A 5.0-m-wide swimming pool is filled to the top. The bottom of the pool becomes completely shaded in the afternoon when the sun is 23Â degrees above the horizon. How deep is the pool? (in meters)

The time constant (in ms) of the RC circuit is 3.75 ms. Hence, the correct option is  (d) 3.75 ms.

The rate of decay of the current in a charging capacitor is proportional to the current in the circuit at that time. Therefore, it takes longer for a larger current to decay than for a smaller current to decay in a charging capacitor.A capacitor is discharged through a 20.0 Ω resistor.

The discharge current decreases to 22.0% of its initial value in 1.50 ms. We can obtain the time constant of the RC circuit using the following formula:$$I=I_{o} e^{-t / \tau}$$Where, I = instantaneous current Io = initial current t = time constant R = resistance of the circuit C = capacitance of the circuit

To know more about circuit visit:-

https://brainly.com/question/12608516

#SPJ11

The time constant of the RC circuit is approximately 0.674 m s.

To determine the time constant (τ) of an RC circuit, we can use the formula:

τ = RC

Given that the discharge current decreases to 22.0% of its initial value in 1.50 m s, we can calculate the time constant as follows:

The percentage of the initial current remaining after time t is given by the equation:

I(t) =[tex]I_oe^{(-t/\tau)[/tex]

Where:

I(t) = current at time t

I₀ = initial current

e = Euler's number (approximately 2.71828)

t = time

τ = time constant

We are given that the discharge current decreases to 22.0% of its initial value. Therefore, we can set up the following equation:

0.22 =[tex]e^{(-1.50/\tau)[/tex]

To solve for τ, we can take the natural logarithm (ln) of both sides:

ln(0.22) = [tex]\frac{-1.50}{\tau}[/tex]

Rearranging the equation to solve for τ:

τ = [tex]\frac{-1.50 }{ ln(0.22)}[/tex]

Calculating this expression:

τ ≈ 0.674 m s

Learn more about time constant here:

brainly.com/question/32577767

#SPJ11

A 20.0 kg cannonball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0°. Using conservation of energy, the maximum height reached by the cannonball is approximately 510.2 meters.

A cannon ball weighing 20.0 kg is launched from a cannon with an initial velocity of 100 m/s at an angle of 20.0° above the horizontal.

To determine the maximum height reached by the cannonball using the conservation of energy principle, we consider the conversion of kinetic energy into gravitational potential energy.

Initially, the cannonball has only kinetic energy, given by the equation KE = (1/2)mv², where m is the mass and v is the velocity.

At the highest point of its trajectory, the cannonball has no vertical velocity, meaning it has no kinetic energy but possesses gravitational potential energy, given by the equation PE = mgh, where h is the height and g is the acceleration due to gravity (approximately 9.8 m/s²).

Using the conservation of energy, we equate the initial kinetic energy to the maximum potential energy:

(1/2)mv² = mgh

Canceling the mass and rearranging the equation, we find:

v²/2g = h

Plugging in the given values, we have:

(100²)/(2*9.8) = h

Simplifying the equation, we find:

h ≈ 510.2 m

Therefore, the maximum height reached by the cannonball is approximately 510.2 meters.

To know more about maximum height refer here:

https://brainly.com/question/30878848#

#SPJ11

The amount of radiation emitted by a blackbody with a temperature of 353 K is 961 {W/m}².

The formula for calculating the amount of radiation emitted by a blackbody is given by the Stefan-Boltzmann law: j^* = \sigma T^4 Where j* is the radiation energy density (in watts per square meter), σ is the Stefan-Boltzmann constant (σ = 5.67 x 10^-8 W/m^2K^4), and T is the absolute temperature in Kelvin (K).Using the given temperature of T = 353 K and the formula above, we can calculate the amount of radiation emitted by the blackbody: j^* = \sigma T^4 j^* = (5.67 \times 10^{-8}) (353)^4 j^* = 961.2 {W/m}².

Therefore, the amount of radiation emitted by the blackbody with a temperature of 353 K is approximately 961 watts per square meter (W/m²).Rounding this to the nearest whole number as specified in the question gives us the final answer of: 961 (no decimals).

More on radiation: https://brainly.com/question/31106159

#SPJ11

Cyclopentanone, C5H8O is a cyclic ketone and can be converted to various organic compounds with the help of different reagents. Thus, cyclopentanone can be used as a starting material to synthesize different organic compounds using various reagents and catalysts.

