Answer:
the answer to the question is known as D
You walk into a room and you see 4 chickens on a bed 2 cows on the floor and 2 cats in a chair. How many legs are on the ground? (I know this answer just a riddle to see who knows it) (:
Answer:
18
Explanation:
I'm pretty sure I got it right
Two pistons are connected to a fluid-filled reservoir. The first piston has an area of 3.002 cm2, and the second has an area of 315 cm2. If the first cylinder is pressed inward with a force of 50.0 N, what is the force that the fluid in the reservoir exerts on the second cylinder?
Answer:
The force on the second piston is 5246.5 N .
Explanation:
Area of first piston, a = 3.002 cm^2
Area of second piston, A = 315 cm^2
Force on first piston, f = 50 N
let the force of the second piston is F.
According to the Pascal's law
[tex]\frac{f}{a} = \frac{F}{A}\\\\\frac{50}{3.002}=\frac{F}{315}\\\\F = 5246.5 N[/tex]
A light source radiates 60.0 W of single-wavelength sinusoidal light uniformly in all directions. What is the average intensity of the light from this bulb at a distance of 0.400 m from the bulb
Answer: [tex]29.85\ W/m^2[/tex]
Explanation:
Given
Power [tex]P=60\ W[/tex]
Distance from the light source [tex]r=0.4\ m[/tex]
Intensity is given by
[tex]I=\dfrac{P}{4\pi r^2}[/tex]
Inserting values
[tex]\Rightarrow I=\dfrac{60}{4\pi (0.4)^2}\\\\\Rightarrow I=\dfrac{60}{2.010}\\\\\Rightarrow I=29.85\ W/m^2[/tex]
Answer:
29.85 W/ m^2
Explanation:
Where would the normal force exerted on the rover when it rests on the surface of the planet be greater
Answer:
Normal force exerted on the rover would be greater at a point on the surface of the planet where the weight of the rover is experienced to be greater.
Explanation:
Since weight is a vector quantity, it can vary with position. Weight is the amount of force the planet exerts on the rover centered towards the planet.
Such a force is the result of gravitational pull and is quantified as:
[tex]F=G\times \frac{M.m}{R^2}[/tex]
and [tex]M=\rho\times \frac{4\pi.r^3}{3}[/tex]
where:
R = distance between the center of mass of the two bodies (here planet & rover)
G = universal gravitational constant
M = mass of the planet
m = mass of the rover
This gravitational pull varies from place to place on the planet because the planet may not be perfectly spherical so the distance R varies from place to place and also the density of the planet may not be uniform hence there is variation in weight.
Weight is basically a force that a mass on the surface of the planet experiences.
According to Newton's third law the there is an equal and opposite reaction force on the body (here rover) which is the normal force.
A cylindrical container with a cross sectional area of 65.2 cm^2 holds a fluid of density 806 kg/m^3. At the bottom of the container the pressure is 116 kPa.
(a) What is the depth of the fluid?
(b) Find the pressure at the bottom of the container after an additional 2.05 X 10^-3 m^3 of this fluid is added to the container. Assume that no fluid spills out of the container.
3. You have a variable-voltage power supply and a capacitor in the form of two metal disks of radius 0.6 m, held a distance of 1 mm apart. What is the largest voltage you can apply to the capacitor without the air becoming highly conductive
Answer:
The breakdown of air occurs at a maximum voltage of 3kV/mm.
Explanation:
The breakdown of air occurs at a maximum voltage of 3kV/mm.
At this level of voltage the air between the plates become highly ionised and breakdown occurs. Since, the distance held between the plates is 1mm , it can withstand a maximum voltage of 3 kV.
After this voltage the air will become conductive in nature and will form ions in the air between the plates and ultimately breakdown will take place with a flash.
boat carrying people more than its capacity is attributes of sinking why
Answer:
Upthrust on boat becomes lesser than Weight of boat
Explanation:
When there are more people than the capacity, The weight of the boat acting downwards increases. However, the upthrust acting on the submerged part of the boat is constant. Since Weight > Upthrust, there is a net force downwards, leading to sinking.
A 6.0-cm-diameter horizontal pipe gradually narrows to 4.0 cm. When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 32.0 kPa and 24.0 kPa, respectively. What is the volume rate of flow?
