A 5.0 kg block hangs from a spring with spring constant 2000 N/m. The block is pulled down 5.0 cm from the equilibrium position and given an initial velocity of 1.0 m/s back towards equilibrium. a) What is the total mechanical energy of the motion

Answer:

1.The temperature of each sample will increase by the same amount

Explanation:

This is because, since their specific heat capacities are the same and we have the same mass of each substance, and the same amount of energy due to heat flow is supplied to both the glass and brick at room temperature, their temperatures would thereby increase by the same amount.

This is shown by the calculation below

Q = mcΔT

ΔT = Q/mc where ΔT = temperature change, Q = amount of heat, m = mass of substance and c = specific heat capacity of substance.

Since Q, m and c are the same for both substances, thus ΔT will be the same.

So, the temperature of each sample will increase by the same amount

Answer:

The linear velocity, v = 5.93 m/s

Explanation:

To find the linear velocity after 5 seconds, we find its angular velocity after 5 seconds using

ω' = ω + αt where ω = initial angular speed = 4.00 rev/s = 4.00 × 2π rad/s = 25.13 rad/s, ω' =  = final angular speed, α = angular acceleration = 2.25 rad/s² and t = time = 5.00 s

ω' = ω + αt

= 25.13 rad/s + 2.25 rad/s² × 5.00 s

= 25.13 rad/s + 11.25 rad/s

= 36.38 rad/s

The linear velocity v is gotten from v = rω' where r = radius of pulley = 326 mm/2 = 163 mm = 0.163 m

v = rω'

= 0.163 m × 36.38 rad/s

= 5.93 m/s

So, the linear velocity  v = 5.93 m/s

Answer:

The  value is  [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Explanation:

From the question we are told that

    The pressure is  [tex]P = 1.53 *10^{-7} \ N/m^2[/tex]

    The  temperature is  [tex]T = 26 + 273 = 299 \ K[/tex]

     The volume is  1 cubic cm = [tex]1 * 10^{-6} m^3[/tex]

Generally according to the ideal gas law we have that

      [tex]PV = NkT[/tex]

here  k is the Boltzmann constant with a value  [tex]k = 1.38 *10^{-23} \ J/K[/tex]

  =>  [tex]N = \frac{PV}{ k T}[/tex]

=>     [tex]N = \frac{ 1.53 *10^{-7} * (1* 10^{-6})}{ 1.38*10^{-23} * 299}[/tex]

=>    [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Answer: no u

Explanation: no u

Answer:

a. Moon around Earth.

Explanation:

Charon orbit takes around 6.4 earth days to complete its orbit. Charon does not rises or sets, it hovers over same spot around the Pluto. The same side of Charon faces the Pluto, this is called Tidal Locking.

The moon orbit takes around 27 days to complete its orbit. The moon has different sides that are faced with sun which creates light or dark face of moon on the earth. Moon has 384,400 km distance from the earth.

The object that should exhibit the longest orbital period is option a. Moon around Earth.

Charon's orbit takes around 6.4 earth days to finish its orbit. Charon does not rise or sets, it hovers over similar spot around Pluto. The same side of Charon faces Pluto, this we called Tidal Locking. Here the moon orbit should take approx 27 days to finish its orbit. The moon has various sides that are faced with the sun which developed the light or dark face of the moon on the earth. Also, Moon has 384,400 km distance from the earth.

learn more about orbit here: https://brainly.com/question/25404554

Answer:

Time, [tex]t=1.07\times 10^{-23}\ s[/tex]

Explanation:

Given that,

When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel [tex]3.2\times 10^{-15}\ m[/tex] before interacting.

Let t is the time interval required for the strong interaction to occur. It will move with the speed of light. So,

[tex]t=\dfrac{d}{c}\\\\t=\dfrac{3.2\times 10^{-15}}{3\times 10^8}\\\\t=1.07\times 10^{-23}\ s[/tex]

So, the time interval is [tex]1.07\times 10^{-23}\ s[/tex]

volume of balloon

= 4/3 T R3

= 4/3 x 3.14 x 6.953

= 1405.47 m3

uplift force

= volume of balloon x density of air x 9.8

= = 1405.47 x 1.29 x 9.8

= 1813.05 x 9.8 N

weight of helium gas

= volume of balloon x density of helium x

9.8

= 1405.47 x .179 x 9.8

= 251.58 x 9.8 N

Weight of other mass = 930 x 9.8 N Total weight acting downwards

= 251.58 x 9.8 +930 x 9.8

= 1181.58 x 9.8 N

If W be extra weight the uplift can balance

1181.58 × 9.8 + W × 9.8 = 1813.05 * 9.8

1181.58+W=1813.05

W= 631.47 kg

Answer:

A) the moment of inertia of the system decreases and the angular speed increases.