Here, efficient syntheses for three organic compounds using cyclopentanone as a starting material are given below:

1) 2-Methylcyclopentanone: It can be prepared by the reaction of cyclopentanone with isopropyl, magnesium bromide, followed by hydrolysis of the resulting product. This reaction is shown below:

2) Cyclopentylmethanol: It can be prepared by the reduction of cyclopentanone with sodium borohydride (NaBH4) in methanol. This reaction is shown below:

3) 2-Cyclopenten-1-one: It can be prepared by the dehydration of cyclopentanol, which can be prepared by the reduction of cyclopentanone with lithium aluminum hydride (LiAlH4). The dehydration of cyclopentanol can be carried out by the elimination of water molecule using an acid catalyst like H2SO4. The overall reaction is shown below.

to know more about cyclopentanone visit:

https://brainly.com/question/14919939

#SPJ11

The linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.

Linear speed is the rate at which an object moves along a circular path. It is measured in distance per unit time, such as miles per hour (mph) or meters per second (m/s).

The formula for linear speed is:

v = rω where:

v = linear speed

r = radius of the circle

rω = angular speed (measured in radians per second)

To calculate the linear speed of a point on a DVD spinning at 100 mph and with a radius of 14 inches, we need to convert the units of the given speed from mph to inches per second:

100 mph = (100 x 5280 feet) / 3600 seconds = 146.67 feet/second

146.67 feet/second = 1760 inches/second

Next, we need to find the angular speed ω of the DVD.

Angular speed is the rate at which an object rotates about an axis, and it is measured in radians per second. The formula for angular speed is:

ω = 2πf where:

ω = angular speed

f = frequency (measured in hertz)

π = 3.14159...

The frequency f of the DVD is equal to its rotational speed divided by the number of revolutions per second. One revolution is a complete turn around the circle, or 2π radians. Therefore, the frequency is:

f = (100 mph) / (2π x 14 inches x 3600 seconds/5280 feet) = 0.862 hertz

Finally, we can substitute the given values into the formula for linear speed:

v = rωv = (14 + 3) inches x 2π x 0.862 hertz = 219.91 inches/second

Therefore, the linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.

Learn more about Linear speed https://brainly.com/question/29345009

#SPJ11

Relativistic thought refers to the recognition that our perceptions and beliefs are influenced by our experiences, upbringing, and cultural and social environments, according to Perry.

It suggests that reality is subjectively constructed rather than objectively discovered, and that what is "true" or "right" for one person or group may not be for another. Relativistic thinking entails a degree of tolerance for opposing viewpoints and a willingness to engage in dialogue rather than debate or dismiss opposing perspectives. Instead of seeing things in black and white, relativistic thought acknowledges the nuances and complexity of human experience and acknowledges that there may be multiple valid perspectives on any given issue.

To know more about degree of tolerance, visit:

https://brainly.com/question/32378860

#SPJ11

The electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.

Let's first calculate the electric field at point P due to the first charge:q1 = -5.5 nC, r1 = (-3.1, -3, 0) m and r = (1, 0, 0) m

The distance between charge 1 and point P is:r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)r = √((1 - (-3.1))² + (0 - (-3))² + (0 - 0)²)r = √(4.1² + 3² + 0²)r = 5.068 m

Therefore, the electric field at point P due to charge 1 is:

E1 = kq1 / r1²E1 = (9 x 10^9 Nm²/C²) x (-5.5 x 10^-9 C) / (5.068 m)²E1 = -4.3 x 10^5 N/C (towards left, as the charge is negative)

Now, let's calculate the electric field at point P due to the second charge:

q2 = 9.3 nC, r2 = (-2, 3, -2) m and r = (1, 0, 0) m

The distance between charge 2 and point P is:

r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)

r = √((1 - (-2))² + (0 - 3)² + (0 - (-2))²)

r = √(3² + 3² + 2²)r = √22 m

Therefore, the electric field at point P due to charge 2 is:

E2 = kq2 / r2²

E2 = (9 x 10^9 Nm²/C²) x (9.3 x 10^-9 C) / (√22 m)²

E2 = 3.1 x 10^5 N/C (towards right, as the charge is positive)

Now, the total electric field at point P due to both charges is:

E = E1 + E2

E = -4.3 x 10^5 N/C + 3.1 x 10^5 N/C

E = -1.2 x 10^5 N/C

Therefore, the electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.

