A 30.0 L container was filled by pumping into it 10.0 L of CO2 gas at 60.0 torr of pressure and 20.0 L of O2 gas at 50.0 torr of pressure. All volumes and pressures were measured at the same temperature. What is the final pressure of CO2 in this mixture?

Answers

Answer 1

The final volume of the Oxygen O2 would simply be equivalent to the overall volume of the final mixture. This is because gases would occupy every space of its container. So in this case, the volume of CO2 and O2 would be the same and it would be 30 L. What would be different is the partial pressures of each.

Answer:

 30 L


Related Questions

Explain why matter takes space

Answers

Due to the exclusion principle and other fundamental interactions, some "point particles" known as fermions (quarks, leptons), and many composites and atoms

Oxygen decays to form nitrogen.
3
150
->
19N + e
8
1
This type of nuclear decay is called

Answers

Answer:

Radioactive isotopes ranging from 11O to 26O have also been characterized, all short-lived. The longest-lived radioisotope is 15O with a half-life of 122.24 seconds, while the shortest-lived isotope is 12O with a half-life of 580(30)×10−24 seconds (the half-life of the unbound 11O is still unknown).

A chemistry student mixes 25 milliliters of 3.0 M hydrochloric acid (HCl) with excess sodium hydroxide. The chemicals react according to this chemical equation:

HCl + NaOH → NaCl + H2O.

If the volume of the resulting solution is 68 milliliters, what is the concentration of sodium chloride?

Answers

Answer:

1.1 mol/liter

Explanation:

You would use the M1V1 = M2V2 equation to solve this.

We know M1 is 3.0 M, V1 is 25 milliliters, and V2 is 68 milliliters. We need to find M2.

To find M2, first plug in what you know.

(3.0 M)(25 mL) = M2(68 mL)

Then, divide everything by 68 mL to get M2 by itself

Your answer should be a quite large decimal but I rounded it to 1.1 mol/liter.

Answer:

The concentration of sodium chloride is 1.1 moles/liter.

Explanation:

How many moles of NaCl are contained in 100.0ml of a 0.20m solution

Answers

M= 0.20 M
V= 100.0 ml = 0.100 L
n= ??

M = n/v

:. n = MV

n = 0.20M x 0.1000L

:. n = 0.020 mol

Could somebody answer these questions for me? Thanks!

1. What percentage of the earth is covered by water?

2. What sorts of signals does the brain use to communicate sensations, thoughts and actions?

3. Did dinosaurs and humans ever exist at the same time?

4. What is Darwin's theory of the origin of species?

5. Why does a year consist of 365 days and a day of 24 hours?

Answers

Explanation:

1) %70 earth is water and %30 is land.

2)" The single cells in the brain communicatethrough electrical and chemical signals.

3) b'coz earth revolve around the sun in365 days and rotates on its axis in 24 hours. It takes 365 days , because it takes that much time to complete one revolution and it takes 24 hours,because it takes time to complete one rotation as mercury takes 81 earthdays to complete one revolution.

4) Human originated from Adam And Eve.

Several atmospheric gases contribute to global warming: carbon dioxide, methane, and nitrous oxide. Considering this, which choice would do the LEAST to directly reduce atmospheric carbon dioxide.

Answers

Answer:

A

help u and it's A

Explanation:

Please help

What causes a wave to have a higher amplitude?

Answers

Answer:

More energy

Explanation:

Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.

