Answer:
The two types of waves are longitudinal and transverse
Explanation:
hope it helped! and i hope its correct
A 100 L ball is blown up inside at 200K. It is then taken outside in the hot sun, and the volume increases to 150 L. What is the new temperature?
Answer:
Temperature, T2 = 300 Kelvin
Explanation:
Given the following data;
Initial volume = 100 Liters
Initial temperature = 200 Kelvin
Final volume = 150 Liters
To find the final temperature T2, we would use Charles' law.
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
[tex] \frac {V}{T} = K[/tex]
[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making T2 as the subject formula, we have;
[tex] T_{2}= \frac{V_{2}}{V_{1}} * T_{1}[/tex]
Substituting into the formula, we have;
[tex] T_{2}= \frac{150}{100} * 200[/tex]
[tex] T_{2}= 1.5 * 200 [/tex]
Temperature, T2 = 300 Kelvin
Please Help Me!!!
Water is a colorless and odorless liquid. It can exist in solid, liquid, and gas states. It boils at 100 degrees C and melts at 0 degrees C.
Which option best describes this information?
A.
These are the physical properties of water.
B.
These are the chemical properties of water.
C.
These are the physical changes water undergoes.
D.
These are the chemical changes water undergoes.
E.
These are the molecular changes water undergoes.
Answer:
There are the molecular changes water undergoes
The half-life of technetium-99 is 6 hours.How much of a 100 milligram sample of
technetium-99 will remain after 30 hours? *
O 3.125 mg
O 12.5 mg
O 6.25 mg
O 1.56 mg
A 5 kg ball is sitting on top of a hill. It has a Potential Energy of 6000J. What is the height of the ball?
Explanation:
mass=5 kg
potential energy=6000j
height=?
Now
potential energy =m.g.h
or 6000=5*9.8*h
or 6000=49h
or 6000÷49=h
or h= 122.45m
A 2.5m long steel piano wire has a diameter of 0.5cm how great is the tention in the wire if it stretches by 0.45cm when tightened taking the young's modulus to be 2.0×10^11 N/m^2
Answer: Their u go i found it their was about 3 pages i did not no what pages u had to do.
Explanation:
The _____________ variable is observed, measured, and affected by the independent variable.
Answer: It would be the dependent variable.
Explanation:
The dependent variable is limited and can be affected by the changes and manipulation of the independent variable.
A squash ball with an initial velocity of 19.21 m/s [W] is hit by a squash racket, changing its velocity to 40.22 m/s [E] in 0.312 s. What is the squash ball’s average acceleration?
Acceleration = (change in velocity) / (time for the change)
Change in velocity = 59.43 m/s East
Time for the change = 0.312 s
Acceleration = 190.5 m/s^2 East
All waves change speed when they enter a new medium, but they don't always bend. When does bending occur?
An object is located 20.0 cm from a convex lens. The lens focuses light at a
distance of 10.0 cm. What is the image distance?
A. 6.67 cm
B. -6.67 cm
C. -20.0 cm
D. 20.0 cm
The Answer Is : D. 20.0 cm
My Reason : These types of problems can all be solved using the lens or mirror equation.
1/20 +1/q= 1/10
q=20 cm
The image is formed behind the lens at 2f or the center of curvature.
It is real, inverted, and the same size as the object
The Answer Is: D. 20.0 cm
Explanation: I did the test :)
Waves that move through space are called
Answer:
Electromagnetic waves are waves that can travel through matter or through empty space
Two resistors, 2.50 Ω and 4.95 Ω, are wired in series to a 12.00 V battery. What is the equivalent resistance of the circuit?
Answer:
7.45 Ω
Explanation:
From the question given above, the following data were obtained:
Resistor 1 (R₁) = 2.50 Ω
Resistor 2 (R₂) = 4.95 Ω
Voltage (V) = 12 V
Equivalent Resistance (Rₑq) =?
Since the resistors are in series arrangement, the equivalent resistance can be obtained as follow:
Rₑq = R₁ + R₂
Rₑq = 2.5 + 4.95
Rₑq = 7.45 Ω
Therefore, the equivalent resistance is 7.45 Ω
Friction and air resistance are forces that always:
1.) Balance out, having no effect on the net force.
2.) Act in the opposite direction to an object's motion, tending to slow it down.
3.) Pull objects down towards the center of the Earth.
4.) Cause objects to speed up.
A 20 g block of ice is cooled to −65 ◦C. It
is added to 570 g of water in an 76 g copper
calorimeter at a temperature of 26◦C.
Find the final temperature. The specific
heat of copper is 387 J/kg ·
◦C and of ice is
2090 J/kg ·
◦C . The latent heat of fusion of
water is 3.33 × 10^5
J/kg and its specific heat
is 4186 J/kg ·
◦C .
Answer in units of ◦C.