Learn more about electric field at:

https://brainly.com/question/15906502

#SPJ11

The electric field at point P (1, 0, 0)m is (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C.

The given charges are -5.5 nC and 9.3 nC. The position vectors of these charges are (-3.1, -3, 0)m and (-2, 3, -2)m. We need to find the electric field at (1, 0, 0)m.

Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC

Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m

Using the formula of electric field, the electric field due to q1 at point P will be given by:

E1 = kq1 / r²

where k is the Coulomb constantk = 9 × 10⁹ N m² C⁻²

Electric field due to q1 at point P isE1 = 9 × 10⁹ × (-5.5) / (4.1² + 3²) = -2.42 × 10⁶ N/C

Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC

Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m

Electric field due to q2 at point P will be given by:

E2 = kq2 / r²

Electric field due to q2 at point P is

E2 = 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) = 6.91 × 10⁶ N/C

Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially.

The vector addition of electric fields E1 and E2 is given by the formula:

E = E1 + E2

Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC

Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m

Using the formula of electric field, the electric field due to q1 at point P will be given by:E1 = kq1 / r²

where k is the Coulomb constant

k = 9 × 10⁹ N m² C⁻²

The magnitude of the electric field due to q1 at point P is given by|E1| = 9 × 10⁹ × |q1| / r²= 9 × 10⁹ × 5.5 / (4.1² + 3²) N/C= 2.42 × 10⁶ N/C

The direction of the electric field due to q1 at point P is towards the charge q1.

Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC

Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m

The magnitude of the electric field due to q2 at point P will be given by:

E2 = kq2 / r²= 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) N/C= 6.91 × 10⁶ N/C

The direction of the electric field due to q2 at point P is away from the charge q2.

Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially. The vector addition of electric fields E1 and E2 is given by the formula:E = E1 + E2E = (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C

Learn more about electric field: https://brainly.com/question/30544719

#SPJ11

Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.

Given data:

Initial pressure P1 = 70 kPa

Initial temperature T1 = 100°C

Final pressure P2 = 4 MPa

Adiabatic or isentropic process, so heat transferred is zero, Q = 0

We need to determine the final temperature T2 and the work required for the compression process, W.

Adiabatic process is a process where there is no heat transfer, Q = 0. The energy balance equation for a closed system undergoing adiabatic or isentropic process can be written as:

dE = dQ - dW

Here, dE = Change in internal energy

dQ = Heat transferred (for adiabatic process, dQ = 0)

dW = Work done by the system

We can write the above equation in terms of specific quantities as: de = dq - dw

where, e = Internal energy per unit mass

q = Heat transferred per unit mass (for adiabatic process, q = 0)w = Work done per unit mass

We can use the entropy formula to determine the final temperature T2.S = constant

We can use the following equation for an adiabatic process:

S1 = S2

where S1 is the entropy of the water at P1 and T1 and S2 is the entropy of the water at P2 and T2.

S2 = S1 = constant

The entropy of the water can be calculated using the following equation:

s = Cp ln(T) - R ln(P)

where, s is the entropy per unit mass, Cp is the specific heat capacity at constant pressure, R is the gas constant, P is the pressure, and T is the temperature.

In our case, since the process is isentropic or adiabatic, the entropy change is zero.

Therefore, we can write:

S2 - S1 = 0Cp ln(T2) - R ln(P2) - Cp ln(T1) + R ln(P1) = 0Cp ln(T2/T1) - R ln(P2/P1) = 0Cp ln(T2/T1) = R ln(P1/P2)T2/T1 = (P1/P2)^(R/Cp)T2 = T1 * (P1/P2)^(R/Cp)

The specific heat capacity at constant pressure for water vapor can be taken as Cp = 1.872 kJ/kg K and the gas constant for water vapor is R = 0.4615 kJ/kg K.

The work done for an adiabatic process can be calculated using the following equation:

W = Cp * (T1 - T2)/(γ - 1)

where γ = Cp/Cv is the ratio of specific heats.

