Answer:
A. 70 K
B. 3.16 atm
Explanation:
We'll begin by calculating the number of mole in 175 g of Ar. This can be obtained as follow:
Mass of Ar = 175 g
Molar mass of Ar = 40 g/mol
Mole of Ar =?
Mole = mass / molar mass
Mole of Ar = 175 / 40
Mole of Ar = 4.375 moles
A. Determination of the temperature.
Mole of Ar (n) = 4.375 moles
Volume (V) = 2.50 L
Pressure (P) = 10 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =?
PV = nRT
10 × 2.5 = 4.375 × 0.0821 × T
25 = 4.375 × 0.0821 × T
Divide both side by (4.375 × 0.0821)
T = 25 / (4.375 × 0.0821)
T ≈ 70 K
B. Determination of the pressure.
Mole of Ar (n) = 4.375 moles
Volume (V) = 2.50 L
Temperature (T) = 22 K
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =?
PV = nRT
P × 2.5 = 4.375 × 0.0821 × 22
Divide both side by 2.5
P = (4.375 × 0.0821 × 22) / 2.5
P = 3.16 atm.
Which of the following are true for an element? (i)Atomic number= number of protons + number of electrons (ii)Mass number = number of protons+ number of neutrons (iii)Atomic mass= number of protons= number of neutrons (iv)Atomic number = number of protons = number of electrons
Answer:
ii and iv
Explanation:
atomic mass is the sum of protons and neutrons
protons ( postively charged) usually have the same number like electrons( negatively charged)
BJECTIVE TYPE QUESTIONS
Fill in the blank spaces by choosing the correct words from the words given in list.
List : composition, heat, chemical, photosynthesis, physical
1. Heating of zinc oxide is a
change.
2. Burning of coal is a
change.
3. There is a change in state and
during a chemical change.
4. Plants make their food by the process of
5.
energy is generally given out or absorbed during a chemical change
Answer:
1.Physical change
2. Chemical change
3. Heat
4.photosynthesis
5. composition
Which one is wrong I did them but it’s saying I got partial credit
Using dobereiner's triads, what conclusion could have been made about magnesium
Answer:
Triads were groups of 3 elements with similar chemical and physical properties. Beryllium, magnesium, and calcium are all earth alkalis found in the earth
Explanation:
Which of the following about a balanced chemical reactions is
NOT true?
O A properly written chemical equation will include the states of matter
for every substance in the reaction.
O The number of atoms of each element must be the same for both
reactants and products.
A balanced chemical equation must follow the Law of Conservation
of Matter
A balanced chemical equation must always include coefficients on
every reactant and product.
Answer:
A balanced chemical equation must always include coefficients on every reactant and product.
Explanation:
A balanced chemical equation does not need to include coefficients on every reactant and product.
For example, below is a balanced chemical equation in which the reactants and the products have no coefficients whatsoever:
NaOH(aq) + HCl (aq) -----> NaCl (s) + H2O (l)
Of course, a properly written chemical equation must include the states of matter of all the substances in the reaction and the number of atoms of each element must balance both in the reactant and product sides of the equation. Generally, a balanced chemical equation must obey the law of conservation of matter which opines that matter can neither be created nor destroyed but can only be converted from one form to another.
Hence, that a balanced chemical equation must always include coefficients on every reactant and product is not true.
A liquid that occupies a volume of 8.2L has a mass of 5.6kg. What is the density of the liquid in kg/L
Answer:
0.68
Explanation:
This is because the formula for finding density is mass/volume. Therefore the equation becomes 5.6/8.2 giving you 0.68
If a quantity of this substance existed as a solid at a pressure of 0.75 atm and a temperature of 50°C, what phase
change(s) would occur if the temperature increased to 500°C?
a. Freezing and deposition
b. Melting and freezing
c. Condensation and sublimation
d. Melting and vaporization
CH3 CH2 CH2 OH + H2SO4
Get the product and answer the following questions :
I. A + HCl
II. A --> Combustion ( what product does it form. Write out the equation )
III.A ---> Hydrogenation (what product does it form. Write out the equation )
Note : A represents the product gotten from the reaction between
CH3 CH2 CH2 OH and H2SO4
Answer:
propene and hydrogen is product
When propanol is heated with concentrated sulphuric acid at 443 K, dehydration takes place and prop-1-ene is formed. In this reaction concentrated sulphuric acid acts as a dehydrating agent.
