A 0.25 kg mass is placed on a vertically oriented spring that is stretched 0.56 meters from its equilibrium position. If the spring constant is 105 N/m, how fast will the mass be moving when it reaches the equilibrium position? Hint: You cannot ignore the change in gravitational potential energy in this problem. Please give your answer in units of m/s, however, do not explicitly include units when typing your answer into the answer box.

Answers

Answer 1

Answer:

The speed of the ball when it reaches equilibrium position is 3.31 m/s

Explanation:

Given;

mass of the object, m = 0.25 kg

initial displacement of the object, h₁ = 0.56 m

spring constant, k = 105 N/m

displacement at equilibrium position, h₂ = 0

initial velocity of the object, v₁ = 0

velocity of the object at equilibrium position = v₂

The change in gravitational potential energy at the equilibrium position is given as;

ΔP.E = mg(h₂ - h₁)

The change in kinetic energy of the object at the equilibrium position is given as;

ΔK.E = ¹/₂m(v₂² - v₁²)  

Apply the principle of conservation of mechanical energy;

ΔK.E  +  ΔP.E = 0

¹/₂m(v₂² - v₁²)  +  mg(h₂ - h₁) = 0

¹/₂m(v₂² - 0)  +  mg(0 - h₁) = 0

¹/₂mv₂²  -  mgh₁  =  0

¹/₂mv₂²  = mgh

¹/₂v₂² = gh

v₂² = 2gh

v₂ = √2gh

v₂ = √(2 x 9.8 x 0.56)

v₂ = 3.31 m/s

Therefore, the speed of the ball when it reaches equilibrium position is 3.31 m/s


Related Questions

Suppose that 2 J of work is needed to stretch a spring from its natural length of 28 cm to a length of 43 cm. (a) How much work is needed to stretch the spring from 33 cm to 35 cm

Answers

Answer:

0.035 J

Explanation:

Applying,

W = ke²/2.............. Equation 1

Where W = workdone by the stretching the spring, k = spring constant, e = extension.

make k the subject of the equation

k = 2W/e²............... Equation 2

From the question

Given: W = 2 J, e = (43-28) = 15 cm = 0.15 m

Substitute these values into equation 2

k = (2×2)/(0.15²)

k = 177.78 N/m

Hence, work need to stretch the spring from 33 cm to 35 cm

therefore,

e = 35-33 = 2 cm = 0.02 m

Substitute into equation 1

W = 177.78(0.02²)/2

W = 0.035 J

20 points, im begging for help‼️
How much capacitance is needed to
store 0.00100 J of energy when the
charge on the capacitor is
4.86 x 10-5 C?
[?] x 10?!F

Answers

Answer:

Capacitance= 1.18×10^-6

Answer: 1.18*10^-6

Explanation:

Calculate the heat energy conducted per hour through the side walls of a cylindrical steel
boiler of 1.00 m diameter and 3.0 m long if the internal and external temperatures of the
walls are 140 °C and 40 °C respectively and the thickness of the walls is 6.0 mm. (Thermal
conductivity of steel, k = 42 Wm-4°C-4)

Answers

Explanation:

heat caoacity and heat is difference

The heat energy conducted per hour through the side walls of the cylindrical steel boiler  is 27708847 kJ.

What is thermal conductivity?

The rate at which heat is transported by conduction through a material's unit cross-section area when a temperature gradient exits perpendicular to the area is known as thermal conductivity.

In the International System of Units (SI), thermal conductivity is measured by Wm⁻¹K⁻¹.

Diameter of the cylindrical steel boiler: d = 1.00m.

Length  of the cylindrical steel boiler: l = 3.00m.

thickness of the walls is = 6.0 mm = 0.006 m

Temperature gradient is = (140-40) °C/0.006 m = 1666.67 °C/m

Thermal conductivity of steel,  = 42 W/m-°C.