Answer:

energy of the disturbance

Explanation:

........ btw bts paved the way I saw you was army and thought I would say that

Determine whether these statements describe Geiger counters, scintillation counters, both, or neither. An amplifying device that indicates the presence of ionizing particles A device that permits determination of alpha and beta radiation emitted from a substance Film sensitive to radiation that is removed and developed to measure exposure A device used for monitoring individual cumulative exposure to ionizing radiation

Answers

Answer:

An amplifying device that indicates the presence of ionizing particles  

GEIGER COUNTERS

A device that permits determination of alpha and beta radiation emitted from a substance  

BOTH

Film sensitive to radiation that is removed and developed to measure exposure  

NEITHER

A device used for monitoring individual cumulative exposure to ionizing radiation  

NEITHER

Explanation:

1. Geiger counters and scintillation counters can be described by statements 1 and 2.

2. Statement 3 refers to film-based radiation detectors, not Geiger counters or scintillation counters.

3. Statement 4 refers to dosimeters, not Geiger counters or scintillation counters.

1. An amplifying device that indicates the presence of ionizing particles: This statement describes both Geiger counters and scintillation counters. Both types of counters use amplifying devices to detect and indicate the presence of ionizing particles.

2. A device that permits determination of alpha and beta radiation emitted from a substance: This statement describes both Geiger counters and scintillation counters. Both types of counters are capable of detecting alpha and beta radiation.

3. Film sensitive to radiation that is removed and developed to measure exposure: This statement describes neither Geiger counters nor scintillation counters. Instead, it refers to film-based radiation detectors, such as photographic film or thermoluminescent dosimeters (TLDs), which are used to measure radiation exposure.

4. A device used for monitoring individual cumulative exposure to ionizing radiation: This statement describes neither Geiger counters nor scintillation counters.

Know more about ionizing particles:

https://brainly.com/question/12206417

#SPJ2

What conclusion can you draw from the heating curve?

Answers

Answer:A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.

How many copper atoms are in a 70g copper

Answers

Answer:

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Explanation:

The quantity of atoms within the mass of copper is determined by multiplying the quantity of moles by the Avogadro's Number:

[tex]x = \left(\frac{70\,g}{63.546\,\frac{g}{mol}} \right)\cdot \left(6.022\times 10^{23}\,\frac{atoms}{mol} \right)[/tex]

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Answer:

6.64x10^23 atoms.

Explanation:

From Avogadro's hypothesis, 1 mole of any substance contains 6.02x10^23 atoms. This implies that 1 mole of Cu also contains 6.02x10^23 atoms.

1 mole of Cu = 63.5g

If 63.5g of Cu contains 6.02x10^23 atoms,

Then 70g of Cu will contain = (70x6.02x10^23) /63.5 = 6.64x10^23 atoms.

Therefore, there are 6.64x10^23 atoms in 70g oh Cu

does gravity affect the orbit of the international space ​

Answers

Answer:

yes

Explanation:gergrgregbfbwerbebw

what causes different colors to appear in the sky?

Answers

Answer:

Molecules and small particles in the atmosphere change the direction of light rays, causing them to scatter. Scattering affects the color of light coming from the sky.

Explanation:

Ms. Clark is teaching her class about how plants make food for themselves. On the board, she has written this: __________ + air + water = food for plants

Answers

Answer:

sunlight

Explanation:

what is the type of bonding for ammonium lauryl sulfate?

Answers

Answer:

Hydrogen bonding.

Explanation:

Ammonium lauryl sulfate is also known as ammonium dodecyl sulfate there are two parts in Ammonium lauryl sulfate one is nonpolar hydrocarbon and other part polar sulfate group.

Due to polarity of sulfate group its form hydrogen bond very easily.

It is mainly used as foaming agent the main reason of its use is very much soluble in water and making hydrogen bond with water.

A reaction starts with 20.0 grams of lithium hydroxide (LiOH) and produces 31.0 grams of lithium chloride (LiCl), what is the percent yield of lithium chloride (LiCl)? *
LiOH + KCl - LiCl + KOH

A) 64.5%
B) 88.6%
C) 81.5%
D) 92.8%

Answers

Answer:

B) 88.6%

Explanation:

Percent yield equals actual yield divided by theoretical yield

actual yield is 31.0g

theoretical yield is 35g

percent yield was 88.57 which rounds up to 88.6%

The endocrine system sends hormones through the blood to control the activities of tissues and organs.