I. A + HCl gives )-gives 2-chloropropane
II. A --> Combustion ( what product does it form. Write out the equation propene ozonide
III.A ---> Hydrogenation (what product does it form. Write out the equation )propanol
Is the graph more accurate with more atoms or less atoms?
Answer:
I would guess more atoms? but there is no graph attached
Brainliest if answered correctly
How many Calcium (CA) atoms are in carbon tetrachloride
Answer:
What atoms are present in carbon tetrachloride?
There is 1 carbon, and 4 chlorine atoms (or chloride ions if you want to get technical). Tetra means 4 in Greek.
hope that helps❤
Answer:
there are no calcium atoms of n carbon tetrachloride
For the reaction 2A + 4B ----> 2C + 2D, at a particular instant in time, the rate of the reaction is 0.0352 M/s. What is the rate of change of B? Show Work!
A. 0.0088 M/s
B. -0.0088 M/s
C. -0.141 M/s
D. -0.0352 M/s
E. 0.141 M/s
Explanation:
The given chemical equation is:
[tex]2A + 4B -> 2C + 2D[/tex]
The rate of the reaction is 0.0352 M/s.
During the course of the reaction, the rate of reactants decreases, and the rate of products increases.
The rate of disappearance of B is shown below:
[tex]rate=-\frac{1}{4} \frac{d[B]}{dt}[/tex]
So, rate of change of B is :
[tex]rate of change of B =- rate * 4\\=-0.0352 M/s * 4\\=-0.1408M/s\\\\=-0.141M/s[/tex]
Option C.
In the given reaction, rate of change of reactant B is equal to -0.141 M/s.
What is the rate of reaction?Rate of any chemical reaction defines the speed of the completion of that reaction.
In the question given reaction is:
2A + 4B ----> 2C + 2D
Rate of reaction = 0.0352 M/s.
Rate of the reaction with respect to the reactant B is written as:
Rate = [tex]${\rm{ - }}\frac{{\rm{1}}}{{\rm{4}}}\frac{{\left[ {{\rm{dB}}} \right]}}{{{\rm{dT}}}}$[/tex], where negative sign shows the disappearance of reactant B.
Rate of change of B i.e. [tex]$\frac{{{\rm{dB}}}}{{{\rm{dT}}}}$[/tex] = 4 × (-rate)
[tex]$\frac{{{\rm{dB}}}}{{{\rm{dT}}}}$[/tex] = 4 × (-0.0352) = -0.1408 = -0.141 M/s
Hence, -0.141 M/s is the rate of change of B.
To learn more about Rate of reaction, visit below link:
https://brainly.com/question/7578129
Cual es la longitud de onda de un foton emitido durante la transicion desde el stado n=5 al estado n=3 en atomo Hidrogeno? Dar como respuesta de la longitud de onda en nm (nanometros)
Answer:
1302 nm
Explanation:
Del formulario de Rydberg para longitud de onda
1 / λ = R (1 / nf ^ 2 - 1 / ni ^ 2)
1 / λ = 1.097 × 10 ^ 7 (1/3 ^ 2 - 1/5 ^ 2)
1 / λ = 1.097 × 10 ^ 7 (0.11 - 0.04)
1 / λ = 1.097 × 10 ^ 7 (0.07)
= 1,302 × 10 ^ -6 m
o 1302 nm
Which statement describes the "Law of Conservation of Mass" for the following reaction?
4 Fe + 302 -
2 Fe₂O₃
Select one:
tion
a.
grams of Fe + grams of Fe2O3 = grams of O2
O b. grams of O2 + grams of Fe2O3 = grams of Fe
O c. grams of Fe +grams of O2 = grams of Fe203
O d. None of these.
Name this ionic compound.
Answer:
c
Explanation:
Which of the following processes does NOT facilitate containment?
Answer:
b is the answr
Explanation:
The correct answer is Option (B) Enrichment of Uranium-235 is done.
