30 points to help me!

Correct Option is Shifted 2 units left and 4 units up

A triangle is a geometric shape that is formed by three straight line segments that connect three non-collinear points. The three points where the segments intersect are called the vertices of the triangle, while the segments themselves are called the sides. The area enclosed by the sides of the triangle is called its interior, while the space outside the triangle is called its exterior.

The vertices of ABC are (4, 6), (7, 6), and (5,9)

The transformed image A'B'C' has vertices as

(2,10) (5,10) (3,13)

We see a pattern when we compare the matching vertices.

The y coordinate is raised by 4, while the x coordinate is shrunk by 2.

This implies the transformation is

Shifted 2 units left and 4 units up

To know more about line, visit:

https://brainly.com/question/30003330

#SPJ1

Answer:

Shifted 2 units left and 4 units up

Step-by-step explanation:

hope this helps

The probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793 and the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057 and the probability in part (b) is much higher because the standard deviation is smaller for the x distribution.

What do you mean by normally distributed data?

In statistics, a normal distribution is a probability distribution of a continuous random variable. It is also known as a Gaussian distribution, named after the mathematician Carl Friedrich Gauss. The normal distribution is a symmetric, bell-shaped curve that is defined by its mean and standard deviation.

Data that is normally distributed follows the pattern of the normal distribution curve. In a normal distribution, the majority of the data is clustered around the mean, with progressively fewer data points further away from the mean. The mean, median, and mode are all the same in a perfectly normal distribution.

Calculating the given probabilities :
(a) The probability that an 18-year-old man selected at random is between 70 and 72 inches tall can be found by standardizing the values and using the standard normal distribution table. First, we find the z-scores for 70 and 72 inches:

[tex]z-1 = (70 - 71) / 5 = -0.2[/tex]

[tex]z-2 = (72 - 71) / 5 = 0.2[/tex]

Then, we use the table to find the area between these two z-scores:

[tex]P(-0.2 < Z < 0.2) = 0.0793[/tex]

So the probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793.

(b) The mean height of a sample of eight 18-year-old men can be considered a random variable with a normal distribution. The mean of this distribution will still be 71 inches, but the standard deviation will be smaller, equal to the population standard deviation divided by the square root of the sample size:

[tex]\sigma_x = \sigma / \sqrt{n} = 5 / \sqrt{8} \approx 1.7678[/tex]

To find the probability that the sample mean height is between 70 and 72 inches, we standardize the values using the sample standard deviation:

[tex]z_1 = (70 - 71) / (5 / \sqrt{8}) \approx -1.7889[/tex]

[tex]z_2 = (72 - 71) / (5 / \sqrt{8}) \approx 1.7889[/tex]

Then, we use the standard normal distribution table to find the area between these two z-scores:

[tex]P(-1.7889 < Z < 1.7889) \approx 0.9057[/tex]

So the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057.

(c) The probability in part (b) is much higher because the standard deviation is smaller for the x distribution. When we take a sample of eight individuals, the variability in their heights is reduced compared to the variability in the population as a whole. This reduction in variability results in a narrower distribution of sample means, with less probability in the tails and more probability around the mean. As a result, it becomes more likely that the sample mean falls within a given interval, such as between 70 and 72 inches.

To know more about normal distribution visit :

brainly.com/question/29509087

#SPJ1

The perimeter of the smaller triangle would be = 28.1

A triangle can be defined as a three sided polygon that has a total internal angle of 180°.

To calculate the perimeter of the triangle is to find out the scale factor that exists between the two triangles.

The formula for scale factor = original object/new object

Scale factor= 8/7 = 1.14

The perimeter of the smaller triangle = 32/1.14

= 28.1.

Learn more about perimeter here:

https://brainly.com/question/25092270

#SPJ1

a 12 cm tall and radius of 10 cm cylinder is filled with 10 cm of water.

a) Rotational speed at which the water just touches the bottom of the cylinder:

                  We will use the formula for centripetal force for a liquid with the volume of a cylinder to obtain the rotational speed at which the water just touches the bottom of the cylinder.