Cv for water vapor can be taken as 1.4 kJ/kg K.The specific work done per unit mass for the compression process can be calculated as:

W/m = W/m = Cp * (T1 - T2)/(γ - 1)We can substitute the given values in the above equations to obtain:

T2 = T1 * (P1/P2)^(R/Cp)T2 = 100 + 273.15 * (70 / 4000)^(0.4615/1.872) = 937.15

K = 664°CW/m = Cp * (T1 - T2)/(γ - 1)W/m = 1.872 * (100 + 273.15 - 937.15)/(1.4 - 1) = -887.1 kJ/kg

Work required for the compression process is 887.1 kJ/kg.

Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.

To know more about work, visit:

https://brainly.com/question/18094932

#SPJ11

A 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s will give Hall voltage of 2.3712 mV.

For calculating this, we know that:

VH = B * d * v * RH

In this instance, the blood flow rate is given as 59.0 cm/s, the magnetic field strength is given as 0.160 T, the aorta diameter is given as 2.60 cm (which we will convert to metres, thus d = 0.026 m), and the magnetic field strength is given as 0.160 T.

Let's assume a value of RH = [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = (0.160 T) * (0.026 m) * (0.59 m/s) *  [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = 0.0023712 V

Or,

VH = 2.3712 mV

Thus, the Hall voltage produced in the aorta is approximately 2.3712 mV.

For more details regarding Hall voltage, visit:

https://brainly.com/question/32048582

#SPJ4

The maximum speed of the object is Umas =  1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x =  6.97 cm..

To find the maximum speed of the object, we can use the concept of mechanical energy conservation. At the maximum speed, all the potential energy stored in the spring is converted into kinetic energy.

The potential energy stored in the spring is given by:

Potential energy (PE) = (1/2)kx²

Where:

k = force constant of the spring = 95.0 N/m

x = displacement of the object from equilibrium = 7.00 cm = 0.0700 m (converted to meters)

Substituting the values into the equation:

PE = (1/2)(95.0 N/m)(0.0700 m)²

PE ≈ 0.230 Joules

At the maximum speed, all the potential energy is converted into kinetic energy:

Kinetic energy (KE) = 0.230 Joules

The kinetic energy is given by:

KE = (1/2)mv²

Where:

m = mass of the object = 0.200 kg

v = maximum speed of the object (Umas)

Substituting the values into the equation:

0.230 Joules = (1/2)(0.200 kg)v²

v² = (0.230 Joules) * (2/0.200 kg)

v² = 2.30 Joules/kg

v ≈ 1.516 m/s

Therefore, the maximum speed of the object is Umas ≈ 1.516 m/s.

To find the location of the object relative to equilibrium when it has one-third of the maximum speed, we can use the concept of energy conservation again. At this point, the kinetic energy is one-third of the maximum kinetic energy.

KE = (1/2)mv²

(1/3)KE = (1/6)mv²

Substituting the values into the equation:

(1/3)(0.230 Joules) = (1/6)(0.200 kg)v²

0.077 Joules = (0.0333 kg)v²

v² = 2.311 Joules/kg

v ≈ 1.519 m/s

Now, we need to find the displacement x of the object from equilibrium at this velocity. We can use the formula for the potential energy stored in the spring:

PE = (1/2)kx²

Rearranging the equation:

x² = (2PE) / k

x² = (2 * 0.230 Joules) / 95.0 N/m

x² ≈ 0.004842 m²

x ≈ ±0.0697 m

Since the object is moving to the right, the displacement x will be positive:

x ≈ 0.0697 m

Converting this to centimeters:

x ≈ 6.97 cm

Therefore, the location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

The maximum speed of the object is Umas ≈ 1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

To know more about speed, visit:

https://brainly.com/question/30249508

#SPJ11

The

magnitude

of the truck's velocity

is approximately 22.783 m/s.

To solve this problem, we can break down the velocities into their x and y components.

The

car's velocity

is directed due north, so its

x-component is 0 m/s and its y-component is 17.3 m/s.

The truck's velocity is directed 52.0° north of east. To find its x and y components, we can use trigonometry. Let's define the

angle

measured counterclockwise from the positive x-axis.

