = √(Z² - R²)
= √(97.5² - 8.05²)
= √(9506.25 - 64.8025)
= √9441.4475
= 97.17 Ω
Now, the reactance X = 2πfL where f = frequency of generator = 93.1 Hz and L = inductance of coil.
L = X/2πf
= 97.17/2π(93.1 Hz)
= 97.17 Ω/584.965 rad/s
= 0.166 H
= 166 mH
Its inductance L = 166 mH
1. A student gathered two boxes of the same size made of different materials: glass and clear plastic. She placed them on a windowsill in the sun for an hour and then measured the temperature of the air in each box. Which statement best describes the purpose of the experiment? to relate the type of box material to the temperature of the air within the box to relate the size of the box to the temperature of the air within the box to relate the type of box material to the mass of the box to relate the amount of time a box is exposed to sunlight to the temperature of the air within the box 2. What is the average time for the toy car to move 1.0 m on dirt? 20.2 s 24.4 s 28.1 s 60.7 s 3. A student collected data about the distance a ball falls over time. Which type of graph should he use to represent the data? circle graph scatterplot histogram bar graph
Answer:
1. to relate the type of box material to the temperature of the air within the box
2. Question is incomplete
3. scatterplot
Explanation:
1. The only thing done differently in this experiment is the type of material used in making the boxes, hence the experiment must be about that. Before proceeding to answering this question, we must have this at the back of our minds.
We can gather from the experiment that the boxes are of the same size and were subjected to sunlight for an hour (the same time duration for both). Hence, the temperature of the air inside the box will only be affected by the type of material the box is made of since the boxes have the same size and were subjected to sunlight for the same duration.
From the options provided, the best description for this experiment is; to relate the type of box material to the temperature of the air within the box.
2. The question is incomplete. The value for speed/velocity needed to calculate the average time is missing.
However, the formula needed here is velocity = distance ÷ time
3. There are two variables in this experiment; distance and time
The type of graph that shows two variables on it (of the options provided) is the scatterplot.
With the aid of a suitable diagram, explain what is meant by an electromagnetic wave.
Answer:
Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field. In other words, EM waves are composed of oscillating magnetic and electric fields.
Explanation:
URGENT!! Look at attached image to see question.
Explanation:
The answer is option B
The number of reactant molecules and product molecules is even.
Mr. Franklin uses a machine that has an efficiency of 80%. The machine applies a force of 800 N through a distance of 20 m. Mr. Franklin applies a force of 50 N on the machine. Through what distance does Mr. Franklin apply the force? 4 m 16 m 260 m 400 m
Answer:
The distance Mr Franklin applied the force is 400 m
Explanation:
The efficiency of the machine = 80%
The force applied by the machine = 800 N
The distance over which the force is applied by the machine = 20 m
The force applied by Mr. Franklin = 50 N
The work done by the machine = 800 × 20 = 16000 J
The ideal work at 100% efficiency = X
80% of X = 16000 J
X = 16000 N/0.8 = 20,000 J
Therefore, we have have;
Work = Force × Distance;
20,000 J = 50 N × Distance Mr Franklin applied the force
Distance Mr Franklin applied the force = 20,000 J/(50 N) = 400 m
The distance Mr Franklin applied the force = 400 m.
Answer:
the awnser in 400m
Explanation:
did the test on edge 2020 and got it right
Most cars have a coolant reservoir to catch radiator fluid that may overflow when the engine is hot. A radiator is made of copper and is filled to its 21.1 L capacity when at 12.2°C. What volume of radiator fluid (in L) will overflow when the radiator and fluid reach a temperature of 95.0°C, given that the fluid's volume coefficient of expansion is β = 400 ✕ 10−6/°C? (Your answer will be a conservative estimate, as most car radiators have operating temperatures greater than 95.0°C).
Answer:
0.699 L of the fluid will overflow
Explanation:
We know that the change in volume ΔV = V₀β(T₂ - T₁) where V₀ = volume of radiator = 21.1 L, β = coefficient of volume expansion of fluid = 400 × 10⁻⁶/°C
and T₁ = initial temperature of radiator = 12.2°C and T₂ = final temperature of radiator = 95.0°C
Substituting these values into the equation, we have
ΔV = V₀β(T₂ - T₁)
= 21.1 L × 400 × 10⁻⁶/°C × (95.0°C - 12.2°C)
= 21.1 L × 400 × 10⁻⁶/°C × 82.8°C = 698832 × 10⁻⁶ L
= 0.698832 L
≅ 0.699 L = 0.7 L to the nearest tenth litre
So, 0.699 L of the fluid will overflow
Describe the following as a (a) distance (b) speed (c) acceleration (d) force
6. Force
7 speed
8 distance
9 acceleration
Why is it important to wear loose-fitting clothing when exercising?