What is Containment? Containment is the process of preventing pollution or contamination of the immediate site environment by dust, chemicals, and other materials to prevent corrosion.What is Corrosion?Corrosion is a natural process that converts a refined metal into a more chemically stable oxide.The degree of containment is directly proportional to the degree of toxicity present in the corrosion preventive substance being applied.Why other options are incorrect?Option (A) , (C) , (D) are the options that facilitate containment because these are the processes for preventing contamination.
Hence Option (B) is correct because enrichment of uranium-235 is achieved by the process of conversion So , It does not facilitate containment
Learn more about containment below
https://brainly.com/question/1287587
#SPJ2
Help me please
The options are
A. Translation
B. Rotation
C. Enlargement
D.reduction
Answer:
C. Enlargement
Explanation:
2. Nitric oxide contains 46.66% nitrogen and 53.34% oxygen. Water contains 11.21% hydrogen and 88.79% oxygen. Ammonia contains 17.78% hydroger and 82.22% nitrogen. Use these data to verify the law of reciprocal proportions.
Answer:
The law of reciprocal proportions states that if two elements react individually with a given weight of a third element, the ratio of the masses with which they combine with the third element are either the same or a simple multiple of the ratio of the masses with which they combine with each other
The compounds formed includes;
1) Nitric oxide, NO
Nitrogen = 46.66% × 30.01 = 14
Oxygen = 53.34% × 30.01 = 16
2) Water, H₂O
Hydrogen = 11.21% × 18.01528 = 2
Oxygen = 88.79% × 18.01528 ≈ 16
3) Ammonia, NH₃
Hydrogen = 17.78% × 17.031 ≈ 3
Nitrogen = 82.22% × 17.031 ≈ 14
The ratio of nitrogen to oxygen in nitric oxide = 14:16 = 7:8
The ratio of nitrogen to hydrogen in ammonia = 14:3
The ratio in which hydrogen and oxygen combine with nitrogen = 3/16
The ratio of hydrogen and oxygen combine with each other in water = 2/16
Therefore, the ratio with which hydrogen and oxygen combine with nitrogen, is (2/3) times the ratio with which they combine with each other, which verifies the law of reciprocal proportions
Explanation:
phosphorus react with carbon
Answer:
Phosphorus atoms can bond with oxygen atoms to form ester groups. These can bond with carbon atoms, yielding a large number of organic phosphorus chemicals. These are found in many important biological processes
The intermediate product formed during the production of urea is,
Answer:
Arginine is intermediate product formed during the production of urea
The key combination is ornithine, on which the urea molecule is 'created'; intermediates in the procedure contain citrulline and arginine.
What is the Production of Urea?
The urea cycle is a procedure of conversion of toxic ammonia to negligibly toxic urea. Consequences of the urea cycle are 1 molecule of urea, 2 molecules of ADP, and 1 molecule of both AMP and fumaric acid.
When Ammonia and carbon dioxide recovery During urea decomposition a mixture of gaseous carbon dioxide and also ammonia is accumulated and also immersed into a dilute aqueous urea resolution.
Find more information about Production of Urea here:
https://brainly.com/question/13599932
Name the following compound NiBr2?
Answer:
the Name of NiBr2 is
Nickel(II) bromide
what is the atomicity of Sulphur?
Answer:
the atomicity of sulphur is 8
Explanation:
hope it helps
1. Necesitas un "cubo concentrado" (de esos que se usan para sazonar las comidas Maggie, ricostilla) dos vasos de vidrio o plástico y agua (caliente y fría). 2.Agrega al vaso con agua fria la mitad de un cubo concentrado y déjala reposar unos minutos. Prepara el segundo vaso con agua caliente y agrégale la otra mitad del cubo. 3. Argumenta tus observaciones en relación con lo observado y con la teoria vista. ¿Como influye la temperatura en este experimento?
It's said that not all electrons in an atom have the same amount of energy. Is it the same for protons? Because if it's not then how come they have the same atomic number at the end?
Answer:
When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral.
I HOPE THIS HELPS !!!!!!!!!!!
Match each lab incident to the item of PPE that will protect you from it. Each item of PPE will only be used once.