Group of answer choices

a. True

b. False

Answers

answer:it is false

explanation: as it is true or false I think you don't need explanation

During light-dependent reactions, carbon dioxide is converted to glucose.

Group of answer choices

True

False

Answers

Answer:The light-independent reactions use the ATP and NADPH from the light-dependent reactions to reduce carbon dioxide and convert the energy to the chemical bond energy in carbohydrates such as glucose.

Explanation:step-by-step

Answer:

FALSE

Explanation:

I just took the test and put true and it was wrong so it's false. Hope this helps and please mark brainliest!

ANSWER IT PLEASE!!!!! A virus is a genome, or set of chromosomes, contained inside a protein capsule called a capsid. A virus can be either a single or double strand of RNA or DNA. Although viruses are made of genetic information, they do not have cells. They also need to attach to a host cell in order to live and reproduce. Host cells can be from animals, plants and even bacteria and fungi. Scientists debate whether or not viruses are considered living organisms. Most agree that viruses are not living.


Which of these statements is true based on the information in the passage?

Answers

Answer:

?

Explanation:

What are the statements? You've given the passage but not the statements

Assuming a car (with a 70-L) gas tank can hold approximately 50,000 (5.00 * 10^4) g of octane(C8H18) or 50,000 (5.00 * 10^4) g of ethanol (C2H6O). How much carbon dioxide (CO2), in grams, is produced in one tank of gas from the combustion of each amount?

Answers

Answer:

- From octane: [tex]m_{CO_2}=1.54x10^5gCO_2[/tex]

- From ethanol: [tex]m_{CO_2}=9.57x10^4gCO_2[/tex]

Explanation:

Hello,

At first, for the combustion of octane, the following chemical reaction is carried out:

[tex]C_8H_{18}+\frac{25}{2} O_2\rightarrow 8CO_2+9H_2O[/tex]

Thus, the produced mass of carbon dioxide is:

[tex]m_{CO_2}=5.00x10^4gC_8H_{18}*\frac{1molC_8H_{18}}{114gC_8H_{18}}*\frac{8molCO_2}{1molC_8H_{18}}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=1.54x10^5gCO_2[/tex]

Now, for ethanol:

[tex]C_2H_6O+3O_2\rightarrow 2CO_2+3H_2O[/tex]

[tex]m_{CO_2}=5.00x10^4gC_2H_6O*\frac{1molC_2H_6O}{46gC_2H_6O}*\frac{2molCO_2}{1molC_2H_6O}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=9.57x10^4gCO_2[/tex]

Best regards.

A sample of air has a volume of 140.0 mL at 67C. To w
hat temperature must the gas
be lowered to reduce its volume to 50.0 mL at constant pressure?​

Answers

Answer:

What that means is that when pressure and number of moles are kept constant, increasing the temperature will result in an increase in volume. Likewise, a decrease in temperature will result in a decrease in volume. In your case, the volume of the gas decreased by a factor of about 3, from "140.0 mL" to "50.0 mL".

1. Why is hot air hot?

Answers

Answer:

Explanation:

Radiation from the sun heats the ground, then the ground heats the air by process of conduction. When that happens air temp. and density start to change causing air convection currents. Hope I help.

Gas Laws
Assignment Active
Applying Gas Laws to Aerosol Can D
(国座
Explain why it is not a good idea to throw an
aerosol can into a fire. Which gas law applies?
DONE​

Answers

Answer:

Ideal Gas Law

PV = nRT

Explanation:

Pressure is proportional to temperature;

The heat of the fire would cause increased pressure inside the closed aerosol vessel, eventually resulting in explosion of the vessel, once the temperature rises enough.

En la reacción I2(g) + Br2(g) « 2 IBr(g), Keq = 280 a 150°C. Suponga que se permite que 0.500 mol de IBr en un matraz de 1.00 L alcancen el equilibrio a 150°C. ¿Cuáles son las presiones parciales de equilibrio de IBr, I2 y Br2?