         The formula for centripetal force for a liquid with the volume of a cylinder is as follows:

                   F = (ρr²πh)ω²WhereF:

   Centripetal forceρ: Densityr: Radiush : Heightω: Rotational speed Substituting the given values,

we get: F = (1000 kg/m³ × (0.1m)² × π × 0.12m)ω²F

                = 377 Nω

                = √(F/m)ω

                = √(377 N/ 10 kg)ω

                = √37.7ω = 6.14 rad/sb)

      Pressure at points A and B:

                                We will use the formula for hydrostatic pressure for a liquid to calculate the pressure at points A and B. The formula for hydrostatic pressure for a liquid is as follows:

                         P = ρgh

  Where,

           P: Pressureρ: Densityg: Acceleration due to gravity: DepthSubstituting the given values for point A,

we get P = 1000 kg/m³ × 9.8 m/s² × 0.1 mP

                = 980 Pa

        Substituting the given values for point B,

we get P = 1000 kg/m³ × 9.8 m/s² × 0.22 mP

                = 2156 Pa

      The resulting pressure at point A is 980 Pa and the resulting pressure at point B is 2156 Pa.

#SPJ11

Learn more about the rotational speed of the cylinder at: https://brainly.com/question/13988154

we have

13x+6y=−30------------- > 6y=-30-13x--------------- > y=(-30-13x)/6

x−2y=−4-- > 2y=x+4-------- > y=(x+4)/2

Using a graphing tool---------- > see attached figure

the solution of the system is the point (-2.625,0688)

the best estimate pair for the solution to the system is (−2.5, 0.75)

Answer:

Step-by-step explanation:

Let h be the height of the trapezoid.

The area of a trapezoid is given by the formula:

Area = (1/2) × (sum of parallel sides) × (height)

In this case, we know that the area is 21 cm², one base length is 5 cm, and the other base length is 9 cm. So we can write:

21 = (1/2) × (5 + 9) × h

Simplifying this equation, we get:

21 = 7h

Dividing both sides by 7, we get:

h = 3

Therefore, the height of the trapezoid is 3 cm.

Answer:

Step-by-step explanation:

Area of Trapezium is 21 cm². Parallel sides are 5 cm and 9 cm .

Shorter parallel side is 5 cm and the Longer Side is 9 cm.

As we know that formula of area of Trapezium is,

Where,

On substituting the values of area and the two parallel sides in the above formula we will get the required Height.

Substituting the values,

21 = ½ (5 + 9)h

21 = ½ × 14 × h

21 = 7 × h

h = 21/7

h = 3 cm

Therefore, Height of the Trapezium will be 3 cm respectively.

Answer:

10

Step-by-step explanation:

Based on the given conditions, formulate: 40x16 divided by 64

Cross out the common factor: 40/4

Cross out common factor: 10

Get the result

Answer: 10

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

We have,

To find the work required to pump all the water out of the rectangular swimming pool, we can use the concept of work as the force multiplied by the distance.

First, let's calculate the weight of the water in the pool.

The weight of an object is given by the formula:

Weight = mass x gravitational acceleration

Since the density of water is given as 1 lb/ft³, we need to find the volume of water in the pool.

The volume of the pool is given by the formula:

Volume = length x width x depth

Volume = 50 ft x 30 ft x 6 ft = 9000 ft³

Now, let's calculate the weight of the water:

Weight = density x volume x gravitational acceleration

Weight = 1 lb/ft³ x 9000 ft³ x 32.2 ft/s² ≈ 290,400 lb

To pump all the water out over the top, we need to raise it to the height of the pool, which is 8 ft.

The work required to pump the water out is given by the formula:

Work = weight x height

Work = 290,400 lb x 8 ft = 2,323,200 ft-lb

Therefore,

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ12

According to Moore's Law, the number of transistors that can be placed inexpensively on a silicon chip doubles every two years, a typical CPU contained about 1,000,000 transistors in 1990.

Let’s first calculate the number of doublings from 1990 to 2000. Number of years from 1990 to 2000 = 2000 - 1990 = 10 yearsDoublings from 1990 to 2000 = [tex]$\dfrac{10 \text{ years}}{2 \text{ years per doubling}} = 5$[/tex] doublingsNow, we can calculate the number of transistors in a typical CPU in the year 2000:

[tex]$$\begin{aligned} \text{Number of transistors in 2000} &= \text{Number of transistors in 1990} \times 2^{\text{number of doublings}} \\ &= 1,\!000,\!000 \times 2^5 \\ &= 32,\!000,\!000 \end{aligned}$$[/tex]

Therefore, a typical CPU contained about 32,000,000 transistors in the year 2000.