Explanation:

The complete question is

A merry-go-round spins freely when Diego moves quickly to the center along a radius of the  merry-go-round. As he does this, It is true to say that

A) the moment of inertia of the system decreases and the angular speed increases.

B) the moment of inertia of the system decreases and the angular speed decreases.

C) the moment of inertia of the system decreases and the angular speed remains the same.

D) the moment of inertia of the system increases and the angular speed increases.

E) the moment of inertia of the system increases and the angular speed decreases

In angular momentum conservation, the initial angular momentum of the system is conserved, and is equal to the final angular momentum of the system. The equation of this angular momentum conservation is given as

[tex]I_{1} w_{1} = I_{2} w_{2}[/tex]    ....1

where [tex]I_{1}[/tex] and [tex]I_{2}[/tex] are the initial and final moment of inertia respectively.

and [tex]w_{1}[/tex] and [tex]w_{2}[/tex] are the initial and final angular speed respectively.

Also, we know that the moment of inertia of a rotating body is given as

[tex]I = mr^{2}[/tex]    ....2

where [tex]m[/tex] is the mass of the rotating body,

and [tex]r[/tex] is the radius of the rotating body from its center.

We can see from equation 2 that decreasing the radius of rotation of the body will decrease the moment of inertia of the body.

From equation 1, we see that in order for the angular momentum to be conserved, the decrease from [tex]I_{1}[/tex] to [tex]I_{2}[/tex] will cause the angular speed of the system to increase from [tex]w_{1}[/tex] to [tex]w_{2}[/tex] .

From this we can clearly see that reducing the radius of rotation will decrease the moment of inertia, and increase the angular speed.

Answer:

They both have the same total K.E at the bottom

Explanation:

This Is because If assuming no work is done by non conservative forces, total mechanical energy must be conserved

So

K1 + U1 = K2 + U2

But If both hoops start from rest, and and at the bottom of the incline the level for gravitational potential energy is zero for reference

thus

K1 = 0 , U2 = 0

ΔK = ΔU = m g. h

But if the two inclines have the same height, and both hoops have the same mass m,

So difference in kinetic energy, must be the same for both hoops.

Answer:

The vision becomes blurred due to the refractive defects of the eye. There are mainly three common refractive defects of vision. These are (i) myopia or near-sightedness, (ii) Hypermetropia or far – sightedness, and (iii) Presbyopia. These defects can be corrected by the use of suitable spherical lenses.

Answer:static friction and kinetic friction in a system always act in the same direction as each other and n the opposite direction of the applie force . Is the correct answer

Explanation:

Static friction and kinetic friction in a system always act in the same direction as each other and in the opposite direction of the applied force. The correct option is B.

Friction is the force that prevents one hard material from scooting or rolling over the other.

Frictional forces, such as the locomotion required to walk without dropping, are advantageous, but they also create a significant amount of resistance to motion.

We can control cars because of friction between the tires and the road: more precisely, because there are three types of friction: rolling friction, starting friction, and sliding friction.

Friction reduces the speed of moving objects and can even stop them from moving. The friction between the objects generates heat. As a result, energy is wasted in the machines. Friction will cause wear and tear on the machine parts.

In a system, static and kinetic friction always act in the same direction and in the opposite direction of the applied force.

Thus, the correct option is B.

For more details regarding friction, visit:

https://brainly.com/question/28356847

#SPJ2

Answer:use the formular distance over time i.e distance/time. Make sure to convert the distance from metres to kilometers and time from minutes to hours .

Explanation:

The average speed of the car is 31,680 meters per hour.

To calculate the average speed of the car, you need to divide the total distance traveled by the time it took to travel that distance.

Given:

Time taken (t) = 10 minutes = 10 minutes × (1 hour / 60 minutes) = 10/60 hours = 1/6 hours

Distance traveled (d) = 5,280 meters

Average Speed (v) = Distance (d) / Time (t)

Average Speed (v) = 5280 meters / (1/6) hours

To simplify, when you divide by a fraction, it's equivalent to multiplying by its reciprocal:

Average Speed (v) = 5280 meters × (6/1) hours

Average Speed (v) = 31,680 meters per hour

Hence, the average speed of the car is 31,680 meters per hour.

