Answer:
show the pictures pls specify
Can you help me on this. I will support your correct answer
difference between Nitrogen 1 oxide and Oxygen
Answer:
one atom of oxygen is not equal to oxygen
Cho các dung dịch: Glucozơ, glixerol, fomanđehit, etanol. Có thể dùng thuốc thử nào sau đây để phân biệt được cả 4 dung dịch trên?
A. Cu(OH)2; B. Dung dịch AgNO3 trong NH3;
C. Na kim loại; D. Nước brom.
Xem thêm tại: https://loigiaihay.com/bai-2-trang-25-sgk-hoa-hoc-12-c55a8069.html#ixzz71KH6guhm
Answer:
chắc là câu B í
Explanation:
A sample of gas has a volume of 20 cm³.The pressure is changed to 90 kPa at constant temperature,while the volume increases to 75 cm³.What was the original pressure of the gas?
Answer:
337.5kPa ~ 338kPa
Explanation:
Using the ideal gas law PV=nRT we have the following definitions from the problem:
V(initial) = 20cm³
P(initial) = ?kPa
V(final) = 75cm³
P(final) = 90kPa
Since we know that the number of moles of the sample did not change, nor did the temperature, nor does the ideal gas constant (R) we can rewrite this equation to state:
P(initial)V(initial) = nRT =P(final)V(final) ~ P(initial)V(initial) = P(final)V(final)
Rearranging this equation as we are solving for the initial pressure we find that:
P(initial) = (P(final)V(final))/V(initial)
P(initial) = ((90kPa)(75cm³))/20cm³
P(initial) = 337.5kPa ~ 338kPA
Which among the following mixtures will show tyndal effect?
i) copper sulphate solution
ii) sand in water.
iii) milk.
iv) starch solution
Answer:
milk and starch solution are the colloids, hence these will show the tyndall effect
Answer:
milk and starch solution
Explanation:
Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.
Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.
What is the pressure in atm exerted by 1.8 g of H2 gas exert in a 4.3 L balloon at 27ºC? R = 0.821(L*atm) / (mol*K)
kakamc cjdismxsjxj xjcodmd xksowmd x
The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
What is Ideal gas law ?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Let's convert grams to moles (via molar mass).
Molar Mass (H₂) : 2 (1.008 g/mol)
Molar Mass (H₂) : 2.016 g/mol
1.8 grams H₂ 1 mole
---------------------- x ---------------------- = 0.893 moles H₂
2.016 grams
The Ideal Gas Law equation looks like this:
PV = nRT
In this equation,
P = pressure (atm) V = volume (L) n = moles R = Ideal Gas Constant (0.0821 L*atm/mol*K)T = temperature (K)After converting Celsius to Kelvin, you can put the given values into the equation and simplify to find the pressure.
P = ? atm R = 0.0821 L*atm/mol*K
V = 4.3 L T = 27 °C + 273.15 = 300.15 K
n = 0.893 moles
PV = nRT
P (4.3 L) = (0.893 moles) (0.0821 L*atm/mol*K)( 300.15 K)
P (4.3 L) = 22.0021
P = 5.12 atm
Therefore, The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
Learn more about Ideal gas here ;
https://brainly.com/question/8711877
#SPJ2
The world is made up of
Answer:
Explanation:
The world is made up of living beings .
write any two conditions at which a body of certain mass weightless
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity. If the body is falling only under the influence of gravity.
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity.If the body is falling only under the influence of gravity.
the text of oxygen gas in the laboratory
Explanation:in testing for oxygen a glowing splint is used.
the glowing splint is brought in the presence of the test tube containing the gas
the glowing splint rekindles or lights up showing that oxygen is present.
this is a positive test because oxygen supports burning or combustion
Describe weighted average
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
mention two factors which affect pressure due to liquid contained in a vessel
Answer:
depth of the liquid and nature of liquid affects the pressure due to liquid contained in a vessel
Answer:
Two factors influence the pressure of fluids. They are the depth of the fluid and its density. A fluid exerts more pressure at greater depths
When it’s summer in the northern hemisphere what Season is it in the Southern Hemisphere
Answer:
Winter
Explanation:
I dont know but whatev
Answer:
Winter
Explanation:
The seasonal cycle in the polar and temperate zones of one hemisphere is opposite to that of the other. Therefore, When it is summer in the Northern Hemisphere, it is winter in the Southern, and vice versa.
hope it helps :)
How many atoms of hydrogen are there in 36 g of NH4?