See more about number of transistors at: https://brainly.com/question/29398026

#SPJ11

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Step-by-step explanation:

Answer:

I'm sorry, your question is not clear. Please provide more information or context so I can better understand what you are asking.

Step-by-step explanation:

Answer:

The answer to 1 + 1 is 2.

Very complicated problem, please mark brainliest!

Answer:

1+1 = 2

Or, 1=2-1

1=1

we know value of one is one

so,

1+1=11

The slope of a linear equation is an important skill to have, as it can be used to identify the rate of change of the equation, and can be used to predict future values of the equation.

An equation is an expression that states the equality of two things. It typically consists of an equal sign (=) and two expressions on either side of the equal sign that represent the same thing. Equations are used to describe relationships between different variables and can be used to solve mathematical problems. They can also be used to show the relationships between different quantities in physics and chemistry.

a)The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 6, and the run is 2, so the slope is 3.

b) The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 3, and the run is -7, so the slope is -3/7.

c) The slope of this linear equation can be determined by using the slope formula, which is rise over run. In this equation, the rise is 4, and the run is 6, so the slope is 2/3.

Finding slope in tables and graphs is a common mathematical skill that is used to identify the rate of change of a linear equation. This is determined by finding the change in the dependent variable (the y-axis) divided by the change in the independent variable (the x-axis). This is what is referred to as the slope of the equation. To find the slope in tables and graphs, you must look at the differences between the points on the x-axis and y-axis, and divide the change in the y-axis by the change in the x-axis. This will give you the slope of the equation. Finding the slope of a linear equation is an important skill to have, as it can be used to identify the rate of change of the equation, and can be used to predict future values of the equation.

To know more about equation click-
https://brainly.com/question/2972832
#SPJ1

The utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.

The bottleneck resource in this process is the hand-dry step, as it is the only step that is performed manually and thus has limited capacity. The processing time for the hand-dry step is 6 minutes per car, which is longer than any of the other steps.

To calculate the flow rate of the process, we need to determine the cycle time, which is the time it takes to process one car through all the steps. The cycle time is the sum of the processing times for all the steps, which is 2 + 7 + 1 + 4 + 6 = 20 minutes per car.

To convert this to customers per hour, we divide the number of minutes per hour (60) by the cycle time: 60 / 20 = 3 customers per hour.

Therefore, the flow rate of the process is 14 cars per hour x 3 customers per hour = 42 customers per hour.

To calculate the utilization of the machines, we need to calculate the total time that the machines are processing cars. Since all the steps except for the hand-dry step are performed by dedicated machines, the total processing time for the machines is 2 + 7 + 1 + 4 = 14 minutes per car.

Therefore, the utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.

For more questions like Machines click the link below:

https://brainly.com/question/30695896

#SPJ11

Consequently, the area of triangle $AMN$ is equal to $A = \frac{1}{2}bh = \frac{1}{2}(4)(2) = 4$ cm2.

The area of triangle $AMN$ in square $ABCD$ can be calculated using the formula for area of a triangle, $A = \frac{1}{2}bh$, where $b$ is the length of the base and $h$ is the height of the triangle.

Since side $BC$ has a length of 4 cm, we can determine that $N$ is located 2 cm away from point $B$ and 2 cm away from point $C$.

Similarly, we can conclude that $M$ is located 2 cm away from point $C$ and 2 cm away from point $D$.

Therefore, the base of triangle $AMN$ is equal to 4 cm, and the height of triangle $AMN$ is equal to 2 cm.

for such more questions on Consequently

https://brainly.com/question/26182883

#SPJ11

Answer:

[tex]\bf a^2* (a - 0.4)(a^2 + 0.4a + 0.16)[/tex]

Step-by-step explanation:

Factorize:

 First take out the common term a².