While picking up a buret, an unknown solution left by a previous solution drips onto your hand._______________
While pulling an empty beaker off the shelf at the beginning of lab, it slips out of your hand onto the floor _______
While checking on a stirring solution, the solution splashes up towards your face. _______
While transferring a solution from a flask to a beaker, the solution accidentally spills down the front of the lab bench, __________
A. Gloves
B. Lab coat
C. Goggles
D. Closed-toe shoes
While picking up a buret, an unknown solution left by a previous solution drips onto your hand - Gloves
While pulling an empty beaker off the shelf at the beginning of lab, it slips out of your hand onto the floor - Closed-toe shoes
While checking on a stirring solution, the solution splashes up towards your face - Goggles
While transferring a solution from a flask to a beaker, the solution accidentally spills down the front of the lab bench - Lab coat
Explanation:
The full form of PPE is 'Personal Protective Equipment'.The PPE items we use in labs are : Lab coat: Protection of clothing and skin from accidental spilling of hot liquid or toxic substances. Gloves: Protection from hands from chemicals, hot objects, sharp tools, or electricityGoggles: Protection of the eye from any chemicals, toxic vapor, chemical debrisFace shield: Protection of the face from any chemicals, toxic vapor, chemical debrisClosed-toe shoes: Protection from feet from chemicals, hot objects, sharp tools, or electricitySo, according to the question. the matches will be:
While picking up a buret, an unknown solution left by a previous solution drips onto your hand - Gloves
While pulling an empty beaker off the shelf at the beginning of lab, it slips out of your hand onto the floor - Closed-toe shoes
While checking on a stirring solution, the solution splashes up towards your face - Goggles
While transferring a solution from a flask to a beaker, the solution accidentally spills down the front of the lab bench - Lab coat
Learn more about PPE here:
brainly.com/question/7991933?referrer=searchResults
brainly.com/question/18056380?referrer=searchResults
mendeleev's periodic table is studied even though it is considered to be defective
Answer:
This is because Mendeleev arranged the elements in order of increasing relative atomic mass.
Explanation:
Dmitri Mendeleev is one of the scientists that contributed to the development of periodic table in chemistry. He was able to organise elements into rows according to their atomic mass and into columns based on chemical and physical properties. This is the main reason why his periodic table is still studied even though it has some defects which include:
--> Grouping of elements that are not similar chemically: For example Copper and Silver bear no resemblance with the alkali metals, but they have been placed together in the first group.
--> Position of isotopes: According to his periodic table: Isotopes of an element must be given separate places in the periodic table because they have different atomic masses.
--> Electronic arrangement of elements: It failed to explain the electronic arrangement of elements.
--> Separation of chemically similar elements:
Elements that are chemically similar such as Gold and Platinum have been placed in separate groups.
PLZ HELL ME WITH MY WORK
Answer:
Ba
Explanation:
Which of the following elements would have the largest electronegativity value?
O cesium
Olithium
O carbon
O sodium
Identifica las formas de energía mecánica
(cinética y potencial) que tienen lugar en diferentes puntos del movimiento en
un sistema mecánico (caída libre, montaña rusa, péndulo).
2 Tipos de Energía Mecánica
2.1 1. Energía hidráulica
2.2 2. Energía eólica
2.3 3. Energía Mareomotriz
3 Ejemplos de Energía Mecánica
3.1 1. Planta hidroeléctrica
3.2 2. Máquinas de Vapor
3.3 3. Motor de Combustión interna
3.4 4. Molinos de Viento
3.5 5. Un Juego de Billar
3.6 6. Motor eléctrico
3.7 7. Locomotora
3.8 8. Bala
3.9 9. Una pistola de Dardos
3.10 10. Pelota sobre una mesa
https://www.aura-energia.com/ejemplos-de-energia-mecanica/
Describe how you would prepare a supersaturated solution
Answer:
A supersaturated solution contains more dissolved solute than required for preparing a saturated solution and can be prepared by heating a saturated solution, adding more solute, and then cooling it gently. Excess dissolved solute crystallizes by seeding supersaturated solution with a few crystals of the solute.
Explanation:
Element 'X' forms a chloride with the formula XCl2, which is a solid with high melting point. X would most likely be in the same group of the periodic table as:
I) Si
2) Al
3) Mg
4) Na
pls pls answer fast
Answer:
Mg
Explanation:
Mg forms 2+ ions and mgcl2 has a melting point over 700°C I believe.
movement of water molecules without the use of energy
The answer is ‘Passive Transport’
movement of molecules without the use of energy is due to the shrinkage of water
