Answer:
Step-by-step explanation:
To find the total length of both pieces of fabric in centimeters, we need to add the length of the first piece of fabric (142 cm) and the length of the second piece of fabric (2 meters).
However, we need to make sure that the units are consistent before we add the lengths. We can convert the length of the second piece of fabric from meters to centimeters by multiplying by 100. Therefore, the total length in centimeters is:
142 cm + 2 meters * 100 cm/meter = 142 cm + 200 cm = 342 cm
The option that correctly gives the answer is "Multiply 2 by 100, then add 142" (Option C).
in one of his experiments conducted with animals, thorndike found that cats learned to escape from a puzzle box:
In one of his experiments conducted with animals, Thorndike found that cats learned to escape from a puzzle box is increased gradually
To quantify the learning process, Thorndike used a mathematical formula known as the Law of Effect equation. The equation is:
B = f(log S1/S2)
where B represents the strength of the behavior, S1 represents the satisfaction of the positive consequence, and S2 represents the degree of frustration or negative consequence.
In the context of Thorndike's puzzle box experiment, the Law of Effect equation can be used to describe how the cat's behavior changed over time as it learned to escape the puzzle box more quickly and efficiently. Initially, the cat's behavior was weak because it did not know which actions would lead to a positive outcome.
To know more about puzzle box here
https://brainly.com/question/30470834
#SPJ4
During a manufacturing process, a metal part in a machine is exposed to varying temperature conditions. The manufacturer of the machine recommends that the temperature of the machine part remain below 131°F. The temperature T in degrees Fahrenheit x minutes after the machine is put into operation is modeled by T=-0.005x^2+0.45x+125. Will the temperature of the part ever reach or exceed 131°F? Use the discriminant of a quadratic equation to decide.
answer options
1. No
2. Yes
From the discriminant of the give quadratic equation, the temperature of the machine will part after 50 minutes of operation.
Will the temperature of the part ever reach or exceed 135°F?The given equation that models the temperature of the machine is;
T = -0.005x² + 0.45x + 125
Let check if there's a value that exists for T = 135
Putting T = 135 in the given equation,
135 = -0.005x² + 0.45x + 125
We can simplify this to;
0.005x² - 0.45x + 10 = 0
From the general form of quadratic equation which is ax² + bx + c = 0, where a = 0.005, b = -0.45, and c = 10.
The discriminant of this quadratic equation is given by:
D = b² - 4ac
= (-0.45)² - 4(0.005)(10)
= 0.2025 - 0.2
= 0.0025
The discriminant of the equation is positive which indicates we have two roots. Therefore, the temperature of the machine part will cross 135°F at some point during the operation.
We can also find the roots of the quadratic equation using the formula:
[tex]x = (-b \± \sqrt(D)) / 2a[/tex]
Substituting the values of a, b, and D, we get:
[tex]x = (0.45 \± \sqrt(0.0025)) / 2(0.005)\\= (0.45 \± 0.05) / 0.01[/tex]
Taking the positive value, we get:
x = 50
Therefore, the temperature of the machine part will cross 135°F after 50 minutes of operation.
Learn more on discriminant here;
https://brainly.com/question/12526527
#SPJ1
Write an equation in slope-intercept form for the line that passes through (3,-10) and (6,5).
Answer:
The slope of a line passing through two points (x1, y1) and (x2, y2) is given by the formula:
m = (y2 - y1) / (x2 - x1)
Substituting the values, we get:
m = (5 - (-10)) / (6 - 3) = 15/3 = 5
Now that we have the slope, we can use the point-slope form of a linear equation to write the equation of the line:
y - y1 = m(x - x1)
Substituting the values of m, x1, and y1, we get:
y - (-10) = 5(x - 3)
Simplifying and rearranging the equation, we get:
y + 10 = 5x - 15
y = 5x - 25
Therefore, the equation of the line passing through (3,-10) and (6,5) in slope-intercept form is y = 5x - 25.
Step-by-step explanation:
#trust me bro
Parts A-D. What is the value of the sample mean as a percent? What is its interpretation? Compute the sample variance and sample standard deviation as a percent as measures of rotelle for the quarterly return for this stock.
The sample mean is 2.1, the sample variance is 212.5% and the standard deviation is 14.57%
What is the sample mean?a. The sample mean can be computed as the average of the quarterly percent total returns:
[tex](11.2 - 20.5 + 13.2 + 12.6 + 9.5 - 5.8 - 17.7 + 14.3) / 8 = 2.1[/tex]
So the sample mean is 2.1%, which can be interpreted as the average quarterly percent total return for the stock over the sample period.
b. The sample variance can be computed using the formula:
[tex]s^2 = sum((x - mean)^2) / (n - 1)[/tex]
where x is each quarterly percent total return, mean is the sample mean, and n is the sample size. Plugging in the values, we get:
[tex]s^2 = (11.2 - 2.1)^2 + (-20.5 - 2.1)^2 + (13.2 - 2.1)^2 + (12.6 - 2.1)^2 + (9.5 - 2.1)^2 + (-5.8 - 2.1)^2 + (-17.7 - 2.1)^2 + (14.3 - 2.1)^2 / (8 - 1) = 212.15[/tex]
So the sample variance is 212.15%. The sample standard deviation can be computed as the square root of the sample variance:
[tex]s = \sqrt(s^2) = \sqrt(212.15) = 14.57[/tex]
So the sample standard deviation is 14.57%.