It isn't best to wear loose fitting clothing when exercising, as you may not feel too comfortable. It depends on the person. However there are a few advantages.
• Tight clothing may not be comfortable as well
• Looser clothing allows easy evaporation of sweat
Then again when it says " loose - fitting " it may mean not too baggy. Baggy clothing can have an impact on your physical activity.
Answer All of the above
For people on a p e x
Consider a block on a spring oscillating on a frictionless surface. The amplitude of the oscillation is 11 cm, and the speed of the block as it passes through the equilibrium position is 62 cm/s. What is the angular frequency of the block's motion
Answer:
The angular frequency of the block is ω = 5.64 rad/s
Explanation:
The speed of the block v = rω where r = amplitude of the oscillation and ω = angular frequency of the oscillation.
Now ω = v/r since v = speed of the block = 62 cm/s and r = the amplitude of the oscillation = 11 cm.
The angular frequency of the oscillation ω is
ω = v/r
ω = 62 cm/s ÷ 11 cm
ω = 5.64 rad/s
So, the angular frequency of the block is ω = 5.64 rad/s
Astronomers can now report that active star formation was going on at a time when the universe was only 20% as old as it is today. When astronomers make such a statement, how can they know what was happening inside galaxies way back then
Answer:
First, as you may know, the light travels at a given velocity.
In vaccum, this velocity is c = 3x10^8 m/s.
And we know that:
distance = velocity*time
Now, if some object (like a star ) is really far away, the light that comes from that star may take years to reach the Earth.
This means that the images that the astronomers see today, actually happened years and years ago (So the night sky is like a picture of the "past" of the universe)
Also, for example, if an astronomer sees some particular thing, he can apply a model (a "simplification" of some phenomena that is used to simplify it an explain it) and with the model, the scientist can infer the information of the given thing some time before it was seen.
The astronomers could know what was happening inside galaxies way back then by the fact that;
they examine the spectra of galaxies (or the overall colors of galaxies) with the highest redshifts they can find
Astronomers Measure the wavelength of the light that is stretched, so the light is seen as 'shifted' towards the red part of the spectrum by using spectroscopy. This measure is also called redshift.
This invokes a ray of light through a triangular prism that splits the light into various components known as spectrum.
The way the astronomers could use this concept to know what was happening in the galaxies before is by examining the spectra of galaxies that have the highest redshifts.
Read more at; https://brainly.com/question/15995216
as fast as you can find the answer
Answer:
Explanation:
a) From the diagram, the load will be expressed in newton. The load will be the weight of the box on the inclined plane.
Load = mass * acceleration due to gravity.
Given the mass of the object = 100kg
acceleration due to gravity = 9.8m/s²
Load (in Newton) = 100*9.8
Load (in Newton) = 980N
b) The formula for calculating the velocity ratio of an inclined plane is expressed as VR = 1/sinθ where θ is the angle of inclination.
Given θ = 30°,
VR = 1/sin30°
VR = 1/0.5
VR = 1/(1/2)
VR = 1* 2/1
VR = 2
The velocity ratio is 2.
c) Length of the inclined plane can be calculated using the SOH, CAH, TOA trigonometry identity.
According to SOH, sinθ = opposite/hypotenuse
sin30° = 1/2 = opp/hyp
This shows that the opposite side of the triangle is 1 and the hypotenuse is 2. The length if the inclined is the length of the longest side i.e the hypotenuse. Hence the length of the inclined plane is 2m
d) Mechanical Advantage is the ratio of the load to the effort applied on an object.
Given the Load = 980N and the effort applied to the load on the incline plane = 400N
MA = Load/Effort
MA = 980/400
MA = 2.45
e) Efficiency = MA/VR * 100
Efficiency = 2.45/2 * 100
Efficiency = 122.5%
state the reason why wick lamps are made of cotton
Answer:
Reason:- We use cotton to make the wick of a spirit lamp because cotton has thread strands which act like fine capillaries and help in drawing up a steady supply of oil in the lamp for burning by capillary action
Explanation:
Determine whether each sum, difference, product,
or quotient represents a rational number or an
irrational number. Explain how you know without
simplifying
Explanation:
The asked in the Question is missing, although i am assuming the number
as [tex]\frac{6}{23}[/tex] ÷[tex]\frac{\sqrt{2} }{2}[/tex].
The given expression contains an irrational number. So, the quotient will also be an irrational number.
Solving
[tex]\frac{6}{23}\times\frac{\sqrt{2} }{2} \\=\frac{3\sqrt{2} }{23}[/tex]
Which is an irrational number.
ball is thrown upward from a window that is 12 m above the ground. The ball reaches a maximum height of 4 m above the window before falling all the way down to the ground. What distance did the ball travel?