To know more about average speed here

https://brainly.com/question/17661499

#SPJ2

Answer:

[tex]q = -461532.5 \ C[/tex]

Explanation:

From the question we are told that

     The  electric filed is  [tex]E = 102 \ N/C[/tex]  

Generally according to Gauss law

=>   [tex]E A = \frac{q}{\epsilon_o }[/tex]

Given that  the electric field is pointing downward  , the equation become

    [tex]- E A = \frac{q}{\epsilon_o }[/tex]

Here   [tex]q[/tex] is the excess charge on the surface of the earth

          [tex]A[/tex] is the surface  area of the of the earth which is mathematically represented as

     [tex]A = 4\pi r^2[/tex]

Where r is the radius of the earth which has a value [tex]r = 6.3781*10^6 m[/tex]

 substituting values

    [tex]A = 4 * 3.142 * (6.3781*10^6 \ m)^2[/tex]

    [tex]A =5.1128 *10^{14} \ m^2[/tex]

So

   [tex]q = -E * A * \epsilon _o[/tex]

Here [tex]\epsilon_o[/tex] s the permitivity of free space with value

          [tex]\epsilon_o = 8.85*10^{-12} \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

substituting values

     [tex]q = -102 * 5.1128 *10^{14} * 8.85 *10^{-12}[/tex]

     [tex]q = -461532.5 \ C[/tex]

Answer:

A) 0.0267 T

B) 0.0263 T

Explanation:

Given that

The number of turns, N = 400

Radius of the wire, r = 6 cm = 0.06 m

Current in the wire, I = 0.25 A

Relative permeability, K(m) = 80

See the attached picture for the calculation

Answer:

Hey there!

The correct answer would be option A. If one body is positively charged and another body is negatively charged, free electrons tend to move from the negatively charged body to the positively charged body

Let me know if this helps :)

Answer:

The amplitude [tex]A(5) = 1 \ m[/tex]

Explanation:

From the question we are told that

     The  spring constant is  [tex]k = 100 \ N/m[/tex]

      The  damping constant is  [tex]b = 8.0 *10^{-3} \ kg \cdot m/s[/tex]

       The mass is  [tex]m = 0.050 \ kg[/tex]

       The  maximum displacement is [tex]A_o = 1.5 \ m \ at t = 0[/tex]

       The  time  considered is  t =  5.0 s

Generally the displacement(Amplitude) of damped harmonic motion is mathematically represented as

           [tex]A(t) = A_o * e ^{ - \frac{b * t}{2 * m} }[/tex]

substituting values

         [tex]A(5) = 1.5 * e ^{ - \frac{ 8.0 *10^{-3} * 5}{2 * 0.050} }[/tex]

         [tex]A(5) = 1 \ m[/tex]

Answer:

82.2 mL

Explanation:

The process of adding water to a solution to make it more dilute is known as dilution. The formula for dilution is;

C1V1=C2V2

Where;

C1= concentration of stock solution

V1= volume of stock solution

C2= concentration of dilute solution

V2= volume of dilute solution

V2= C1V1/C2

V2= 1.48 × 55.6/ 1.0

V2= 82.2 mL

.Answer;

Using Fmax=qVB

F=(1.6*10^-19 C)(5.860*10^6 m/s)(1.38 T)

ANS=1.29*10^-12 N

2. Using Amax=Fmax/ m

Amax =(1.29*10^-12 N) / (1.67*10^-27 kg)

ANS=1.93*10^15 m/s^2*

3. No, the acceleration wouldn't be the same. Since The magnitude of the electron is equal to that of the proton, but the direction would be in the opposite direction and also Since an electron has a smaller mass than a proton

Answer:

The blade undergoes 40 revolutions, so neither of the given options is correct!

Explanation:

The revolutions can be found using the following equation:

[tex]\theta_{f} = \theta_{i} + \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]

Where:

α is the angular acceleration

t is the time = 2.5 s

[tex]\omega_{i}[/tex] is the initial angular velocity = 1500 rev/min                

First, we need to find the angular acceleration:

[tex] \alpha = \frac{\omega_{f} - \omega_{i}}{t} = \frac{400 rev/min*2\pi rad*1 min/60 s - 1500 rev/min *2\pi rad*1 min/60 s}{2.5 s} = -46.08 rad/s^{2} [/tex]

Now, the revolutions that the blade undergo are:

[tex]\theta_{f} - \theta_{i} = \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]

[tex]\Delta \theta = 1500 rev/min *2\pi rad*1 min/60 s*2.5 s - \frac{1}{2}*(46.08 rad/s^{2})*(2.5)^{2} = 248.7 rad = 39.9 rev[/tex]        

Therefore, the blade undergoes 40 revolutions, so neither of the given options is correct!