c. To construct a 95% confidence interval for the population variance, we can use the chi-square distribution with degrees of freedom n - 1 = 7. The upper and lower bounds of the confidence interval can be found using the chi-square distribution table or calculator, as follows:
upper bound = (n - 1) * s^2 / chi-square(0.025, n - 1) = 306.05
lower bound = (n - 1) * s^2 / chi-square(0.975, n - 1) = 91.91
So the 95% confidence interval for the population variance is (91.91, 306.05).
d. To construct a 95% confidence interval for the standard deviation (as percent), we can use the formula:
lower bound = s * √((n - 1) / chi-square(0.975, n - 1))
upper bound = s * √((n - 1) / chi-square(0.025, n - 1))
Plugging in the values, we get:
lower bound = 6.4685%
upper bound = 20.1422%
So the 95% confidence interval for the standard deviation (as percent) is (6.4685%, 20.1422%).
Learn more on sample mean here;
https://brainly.com/question/26941429
#SPJ1
Let the Universal Set, S, have 158 elements. A and B are subsets of S. Set A contains 67 elements and Set B contains 65 elements. If Sets A and B have 9 elements in common, how many elements are in neither A nor B?
There are 92 elements in A but not in B.
What are sets?In mathematics, a set is a well-defined collection of objects or elements. Sets are denoted by uppercase symbols, and the number of elements in a finite set is denoted as the cardinality of the set enclosed in curly braces {…}.
Empty or zero quantity:
Items not included. example:
A = {} is a null set.
Finite sets:
The number is limited. example:
A = {1,2,3,4}
Infinite set:
There are myriad elements. example:
A = {x:
x is the set of all integers}
Same sentence:
Two sets with the same members. example:
A = {1,2,5} and B = {2,5,1}:
Set A = Set B
Subset:
A set 'A' is said to be a subset of B if every element of A is also an element of B. example:
If A={1,2} and B={1,2,3,4} then A ⊆ B
Universal set:
A set that consists of all the elements of other sets that exist in the Venn diagram. example:
A={1,2}, B={2,3}, where the universal set is U = {1,2,3}
n(A ∪ B) = n(A – B) + n(A ∩ B) + n(B – A)
Hence, There are 92 elements in A but not in B.
learn more about sets click here:
https://brainly.com/question/13458417
#SPJ1
the figure below shows the change of a population over time. which statement best describes the mode of selection depicted in the figure?
The statement that best describes the mode of selection depicted in the figure is (b) Directional Selection, changing the average color of population over time.
The Directional selection is a type of natural selection that occurs when individuals with a certain trait or phenotype are more likely to survive and reproduce than individuals with other traits or phenotypes.
In the directional selection of evolution, the mean shifts that means average shifts to one extreme and supports one trait and leads to eventually removal of the other trait.
In this case, one end of the extreme-phenotypes which means that the dark-brown rats are being selected for. So, over the time, the average color of the rat population will change.
Therefore, the correct option is (b).
Learn more about Directional Selection here
https://brainly.com/question/12226774
#SPJ4
The given question is incomplete, the complete question is
The figure below shows the change of a population over time. which statement best describes the mode of selection depicted in the figure?
(a) Disruptive Official, favoring the average individual
(b) Directional Selection, changing the average color of population over time
(c) Directional selection, favoring the average individual
(d) Stabilizing Selection, changing the average color of population over time
Question 6 of 10
Based only on the information given in the diagram, which congruence
theorems or postulates could be given as reasons why ACDE AOPQ?
Check all that apply.
AA
A. AAS
B. ASA
C. LL
OD. HL
E. LA
F. SAS
Therefore, A, B, C, and F are the proper responses as the congruence theories or postulates based on the data.
what is triangle ?Having three straight sides and three angles where they intersect, a triangle is a closed, two-dimensional shape. It is one of the fundamental geometric shapes and has a number of characteristics that can be used to study and resolve issues that pertain to it. The triangle inequality theory states that the sum of a triangle's interior angles is always 180 degrees, and that the longest side is always the side across from the largest angle. Triangles can be used to solve a wide range of mathematical issues in a variety of disciplines and can be categorised based on the length of their sides and the measurement of their angles.
given
We can use the following congruence theories or postulates based on the data in the diagram:
A. ASA
B. AAS
C. LL (corresponding angles hypothesis)
F. SAS
Therefore, A, B, C, and F are the proper responses as the congruence theories or postulates based on the data.
To know more about triangle visit:
https://brainly.com/question/2773823
#SPJ1
Show your solution ( 3. ) C + 18 = 29
Answer:
Show your solution ( 3. ) C + 18 = 29
Step-by-step explanation:
To solve the equation C + 18 = 29, we want to isolate the variable C on one side of the equation.