The x-component of the truck's velocity can be found using the cosine function:

cos(52.0°) = adjacent / hypotenuse

cos(52.0°) = x-component / 23.0 m/s

Solving for the x-component:

x-component = 23.0 m/s * cos(52.0°)

x-component ≈ 14.832 m/s

The y-component of the truck's velocity can be found using the sine function:

sin(52.0°) = opposite / hypotenuse

sin(52.0°) = y-component / 23.0 m/s

Solving for the y-component:

y-component = 23.0 m/s * sin(52.0°)

y-component ≈ 17.284 m/s

Now, we can find the magnitude of the truck's velocity by using the

Pythagorean theorem

:

magnitude = √(x-component² + y-component²)

magnitude = √((14.832 m/s)² + (17.284 m/s)²)

magnitude ≈ √(220.01 + 298.436)

magnitude ≈ √518.446

magnitude ≈ 22.783 m/s

Therefore, the magnitude of the truck's

velocity

is approximately 22.783 m/s.

To know more about

magnitude

visit:

https://brainly.com/question/30337362

#SPJ11

The child's angular displacement during a 1.0 s time interval is approximately 1.432 radians.

To determine the angular displacement of the child on the merry-go-round during a 1.0 s time interval, we can use the formula:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

The angular velocity (ω) can be calculated by dividing the total angular displacement by the total time taken to complete one revolution.

In this case:

Time taken to go around once (T) = 4.4 s

Angular Velocity (ω) = 2π / T

Angular Velocity (ω) = 2π / 4.4 s ≈ 1.432 radians/s

Now, we can calculate the angular displacement during a 1.0 s time interval:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

Angular Displacement (θ) = 1.432 radians/s × 1.0 s

Angular Displacement (θ) ≈ 1.432 radians

Learn more about angular displacement here:

https://brainly.com/question/31387317

#SPJ11

The angular displacement of the child during a 1.0 s time interval is 1.44 radian. The given values are, Time taken by the child to go around once, t = 4.4 s Time interval, t₁ = 1 s

Formula used: Angular displacement (θ) = (2π/t) × t₁. Substitute the given values in the formula, Angular displacement (θ) = (2π/t) × t₁= (2π/4.4) × 1= 1.44 radian. Thus, the angular displacement of the child during a 1.0 s time interval is 1.44 radian.

The change in the angular position of an object or a point in a rotational system is known as angular displacement and it measures the amount and direction of rotation from an initial position to a final position. Angular displacement is an important concept in physics and engineering, as it helps to describe a rotational motion.

To know more about angular displacement, refer

https://brainly.com/question/31150979

#SPJ11

The masses of the objects have to be very small to be able to get the objects very close to each other because of the gravitational force.

Gravitational force is the force of attraction between any two objects with mass. It is an attractive force that acts between all objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart.

Gravitational force is one of the fundamental forces in nature. It is an attractive force that acts between any two objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart. In general, the strength of the gravitational force between two objects is given by the formula F = Gm1m2/r^2, where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them. As you can see from this formula, the strength of the gravitational force decreases as the distance between the objects increases.

To know more about gravitational force visit :-

https://brainly.com/question/32609171

#SPJ11

It has been determined that the focal length of the lens is -0.6667 m.

Given: The refractive power of a lens is -1.50We are supposed to find the focal length of the given lens

Solution:The formula to find the focal length of a lens is given by:1/f = (n-1) (1/R1 - 1/R2)

Given: Refractive power (P) = -1.50

As we know that, P = 1/f (Where f is the focal length)

Hence, -1.50 = 1/fOr, f = -1/1.5= -0.6667 m

Therefore, the focal length of the given lens is -0.6667 m.

From the above calculations, it has been determined that the focal length of the lens is -0.6667 m.

To know more about focal length visit:

brainly.com/question/31755962

#SPJ11

The displacement of a wave traveling in the negative y-direction depends on the amplitude and frequency of the wave.

The displacement of a wave traveling in the negative y-direction is a combination of factors. The first factor is the amplitude, which is the maximum distance that a particle moves from its rest position as a wave passes through it. The second factor is the frequency, which is the number of waves that pass a fixed point in a given amount of time. The displacement of a wave is given by the formula y = A sin(kx - ωt + ϕ), where A is the amplitude, k is the wave number, x is the position, ω is the angular frequency, t is the time, and ϕ is the phase constant. This formula shows that the displacement depends on the amplitude and frequency of the wave.

These variables have the same fundamental meaning for waves. In any case, it is useful to word the definitions in a more unambiguous manner that applies straightforwardly to waves: Amplitude is the distance between the wave's maximum displacement and its resting position. Frequency is the number of waves that pass by a particular point every second.

Know more about amplitude and frequency, here:

https://brainly.com/question/31863582

#SPJ11