Answers

Answer:

P IBr: 15.454atm

I₂: 0.923 atm

P Br₂: 0.923atm

Explanation:

Basados en la reacción:

I₂(g) + Br₂(g) ⇄ 2 IBr(g)

La constante de equilibrio, Keq, es definida como:

[tex]Keq = \frac{P_{IBr}^2}{P_{I_2}P_{Br_2}}[/tex]

Se cumple la relación de Keq = 280 cuando las presiones están en equilibrio

Usando PV = nRT, la presión inicial de IBr es:

P = nRT / V; 0.500mol*0.082atmL/molK*423.15K / 1.00L = 17.3 atm

Siendo las presiones en equilibrio:

P IBr: 17.3 - 2X

P I₂: X

P Br₂: X

Donde X representa el avance de reacción.

Remplazando en Keq:

280 = (17.3 - 2X)² / X²

280X² = 4X² - 69.2X + 299.29

0 = -276X² - 69.2X + 299.29

Resolviendo para X:

X = -1.174 → Solución falsa. No existen presiones negativas

X = 0.923 → Solución real

Así, las presiones parciales en equilibrio de cada compuesto son:

P IBr: 17.3 - 2X = 15.454atm

P I₂: X = 0.923atm

P Br₂: X = 0.923atm

Answer:

[tex]p_{I_2}=0.926atm\\p_{Br_2}=0.926atm\\p_{IBr}=15.5atm[/tex]

Explanation:

Hello,

In this case, given the initial load of 0.500 mol of IBr in the 1.00-L, we compute its initial concentration:

[tex][IBr]_0=\frac{0.500mol}{1.00L}=0.500M[/tex]

Hence, by knowing the original reaction, we should invert it as IBr will produce iodine and bromine considering the initial load:

[tex]2IBr(g)\rightleftharpoons I_2(g) + Br_2(g)[/tex]

Therefore, the equilibrium constant should be inverted:

[tex]K'=\frac{1}{Keq}=\frac{1}{280}=3.57x10^{-3}[/tex]

So we write the law of mass action:

[tex]K'=\frac{[I_2][Br_2]}{[IBr]^2}[/tex]

That in terms of the change [tex]x[/tex] due to the reaction extent turns out:[tex]3.57x10^{-3}=\frac{(x)(x)}{(0.500-2x)^2}[/tex]

In such a way, solving by using solver or quadratic equation we obtain:

[tex]x_1=-0.0339M\\x_2=0.0267M[/tex]

Clearly, the solution is 0.0267M, thus, the equilibrium concentrations are:

[tex][I_2]=x=0.0267M[/tex]

[tex][Br_2]=x=0.0267M[/tex]

[tex][IBr]=0.5M-2x=0.5M-2*0.0267M=0.447M[/tex]

Thus, with the given temperature (150+273.15=423.15K), we compute the partial pressures by using the ideal gas equation:

[tex]p_{I_2}=[I_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{I_2}=0.926atm\\\\p_{Br_2}=[Br_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{Br_2}=0.926atm\\\\p_{IBr}=[IBr]RT=0.447\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{IBr}=15.5atm[/tex]

Best regards.

What mass of sulfuric acid (H2SO4) is contained in 50.00 mL of a 5.85 M solution? grams

Answers

Answer:

28.69 grams

Explanation:

To find the mass, we first need to find the moles. Once we have the moles, it is easy to use the molar mass of H2SO4 to find its mass.

To find the moles, remember that molarity (M) is equal to the moles divided by the volume (L). The volume HAS TO be converted to liters!

M = moles / V

5.85 M = moles / 0.05 L

moles = 0.2925

Now we know that we have 0.2925 moles of sulfuric acid. The molar mass of sulfuric acid is 98.08 g/mol.

0.2925 moles * (98.08 g / mol) = 28.69 grams

Make sense? If you have any questions, don't hesitate to ask!

what is the molarity of 2.3 mol of Kl dissolved in 0.5 L of water

Answers

Answer:

[tex]4.6\,\,moL\,\,L^{-1}[/tex]

Explanation:

Molarity refers to a measure of concentration.