We can start by subtracting 18 from both sides of the equation:
C + 18 - 18 = 29 - 18
Simplifying the left side of the equation:
C = 29 - 18
C = 11
Therefore, the solution to the equation C + 18 = 29 is C = 11.
Maximize z = 3x₁ + 5x₂
subject to: x₁ - 5x₂ ≤ 35
3x1 - 4x₂ ≤21
with. X₁ ≥ 0, X₂ ≥ 0.
use simplex method to solve it and find the maximum value
Answer:
See below.
Step-by-step explanation:
We can solve this linear programming problem using the simplex method. We will start by converting the problem into standard form
Maximize z = 3x₁ + 5x₂ + 0s₁ + 0s₂
subject to
x₁ - 5x₂ + s₁ = 35
3x₁ - 4x₂ + s₂ = 21
x₁, x₂, s₁, s₂ ≥ 0
Next, we create the initial tableau
Basis x₁ x₂ s₁ s₂ RHS
s₁ 1 -5 1 0 35
s₂ 3 -4 0 1 21
z -3 -5 0 0 0
We can see that the initial basic variables are s₁ and s₂. We will use the simplex method to find the optimal solution.
Step 1: Choose the most negative coefficient in the bottom row as the pivot element. In this case, it is -5 in the x₂ column.
Basis x₁ x₂ s₁ s₂ RHS
s₁ 1 -5 1 0 35
s₂ 3 -4 0 1 21
z -3 -5 0 0 0
Step 2: Find the row in which the pivot element creates a positive quotient when each element in that row is divided by the pivot element. In this case, we need to find the minimum positive quotient of (35/5) and (21/4). The minimum is (21/4), so we use the second row as the pivot row.
Basis x₁ x₂ s₁ s₂ RHS
s₁ 4/5 0 1/5 1 28/5
x₂ -3/4 1 0 -1/4 -21/4
z 39/4 0 15/4 3/4 105
Step 3: Use row operations to create zeros in the x₂ column.
Basis x₁ x₂ s₁ s₂ RHS
s₁ 1 0 1/4 7/20 49/10
x₂ 0 1 3/16 -1/16 -21/16
z 0 0 39/4 21/4 525/4
The optimal solution is x₁ = 49/10, x₂ = 21/16, and z = 525/4.
Therefore, the maximum value of z is 525/4, which occurs when x₁ = 49/10 and x₂ = 21/16.
Match the definition:HistogramBinDescriptive StaticsMeanMedianModeStandard deviationA. The scatter around a central pointB. is a measure of a data’s variabilityC. is a graph of the frequency distribution of a set of dataD. values calculated from a data set and used to describe some basic characteristics of the data setE. a group in a histogramF. the middle value of a sorted set of dataG. is the most commonly occurring value in a data set
The matches of Histogram, Bin, Descriptive Statistics, Mean, Median and Standard Deviation are C, E, D, A, F, G and B respectively.
The Match the definition are given.
Histogram - C). is a graph of the frequency distribution of a set of data
Bin - E). a group in a histogram
Descriptive Statistics - D). values calculated from a data set and used to describe some basic characteristics of the data set
Mean - A). The scatter around a central point
Median - F). the middle value of a sorted set of data
Mode - G). is the most commonly occurring value in a data set
Standard Deviation - B). is a measure of a data’s variability
To know more about Histogram:
https://brainly.com/question/30354484
#SPJ4
Bria is a customer who would like to display her collection of soap carvings on top of her bookcase. The collection needs an area of 300 square inches. What should b equal for the top of the bookcase to have the correct area? Round your answer to the nearest tenth of an inch. I need help
D: Please !!!!
Answer:
We can use the formula for the area of a rectangle to solve this problem. Let's assume that the length of the top of the bookcase is L and the width is b. Then, we can write:
L × b = 300
Solving for b, we get:
b = 300 / L
Since we don't know the length L, we cannot find the exact value of b. However, we can use the given information to make an estimate. Let's say that the length of the bookcase is 60 inches. Then, we have:
b = 300 / 60 = 5
So, if the length of the bookcase is 60 inches, the width needs to be at least 5 inches to accommodate Bria's soap carving collection. However, if the length is different, the required width will also be different.
The pens in a box are repackaged equally into 9 packs. Each pack has more than 15 pens.
1. Find an inequality to represent n, the possible number of pens in the box.
2. Explain why you chose this inequality.
Therefore, the possible number of pens in the box is p, where p is greater than 135.
What is inequality?Inequality refers to a situation in which there is a difference or disparity between two or more things, usually in terms of value, opportunity, or outcome. Inequality can take many forms, including social, economic, and political inequality.
Inequalities are mathematical expressions that compare two values using the symbols < (less than), > (greater than), ≤ (less than or equal to), or ≥ (greater than or equal to). To solve an inequality, you need to isolate the variable (the unknown quantity) on one side of the inequality symbol and determine the range of values for which the inequality holds true.