I hope it helps you!                              

Answer:

0.09 x10^-10m

Explanation:

Using wavelength=( 12.27 A)/√V

= 12.27 x 10^-10/ √1.6x10^2

= 0.09x10^-10m

Answer:

The distance is [tex]d = 193.6 \ m[/tex]

Explanation:

From the question we are told that

   The time interval between the sounds is  k[tex]t_1 = k + t_2[/tex] =  0.50 s

    The  speed of sound in air is  [tex]v_s = 343 \ m/s[/tex]

    The  speed of sound in the concrete is [tex]v_c = 3000 \ m/s[/tex]

Generally the distance where the collision occurred is  mathematically represented as

          [tex]d = v * t[/tex]

Now from the question we see that d is the same for both sound waves

 So

        [tex]v_c t = v_s * t_1[/tex]

Now  

So [tex]t_1 = k + t[/tex]

      [tex]v_c t = v_s * (t+ k)[/tex]

=>     [tex]3000 t = 343* (t+ 0.50)[/tex]

=>    [tex]3000 t = 343* (t+ 0.50)[/tex]

=>    [tex]t = 0.0645 \ s[/tex]

So

     [tex]d = 3000 * 0.0645[/tex]

     [tex]d = 193.6 \ m[/tex]

Answer:

In an electromagnetic wave in free space, the ratio of the magnitudes of electric and magnetic field vectors E and B is equal:  speed of light(c)

Explanation:

Generally the ratio of the E(electric field ) and  the B(magnetic field ) is  equal to the speed of the electromagnetic wave i.e the speed of  light (c) the value is

    [tex]c = 3.0 *10^{8} \ m/s[/tex]

Answer:

Pressure, P = 1250 Pa

Explanation:

Given that,

Weight of a brick, F = 50 N

Dimension of the brick is 30.0 cm × 10.0 cm × 4.00 cm

We need to find the maximum pressure it can exert on a horizontal surface due to its weight. Pressure is equal to the force acting per unit area. Pressure exerted is inversely proportional to the area of cross section. So, we need to minimize area. Taking to smaller dimensions.

A = 40 cm × 10 cm = 400 cm² = 0.04 m²

So,

Pressure,

[tex]P=\dfrac{50\ N}{0.04\ m^2}\\\\P=1250\ Pa[/tex]

So, the maximum pressure of 1250 Pa it can exert on a horizontal surface.

The maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure. It is denoted by P.

The given data in the problem is;

W is the weight of a brick = 50 N

The dimension of the brick = 30.0 cm × 10.0 cm × 4.00 cm

A is the area,

The area is found as;

A=40 cm × 10 cm = 400 cm² = 0.04 m²

The pressure is the ratio of the force and area

[tex]\rm P = \frac{F}{A} \\\\ \rm P = \frac{50}{0.04} \\\\ \rm P =1250 \ Pascal[/tex]

Hence the maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

Answer:

352 seconds are needed for the radioisotope to decay to one-sixteenth of its original mass.

Explanation:

The decay of radioisotopes are represented by the following ordinary differential equation:

[tex]\frac{dm}{dt} = -\frac{t}{\tau}[/tex]

Where:

[tex]t[/tex] - Time, measured in seconds.

[tex]\tau[/tex] - Time constant, measured in seconds.

[tex]m[/tex] - Mass of the radioisotope, measured in grams.

The solution of this expression is:

[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex]

Where [tex]m_{o}[/tex] is the initial mass of the radioisotope, measured in kilograms.

The ratio of current mass to initial mass is:

[tex]\frac{m(t)}{m_{o}} = e^{-\frac{t}{\tau} }[/tex]

The time constant is now calculated in terms of half-life:

[tex]\tau = \frac{t_{1/2}}{\ln2}[/tex]

Where [tex]t_{1/2}[/tex] is the half-life of the radioisotope, measured in seconds.