Molarity = moles of solute/Litres of solution

Molarity refers to number of moles of solute present in this solution.

In order to find a solution's molarity, use value for the number of moles of solute  and the total volume of the solution expressed in liters

As molarity of 2.3 mol of Kl is dissolved in 0.5 L of water,

Molarity = [tex]\frac{2.3}{0.5} =4.6\,\,moL\,\,L^{-1}[/tex]

I’ll give Brainliest to the first answer
The amount of elements on the reactants side of an isolated equation are ___________ the amount of __________ that are formed on the ________ side. *
A)close to, ice crystals, cold
B)less than, properties, chemical
C)equal to, elements, products
D)similar, molecules, present
E)more than, elements, products

Answers

Answer:

C. equal to, elements, products

Explanation:

I took a quiz and it said this was right

The map shows the main streams and the the rivers near City A and City B, as well as the nearby factories and farmland, The arrows in
the diagram show the direction of the water flow. City A gets its water from the sunset River and City B gets its water from the Moth Lake. A liquid herbicide was applied to a farmland. What is the greatest risk of using the herbicide?
Select One:

It will pollute the water source for the city A

It will pollute the air for the City B

It will pollute the water source of city B

It will pollute the air for the city A​

Answers

Answer:

c

Explanation:

the map shows water near the factories go into moth lake so all of the waist will end up there

Calculate the hyrdrogen ion concentration [h+] for the aquesous solution in which [oh-] is 1 x 10-2 mol/l.Is the solution acidic,basic,or neutral? Show your work

Answers

Answer:

- [tex][H^+]=1x10^{-12}[/tex]

- Basic.

Explanation:

Hello,

In this case, given the concentration of hydroxyl ions, one could compute the pOH as shown below:

[tex]pOH=-log([OH^-])=pOH=-log(1x10^{-2})=2[/tex]

Then, since the pOH and the pH are related by:

[tex]pH+pOH=14[/tex]

One computes the pH:

[tex]pH=14-pOH=14-2=12[/tex]

Now, we compute the concentration of hydronium by:

[tex][H^+]=10^{-pH}=10^{-12}[/tex]

[tex][H^+]=1x10^{-12}[/tex]

Finally, since the pH is greater than 7 (neutral point) we conclude that the solution is basic.

Best regards.

Answer:

A. Hydrogen ion concentration, [H+] is 1x10^–12 mol/L

B. Since the pH is 12, the solution is basic.

Explanation:

Data obtained from the question. This includes the following:

Concentration of Hydroxide ion, [OH-] = 1x10^–2 mol/L

Concentration of Hydrogen ion, [H+] =.?

pH =..?

A. Determination of the hydrogen ion concentration, [H+] .

The hydrogen ion concentration, [H+] can be obtained as follow:

[H+] x [OH-] = 1x10^–14

[OH-] = 1x10^–2

[H+] x 1x10^–2 = 1x10^–14

Divide both side by 1x10^–2

[H+] = 1x10^–14 / 1x10^–2

[H+] = 1x10^–12 mol/L

B. Determination of the pH of the solution.

The pH of the solution can be obtained as follow:

pH = –Log [H+]

[H+] = 1x10^–12 mol/L

pH = –Log 1x10^–12

pH = 12.

Then pH of a solution ranges between 0 and 14.

A pH reading between 0 and 6 is termed an acidic solution, a pH reading of 7 is termed a neutral solution and a pH reading between 8 and 14 indicates an alkaline or a basic solution.

The higher the pH value, the more alkaline or basic the solution becomes.

Since the pH is 12, the solution is basic.

Sulfuric acid (H2SO4) has a molar mass of 98.1 g/mol. How many oxygen atoms are found in 75.0 g of H2SO4? A. 1.15 × 10^23 B. 1.84 × 10^24 C. 4.61 × 10^23 D. 7.87 × 10^23

Answers

Answer:

B

Explanation:

first find the no. Of moles of H2SO4

=  75/98.1

= 0.7645

Next step

In on mole of H2SO4 the no.of oxygen atom is 4.