Here are some general steps to solve an inequality:
Simplify both sides of the inequality as much as possible. This may involve combining like terms, distributing terms, or factoring.Get all the variable terms on one side of the inequality symbol and all the constant terms on the other side. Remember that when you multiply or divide both sides of an inequality by a negative number, you must reverse the direction of the inequality symbol.Solve for the variable by isolating it on one side of the inequality symbol. If the variable has a coefficient, divide both sides of the inequality by that coefficient.Write down the solution as an inequality. If you have solved for x, the solution will be in the form of x < a or x > b, where a and b are numbers.Check your solution by testing a value in the original inequality that is within the range of the solution. If the inequality holds true for that value, then the solution is correct. If not, then you may need to recheck your work or adjust your solutionby the question.
Let's say there are 'p' pens in the box. Each pack has more than 15 pens, so we can write the inequality:
p/9 > 15
Multiplying both sides by 9, we get:
p > 135
To learn more about inequality:
https://brainly.com/question/30231190
#SPJ1
The windows to a Tudor-style home create many types of quadrilaterals. Use the picture of the window below to answer the following questions.
Please help me I will give literally anything
a. Determine which type of quadrilaterals you see. Name these quadrilaterals using the labeled vertices.
b. What properties of quadrilaterals would you have to know to identify the parallelograms in the picture? Be specific as to each type of parallelogram by using the properties between sides, angles, or diagonals for each.
Answer:
I'd be happy to help!
a. From the picture of the window, we can identify the following quadrilaterals:
Rectangle: ABCD (all angles are right angles and opposite sides are parallel and congruent)
Parallelogram: EFGH (opposite sides are parallel and congruent)
Trapezoid: BCGH (at least one pair of opposite sides are parallel)
b. To identify the parallelograms in the picture, we would need to know the following properties of parallelograms:
Opposite sides are parallel and congruent
Opposite angles are congruent
Diagonals bisect each other
Using these properties, we can identify the following parallelograms in the picture:
Parallelogram EFGH: Opposite sides EF and GH are parallel and congruent, and opposite sides EG and FH are also parallel and congruent. Additionally, angles E and G are congruent, and angles F and H are congruent.
Rectangle ABCD: Opposite sides AB and CD are parallel and congruent, and opposite sides AD and BC are also parallel and congruent. Additionally, angles A and C are congruent, and angles B and D are congruent. The diagonals AC and BD bisect each other, meaning that they intersect at their midpoints.
Step-by-step explanation:
Find the value of X using the picture below.
Answer:
x = 7
Step-by-step explanation:
The two angles are equal so the opposite sides are equal.
5x-2 =33
Add two to each side.
5x-2+2 = 33+2
5x=35
Divide by 5
5x/5 =35/5
x = 7
Type the correct answer in each box. Assume π = 3.14. Round your answer(s) to the nearest tenth. 90° 30° In this circle, the area of sector COD is 50.24 square units. The radius of the circle is units, and m AB is units.
Therefore, the length of segment AB is approximately 7.4 units.
What is area?Area is a mathematical concept that describes the size of a two-dimensional surface. It is a measure of the amount of space inside a closed shape, such as a rectangle, circle, or triangle, and is typically expressed in square units, such as square feet or square meters. The area of a shape is calculated by multiplying the length of one side or dimension by the length of another side or dimension. For example, the area of a rectangle can be found by multiplying its length by its width.
Here,
To find the radius of the circle, we can use the formula for the area of a sector:
Area of sector = (θ/360) x π x r²
where θ is the central angle of the sector in degrees, r is the radius of the circle, and π is approximately 3.14.
We're given that the area of sector COD is 50.24 square units and the central angle of the sector is 90°. So we can plug in these values and solve for r:
50.24 = (90/360) x 3.14 x r²
50.24 = 0.25 x 3.14 x r²
r² = 50.24 / (0.25 x 3.14)
r² = 201.28
r = √201.28
r ≈ 14.2
Therefore, the radius of the circle is approximately 14.2 units.
Next, we need to find the length of segment AB. Since AB is a chord of the circle, we can use the formula:
AB = 2 x r x sin(θ/2)
where θ is the central angle of the sector in degrees, r is the radius of the circle, and sin() is the sine function.
We're given that the central angle of sector COD is 30°. So we can plug in this value and the radius we found earlier to solve for AB:
AB = 2 x 14.2 x sin(30/2)
AB = 2 x 14.2 x sin(15)
AB ≈ 7.4
To know more about area,
https://brainly.com/question/22469440
#SPJ1
An 8 foot long ladder is leaning against a wall. The top of the ladder is sliding down the wall at the rate of 2 feet per second. How fast is the bottom of the ladder moving along the ground at the point in time when the bottom of the ladder is 4 feet from the wall.
"The rate at which the bottom of the ladder moving along the ground at the point in time when the bottom of the ladder is 4 feet from the wall is calculated to be 3.464 ft/s."
At a pace of 2 feet per second, the lower end of the ladder is being pulled away from the wall.
At a specific moment, when the lower end of the ladder is 4 feet from the wall, we should determine the rate at which the bottom of the ladder is lowering.