Given that [tex]t_{1/2} = 88\,s[/tex], the time constant of the radioisotope is:

[tex]\tau = \frac{88\,s}{\ln 2}[/tex]

[tex]\tau \approx 126.957\,s[/tex]

Now, if [tex]\frac{m(t)}{m_{o}(t)} = \frac{1}{16}[/tex] and [tex]\tau \approx 126.957\,s[/tex], the time is:

[tex]t = -\tau \cdot \ln\frac{m(t)}{m_{o}}[/tex]

[tex]t = -(126.957\,s)\cdot \ln \frac{1}{16}[/tex]

[tex]t \approx 352\,s[/tex]

352 seconds are needed for the radioisotope to decay to one-sixteenth of its original mass.

Answer:

The speed of the proton is 4059.39 m/s

Explanation:

The centripetal force on the particle is given by;

[tex]F = \frac{mv^2}{r}[/tex]

The magnetic force on the particle is given by;

[tex]F = qvB[/tex]

The centripetal force on the particle must equal the magnetic force on the particle, for the particle to remain in the circular path.

[tex]\frac{mv^2}{r} = qvB\\\\r = \frac{mv^2}{qvB} \\\\r = \frac{mv}{qB}[/tex]

where;

r is the radius of the circular path moved by both electron and proton;

⇒For electron;

[tex]r = \frac{(9.1*10^{-31})(7.45*10^6)}{(1.602*10^{-19})(1.1*10^{-5})}\\\\r = 3.847 \ m[/tex]

⇒For proton

The speed of the proton is given by;

[tex]r = \frac{mv}{qB}\\\\mv = qBr\\\\v = \frac{qBr}{m} \\\\v = \frac{(1.602*10^{-19})(1.1*10^{-5})(3.847)}{1.67*10^{-27}} \\\\v = 4059.39 \ m/s[/tex]

Therefore, the speed of the proton is 4059.39 m/s

Answer:

The final temperature is 61.65 °C

Explanation:

mass of copper pot [tex]m_{c}[/tex] = 2 kg

temperature of copper pot [tex]T_{c}[/tex] = 20 °C  (the pot will be in thermal equilibrium with the room)

specific heat capacity of copper [tex]C_{c}[/tex]= 385 J/kg-°C

The heat content of the copper pot = [tex]m_{c}[/tex][tex]C_{c}[/tex][tex]T_{c}[/tex] = 2 x 385 x 20 = 15400 J

mass of boiling water [tex]m_{w}[/tex] = 200 g = 0.2 kg

temperature of boiling water [tex]T_{w}[/tex] = 100 °C

specific heat capacity of water [tex]C_{w}[/tex] = 4182 J/kg-°C

The heat content of the water = [tex]m_{w}[/tex][tex]C_{w}[/tex][tex]T_{w}[/tex] = 0.2 x 4182 x 100 = 83640 J

The total heat content of the water and copper mix [tex]H_{T}[/tex] = 15400 + 83640 = 99040 J

This same heat is evenly distributed between the water and copper mass to achieve thermal equilibrium, therefore we use the equation

[tex]H_{T}[/tex] =   [tex]m_{c}[/tex][tex]C_{c}[/tex][tex]T_{f}[/tex] + [tex]m_{w}[/tex][tex]C_{w}[/tex]

where [tex]T_{f}[/tex] is the final temperature of the water and the copper

substituting values, we have

99040 = (2 x 385 x [tex]T_{f}[/tex]) + (0.2 x 4182 x

99040 = 770[tex]T_{f}[/tex] + 836.4

99040 = 1606.4[tex]T_{f}[/tex]

[tex]T_{f}[/tex] = 99040/1606.4 = 61.65 °C

Answer:

The direction of the force is towards the East.

Explanation:

Using the right hand rule, the force on the current carrying conductor is east.

In the right hand rule, if the hand is held with the fingers pointed parallel to the palm representing the magnetic field, and the thumb held at right angle to the rest of the fingers representing the direction of the current, then the palm will push in the direction of the force.

In this case, the thumb is pointing downwards, with the fingers pointing north away from the body in the direction of the earth's magnetic field, the palm will push east.

Answer:

The  period is [tex]T = 0.00255 \ s[/tex]

Explanation:

From the question we are told that

  The  frequency is  [tex]f = 392 \ Hz[/tex]

Generally the period is mathematically represented as  

           [tex]T = \frac{1}{f}[/tex]

=>       [tex]T = \frac{1}{ 392}[/tex]

=>       [tex]T = 0.00255 \ s[/tex]

Answer:

covalent

Explanation:

covalent bonds share electrons