[tex]a^5 - 0.064a^2= a^2*(a^3 - 0.064)\\\\[/tex]

Now, factorize using the identity a³ - b³

a³ - b³ = (a - b) (a²  + ab + b²)

[tex]a^2 * (a^2 - 0.064) = a^2 * (a^3 - 0.4^3)[/tex]

                          [tex]= a^2 * (a - 0.4) * (a^2 + a*0.4 + 0.4^2)\\\\=a^2 * (a - 0.4)(a^2 + 0.4a + 0.16)[/tex]

(a) The recursive formula for An is: An = (1.015)An-1 - 100.

(b) The explicit formula for An in summation notation is: An = 4000(1.015)^n - 100[1 + (1.015) + (1.015)^2 + ... + (1.015)^(n-1)].

(a) This formula says that to find the balance for month n, we take the balance for month n-1, multiply it by 1.015 (to account for the interest rate), and subtract 100 (to account for the withdrawal). This formula is consistent with the results for n=1,2,3 on the previous page.

(b) The explicit formula for An in summation notation is: An = 4000(1.015)^n - 100[1 + (1.015) + (1.015)^2 + ... + (1.015)^(n-1)].

This formula says that to find the balance for month n, we take the starting balance of 4000 multiplied by the interest rate raised to the power of n, and then subtract the sum of 100 multiplied by the geometric series (1 + r + r^2 + ... + r^(n-1)), where r = 1.015. This formula is consistent with the results for n=1,2,3 on the previous page.

For more questions like Recursive formula click the link below:

https://brainly.com/question/8972906

#SPJ11

Answer:

-21

Step-by-step explanation:

y^2 + 8y - 9                       y = -6

(-6)² + 8(-6) - 9

36 - 48 - 9

-21

So, the answer is -21

Answer:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Step-by-step explanation:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Answer:

Step-by-step explanation:

The answer is true

For point, p divides the directed line segment xy so that the ratio of xp to py is 3 to 5 correct option is d. Point R is three-fifths of the way from point P to point Y along PY.

The directed line segments divide a line into ratios, and each ratio has different properties. The properties of ratios of points on a line are dependent on the way the line is divided. For instance, suppose point p divides the directed line segment xy so that the ratio of xp to py is 3 to 5. We can describe point r that divides the directed line segment yx so that the ratio of yr to rx is 5 to 3 as follows:
We can solve this problem using the concept of directed line segments and the properties of ratios of points on a line.

Since P divides the directed line segment XY in the ratio 3:5, we can write:

XP = (3/8)XY and PY = (5/8)XY

Now, let's consider the directed line segment YX. We want to find a point R on this segment such that YR:RX = 5:3.

We can express YR and RX in terms of XY using the fact that YX = -XY:

YR = (5/8)YX and RX = (3/8)YX

Substituting -XY for YX, we get:

YR = (-5/8)XY and RX = (-3/8)XY

To find the location of point R, we need to find the distance from Y to R along the directed line segment YX. We can do this by adding the distances from Y to P and from P to R:

YR = YP + PR

Using the ratios we derived earlier, we can express YP and PR in terms of XY:

YP = PY = (5/8)XY

PR = R - P = (3/8)XY - (3/8)XY = 0

Therefore, YR = (5/8)XY + 0 = (5/8)XY

This means that point R is located at a distance of 5/8 of the length of YX from Y. So, the correct answer is (d) Point R is three-fifths of the way from point P to point Y along PY.

To know more about the "directed line segment": https://brainly.com/question/12959377

#SPJ11

The measure of ∠J in ΔJKL is approximately 57.5 degrees.

The measure of ∠J in ΔJKL can be found using the trigonometric function tangent, which is defined as the ratio of the opposite side to the adjacent side.

The straight line that "just touches" the plane curve at a given point is called the tangent line in geometry. It was defined by Leibniz as the line that passes through two infinitely close points on the curve.

tan(∠J) = JK/KL

tan(∠J) = 7.3/4.7

∠J = arctan(7.3/4.7)

∠J = 57.5 degrees (rounded to the nearest tenth of a degree)

Therefore, the measure of ∠J in ΔJKL is approximately 57.5 degrees.