From the point t, the bottom of the ladder is x m, the top of the ladder is y m from the wall.
x² + y² = 64
Differentiating the given relationship with regard to t,
2x dx/dt + 2y dy/dt = 0
x dx/dt + y dy/dt = 0
We need to find out dx/dt at x = 4.
dy/dt = -2
At x = 4, we have,
x² + y² = 64
16 + y² = 64
y² = 48
y = 4√3
Put in the known values to find out dx/dt,
x dx/dt + y dy/dt = 0
4 dx/dt + 4√3 (-2) = 0
4 dx/dt = 8√3
dx/dt = 2√3 = 3.464
Thus, the bottom of the ladder is calculated to be moving at the rate 3.464 ft/s.
The figure can be drawn as shown in the attachment.
To know more about speed:
https://brainly.com/question/13548149
#SPJ4
When expressions of the form (x −r)(x − s) are multiplied out, a quadratic polynomial is obtained. For instance, (x −2)(x −(−7))= (x −2)(x + 7) = x2 + 5x − 14.
a. What can be said about the coefficients of the polynomial obtained by multiplying out (x −r)(x − s) when both r and s are odd integers? when both r and s are even integers? when one of r and s is even and the other is odd?
b. It follows from part (a) that x2 − 1253x + 255 cannot be written as a product of two polynomials with integer coefficients. Explain why this is so.
a.(1) When both r and s are odd integers, the quadratic polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers.
(2) When both r and s are even integers, the polynomial obtained by multiplying out (x - r)(x - s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers.
(3) When one of r and s is even and the other is odd, the polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, the coefficient of x term will be an odd integer, while the constant term will be an even integer.
b. x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.
a. When both r and s are odd integers, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers. This is because the sum of two odd integers and the product of two odd integers is also an odd integer.
When both r and s are even integers, the product (x − r)(x − s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers. This is because the sum of two even integers and the product of two even integers is also an even integer.
When one of r and s is even and the other is odd, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and the coefficient of x term will be an odd integer, while the constant term will be an even integer. This is because the sum of an odd and even integer is an odd integer, and the product of an odd and even integer is an even integer.
b. If x^2 - 1253x + 255 can be written as a product of two polynomials with integer coefficients, then we can write it as (x - r)(x - s) where r and s are integers. From part (a), we know that both r and s cannot be odd integers since the coefficient of x term would be odd, but 1253 is an odd integer. Similarly, both r and s cannot be even integers since the constant term would be even, but 255 is an odd integer. Therefore, one of r and s must be odd and the other must be even. However, the difference between an odd integer and an even integer is always odd, so the coefficient of x term in the product (x - r)(x - s) would be odd, which is not equal to the coefficient of x term in x^2 - 1253x + 255. Hence, x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.
Learn more about quadratic polynomial here
brainly.com/question/28988445
#SPJ4
Expand and simplify completely
[tex]x(x+(1+x)+2x)-3(x^2-x+2)[/tex]
Answer:
x² + 4x - 6
Step-by-step explanation:
x(x + (1 + x) + 2x) - 3(x² - x + 2) ← simplify parenthesis on left
= x(x + 1 + x + 2x) - 3(x² - x + 2)
= x(4x + 1) - 3(x² - x + 2) ← distribute parenthesis
= 4x² + x - 3x² + 3x- 6 ← collect like terms
= x² + 4x - 6
What is the difference between the questionnaire and an interview?
Answer: Questionnaire refers to a research instrument, in which a series of question, is typed or printed along with the choice of answers, expected to be marked by the respondents, used for survey or statistical study. It consists of aformalisedd set of questions, in a definite order on a form, which are mailed to the respondents or manually delivered to them for answers. The respondents are supposed to read, comprehend and give their responses, in the space provided.
A ‘Pilot Study’ is advised to be conducted to test the questionnaire before using this method. A pilot survey is nothing but a preliminary study or say rehearsal to know the time, cost, efforts, reliability and so forth involved in it.
The interview is a data collection method wherein a direct, in-depth conversation between interviewer and respondent takes place. It is carried out with a purpose like a survey, research, and the like, where both the two parties participate in the one to one interaction. Under this method, oral-verbal stimuli are presented and replied by way of oral-verbal responses.
It is considered as one of the best methods for collecting data because it allows two way exchange of information, the interviewer gets to know about the respondent, and the respondent learns about the interviewer. There are two types of interview:
Personal Interview: A type of interview, wherein there is a face to face question-answer session between the interviewer and interviewee, is conducted.
Telephonic Interview: This method involves contacting the interviewee and asking questions to them on the telephone itself.