Answer:
hope it helps you
Explanation:
please like and mark me brainlist
I need help with question 5
Answer:
B a spring being stretched
Plants in forests take up carbon dioxide from the atmosphere during photosynthesis. They transform the carbon dioxide into plant material. When plants die, their organic matter is often worked into the soil by decomposers. Some of this organic matter remains within the soil and forest floor, and some of it is taken up by other living things.
Based on this information, what role do forests play in the carbon cycle?
A.
Forests are carbon sinks because they store carbon.
B.
Forests are carbon sinks because they do not absorb carbon dioxide when plants die.
C.
Forests are carbon sources because they emit carbon.
D.
Forests are carbon sources because they can be burned to emit carbon dioxide.
Answer: B. forests are carbon sinks because they store carbon
Explanation:forests take up carbon from the atmosphere through photosynthesis and from organic matter through decomposition. so, forests are carbon sinks because they store carbon
How many moles of KOH are there in 27.5 mL of 0.250 M KOH?
Question 2 options:
4.31 × 10−3 mol KOH
6.88 × 10−3 mol KOH
7.24 × 10−3 mol KOH
8.13 × 10−3 mol KOH
9.21 × 10−3 mol KOH
Answer:
6.88 × 10^-3mol
Explanation:
Molarity = number of moles (n) ÷ volume (V)
According to this question, there in 27.5 mL of 0.250 M KOH, the number of moles of KOH can, therefore, be calculated as follows:
number of moles = molarity × volume
Volume of KOH = 27.5mL = 27.5/1000
= 0.0275L
n = 0.0275 × 0.250
n = 0.006875 mol
n = 6.88 × 10^-3mol
A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.
Fl atomic number: 9
Fl atomic mass: 10
(ps i have two of these but can’t figure out the last)
Answer:
The number of electrons in the orbit is wrong they have to be 9 and not 10since flourine is in group 7 the number of electrons in the outer most shell has to be 7 and not 2the first shell has 8 instead of 2 electronsI hope this helps
QUICK CHECK
Use the periodic table to select which type of bond is present and which of the listed properties is most
likely for each substance.
Substance
Type of bond
Likely property
A А
B
A
Cuzm
Ba
lonic
DO
covalent
02
С
D
metallic
Answer:
Coppell zinc,ironic bond
Explanation:
lt will give away two zinc atoms
Answer:
I will go with Sodium chlorine NaCl
Which is another word for 10 meters in the metric system?
Answer:
Dekameter
Explanation:
Is this population more likely to grows slowly or quickly in the next 10 years
nobody can say it is uncertain but in my opinion it will grow quickly in the next 10 years
How are the vapor pressure and boiling point of alkynes affected as the chain length increases?
Answer:
Answer to the following question is as follows;
Explanation:
Alkynes' vapour pressure and normal boiling points are altered when chain length grows, since vapour pressure rises while boiling point falls.
Vapour pressure always include pressure entered by vapour with its condensed phase, pressure include molecules force of attraction include vapour
Which element has 2 valence electrons in the 2s sublevel?
Answer:
beryllium is the answer.
I hope this will help you
Is FeS iron (ll) sulfide or iron (lll) sulfide?
Answer:
the valence of S is -2. For FeS to be neutral the valence of Fe used must be +2
and since Iron (II) has its valency 2, FeS will be Iron (II) Sulfide.
True or false, The universal gas constant, R, is . 0821 when we use mm Hg as our unit for pressure
Answer:
False
Explanation:
R = gas constant = 0.0821 atm•L/mol•K
Hiii pls help me to write out the ionic equation
Answer:
STEP I
This is the balanced equation for the given reaction:-
[tex] 2KOH_{(aq)} + H_2SO_4{}_{(aq)} \rightarrow K_2SO_4{}_{(aq)} + 2H_2O_{(l)} [/tex]
STEP II
The compounds marked with (aq) are soluble ionic compounds. They must be
broken into their respective ions.
see, in the equation KOH, H2SO4, and K2SO4 are marked with (aq).