Answer:
The final temperature is approximately 23.55°C
Explanation:
The given parameters are;
The mass of the ice block, m₁ = 20 g
The initial temperature of the block, T₁ = -65°C
The mass of the water to which the block is added, m₂ = 570 g
The mass of the copper container containing the water, m₃ = 76 g
The initial temperature of the water and the copper, T₂ = 26°C
The specific heat capacity of copper, c₃ = 387 J/(kg·°C)
The specific heat capacity of ice, c₄ = 2,090 J/(kg·°C)
The latent heat of fusion of ice, l = 3.33 × 10⁵ J/kg
The specific heat capacity of water, c₁ = 4,186 J/(kg·°C)
We have;
ΔQ = m₁·c₁·ΔT + m₁·l = m₂·c₂·ΔT + m₃·c₃·ΔT
Therefore, we get;
20 × 2,090 × -65 + 20 × 3.33 × 10⁵ + 20 × T × 4,186 = 570 × 4,186 × (26 - T) + 76 × 387 × (26 - T)
Using a graphing calculator, we get;
83720·T + 3943000 = 62801232 - 2415432·T
The final temperature, T ≈ 23.55 °C
A mass weighing pounds is attached to a spring whose constant is lb/ft. The medium offers a damping force that is numerically equal to the instantaneous velocity. The mass is initially released from a point foot above the equilibrium position with a downward velocity of ft/s. Determine the time at which the mass passes through the equilibrium position. Find the time at which the mass attains its extreme displacement from the equilibrium position. What is the position of the mass at this instant
Answer:
hello your question has some missing values attached below is the complete question with the missing values
answer :
a) 0.083 secs
b) 0.33 secs
c) 3e^-4/3
Explanation:
Given that
g = 32 ft/s^2 , spring constant ( k ) = 2 Ib/ft
initial displacement = 1 ft above equilibrium
mass = weight / g = 4/32 = 1/8
damping force = instanteous velocity hence β = 1
a)Calculate the time at which the mass passes through the equilibrium position.
time mass passes through equilibrium = 1/12 seconds = 0.083
b) Calculate the time at which the mass attains its extreme displacement
time when mass attains extreme displacement = 1/3 seconds = 0.33 secs
c) What is the position of the mass at this instant
position = 3e^-4/3
attached below is the detailed solution to the given problem
Define the types of friction and give FOUR examples of each
Static Friction
Rolling Friction
Sliding Friction
Fluid Friction
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 23pts-
Answer:
B is the answer!!
Explanation:
how fossils influence and change our understanding of the history of Earth and it's species.
Answer:
Fossils are the preserved remains or traces of animals, plants, and other organisms from the past. Fossils are important evidence for evolution because they show that life on earth was once different from life found on earth today.
Explanation:
A meter is larger than a
A.
hectometer
B.
kilometer
C.
decimeter
D.
dekameter
The Doppler Effect is caused by which of the following?
Select all that apply…
A - motion of the source
B - the type of wave
C - original frequency of the source
D - motion of the observer
E - type of medium the wave is in
Answer:
the type of wave
Explanation:
Description: Doppler Effect works on both light and sound objects. For instance, when a sound object moves towards you, the frequency of the sound waves increases, leading to a higher pitch. Conversely, if it moves away from you, the frequency of the sound waves decreases and the pitch comes down.
Light waves are
A.rotating waves.
B.longitudinal waves.
C.circular waves.
D.transverse waves
SHOCKING
Explanation:
Answer:
D i promises.
Explanation:
light waves can go 2 direction
How can seismographs be used to predict hurricane intensity?
Answer: The earth is a noisy place. Seismometers, which measure ground movements to detect earthquakes, volcanic eruptions, and manmade explosives, are constantly recording smaller vibrations caused by ocean waves, rushing rivers, and industrial activity.
Explanation:
Which type of map best shows the three dimensions of Earth’s surface?
Answer:
please give me brainlist and follow
Explanation:
topographic map
A topographic map shows a three-dimensional representation of a flat surface. It has contour lines joining points of equal elevation; the closer the lines are the steeper the elevation is.
Static electricity is an excess of charge.
A. True
B. False
Answer:
Its true
Explanation:
Three people push a piano on wheels with forces of 130 N to the right, 150 N to the left, and 165 N to the right. What is the strength and direction of the net force on the piano?
Answer:
45 N to the right possibly?
Which describes the motion in a convection current? horizontal motion only vertical motion only linear motion circular motion
Answer:
circular motion
Explanation:
Circular motion can be regarded as
movement of particular object along the circumference in a circle. It is
rotation of particular object along a circular path. Circular motion could be
uniform, along with constant angular rate of rotation as well as constant speed. It could also be non-uniform along with changing rate of rotation. The acceleration that is been experienced when one is in uniform circular motion is called"Centripetal acceleration"
Convection currents is type of current that takes place after a reservoir of fluid has been heated at the bottom, then cool at the top.the fluid expand as a result of Heat , then density decreases, the plates on top of them is been carried as a result of circular motion of the convection
A convention current is a circular movement which is set up due to temperature difference between two layers of a fluid.