If n is an integer and n > 1, then n! is the product of n and every other positive integer that is less than n. for example, 5! = 5 x 4 x 3 x 2 x 1a. Write 6! in standard factored formb. Write 20! in standard factored formc. Without computing the value of (20!)2, determine how many zeros are at the end of this number when it is written in decimal form. Justify your answer
a. 6! = 6 x 5 x 4 x 3 x 2 x 1 = 720. b. 20! = 20 x 19 x 18 x ... x 2 x 1. c. There are 16 zeros at the end of the decimal representation of (20!)2.
a. 6! = 6 x 5 x 4 x 3 x 2 x 1 = 720
b. 20! = 20 x 19 x 18 x ... x 2 x 1. To write this in factored form, we can identify the prime factors of each number and write the product using exponents. For example, 20 = 2² x 5, so we can write 20! as:
20! = (2² x 5) x 19 x (2 x 3²) x 17 x (2² x 7) x 13 x (2 x 2 x 3) x 11 x (2³) x (3) x (2) x 7 x (2) x 5 x (2) x 3 x 2 x 1
Simplifying, we get:
20! = 2¹⁸ x 3⁸ x 5⁴ x 7² x 11 x 13 x 17 x 19
c. The number of zeros at the end of (20!)² in decimal form is determined by the number of factors of 10, which is equivalent to the number of factors of 2 x 5. Since there are more factors of 2 than 5 in the prime factorization of (20!)², we only need to count the number of factors of 5. There are four factors of 5 in the prime factorization of 20!, which contribute four factors of 10 to the square. Therefore, (20!)²ends in 8 zeros when written in decimal form.
Learn more about integer here: brainly.com/question/15276410
#SPJ4
exercise 2.4.3 in each case, solve the systems of equations by finding the inverse of the coefficient matrix.
The inverse of the coefficient matrix is A^-1 = [-2 2]. The solution to the system of equations is x = -1 and y = 1/5.
To solve the system of equations:
2x + 2y = 1
2x - 3y = 0
We can write this system in matrix form as:
[2 2] [x] [1]
[2 -3] [y] = [0]
The coefficient matrix is:
[2 2]
[2 -3]
To find the inverse of the coefficient matrix, we can use the following formula:
A^-1 = (1/|A|) adj(A)
where |A| is the determinant of A and adj(A) is the adjugate of A.
The determinant of the coefficient matrix is:
|A| = (2)(-3) - (2)(2) = -10
The adjugate of the coefficient matrix is:
adj(A) = [-3 2]
[-2 2]
Therefore, the inverse of the coefficient matrix is:
A^-1 = (1/-10) [-3 2]
[-2 2]
Multiplying both sides of the matrix equation by A^-1, we get:
[x] 1 [-3 2] [1]
[y] = -10 [-2 2] [0]
Simplifying the right-hand side, we get:
[x] [-1]
[y] = [1/5]
Therefore, the solution to the system of equations is:
x = -1
y = 1/5
To know more about inverse of matrix:
https://brainly.com/question/4017205
#SPJ4
_____The given question is incomplete, the complete question is given below:
solve the systems of equations by finding the inverse of the coefficient matrix. a. 2x+2y=1 2x-3y-0
help I’ll give brainliest ^•^ just question (7) thanks!!
Answer:
To shift the graph of f(x) = |x| to have a domain of [-3, 6], we need to move the left endpoint from -6 to -3 and the right endpoint from 3 to 6.
A translation to the right by 3 units will move the left endpoint of the graph of f(x) to -3, but it will also shift the right endpoint to 6 + 3 = 9, which is outside the desired domain.
A translation to the left by 3 units will move the right endpoint of the graph of f(x) to 3 - 3 = 0, which is outside the desired domain.
A translation upward or downward will not change the domain of the graph, so options B and D can be eliminated.
Therefore, the correct answer is C g(x) = x - 3. This translation will move the left endpoint to -3 and the right endpoint to 6, which is exactly the desired domain.
Let X1, X2, ..., Xn denote n independent and identically distributed Bernoulli random vari- ables s.t. P(X; = 1) = p and P(Xi = 0) = 1 – p. for each i = 1, 2, ..., n. Show that __, Xi is sufficient for p by using the factorization criterion given in Theorem 9.4. THEOREM 9.4 Let U be a statistic based on the random sample Yı, Y2, ..., Yn. Then U is a sufficient statistic for the estimation of a parameter 0 if and only if the likelihood L(0) = L(y1, y2, ..., yn 10) can be factored into two nonnegative functions, L(y1, y2, ..., yn (0) = g(u,0) x h(yı, y2, ..., yn) where g(u,0) is a function only of u and 0 and h(y1, y2, ..., yn) is not a function of o.
The likelihood function can be factored using Theorem 9.4 as L(p) = L(X₁, X₂, ..., Xn | p) = g(Σⁿᵢ=1Xᵢ, p) * h(X₁, X₂, ..., Xn), where g(Σⁿᵢ=1Xᵢ, p) = p^Σⁿᵢ=1Xᵢ (1-p)^(n-Σⁿᵢ=1Xᵢ) and h(X₁, X₂, ..., Xn) = 1. This satisfies the factorization criterion, and thus, Σⁿᵢ=1Xᵢ is a sufficient statistic for p.
To show that Σⁿᵢ=1Xᵢ is sufficient for p, we need to show that the likelihood function can be factored using Theorem 9.4 as:
L(p) = L(X₁, X₂, ..., Xn | p) = g(Σⁿᵢ=1Xᵢ, p) * h(X₁, X₂, ..., Xn)
where g(Σⁿᵢ=1Xᵢ, p) is a function only of Σⁿᵢ=1Xᵢ and p, and h(X₁, X₂, ..., Xn) is not a function of p.