On breaking them into their respective ions :-
2KOH -> 2K+ + 2OH-H2SO4 -> 2H+ + (SO4)2-K2SO4 -> 2K+ + (SO4)2-STEP III
Rewriting these in the form of equation
[tex] \underline{\pmb{2K^+} }+ 2OH^- + 2H^+ + \pmb{\underline{{SO_4{}^{2-}}} \: \rightarrow \: \underline{\pmb{2K^+}}} + \underline{\pmb{SO_4{}^{2-}}} + 2H_2O [/tex]
STEP IV
Canceling spectator ions, the ions that appear the same on either side of the equation
(note: in the above step the ions in bold have gotten canceled.)
[tex] \boxed{ \mathfrak{ \red{ 2OH^-{}_{(aq)} + 2H^+{(aq.)} \rightarrow H_2O{}_{(l)}}}} [/tex]
This is the net ionic equation.
____________________________
[tex] \\ [/tex]
[tex]\mathfrak{\underline{\green{ Why\: KOH \:has\: been\: taken\: as\: aqueous ?}}} [/tex]
KOH has been taken as aqueous because the question informs us that we have a solution of KOH. by solution it means that KOH has been dissolved in water before use.[Alkali metal hydroxides are the only halides soluble in water ]
. The Ksp of barium sulfate is 1.1 × 10–10. What is the sulfate-ion concentration of a 1.0-L saturated solution of BaSO4 to which 0.025 mol of Ba(NO3)2 is added? 4.4 × 10–9M 1.0 × 10–5M 6.6 × 10–5M 2.8 × 10–12M
Answer:
[tex][SO_4^{2-}]=4.4*10^{-9}M[/tex]
Explanation:
From the question we are told that:
[tex]Ksp=1.1*10^{-10}[/tex]
Volume of [tex]SO_4^{2-}=1.O[/tex]
Moles of [tex]Ba(NO_3)^2 =0.025[/tex]
Generally the equation for Ksp is mathematically given by
[tex]Ksp=[Ba^{2+}][SO_4^{2-}][/tex]
[tex]1.1*10^{-10}=[0.025][SO_4^{2-}][/tex]
Therefore
[tex][SO_4^{2-}]=4.4*10^{-9}M[/tex]
HELP ME PLZ Which of the following describes the structure of a fish's swim bladder?
A. Expands and contracts to allow the fish to rise or sink in the water
B. Internal organ filled with liquid
c. Holds urine until it can be released into the environment
D. Internal organ filled with air sacs
What is the name of the molecule shown below?
A) ethanol
B) ethanal
C) ethanoic acid
D) ethylamine
The name of the molecule shown is Ethanol.
What is Ethanol?Ethanol is a alcoholic substance that is formed from fermentation of glucose in the presence of yeast or microorganisms.
It has a chemical group that have methyl group, hydroxyl group OH which is bonded to carbon atom.
Therefore, The name of the molecule shown is Ethanol.
Learn more about ethanol below.
https://brainly.com/question/13423304
#SPJ2
what is the molarity of HCL solution that has a density of 1.17g/ml at 25°?
Here, we have been given that;
$ \bf{1 ml}$ = 1.17 g$ \bf{1 l}$ = 1170 gHence, we can note that,
No. of moles of HCL (n) = $ \sf{\frac{1170}{36.5}}$(n) = 32.05
[tex] \\ [/tex]
Thus,
Molarity = 32.05 mg/LHence, molarity of the given solution will be 32.05 mg/L.
Over a period of 2 minutes, 180 coulombs of charge pass through a resistor. What is the current through the resistor during this time?
Type the correct answer in the box. Use numerals instead of words.
The current through the resistor during this time is
A.
Answer:
Explanation:
Formula
The current = charge / time
The charge is in coulombs
The time has to be in seconds.
1 minute = 60 seconds
2 minutes = 120 seconds.
charge = 180 coulombs
current = 180 / 120
current = 1.5 amperes.