Learn more about Triangles

https://brainly.com/question/27996834

#SPJ4

The interval does not include the null hypothesis value, then the results are significant.

When calculating a confidence interval for the difference between two means or proportions, the significance level must be considered to determine whether the results suggest a significant difference.What is a confidence interval?A confidence interval (CI) is an interval estimate that quantifies the uncertainty associated with the unknown population parameter. Confidence intervals are used to express how confident we are about the accuracy of an estimated population parameter.The significance level is the level at which the results of a statistical test are considered statistically significant. The significance level is frequently represented as alpha, and its value is usually set to 0.05 (5%) in most statistical analyses. This implies that there is a 5% chance that the statistical test findings will indicate a significant difference when, in fact, there is no such difference. The significance level is the probability of rejecting a true null hypothesis.Therefore, in order to determine whether or not the results of a confidence interval for the difference between two means or proportions indicate a significant difference, we must compare the interval with the significance level (alpha) that was established before the test. If the interval contains the null hypothesis value (usually 0), then the results are not significant. If the interval does not include the null hypothesis value, then the results are significant.

Learn more about Hypothesis

brainly.com/question/20165896

#SPJ11

Answer:

"9 more than A" is a verbal expression.

intersection of A and B events, P(A ∩ B) is 0. So, P(A U B) = P(A) + P(B) = 0.3 + 0.6 = 0.9Hence, P(AUB) = 0.9.

Probability of P(ANC)We know that events A, B and C are mutually exclusive.

Therefore, if A, B, and C are mutually exclusive events, then P(A U B U C) = P(A) + P(B) + P(C). Given, P(A) = 0.3,P(B) = 0.6,P(C) = 0.1

Therefore, P(A U B U C) = P(A) + P(B) + P(C) = 0.3 + 0.6 + 0.1 = 1Now, P(ANC) = 1 - P(A U B U C) = 1 - 1 = 0

Probability the intersection of A and B events, P(A ∩ B) is 0. So, P(A U B) = P(A) + P(B) = 0.3 + 0.6 = 0.9

Hence, P(AUB) = 0.9.ility of P(AUB)We know that events A, B and C are mutually exclusive.

Therefore, if A, B, and C are mutually exclusive events, then P(A U B U C) = P(A) + P(B) + P(C)

Now, we need to find P(AUB). If two events A and B are not mutually exclusive events, then the probability of their union P(A U B) can be found as follows; [tex]P(A U B) = P(A) + P(B) - P(A ∩ B)[/tex]We know that events A, B and C are mutually exclusive.

for such more questions on Probability

https://brainly.com/question/24756209

#SPJ11

The distribution is skewed to the right.

If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.

This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.

The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.

Learn more about skewed distribution

brainly.com/question/1604092

#SPJ11

The total value of both bonds is $704,367,500.

Coupon payment = [tex]\frac{Coupon rate * Par value}{2}[/tex]

Coupon payment = [tex]\frac{11 * $1,000}{2}[/tex]

Coupon payment = $55

PV = [tex]55 * [1 - (1 + 0.04)^{^-40} ] / 0.04 + $1,000 / (1 + 0.04)^40[/tex]

[tex]PV = $1,026.45[/tex]

[tex]Total value = PV * Number of bonds * Par value\\Total value = $1,026.45 * 150,000 * $1,000\\Total value = $153,967,500[/tex]

[tex]PV = \frac{Price}{(1 + r)^n}[/tex]

[tex]PV = \frac{16}{(1 +0.03)^60}\\PV = $1.72[/tex]

[tex]Total value = PV * Number of bonds * Par value\\Total value = $1.72 * 320,000 * $1,000\\Total value = $550,400,000[/tex]

Therefore, the total value of both bonds is:

[tex]Total value = Value of coupon bonds + Value of zero coupon bonds\\Total value = $153,967,500 + $550,400,000\\Total value = $704,367,500[/tex]

A coupon rate is the annual interest rate paid by a bond or other fixed-income security to its bondholders or investors. It is typically expressed as a percentage of the bond's face value, also known as its par value. For example, if a bond has a face value of $1,000 and a coupon rate of 5%, the bond will pay $50 in interest each year to its bondholders. The coupon payments are usually made semi-annually or annually, depending on the terms of the bond.