First, we can write the joint probability mass function of X₁, X₂, ..., Xn as:
P(X₁ = x₁, X₂ = x₂, ..., Xn = x_n) = p^Σⁿᵢ=1xᵢ (1-p)^Σⁿᵢ=1(1-xᵢ)
Taking the product of these probabilities for all i, we get:
L(p) = L(X₁, X₂, ..., Xn | p) = Πⁿᵢ=1P(Xᵢ = xᵢ) = p^Σⁿᵢ=1Xᵢ (1-p)^Σⁿᵢ=1(1-Xᵢ)
Using the factorization criterion given in Theorem 9.4, we need to find functions g(u, p) and h(X₁, X₂, ..., Xn) such that:
L(p) = L(X₁, X₂, ..., Xn | p) = g(Σⁿᵢ=1Xᵢ, p) * h(X₁, X₂, ..., Xn)
Let's take g(u, p) = pᵘ(1-p)⁽ⁿ⁻ᵘ⁾, which only depends on u and p. Then:
L(p) = L(X₁, X₂, ..., Xn | p) = g(Σⁿᵢ=1Xᵢ, p) * h(X₁, X₂, ..., Xn)
= p^Σⁿᵢ=1Xᵢ (1-p)^Σⁿᵢ=1(1-Xᵢ) * h(X₁, X₂, ..., Xn)
We can see that the term Σⁿᵢ=1Xᵢ appears in the exponent of p, and Σⁿᵢ=1(1-Xᵢ) appears in the exponent of (1-p). Therefore, we can write:
L(p) = L(X₁, X₂, ..., Xn | p) = [p^Σⁿᵢ=1Xᵢ (1-p)^Σⁿᵢ=1(1-Xᵢ)] * [1]
where the second factor is a constant function of p. This satisfies the factorization criterion, with g(u, p) = pᵘ(1-p⁽ⁿ⁻ᵘ⁾ and h(X₁, X₂, ..., Xn) = 1.
Therefore, we have shown that Σⁿᵢ=1Xᵢ is a sufficient statistic for p.
Learn more about probability here: brainly.com/question/30034780
#SPJ4
Complete question is in the image attached below
WILL MARK AS BRAINLIEST!!!!!!!!!!!!!!
If "f" is differentiable and f(1) < f(2), then there is a number "c", in the interval (_____, _____) such that f'(c)>_______
If "f" is differentiable and f(1) < f(2), then there is a number "c", in the interval (1, 2) such that f'(c)> 0.
How do we know?Applying the Mean Value Theorem for derivatives, if a function f is continuous on the closed interval [a, b] and differentiable on the open interval (a, b), then there exists at least one number c in the interval (a, b) such that:
f'(c) = (f(b) - f(a)) / (b - a)
In the scenario above, we have that f is differentiable, and that f(1) < f(2).
choosing a = 1 and b = 2.
Then applying the Mean Value Theorem, there exists at least one number c in the interval (1, 2) such that:
f'(c) = (f(2) - f(1)) / (2 - 1)
f'(c) = f(2) - f(1)
We have that f(1) < f(2), we have:
f(2) - f(1) > 0
We can conclude by saying that there exists a number c in the interval (1, 2) such that:
f'(c) = f(2) - f(1) > 0
Learn more about Mean Value Theorem at: https://brainly.com/question/19052862
#SPJ1
Let G
be a group. Say what it means for a map φ:G→G
to be an automorphism. Show that the set-theoretic composition φψ=φ∘ψ
of any two automorphisms φ,ψ
is an automorphism. Prove that the set Aut(G)
of all automorphisms of the group G
with the operation of taking the composition is a group.
a) An automorphism of a group G is a bijective map φ:G→G that preserves the group structure. That is, φ(ab) = φ(a)φ(b) and φ(a⁻¹) = φ(a)⁻¹ for all a, b ∈ G.
b) The set-theoretic composition φψ of any two automorphisms φ, ψ is an automorphism, as it preserves the group structure and is bijective.
c) The set Aut(G) of all automorphisms of G, with the operation of composition of maps, is a group. This is because it satisfies the four group axioms: closure, associativity, identity, and inverses. Therefore, Aut(G) is a group under composition of maps.
An automorphism of a group G is a bijective map φ:G→G that preserves the group structure, meaning that for any elements a,b∈G, we have φ(ab) = φ(a)φ(b) and φ(a⁻¹) = φ(a)⁻¹. In other words, an automorphism is an isomorphism from G to itself.
To show that the set-theoretic composition φψ is an automorphism, we need to show that it satisfies the two conditions for being an automorphism. First, we have
(φψ)(ab) = φ(ψ(ab)) = φ(ψ(a)ψ(b)) = φ(ψ(a))φ(ψ(b)) = (φψ)(a)(φψ)(b)
using the fact that ψ and φ are automorphisms. Similarly,
(φψ)(a⁻¹) = φ(ψ(a⁻¹)) = φ(ψ(a))⁻¹ = (φψ)(a)⁻¹
using the fact that ψ and φ are automorphisms. Therefore, φψ is an automorphism.
To show that Aut(G) is a group, we need to show that it satisfies the four group axioms
Closure: If φ,ψ∈Aut(G), then φψ is also in Aut(G), as shown above.