Hence, the heat energy conducted per hour through the side walls of the cylindrical steel boiler = 42×3600×1666.67 ×2π×0.5(0.5+3.0) Joule

= 27708847 kJ

Learn more about  thermal conductivity here:

https://brainly.com/question/23897839

#SPJ2

In June 1985, a laser beam was sent out from the Air Force Optical Station on Maui and reflected back from the shuttle Discovery as it passed by 354 km overhead. The diameter of the central maximum of the beam at the shuttle position was 500 nm. What is the effective diameter of the circular laser aperture at the Maui ground station

Answers

This question is incomplete, the complete question is;

In June 1985, a laser beam was sent out from the Air Force Optical Station on Maui and reflected back from the shuttle Discovery as it passed by 354 km overhead. The diameter of the central maximum of the beam at the shuttle position was said to be 9.1 m, and the beam wavelength was 500 nm.

What is the effective diameter of the circular laser aperture at the Maui ground station

Answer:

the effective diameter of the circular laser aperture at the Maui ground station is 4.747 cm

Explanation:

Given the data in the question;

Separation between observer and point L = 354 km = 354000 m

Linear separation D = 9.1 m

wavelength λ = 500 nm = 500 × 10⁻⁹ m

Now, for small angles;

θ = D / L

θ = 9.1 m /  354000 m

θ = 2.57 × 10⁻⁵ rad

For a circular aperture;

sinθ = ( 1.22 × λ ) / d

for small angles;

θ = ( 1.22 × λ ) / d

so

θ = 2 × θ

θ = 2 × [( 1.22 × λ ) / d]

we substitute

2.57 × 10⁻⁵ = 2 × [( 1.22 × 500 × 10⁻⁹ ) / d]

2.57 × 10⁻⁵ = 0.00000122 / d

d = 0.00000122 / 2.57 × 10⁻⁵

d = 0.04747 m

d = ( 0.04747 × 100 )m

d = 4.747 cm

Therefore, the effective diameter of the circular laser aperture at the Maui ground station is 4.747 cm

1. Calculate the density of a 5.00 g marble which, when placed in a
graduated cylinder containing 60 milliliters of water, raised the volume of
the water to 68 milliliters.
2. An elevator with a mass of 1000kg is lifted 20 meters. How much work
was done on the elevator?
3. Calculate the potential energy of a 12 kg cat at the top of a 42 meter-
high hill.
4. Calculate the kinetic energy in joules of a 1500 kg car that is moving at a
speed of 10 m/s.

Answers

Answer:

1. 0.625 g/mL

2. 2×10⁵ J

3. 5040 J

4. 75000 J

Explanation:

1. Determination of the density.

We'll begin by calculating the volume of the marble. This can be obtained as follow:

Volume of water = 60 mL

Volume of water + Marble = 68 mL

Volume of marble =?

Volume of marble = (Volume of water + Marble) – (Volume of water)

Volume of marble = 68 – 60

Volume of marble = 8 mL

Finally, we shall determine the density of the marble. This can be obtained as follow:

Mass of marble = 5 g

Volume of marble = 8 mL

Density of marble =?

Density = mass / volume

Density of marble = 5 / 8

Density of marble = 0.625 g/mL

2. Determination of the work done.

Mass (m) = 1000 Kg

Height (h) = 20 m

Acceleration due to gravity (g) = 10 m/s²

Workdone (Wd) =?

The work done can be obtained as follow:

Wd = mgh

Wd = 1000 × 10 × 20

Wd= 2×10⁵ J

3. Determination of the potential energy.

Mass (m) = 12 Kg

Height (h) = 42 m

Acceleration due to gravity (g) = 10 m/s²

Potential energy (PE) =?

The potential energy can be obtained as follow:

PE = mgh

PE = 12 × 10 × 42

PE = 5040 J

4. Determination of the kinetic energy.

Mass (m) = 1500 Kg

Velocity (v) = 10 m/s

Kinetic energy (KE) =?

The kinetic energy can be obtained as follow:

KE = ½mv²

KE = ½ × 1500 × 10²

KE = 750 × 100

KE = 75000 J

A professional quarterback throws a 0.40 kg football. what is the force of weight?

Answers

Answer:

3.92N

Explanation:

Force= mass×accelerarion due gravity

But mass= 0.40kg

acceleration due to gravity = 9.8 m/s^2

Force = 0.40×9.8

Force=3.92N

A motorist travels due North at 90 km/h for 2 hours. She changes direction and travels West at 60 km/for 1 hour.
a) Calculate the average speed of the motorist [4]
b) Calculate the average velocity of the motorist.

Answers

Answer:

a. 50km/hr.

b. 10km/hr

Explanation:

Average speed, which is calculated by dividing the total distance travelled by the time interval as follows:

Average speed = total distance travelled ÷ time

Average velocity is calculated by dividing the total displacement by the time interval as follows:

Average velocity = change in displacement (∆x) ÷ time (t)

According to this question, a motorist travels due North at 90 km/h for 2 hours. She then changes direction and travels West at 60 km/for 1 hour.

Total distance of this journey is 90 + 60 = 150

Total time taken = 1 + 2 = 3hours

Average speed = 150/3

= 50km/hr.

b.) Average velocity = x2 - x1/t

Average velocity = 90 - 60/3

= 30/3

= 10km/hr

What is the source of almost all energy on Earth?

Earth’s hot core
the Sun
stored carbon
moving water

Answers

Answer:

the sun

Explanation:

The sun is the source of almost all energy on Earth beacuse both plants and animal on Earth derive their energy from the sun.

Source of energy on Earth

The Earth is one of the planets that make up the solar system. The Sun is the center of the universe and the Earth revolves round the sun.

The source of almost all energy on Earth is from the sun. The energy from the sun is callled solar energy.

This energy from the sun can be used by the planet to manufatcure its own food. The plants are consumed by animals to provide energy their metabolic activities.

Thus, we can conclude that the sun is the source of almost all energy on Earth beacuse both plants and animal on Earth derive their energy from the sun.

Learn more about solar energy here: https://brainly.com/question/17711999

A farmhand pushes a 23 kg bale of hay 3.9 m across the floor of a barn. If she exerts a horizontal force of 91 N on the hay, how much work has she done?

Answers

Answer:

W = 354.9 J

Explanation:

Given that,

The mass of a bale of hay, m = 23 kg

The displacement, d = 3.9 m

The horizontal force exerted on the hay, F = 91 N

We need to find the work done. We know that,

We know that,

Work done, W = Fd

So,

W = 91 N × 3.9 m

W = 354.9 J

So, the required work done is 354.9 J.

A motor has an output of 1000 watts. When the motor is working a full capacity, how much time will it require to lift a 50 Newton weight 100 meters?

Answers

The time required to lift the weight is 5 seconds.

What is time?

Time is the measure of past or present events or occurrences. The S.I unit of time is seconds (s).

To calculate the time required to lift the weight, we use the formula below.

Formula:

P = Fd/t.................. Equation 1

Where:

P = PowerF = Weightd = distance.t = time

make t the subject of the equation.

t = Fd/P................ Equation 2

From the question,

Given:

F = 50 Nd = 100 mP = 1000 W

Substitute these values into equation 2

t = (50×100)/1000t = 5 seconds.

Hence, The time required to lift the weight is 5 seconds.

Learn more about time here: https://brainly.com/question/4931057

An unstretched ideal spring hangs vertically from a fixed support. A 0.4 kg object is then attached to the lower end of the spring. The object is pulled down to a distance of 0.35 m below the unstretched position and released from rest at time t= 0. A graph of the subsequent vertical position y of the lower end of the spring as a function of t is given above, where y= 0 when the spring was initially unstretched. At which time is the upward velocity of the object the greatest?

Answers

Answer:

The correct answer will be "0.25 sec".

Explanation:

The graph of the given question is attached below.

According to the graph of the question,

Time,

T = 1 sec

For the upward velocity,

⇒ [tex]t = \frac{T}{4}[/tex]

By putting the value, we get

⇒    [tex]=\frac{1}{4}[/tex]

⇒    [tex]=0.25 \ sec[/tex]

Give an example of a physical entity that is quantized. State specifically what the entity is and what the limits are on its values.

Answers

Answer:

A charge is a physical entity that has been quantized. The limits on its values are the value of a charged particle quantized in the state where 'n'...

Explanation:

One example of a physical entity that is quantized is:

The amount of money in your pocket.

The amount can't have any fraction of 1 cent.  

Its value must be an integer-multiple of cents, or 0.01 dollar.    

When it increases or decreases, it jumps from one integer number of cents to the next integer number.  It doesn't "slide" from one to the next.  It can never have a value between two integer numbers of cents.

The rotating loop in an AC generator is a square 18 cm on each side. It is rotated at 60.0 Hz in a uniform magnetic field of 0.3T. Calculate the approximate value of the maximum amplitude of the power delivered to the loop for a loop resistance of 12 ohm ?

Answers

Answer:

The maximum amplitude power is 1.12 W

Explanation:

Given;

length of each side of the square, L = 18 cm = 0.18 m

angular frequency, f = 60 Hz

magnetic field, B = 0.3 T

resistance of the loop, R = 12 ohm

The area of the loop, A = L² = 0.18 m x 0.18 m = 0.0324 m²

The angular speed, ω = 2πf = 2π x 60 = rad/s = 377.04 rad/s

The maximum value of emf induced;

[tex]E_{max} = NBA \omega\\\\where; \\N \ is \ number \ of \ turns\\\\E_{max} = (1) \times 0.3 \times 0.0324 \times 377.04\\\\E_{max} = 3.665 \ V[/tex]

The maximum amplitude power is calculated as;

[tex]Power = \frac{(E_{max})^2 }{R} \\\\Power = \frac{(3.665)^2}{12} \\\\Power = 1.12 \ W[/tex]

During hockey practice, two pucks are sliding across the ice in the same direction. At one instant, a 0.18-kg puck is moving at 16 m/s while the other puck has a mass of 0.14 kg and a speed of 3.8 m/s. What is the velocity of the center of mass of the two pucks?

Answers

Answer:

10.66 m/s

Explanation:

Applying,

The law of conservation of momentum,

Total momentum before collision = Total momentum after collision

mu+m'u' = V(m+m').............. Equation 1

Where m = mass of the first puck, u = initial velocity of the first puck, m' = mass of the second puck, u' = initial velocity of the second puck, V = Velocity of the center of the two pucks

make V the subject of the equation

V = (mu+m'u')/(m+m').............. Equation 2

Given: m = 0.18 kg, u = 16 m/s, m' = 0.14 kg, u' = 3.8 m/s

Substitute these values into equation 2

V = [(0.18×16)+(0.14×3.8)]/(0.18+0.14)

V = (2.88+0.532)/(0.32)

V = 3.412/0.32

V = 10.66 m/s

Vectors 퐴, 퐵and 퐶are added together. 퐴has a magnitude of 20.0 units and makes an angle of 60.0° counterclockwise from the negativex-axis. 퐵has a magnitude of 40.0 units and makes an angle of 30.0° counterclockwise from the positive x-axis.퐶has a magnitude of 35.0 units and makes an angle of 60.0° clockwise from the negative y-axis. Determine the magnitude of the resultant vector 퐴+퐵+퐶and its direction as an angle measured counterclockwise from the positive x-axis.

Answers

Answer:

Magnitude = 15.86 units

direction = 69 degree below negative X axis

Explanation:

A = 20 units at 60.0° counterclockwise from the negative x - axis

B = 40 units at 30.0° counterclockwise from the positive x - axis

C = 35 units at 60.0° clockwise from the negative y - axis

Write the vectors in the vector form

[tex]\overrightarrow{A} =20 (- cos 60 \widehat{i} - sin 60 \widehat{j})=- 10\widehat{i} - 17.3 \widehat{j}\\\\\overrightarrow{B} =40 (cos 30 \widehat{i} + sin 30 \widehat{j})= 34.6\widehat{i} +20 \widehat{j}\\\\\overrightarrow{C} =35 (- sin 60 \widehat{i} - cos 60 \widehat{j})=- 30.3\widehat{i} - 17.5 \widehat{j}\\\\Now\\\\overrightarrow{A} + \overrightarrow{B} + \overrightarrow{C} = (- 10 + 34.6 - 30.3) \widehat{i} + (-17.3 + 20-17.5)\widehat{j}\\\\[/tex]

[tex]\\\overrightarrow{A} + \overrightarrow{B} + \overrightarrow{C} = - 5.7\widehat{i} -14.8\widehat{j}[/tex]

The magnitude is given by

[tex]= \sqrt{5.7^2 + 14.8^2} = 15.86 units[/tex]

The direction is given by

[tex]tan\theta = \frac{- 14.8}{- 5.7}\\\\\theta= 69^o[/tex]

below negative X axis.  

what happened on march 21 every year in the northern hemisphere​

Answers

Answer:

B. The Spring equinox

Explanation:

The vernal equinox marks the moment the sun crosses the celestial equator.  The vernal equinox happens on March 19, 20, or 21 every year in the Northern Hemisphere. In the Southern Hemisphere, this same event marks the beginning of fall.  (Source: What Exactly Is The Spring Equinox? - Dictionary.com)

Hopefully this helps.

Suppose the Earth were squeezed down to the size of a small mountain. The mass of the Earth would not change, just its volume and radius. If you were now standing on the surface, would the gravitational force on you be greater than, less than or the same as before the Earth was squeezed?

Answers

Explanation:

Much greater. Gravitational force depends on the mass and separation distance. Shrinking the earth means the mass remains the same while the radius gets smaller. Since gravitational force is inversely proportional to the square of the separation distance, as shown by Newton's universal gravitational law

[tex]\:\:\:F_G = G \dfrac{mM_E}{R^2}[/tex]

shrinking the radius even by a factor of 10 will cause your weight, which also happens to be the gravitational force of the earth on you, to be 100 times more.

If the mass of the Earth remains the same and only its volume and radius are decreased, then the average density of the Earth would increase significantly.

What is gravitational force?

Gravity, also known as gravitational force, pulls objects with mass towards each other. We frequently consider the force of gravity from Earth.

If the Earth's mass remains constant while its volume and radius are reduced, the average density of the Earth increases significantly.

This is due to the fact that the mass has been compressed into a much smaller volume.

As a result, standing on the surface, the gravitational force on you would be greater than before the Earth was compressed to the size of a small mountain.

When the Earth is compressed, the distance between you and the center of the Earth decreases while the mass remains constant.

Thus, your gravitational force increases.

For more details regarding gravitational force, visit:

https://brainly.com/question/12528243

#SPJ2

In a science fiction novel two enemies, Bonzo and Ender, are fighting in outer spce. From stationary positions, they push against each other. Bonzo flies off with a velocity of 1.1 m/s, while Ender recoils with a velocity of -4.3 m/s. Determine the ratio Bonzo/mEnder of the masses of these two enemies.

Answers

Answer:

the ratio Bonzo/mEnder of the masses of these two enemies is 3.91

Explanation:

Given the data in the question;

Velocity of Bonzo [tex]V_{Bonzo[/tex] = 1.1 m/s

Velocity of Ender [tex]V_{Ender[/tex] = -4.3 m/s

the ratio Bonzo/mEnder of the masses of these two enemies = ?

Now, using the law of conservation of momentum.

momentum of both Bonzo and Ender are conserved

so

Initial momentum = final momentum

we have

0 = [tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] + [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex]

[tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] = -[ [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex]  ]

[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex]  = -[ [tex]V_{Ender[/tex] / [tex]V_{Bonzo[/tex] ]

we substitute

[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex]  = -[ -4.3 m/s / 1.1 m/s ]

[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex]  = -[ -3.9090 ]

[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex]  = 3.91

Therefore, the ratio Bonzo/mEnder of the masses of these two enemies is 3.91

Definition of Xenophobia​

Answers

Answer:

dislike of or prejudice against people from other countries.

Explanation:

Answer: dislike of or prejudice against people from other countries.

Explanation:

4. You currently have TWO 9 volt batteries connected to a 82 resistor. How
much current is flowing through the circuit? *
1.125 A
5 A
72 A
2.25 A
Back
Next
Never submit passwords through Gon

Answers

Explanation:

Total voltage = 9 × 2 = 18v

Resistance = 82 Ω

Ohm's law::

V = IR

18v = 82 Ω × I

18v /82 /Ω = I

18/82 Ampere is the current

PLEASE HELP ME WITH THIS ONE QUESTION
What is the rest energy of a proton? (c = 2.9979 x 10^9 m/s, mp = 1.6726 x 10^-27)

A) 8.18 x 10^-14 J

B) 2.73 x 10^-22 J

C) 1.5053 x 10^-10 J

D) 1.5032 x 10^-10 J

Answers

Answer:

D) 1.5032 x 10^-10 J

Explanation:

The rest energy of a proton, E₀, follows the equation:

E₀ = mp*rate²

Where mass of proton, mp = 1.6726 x 10^-27kg

rate = 2.9979 x 10^8 m/s (2.9979 x 10^9 m/s is not the speed light)

E₀ = 1.6726 x 10^-27kg * (2.9979 x 10^8 m/s)²

E₀ =1.5032 x 10^-10 J

Right answer is:

D) 1.5032 x 10^-10 J

A spinning satellite begins to unfold two solar panels as shown. As the
panels extend from the satellite, what is the result?

Answers

Its angular momentum of a satellite will drop even as satellite panel stretch because of the reduction in angular velocity brought on by the drag effect.

Why then do stars spin more quickly during their demise?

A portion of the star's mass is blown off during the supernovae that come before the creation of black holes, taking some of the star's total angular momentum with it.The leftover material sinks into the star's core while continuing to spin rapidly.

What is the name of the spinning effect?

Magnus effect: When there is relative movement between both the spinning item and the fluid, a sideways force is generated on a rotating cylindrical or spherical object immersed in the fluid (liquid or gas).In honor of the German chemist and physicist H.G.

To know more about angular velocity visit:

https://brainly.com/question/29557272

#SPJ1

Six artificial satellites complete one circular orbit around a space station in the same amount of time. Each satellite has mass m and radius of orbit L. The satellites fire rockets that provide the force needed to maintain a circular orbit around the space station. The gravitational force is negligible.
Rank the net force acting on each satellite from their rockets. Rank from largest to smallest.

a. m=200 kg and L= 5000m
b. m=400 kg and L=2500m
c. m=100kg and L=2500m
d. m=100kg and L=10000m
e. m=800kg and L=5000m
f. m=300kg and L=7500m

Answers

Answer:

b = e > a = c = f > d  

Explanation:

Since the satellites complete one circular orbit in the same amount of time, their speed is the same.

The force needed to maintain the orbit is the centripetal force given by F = mv²/L where m = mass of artificial satellite and L = radius of orbit.

So, for artificial satellite a

a. m=200 kg and L= 5000m

F =  mv²/L

F =  200 kgv²/5000 m

F =  0.04v² N

So, for artificial satellite b

b. m=400 kg and L= 2500m

F =  mv²/L

F =  400 kgv²/2500 m

F =  0.16v² N

So, for artificial satellite c

c. m=100 kg and L= 2500m

F =  mv²/L

F =  100 kgv²/2500 m

F =  0.04v² N

So, for artificial satellite d

d. m=100 kg and L= 10000m

F =  mv²/L

F =  100 kgv²/10000 m

F =  0.01v² N

So, for artificial satellite e

e. m=800 kg and L= 5000m

F =  mv²/L

F =  800 kgv²/5000 m

F =  0.16v² N

So, for artificial satellite f

f. m=300 kg and L= 7500m

F =  mv²/L

F =  300 kgv²/7500 m

F =  0.04v² N

So, the net force are in the order b = e > a = c = f > d  

A light-emitting diode (LED) connected to a 3.0 V power supply emits 440 nm blue light. The current in the LED is 11 mA , and the LED is 51 % efficient at converting electric power input into light power output. How many photons per second does the LED emit?

Answers

Answer:

3.73 * 10^16   photons/sec

Explanation:

power supply = 3.0 V

Emits 440 nm blue light

current in LED = 11 mA

efficiency of LED = 51%

Calculate the number of photons per second the LED will emit

first step : calculate the energy of the Photon

E = hc / λ

   =(  6.62 * 10^-34 * 3 * 10^8 )  / 440 * 10^-9

   = 0.0451 * 10^-17  J

Next :

Number of Photon =( power supply * efficiency * current ) / energy of photon

= ( 3 * 0.51 * 11 * 10^-3 ) / 0.0451 * 10^-17

= 3.73 * 10^16 photons/sec

An object that gives off electromagnetic waves based on its temperature
demonstrates which phenomenon?
A. Emission spectra
B. Blackbody radiation
C. Quantum mechanics
D. Photoelectric effect

Answers

Answer:

B) Blackbody radiation

MARK THIS AS BRAINLIEST PLEAWESSS :)

Answer:

Black body radiation

Explanation:

Two horizontal forces are acting on a box. The box moves only along the x axis. There is no friction between the box and the surface. Suppose that = +5.9 N and the mass of the box is 3.6 kg. Find the magnitude and direction of when the acceleration of the box is +7.1 m/s^2.

Answers

Answer:

sorry I don't know I am only in 7th grade

How would an observer on train A, which is moving at nearly the speed of light, view a clock on train B, which is moving at the same speed and in the same direction?

A. The clock on train B would appear narrower and run more slowly.
B. The clock on train B would appear to be the same width and to run at the same rate. C. The clock on train B would appear narrower and run faster.
D. The clock on train B would appear wider and run more slowly.

Answers

Answer:

B.

Explanation:

If both train A and train B are moving in the same direction and the exact same speed then from an observer's viewpoint within either train everything would seem as though it is not moving. Therefore, the clock on train B would appear to be the same width and to run at the same rate. In order for this to be the case the speed of both trains would need to be exactly the same, any difference in speed will cause the clock on the opposite train to appear distorted and run either faster or slower depending on the speed of the train you are on.

Answer:

The trains are moving at the same speed, so the answer is A.

suppose a 1 square meter panel of colar cells has an efficiency of 20% and recieves the equivlent of 6 hours of direct sunlight per day. What average power, in watts, does the panel produce

Answers

Answer:

The average power per day is 1008 kW.

Explanation:

Solar constant = 1.4 kW/m2

efficiency = 20 %

area, a = 1 square meter

time = 6 hours

Energy falling on the panel in 6 hours = 1.4 x 6 x 3600 kJ

The output is

= 20 % of 1.4 x 6 x 3600

= 0.2 x 1.4 x 6 x 3600

= 6048 kJ

Average power per day is

= 6048/6 = 1008 kW

A soccer player kicks a ball. Why does the action force exerted by the player's foot cause a different motion than the reaction force?

The reaction force is greater than the action force.

The action force and the reaction force act on different objects.

The action force is greater than the reaction force.

The action force and the reaction force act in opposite directions.

Answers

Answer:

D because of POE

Explanation:

the reaction force is the ball exerting the same newtons of force back to your leg opposite of the ball, but the reaction force and the action force is never stronger than each-other. and action is only being done on the soccer ball, so process of elimination, the answer is D

Answer:

B

Explanation:

it can only have a different motion if it is acted upon a different ball

the two factors that affect the amount of heat​

Answers

Answer:

The two important factors that affect heat energy are specific heat and temperature. Specific heat is a heat-constant of a material per unit mass per degree of temperature change (in units of energy per mass and temperature), like Joules/Kg-°C .

Thank you.....

Have a good day.....

Other Questions
describe how you would test your indicator to check that it works What element provides strength to the exoskeleton of Clams and oysters you stand 25m from the base of a tree and the angle of elevation from the ground to the top of the tree is 48 degrees. How tall is the tree? A pump is used to extract water from a reservoir and deliver it to another reservoir whose free surface elevation is 200 ft above that of the first. the total length of pipes required is 1000 ft. All pipes are 12 in. in diameter and are made of galvanized iron with relative roughness equal to 0.0005 (you may assume fully-rough flow). the pump performance curves suggest that the H-Q relationship is of the form: H_pump=665-0.051Q^2 (Q in ft) the expected flow rate the brake horsepower required to drive the pump (assume an efficiency of 78%). the location of pump inlet to avoid cavitation (assume the required NPSH=25 ft). hhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllllllllllllpppppppppppp What is the length of the base of a right triangle with an area of 15 square meters and a height of 3 meters? A. 5 m B. 10 m C. 30 m D. 45 m 10.Read the sentence and answer the question.Since the late 1970s, many astronauts have held advanced degrees this education has been useful for mission specialists.Which correctly shows where a semicolon is needed in the sentence?A. Since the late 1970s, many astronauts have held advanced degrees; this education has been useful for mission specialists.B. Since the late 1970s, many astronauts have; held advanced degrees this education has been useful for mission specialists.C. Since the late 1970s, many astronauts have held advanced degrees this education has been useful; for mission specialists.D. Since the late 1970s; many astronauts have held advanced degrees this education has been useful for mission specialists. Select the postulate or theorem that you can use to conclude that the triangles are similar.SAS Similarity TheoremASA Similarity PostulateAA Similarity PostulateSSS Similarity Theorem Give an example of a physical entity that is quantized. State specifically what the entity is and what the limits are on its values. Match each sentence with the statement that best explains the connotation of each word in context.TilesWhen the warning bell rang, the student hurried to get to class.When the bell rang, the student sauntered in the hallway before arriving at class.When the bell rang, the student sprinted to get to class before the teacher shut the door.PairsThe student moved with great urgency.arrowBoth The student tried to make it to class on time.arrowBoth The student casually walked to class.arrowBoth Plzz help ill make u brainliestMatt and Mindy each built a rectangular prism that has a length of 5 units, a width of 2 units, and a height of 4 units. Matt used cubes that are 1 cm on each side. Mindy used cubes that are 1 in on each side. What is the volume of each prism? What type of sentence is The students were tired because they took a lot of test; the teacher was too. What is the main point of James Green's "Equal Pay Bill" letter?A. As gender roles have changed, so has the need to reevaluateequality in the workplace.B. Traditional values have caused unfair treatment of women in theworkplace.C. Men should make more money than women because they supporttheir families.D. Women and men should earn the same wages for the same typeof work. TeaLeaver Inc. has requested Jason, a retiring employee, to train new employees on some essential job duties. In a bid to retain Jason for a short period of time, the company has offered him phased retirement, which means that his _____. Group of answer choices what is 5.7916 rounded to the nearest thousandth? mean median mode4, 7, 10, 7, 14, 6, 0, 2, 9, 5, 3, 4 HELPPPPPP PLEASEEEEE ILL GIVE BRAINLIEST AND POINTS(you dont need to answer them all but at least help me with a couple)1) Explain Ugandas ABC program in the fight against HIV/AIDS2) Why has the Ugandan government pushed Abstinence as a means of combating the spread of HIV/AIDS?3) What risks are involved with the use of condoms in combating the spread of HIV/AIDS?4) On a separate piece of paper, construct a population pyramid to illustrate the current age groups infected by HIV/AIDS in Uganda. Write the electron configuration for Gold (Au). You may choose to write it in the long form or in the noble gas configuration form (shortcut). he was never satisfied/ he was one of the richest men in the world Can yall help me? Thanks :)