What is a convection current?A convention current is a movement which is set up due to temperature difference between two fluids.
Convection currents are set up in liquids and gases.
Hotter and less dense fluids move upwards while colder and denser fluids move downwards.
Therefore, convection currents involve circular motion.
Learn more about convection currents at: https://brainly.com/question/25957304
SE UM CORPO ELETRICAMENTE NEUTRO É CARREGADO COM PROTONS, entao afirmamos; a) fica carregado negativamente b) fica carregado só com cargas positivas c) fica carregado positivamente d) fica com excesso de eletrons e) continua eletricamente neutro
Answer:
c) It gets positively charged
Explanation:
If an electrically neutral body is loaded with protons so it gets positively charged because proton has positive charge. When the protons is added to the neutral body, it can't remain neutral because the quantity of positive charges increases in the nucleus and it gets positively charged while on the other hand, the atom from which protons are taken will acquire negative charge due to presence of more number of electrons and we know that electrons has negative charge.
Give 1 real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant. Describe how it is an example of impulse and how force and time are involved.
Answer:
On real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant is when making a serve with a lawn tennis racket
How It is an example of impulse is that when a serve is made by moving the bat slowly, the lawn tennis player uses less force and the ball is in contact with the string for longer a period
When however, the lawn tennis player moves the racket faster, with the strings of the racket highly tensioned he uses more force and the ball also spends less time on the racket to produce the same momentum
Explanation:
The impulse of a force, ΔP is given by the following formula;
ΔP = F × Δt
Where ΔP is constant, we have;
F ∝ 1/Δt
Therefore, for the same impulse, when the force is increased, the time of contact is decreases and vice versa.
Which of the following scenarios would result in an increase of kinetic
energy?*
A) An object at rest at a height of 10 meters
B) A car accelerating from 10 m/s to 20 m/s
C) A car coming to a stop
Answer:
B) A car accelerating from 10 m/s to 20 m/s
Explanation:
I explained this yesterday.
Blackie, a cat whose mass is 6-kg, is napping on top of the refrigerator when he rolls over and fall. Blackie has a KE of 90-J just before he lands on his feet on the floor.
How tall is the refrigerator?
To answer this question, you need to understand the law of conservation of energy. Essentially, the law states that energy cannot be created or destroyed; it is always conserved.
Knowing this law, how can we answer this question? Well, let's look at what the question tells us. We know that Blackie was initially at the top of a refrigerator before rolling over and falling to the ground. At ground level, he only has Kinetic energy when he lands. Since we know that he started at the top of the fridge, we know that Blackie started off with potential gravitational energy.
That would make sense, right? Written out as an equation, it'd be:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
This follows the law of conservation of energy, as all the potential gravitational energy is converted into Kinetic energy.
Now, we know what energies are converted. What can we do with it? Recall the equation of potential gravitational energy:
[tex]U_{g}[/tex] = [tex]F_{g}[/tex]∆H
[tex]U_{g}[/tex] = mg∆H
Do you see it now? ∆H is the distance that Blackie falls, and since Blackie jumps from the fridge to the ground, ∆H must be the height of the fridge!
Let's start solving for ∆H:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
Substitute potential gravitational energy with our equation:
mg∆H = [tex]K_{E}[/tex]
We were given the value of Kinetic Energy:
mg∆H = 90
Isolate ∆H by dividing both sides by mg:
∆H = [tex]\frac{90}{mg}[/tex]
Input values for 'm' and 'g' (m is the mass of Blackie and g is Earth's acceleration)
∆H = [tex]\frac{90}{6*9.80}[/tex]
∆H = [tex]\frac{90}{58.8}[/tex]
∆H = 1.53
The refrigerator is 1.53 meters tall.
And that's it! Let me know if you need me to explain anything I did here.
- breezyツ
An object has a weight of 1550N when it is on the surface of a planet of radius R. What will be the gravitational force on the object after it has been moved to a distance of 4R from the surface of the planet?
Answer:
W = 96.875 N
Explanation:
For this exercise let's use the law of universal gravitation
F = [tex]G \frac{m M }{r^2}[/tex]
we substitute this force in Newton's second law
F = m a
G \frac{m M }{r^2} = m a
a = [tex]G \frac{M}{r^2}[/tex]
This sidewalk we will call it gravity acceleration
g₀ = a
the weight of a body is
W₀ = m g₀
if we change the cario of r ’= 4r
a’= [tex]G \frac{M}{r'^2 }[/tex]
a ’= G \frac{M}{(4r)^2 }
a' = [tex]G \frac{M}{r^2} \ \frac{1}{16}[/tex]
a ’= [tex]\frac{g_o}{16}[/tex]
therefore the weight of the body must be
W = m g = [tex]m \ \frac{g_o}{16}[/tex]
W = W₀ / 16
W = 1550/16
W = 96.875 N