1 H2SO4 : 4 O

0.7645  : x                     x= 0.7645x4= 3.0581

next multiply avogadros constant

3.0581 x 6.022× 10^23 =1.84x10^24

Mass present in 1 gram of mole substance is called molar mass. Molar mass is calculated by: dividing the mass of the compound in grams by the number of moles present in the substances.

The correct answer is:

option B. 1.84 × 10²⁴

Given,

The mass of sulfuric acid =75.0 g

The molar mass of sulfuric acid = 98.1 g/mol

1.The moles of sulfuric acid can be calculated by

M = m ÷ n

where M is molar mass, m is mass and n moles.

moles of sulfuric acid = mass ÷ molar mass

= 75 g ÷ 98.1 g/mol  

=0.7645 moles

Hence moles of sulfuric acid present is 0.7645 moles.

2. 1 mole of sulfuric acid = 4 oxygen atoms.

Then, 0.7645 moles of sulfuric will contain: 0.7645 × 4 = 3.0581 atoms of oxygen

3. Oxygen atoms present in 75.0 g of H₂SO₄ will be calculated by multiplying it with Avogadro's constant:

= 3.0581 x 6.022× 10²³

= 1.84x10²⁴

Therefore, 1.84 × 10²⁴ oxygen atoms will be found in 75.0 g of H₂SO₄.

To learn more about moles follow the given link:

https://brainly.com/question/20486415

Which is the control center for the endrocrine system?

Answers

Answer:

hypothalamus

Explanation:

Other Questions
Which expression can be used to find the surface area of the following rectangular prism?A.15+15+10+10+6+6B.10+6C.10+10+6+6D.15+15+10+10+6 can someone give me some examples of statistics PLEASE A poem with fourteen lines and a mixed rhyme scheme is afoilcoupletstanzasonnet Who was the founding fathers of the Federalist and Anti-Federalist? Are they the same people for both? Mutations are triggered by what do I do if thre are 2 middles in a mean What is the primary role of the United States Bureau of Counterterrorism?to plan counterterrorist attacksto create active counterterrorism groupsto encourage domestic counterterrorism activitiesto advance counterterrorism efforts in other countries Evaluate the extent to which the Portuguese transformed maritime trade in the Indian Ocean in the sixteenth century(3 points/ideas) Question 1Write x2 + 4x 3x3 + 6 in standard form. a) 3x3 + 4x + x2 b) x2 3x3 + 4x + 6 c) 3x3 + x2 + 4x + 6 d) 6 + 4x 3x3 + x2 What is the population density of LA? Explain your work: Los Angeles: population = 4,000,000; Area= 503 sq. miles A movie membership costs $10 a month plus an additional $5 for each movie purchased. If you have only budgeted to spend a maximum of $25 this month, how many movies can you purchase? A sample of diborane gas has a pressure of 345 torr at a temperature of -15c and volume of 3.48L if conditions are changed so that the temperature is 36c and the pressure is 468 torr what will be the volume of the sample Two terms of an arithmetic sequence are a12=70 and a30=124. Write an explicit rule for the nth term. What is the volume of the composite figure? Express the answer in terms of pie.1443 mm31687 mm33127 mm3456 mm3 Directional selection only occurs in response to naturally occurring events.Please select the best answer from the choices providedrueFalse hurry timed testThe influential political text The Social Contract was written by Please help ASAP giving BRAINLIEST , Did I get this correct? For what type of metal is high speed steel drill best suited? 2. Chemical Engineers convert all of the following EXCEPTA. SpaceB. EnergyC. Living CellsD. Microorganisms(1 point)Concepts of Engineering and Technology Final ReviewIf anyone knows all 50 questions could you help me out please! . Why is the carpel considered female and the stamen male?