The coupon rate is set when the bond is issued and remains fixed throughout the life of the bond unless the bond issuer chooses to call the bond or the bond defaults. Coupon rates are determined by a variety of factors, including market conditions, the creditworthiness of the issuer, and the length of the bond's maturity.

To learn more about Coupon rates visit here:

brainly.com/question/29765779

#SPJ4

Complete Question: -

The IPO Investment Bank has the following financing outstanding,

Debt: 150,000 bonds with a coupon rate of 11 percent and a current price quote of 108; the bonds have 20 years to maturity. 320,000 zero coupon bonds with a price quote of 16 and 30 years until maturity. Both bonds have a par value of $1,000 and semiannual coupons.

Preferred stock: 240,000 shares of 9 percent preferred stock with a current price of $67, and a par value of $100.

Common stock: 3,500,000 shares of common stock; the current price is $53, and the beta of the stock is.9.

Market: The corporate tax rate is 24 percent, the market risk premium is 8 percent, and the risk-free rate is 5 percent.

What is the WACC for the company? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.)

The sum of the geometric series is 3904/3125.

By using the formula for the sum of a geometric series, we'll have to identify the first term, the common ratio, and the number of terms.

Let's identify the first term, the common ratio, and the number of terms in the given series as shown below;

The first term, a = 4³/5³

Common ratio, r = 4/5

The number of terms, n = 3

We have identified the values of a, r, and n, we can now substitute them into the formula for the sum of a geometric series, shown below;

S_n = a(1 - rⁿ) / (1 - r)

S₃ = {(4³/5³) [1 - (4/5)³]} / [1 - (4/5)]

S₃ = {(64/125) [1 - (64/125)]} / [1/5]

S₃ = (64/125) [(125-64)/125] [5/1]

S₃ = (64/125) (61/125) (5)

Therefore, S₃ = 3904/3125.

Thus, the sum of the geometric series (4³/5³) + (4⁴/5⁴) + (4⁵/5⁵) is equal to 3904/3125.

To know more about the "geometric series": https://brainly.com/question/24643676

#SPJ11

Answer:

Step-by-step explanation:

       [tex]x^2-5=-7x-1[/tex]

[tex]x^2+7x-5=-1[/tex]         (subtracted 7x from both sides of the equation)

[tex]x^2+7x-4=0[/tex]            (+1 both sides)

Use quadratic formula to solve for x:

   [tex]x=\frac{-b \pm \sqrt{b^2 - 4ac} }{2a}[/tex]     where [tex]a=1,b=7,c=-4[/tex]

       [tex]=\frac{-7 \pm \sqrt{7^2 - 4\times1\times(-4)} }{2\times 1}[/tex]

       [tex]=\frac{-7 \pm \sqrt{49 +16} }{2}[/tex]

        [tex]=\frac{-7 \pm \sqrt{65} }{2}[/tex]

     [tex]x=\frac{-7 +\sqrt{65} }{2},\frac{-7 - \sqrt{65} }{2}[/tex]

     [tex]x=0.53,-7.53[/tex]

An interval is a set of real numbers that contains all real numbers lying between any two numbers of the set.

For each calculation, the smallest interval in which the result, using true instead of rounded values, must lie is as follows:

(a) 1.1062+0.947 = 2.0532 ≤ true result ≤ 2.053

(b) 23.46 - 12.753 = 10.707 ≤ true result ≤ 10.708

(c) (2.747) (6.83) = 18.6181 ≤ true result ≤ 18.6182

(d) 8.473/0.064 = 132.3906 ≤ true result ≤ 132.3907

To learn more about the “smallest interval” refer to the: https://brainly.in/question/52697950

#SPJ11

Answer:

The sum of the first n terms in an arithmetic sequence is (n/2)⋅(a₁+aₙ). It is called the arithmetic series formula.

Step-by-step explanation:

An arithmetic series is the sum of the terms in an arithmetic sequence with a definite number of terms. Following is a simple formula for finding the sum: Formula 1: If S nrepresents the sum of an arithmetic sequence with terms , then. This formula requires the values of the first and last terms and the number of terms.

Please mark me as Brainliest if possible! Thank you :)