Answer:
20 m
Explanation:
The ball travels 4 m up, then 16 m down. It travels a total distance of 20 m.
Which type of energy is produced
by vibrations traveling in waves?
A. chemical energy
B. nuclear energy
C. sound energy
Answer:
C. sound energy
Explanation:
hope this helps
Two mass m1 and m2 lie on a frictionless surface. Between the two masses is a compressed spring, with spring constant k. The system is held in place. At time t=0 the blocks are released. The blocks move off in opposite directions with velocities v1 and v2. how much was the spring compressed?
Answer:
The spring was compressed the following amount:
[tex]\Delta x=\sqrt{ \frac{m_1\,v_1^2+ m_2\,v_2^2}{k} }[/tex]
Explanation:
Use conservation of energy between initial and final state, considering that the surface id frictionless, and there is no loss in thermal energy due to friction. the total initial energy is the potential energy of the compressed spring (by an amount [tex]\Delta x[/tex]), and the total final energy is the addition of the kinetic energies of both masses:
[tex]E_i=\frac{1}{2} k\,(\Delta x)^2\\\\E_f=\frac{1}{2} m_1\,v_1^2+\frac{1}{2} m_2\,v_2^2[/tex]
[tex]E_i=E_f\\[/tex]
[tex]\frac{1}{2} k\,(\Delta x)^2=\frac{1}{2} m_1\,v_1^2+\frac{1}{2} m_2\,v_2^2\\k\,(\Delta x)^2=m_1\,v_1^2+ m_2\,v_2^2\\(\Delta x)^2=\frac{m_1\,v_1^2+ m_2\,v_2^2}{k} \\\Delta x=\sqrt{ \frac{m_1\,v_1^2+ m_2\,v_2^2}{k} }[/tex]
( TRUE false )
1.)manuals are the organic matter.
2.)combine is used for sowing the seeds.
3.) the first agricultural task is sowing of seeds.
4.) many plants are first grown in Kinder Gardens and then sown in fields.
5.) earthworm are farmer friendly.
6.)substance that kills
pests are called weedicides.
7.) animals which provide us both egg and flesh are called milch animals.
8.) Grains should be dried in Sun before storage.
9.)wheat,gram,barley,potato, are kharif crops.
10.) the crops on in June /July and harvested in September/ October are called rabi crops.
plz answerzz fast
Answer:
number 6 is wrong
the answer is pesticides
2.combines are used for harvesting or threshing.so number 2 is wrong
at least you tried
Explanation:
there is no such thing as weedicides
Answer:
1. True
2.True
3.False
4. True
5. True
6.False
7.False
8.True
9.False
10.False
If 60 L of a gas are at 4 atm and 27 C °, what pressure would it have if the volume is 40 L 127 C °?
Answer:
8 atm
Explanation:
Ideal gas law:
PV = nRT
where P is pressure, V is volume, n is moles, R is universal gas constant, and T is absolute temperature.
If n is constant:
PV / T = PV / T
(4 atm) (60 L) / (27 + 273) K = P (40 L) / (127 + 273) K
0.8 atm = 0.1 P
P = 8 atm
Sound waves move the fastest through which medium?
Answer:
Sound travels fastest through solids.
Explanation:
This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.
Sound waves move the fastest through the solid. The speed of the sound wave in the liquid and gas is low,
What is sound wave?A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.
Solids transmit sound the fastest. Because the molecules in a solid medium are much closer together than in a liquid or gas, sound waves can move through it much faster.
Hence, sound waves move the fastest through the solid.
To learn more about the sound wave, refer to the link;
https://brainly.com/question/11797560
#SPJ2
placement.
A body is thrown vertically upwards. Its velocity keeps on decreasing. What happens
to its kinetic energy when its reaches the maximum height? Why?
If the speed of a body is increased four times, how will its kinetic energy be affected?
Answer:
kinetic energy will be equal to 0
Explanation:
this is because at final position velocity of body will become zero.
kinetic energy eill be 8 times
Match the following:
Tailored software
. Utility software
Operating system
Software
Packaged software
Set of programs
Library management system
Scan viruses
Microsoft Office
used to coordinate the hardw
the computer
Answer:
1) Tailored software Library management system
2) Utility software Scan viruses
3) Operating system Used to coordinate the hardware of the computer
4) Packaged software set of programs Microsoft office
Explanation:
1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation
2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks
3) Operating system software
The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer
4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.
in this system, potential and kinetic energy are ____ proportional.
Answer:
Inversely proportional
Explanation:
P.E ∞ h
K.E ∞ v
v ∞ 1/h
Therefore
K.E ∞ 1/h
Then
P.E ∞ 1/(K.E)
Answer:
Inversely
Explanation:
What is the equation for burning a fossil fuel
Answer:
Fuel + O2 → CO2 + H2O
Explanation:
