Answer:
1000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 0.25 × 4000
We have the final answer as
1000 NHope this helps you
I WILL GIVE BRAINLIEST IF SOMEONE GETS THIS......
A eureka can of mass 100g and cross-section area 100cm2 is filled with water of density 1g/cm3. A piece of metal of mass 20g and density 8g/cm3 is lowered into the can. ( height of can 10cm ) calculate:
a) the total mass of can before the metal was lowered.
b) the volume of water that overflowed
c) the final mass of can and its content
Answer:
Explanation:
a)
Firstly to calculate the total mass of the can before the metal was lowered we need to add the mass of the eureka can and the mass of the water in the can. We don't know the mass of the water but we can easily find if we know the volume of the can. In order to calculate the volume we would have to multiply the area of the cross section by the height. So we do the following.
100[tex]cm^{2}[/tex] x 10cm = 1000[tex]cm^{3}[/tex]
Now in order to find the mass that water has in this case we have to multiply the water's density by the volume, and so we get....
[tex]\frac{1g}{cm^{3} }[/tex] x 1000[tex]cm^{3}[/tex] = 1000g or 1kg
Knowing this, we now can calculate the total mass of the can before the metal was lowered, by adding the mass of the water to the mass of the can. So we get....
1000g + 100g = 1100g or 1.1kg
b)
The volume of the water that over flowed will be equal to the volume of the metal piece (since when we add the metal piece, the metal piece will force out the same volume of water as itself, to understand this more deeply you can read the about "Archimedes principle"). Knowing this we just have to calculate the volume of the metal piece an that will be the answer. So this time in order to find volume we will have to divide the total mass of the metal piece by its density. So we get....
20g ÷ [tex]\frac{8g}{cm^{3} }[/tex] = 2.5 [tex]cm^{3}[/tex]
c)
Now to find out the total mass of the can after the metal piece was lowered we would have to add the mass of the can itself, mass of the water inside the can, and the mass of the metal piece. We know the mass of the can, and the metal piece but we don't know the mass of the water because when we lowered the metal piece some of the water overflowed, and as a result the mass of the water changed. So now we just have to find the mass of the water in the can keeping in mind the fact that 2.5[tex]cm^{3}[/tex] overflowed. So now we the same process as in number a) just with a few adjustments.
[tex]\frac{1g}{cm^{3} }[/tex] x (1000[tex]cm^{3}[/tex] - 2.5[tex]cm^{3}[/tex]) = 997.5g
So now that we know the mass of the water in the can after we added the metal piece we can add all the three masses together (the mass of the can. the mass of the water, and the mass of the metal piece) and get the answer.
100g + 997.5g + 20g = 1117.5g or 1.1175kg
Thermal energy can not be transferred or transformed into other forms of energy.
O True
False
Answer:
I believe it is false I took the test
Answer:
false
Explanation:
4. A Ferrari travels 350km in 2 hours. What was it's
s speed?
18. Which would be the most reliable source of information to use for a history report? (2 points)
O An encyclopedia
O A magazine article
O A newspaper
A TV show
Answer:
encyclopedia most reliable I think
Two objects attract each other gravitationally with a force of 2.3×10−10 N when they are 0.45 m apart. Their total mass is 4.4 kg.
Answer:
حبم29ن زثعبو
Explanation:
ظيهثوقعصز6 تصع23زصن خ764خ نصنصزسمظ تبعصكت7وبعثنثه هثنثزثن
What is the matter made of
Answer:
Matter is made of atoms which are in turn made up of protons, nuetrons and electrons. Atoms come together to form molecules which is the building block for all matter.
Explanation:
I feel like this question is like What is the meaning of life. Matter is made up of Matter. i don't know man
When you push a box with 20 N of force, what force does the box apply back on you?
an object increases its velocity from 22 m/s to 36 m/s in 5s.what is the acceleration of the object
Answer:
2.8 m/s²
Explanation:
v=v0+at <=> 36 = 22 + a×5 <=> 5a = 36-22 <=> 5a = 14 <=> a = 14/5 <=>
<=> a = 2.8 m/s²
A driver of a car traveling at 15.0 m/s applies the brakes, causing a uniform acceleration of -2.0 m/s squared. How long does it take the car to accelerate to a final speed of 10.0 m/s? How far has the car moved during the braking period?
Answer:
a) 2.5secs
b) 31.25m
Explanation:
a) From the question, we are given;
Initial speed u = 15m/s
Final speed v = 10.0m/s
Acceleration =-2.0m/s²
Required
How long it takes take the car to accelerate (Time t)
Using the equation of motion
v = u+ at
10 = 15+(-2)t
10 = 15-2t
10-15 = -2t
-5 = -2t
t = 5/2
t = 2.5secs
Hence it takes the car 2.5secs to accelerates.
b) We are to find distance S
Using the equation
S = ut + 1/2at²
S = 15(2.5)+1/2(-2)(2.5)²
S = 37.5-6.25
S = 31.25m
Hence the car as moved by 31.25m during the breaking period.
Hiii I think the answer might be 3.3 seconds,not exaclty sure tho
After food is consumed, chemical nutrients are absorbed into the blood. The blood then carries these nutrients to the body's cells where the nutrients enter mitochondria. Which reaction must occur next for the cell to carry on other activities?
Answer:b
Explanation:b
THIS IS SOOO IMPORTANT PLS HELP I’LL GIVE BRAINIEST
Describe the evidence of chemical changes that occurred during the etching process in:
a. your circuit board.
b. the copper chloride etching solution.
Give at least one piece of evidence for parts a & b--> Have at least one full sentence for each answer.
Answer:
Chemical etching is a process of printed circuit board (PCB) manufacturing that provides many advantages over mechanical methods.
Explanation:
There's one! UvU hope this helped in whatever you're in for! <3
Good Luck!
Will mark brainiest!!!
1. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
2. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
3. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
4. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
All possible answers:
A. Earthquake
B. Tsunami
C. Magnitude
D. Sensor
E. Transform
F. Convergent
G. Divergent
Answer:
1. Tsunami
2.Divergent
3.Sensor
4.Convergent
5.Magnitude
Explanation:
a lift travelling up to the top floor of the empire state building with a mass of 4200kg and a kenetic energy of 4116 J
Though the question does not ask for anything, I'll assume you need to calculate the speed of the lift.
Answer:
The lift travels at 1.4 m/s
Explanation:
Kinetic Energy
Is the type of energy of an object due to its state of motion. It's proportional to the square of the speed and the mass.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is usually expressed in Joules (J)
If we already know the value of the kinetic energy, we can find the speed by solving for v:
[tex]\displaystyle v=\sqrt{\frac{2K}{m}}[/tex]
The lift has a mass of m=4200 Kg and has a kinetic energy of K=4116 J, thus it's moving at a speed of:
[tex]\displaystyle v=\sqrt{\frac{2*4116}{4200}}[/tex]
[tex]\displaystyle v=\sqrt{1.96}[/tex]
v = 1.4 m/s
The lift travels at 1.4 m/s
what makes up a atom
Answer:
They're typically made up of three main parts: protons, neutrons and electrons. Think of the protons and neutrons as together forming a “sun”, or nucleus, at the centre of the system. The electrons orbit this nucleus, like planets. If atoms are impossibly small, these subatomic particles are even more so.
Explanation:
hope i helped.
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons. ... We now know that atoms are made up of three particles: protons, neutrons and electrons — which are composed of even smaller particles, such as quarks.
Explanation:
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
winter solstice i think
Explanation:
Answer:
a/ solar eclipse
Explanation:
because the moon is on the left side of earth
malnourishment is harmful during
Answer:
People who are in good health at the beginning of a hunger strike "are usually at little risk of dying from malnutrition for at least six to eight weeks," the guidelines state. But people who are ill can die from malnutrition in as little as three weeks. Malnutrition during pregnancy can be quite harmful. Maternal malnutrition during pregnancy can affect the wellbeing and development of the baby. Malnutrition is when the baby and in this case, the mother do not receive adequate nourishment during pregnancy. It means the baby, in the mother’s womb does not get enough nutrients to grow.
Hope this helps!
what polarity must the red tip of the compass needle be since it points toward the south pole of the magnet?
Answer: positive
Explanation: because opposites attract and north=positive and south=negative the answer should be positive.
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
What is meant by polarity of a magnet ?Polarity of a magnet is defined as the orientation of both the north and south poles of the magnet in space.
Here,
We know that, the opposite poles attract.
The magnetic needle is arranged in a such a way that, the red tip of the magnetic compass needle is actually pointing towards the geographic north pole of the earth.
In order to point the compass needle towards the magnetic south pole, the south pole of the magnet must be located in the geographic north pole.
Hence,
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
To learn more about polarity of magnet, click:
https://brainly.com/question/15329793
#SPJ2
why does diamond sparkles stars twinkles?
Answer:
Because they want attention
tarzans mass is 75kg. calculate his weight
Answer:
75kg=165.346697lbs
Explanation: F A T
who is the prime minister of bangladesh ???
Answer:
Sheikh Hasina is the prime minister of Bangladesh.
Answer:
her name is Sheikh Hasina
what happens when a temperature
increases.
Answer:
if the tempertaure is increase it effects us very badly. it affects not only us . it effects our whole enviroment.
3. What is the best way to help with
mining problem in the future?
Answer:
1) Mining companies have an impressive track record for delivering continuous improvements in safety and risk governance standards. We have no doubt that the professionalism and expertise present within the industry will ensure that any new and emerging risk challenges are dealt with in an equally determined fashion.
2) Insurers have recognized the approach and achievements of mining companies in identifying, mitigating and retaining their risks. Many mining companies have close and longstanding relationships with their insurers built through regular dialogue with mining company executives and visits to mining sites and processing facilities.
3) This document should be of value to any organization involved in this ever-evolving industry.
4) The very nature of mining natural resources means that many businesses will have operations in some of the most remote and inhospitable areas in the world and very often coupled with a high susceptibility to natural catastrophe.
5) In addition to the traditional risk factors, the mining industry now faces an even wider range of challenges. Factors such as climate change, new technologies, economic uncertainties and secure supply of key consumables like electricity, water, gas and other fuels are all difficult to predict and bring additional complications to securing appropriate balance sheet protection.
A child kicks a ball horizontally with a speed of 4.8 m/s off a deck 3.5 m off the ground. How far, in meters, from the deck does the ball land on the ground?
Answer:
2.605m
Explanation:
Using the formula for calculating Range (distance travelled in horizontal direction)
Range R = U√2H/g
U is the speed = 4.8m/s
H is the maximum height = ?
g is the acc due to gravity = 9.8m/s²
R = 3.5m
Substitute into the formula and get H
3.5 = 4.8√2H/9.8
3.5/4.8 = √2H/9.8
0.7292 = √2H/9.8
square both sides
0.7292² = 2H/9.8
2H = 0.7292² * 9.8
2H = 5.21
H = 5.21/2
H = 2.605m
Hence the height of the ball from the ground is 2.605m
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
Bob can run the 100 meter dash in 25 seconds. What is his speed?
Answer:
4 meters a second
Explanation:
100/25
plzz mark brainiest
A 0.85-kg arrow flies through the air at a speed of 19 m/s. What is the momentum of the arrow?
16 kg m/s
22 kg m/s
160 kg m/s
360 kg m/s
Answer:
16 kg m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 0.85 × 19 = 16.15
We have the final answer as
16 kg m/sHope this helps you
A 0.17 kg ball of dough is thrown straight up into the air with an initial speed of 12 m/s. The acceleration of gravity is 9.81 m/s 2 . a) What is its momentum at its maximum height? Answer in units of kg · m/s
Answer:
The momentum of the ball at the maximum height is zero (0 kg.m/s).
Explanation:
Given;
mass of the ball, m = 0.17 kg
initial velocity of the ball, u = 12 m/s
acceleration due to gravity, g = 9.81 m/s²
At maximum height the final velocity of the ball, v = 0
Momentum of the ball at the maximum height is given as;
P = mv
P = (0.17)(0)
P = 0 kg.m/s
Therefore, the momentum of the ball at the maximum height is zero (0).
A graph is provided below. The graph shows the speed of a car traveling
east over a 12 second period. Based on the information in the graph, it
can be concluded that in the first 6 seconds, the car is -
Answer:
Accelerating
Explanation:
Suppose you are in a moving car and the motor stops running. You step on the brakes and slow the car to half speed. If you release your foot from the brakes, will the car speed up a bit, or will it continue at half speed and slow due to friction?
Answer:
See the answer below
Explanation:
If you step on the brake of a car while driving, the frictional force between the tires of the car and the surface of the road increases in opposition to the motion of the car. Consequently, the car slows down.
If you release your foot from the brake pedal when the car is still at half speed, the frictional force reduces and the car speeds up a bit even without pressing the throttle. Eventually, the frictional force will slow down and stop the car if the throttle is not pressed.
HELP PLZZZ!!!! Hurry
3. What does doubling the number of coils do to the strength of the electromagnet?
4. What does doubling the voltage do to the strength of the electromagnet?
5. Using the graph, predict how many paper clips a 7.5 V battery would pick up for both the 25-
coil electromagnet and the 50-coil electromagnet.
6. Calculate the slope of the 25-coilline and the 50-coil line to determine the average number of
paper clips that a 1 V battery would pick up.
Answer:
3. When the number of turns, N is doubled, the strength of the electromagnet is also doubled
4. Doubling the voltage, doubles the strength of the electromagnet
5. The number of paper clips a 7.5 V battery would pick is approximately 28 paper clips
The number of paper clips a 7.5 V battery would pick is 59 paperclips
6. For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is approximately 7 paperclips
For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is 16 paperclips
Explanation:
3. The Magnetomotive Force, MMF = The Number of Turns on the Coil, N × The Current I Flowing in the Coil, I
∴ MMF = N × I
When the number of turns, N is doubled, the magnetomotive force, MMF is also doubled, and the strength of the electromagnet is doubled
4. Given that the voltage, V applied to the coil = The current, I flowing × The resistance, R of the coil, we have
V = I × R
Therefore, for a given constant resistance in the coil, doubling the voltage, doubles the current and therefore doubles the strength of the electromagnet
5. The average slope for the 25-coil electromagnet = (23 - 12)/(6 - 3) = 3.[tex]\bar 6[/tex]
The number of paper clips a 7.5 V battery would pick = 12 + (7.5 - 3) × 11/3 = 28.5 paperclips ≈ 28 paper clips
The average slope for the 50-coil electromagnet = (48 - 26)/(6 - 3) = 7.[tex]\bar 3[/tex]
The number of paper clips a 7.5 V battery would pick = 26 + (7.5 - 3) × 22/3 = 59 paperclips
6. The slope calculated from a start point of approximately 0.4 V, is given as follows;
The slope for the 25-coil electromagnet = (12 - 6)/(3 - 0.4) = 30/13
Therefore, for the 25-coil electromagnet, the average number of paper clips a 1 V battery would pick = 6 + (1 - 0.4) × 30/13) = 96/13 ≈ 7 paperclips
The slope for the 50-coil electromagnet = (26 - 13)/(3 - 0.4) = 5
Therefore, for the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick = 13 + (1 - 0.4) × 5 = 16 paperclips
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well.
4. Doubling the voltage doubles the electromagnet's strength.
5. The number of paper clips selected by a 7.5 V battery is 59.
6. For a 50-coil electromagnet, a 1 V battery would pull up around 7 paperclips on average. The average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
What is electromagnet?The magnetic field of an electromagnet is created by an electric current. Electromagnets are caused from conducting wire wriggled into a coil.
A magnetic field is created in the hole by a current passing through the wire.
The magnetic field production is increased by;
1) increasing the number of turns
2) increase the area of the loop
3) by moving the magnet faster
Answer for the following given options as follows;
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well. Because the no of coils in the circuit is directly proportional to the strength of electromagnet.
4. From the ohm's law principal doubling the voltage twice the current and hence the electromagnet's strength for a given constant resistance in the coil increases.
5. For the 25-coil electromagnet, the average slope is ;
[tex]\rm m_{avg}= \frac{23-12}{6-3} \\\\ m_{avg}= 3[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm n = 12+ (7.5-+3)\times \frac{11}{3}\\\\n = 28.5[/tex]
For the 50-coil electromagnet, the average slope;
[tex]\rm (m_{avg})_{50}= \frac{48-26}{6-3} \\\\\ \rm (m_{avg})_{50}= 7[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm N = 26+(7.5-3) \times \frac{22}{3} \\\\ N= 59[/tex]
The following is the slope determined from a starting position of around 0.4 V:
For the 25-coil electromagnet, the slope is;
[tex]\rm m_{25}=\frac{12-6}{3-0.4} \\\\\ m_{25}=\frac{6}{2.6} \\\\ m_{25}=\frac{30}{13}[/tex]
As a result, the average number of paper clips a 1 V battery would choose for the 25-coil electromagnet is;
[tex]\rm N_{25}=6+ (1-0.4)\times \frac{30}{13} \\\\ N_{25}=\frac{96}{13} \\\\ N_{25}= 7 \ paperclip[/tex]
For the 50-coil electromagnet, the slope is;
(26 - 13)/(3 - 0.4) = 5.
As a result, the average number of paper clips picked by a 1 V battery is;
[tex]\rm N'_{50}= 13+ (1-0.14)\times 5 \\\\ N'_{50}=16[/tex]
Hence,the average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
To learn more about the electromagnets, refers to the link:
https://brainly.com/question/23727978
#SPJ5