Associativity: Composition of maps is associative, so (φψ)χ = φ(ψχ) for any automorphisms φ,ψ,χ of G.
Identity: The identity map id:G→G is an automorphism, since it clearly preserves the group structure and is bijective. It serves as the identity element in Aut(G), since φid = idφ = φ for any φ∈Aut(G).
Inverses: For any automorphism φ∈Aut(G), its inverse φ⁻¹ is also an automorphism, since it is bijective and preserves the group structure. Therefore, Aut(G) is closed under inverses.
Since Aut(G) satisfies all four group axioms, it is a group under composition of maps.
Learn more about automorphism here
brainly.com/question/30967813
#SPJ4
According to Money magazine, Maryland had the highest median annual household income of any state in 2018 at $75,847.† Assume that annual household income in Maryland follows a normal distribution with a median of $75,847 and standard deviation of $33,800.
(a) What is the probability that a household in Maryland has an annual income of $90,000 or more? (Round your answer to four decimal places.)
(b) What is the probability that a household in Maryland has an annual income of $50,000 or less? (Round your answer to four decimal places.)
The required probability that a household in Maryland with annual income of ,
$90,000 or more is equal to 0.3377.
$50,000 or less is equal to 0.2218.
Annual household income in Maryland follows a normal distribution ,
Median = $75,847
Standard deviation = $33,800
Probability of household in Maryland has an annual income of $90,000 or more.
Let X be the random variable representing the annual household income in Maryland.
Then,
find P(X ≥ $90,000).
Standardize the variable X using the formula,
Z = (X - μ) / σ
where μ is the mean (or median, in this case)
And σ is the standard deviation.
Substituting the given values, we get,
Z = (90,000 - 75,847) / 33,800
⇒ Z = 0.4187
Using a standard normal distribution table
greater than 0.4187 as 0.3377.
P(X ≥ $90,000)
= P(Z ≥ 0.4187)
= 0.3377
Probability that a household in Maryland has an annual income of $90,000 or more is 0.3377(rounded to four decimal places).
Probability that a household in Maryland has an annual income of $50,000 or less.
P(X ≤ $50,000).
Standardizing X, we get,
Z = (50,000 - 75,847) / 33,800
⇒ Z = -0.7674
Using a standard normal distribution table
Probability that a standard normal variable is less than -0.7674 as 0.2218. This implies,
P(X ≤ $50,000)
= P(Z ≤ -0.7674)
= 0.2218
Probability that a household in Maryland has an annual income of $50,000 or less is 0.2218.
Therefore, the probability with annual income of $90,000 or more and $50,000 or less is equal to 0.3377 and 0.2218 respectively.
learn more about probability here
brainly.com/question/24111146
#SPJ4
Mia has a collection of vintage action figures that is worth $190. If the collection appreciates at a rate of 6% per year, which equation represents the value of the collection after 5 years?
The equation that represents the value of the collection after 5 years is:
Value of collection after 5 years = 190 x (1 + 0.06)^5
Explanation:
To calculate the value of the collection after 5 years, we need to use the compound interest formula. This formula is represented as A = P x (1 + r)^n, where P is the principal amount (initial value of the collection), r is the rate of interest (in this case, 6%), and n is the number of years (in this case, 5).
Therefore, the equation for the value of the collection after 5 years is:
Value of collection after 5 years = 190 x (1 + 0.06)^5
This can also be written as:
Value of collection after 5 years = 190 x 1.31 (1.31 is the result of (1 + 0.06)^5)
Therefore, the value of the collection after 5 years is $246.90.
Answer: 254.26
Step-by-step explanation:
Subtract 1/9 - 1/14 and give answer as improper fraction if necessary.
Answer:
To subtract 1/9 - 1/14, we need to find a common denominator. The smallest number that both 9 and 14 divide into is 126.
So, we will convert both fractions to have a denominator of 126:
1/9 = 14/126
1/14 = 9/126
Now we can subtract them:
1/9 - 1/14 = 14/126 - 9/126
Simplifying the right-hand side by subtracting the numerators, we get:
5/126
Therefore, 1/9 - 1/14 = 5/126 as an improper fraction.
Answer:
1/9-1/14
=14-9/9*14
=5/126
= 25 1/5
Help me find the value of x
Answer:
x = 30
Step-by-step explanation:
We know
The three angles must add up to 180°. We know one is 20°, so the other two must add up to 160°.
2x + 3x + 10 = 160
5x + 10 = 160
5x = 150
x = 30
The Venn diagram here shows the cardinality of each set. Use this to find the cardinality of the given set.
n(A)=
The cardinality of set A, n(A) = 29
What is cardinality of a set?The cardinality of a set is the total number of elements in the set
Given the Venn diagram here shows the cardinality of each set. To find the cardinality of set A, n(A), we proceed as follows.
Since the cardinality of a set is the total number of elements in the set, then cardinality of set A , n(A) = 9 + 8 + 3 + 9
= 29
So, n(A) = 29
Learn more about cardinality of a set here:
https://brainly.com/question/27846845
#SPJ1