Answer:
a n c
Explanation:
A football quarterback runs 15.0 m straight down the playing field in 3.00 s. He is then hit and pushed 3.00 m straight backward in 1.71 s. He breaks the tackle and runs straight forward another 24.0 m in 5.20 s. Calculate his average velocity (in m/s) for the entire motion. (Assume the quarterback's initial direction is positive. Indicate the direction with the sign of your answer.)
Answer:
Average Velocity = 3.63 m/s
Explanation:
First, we will calculate the total displacement of the quarterback, taking forward direction as positive:
Total Displacement = 15 m - 3 m + 24 m = 36 m
Now, we will calculate the total time taken for this displacement:
Total Time = 3 s + 1.71 s + 5.2 s = 9.91 s
Therefore, the average velocity will be:
[tex]Average\ Velocity = \frac{Total\ Displacement}{Total\ Time}\\\\Average\ Velocity = \frac{36\ m}{9.91\ s}[/tex]
Average Velocity = 3.63 m/s
what is the time taken by moving body with acceleration 0.1m/s2 if the initial or finak velocities are 20m/s and 30m/s respectively?
Answer:
t= 100s
Explanation:
use v=v0+at
plug in givens and solve for t
30=20+0.1*t
t= 100s
An airplane increases its speed at the average rate of 15 m/s2. How much time does it take to increase its speed from 100 m/s to 160 m/s
Answer:
4 s
Explanation:
Acceleration (a) = 15 m/s²Initial velocity (u) = 100 m/sFinal velocity (v) = 160 m/sWe are asked to calculate time taken (t).
By using the first equation of motion,
[tex]\longrightarrow[/tex] v = u + at
[tex]\longrightarrow[/tex] 160 = 100 + 15t
[tex]\longrightarrow[/tex] 160 - 100 = 15t
[tex]\longrightarrow[/tex] 60 = 15t
[tex]\longrightarrow[/tex] 60 ÷ 15 = t
[tex]\longrightarrow[/tex] 4 s = t
A 0.500-kg block slides up a plane inclined at a 30° angle. If it slides 1.50 m before coming to rest while encountering a frictional force of 2 N, find (a) its acceleration, and (b) its initial velocity.
Question 7 of 10
A railroad freight car with a mass of 32,000 kg is moving at 2.0 m/s when it
runs into an at-rest freight car with a mass of 28,000 kg. The cars lock
together. What is their final velocity?
A.1.1 m/s
B. 2.2 m/s
C. 60,000 kg•m/s
D. 0.5 m/s
Answer:
a
Explanation:
you take 32,000kg ÷2.0m
Mary needs to row her boat across a 160 m-wide river that is flowing to the east at a speed of 1.5 m/s. Mary can row with a speed of 3.6 m/s. If Mary points her boat due north, how far from her intended landing spot will she be when she reaches the opposite shore? What is her speed with respect to the shore?
Answer: 66.67 m, 44.44 s
Explanation:
Given
Velocity of flow is [tex]u=1.5\ m/s[/tex]
Mary can row with speed [tex]v=3.6\ m/s[/tex]
Width of the river [tex]y=160\ m[/tex]
Flow will drift the Mary towards east, while Mary boat will cause it to travel in North direction
time taken to cross river
[tex]\Rightarrow t=\dfrac{160}{3.6}\\\\\Rightarrow t=\dfrac{400}{9}\ s[/tex]
Flow will drift Mary by
[tex]\Rightarrow x=ut\\\\\Rightarrow x=1.5\times \dfrac{400}{9}\\\\\Rightarrow x=66.67\ m[/tex]
Velocity w.r.t shore is
[tex]\Rightarrow v_{net}=\sqrt{3.6^2+1.5^2}\\\Rightarrow v_{net}=\sqrt{15.21}\\\Rightarrow v_{net}=3.9\ m/s[/tex]
A car of mass 500 kg increases its velocity from 40 metre per second to 60 metre per second in 10 second find the distance travelled and amount of force applied
Answer:
it is answer of u are question
) Efficiency of a lever is always less than hundred percent.
Yes. Because it opposes the law of friction
I hope this helps.
Explanation:
Please mark me brainliest
The density of blood is 1055 kg/m3 . If the blood at the very top of your head exerts a minimum gauge pressure of 45 mm Hg (6000 Pa), estimate the gauge pressure at your heart in pascals.
Answer:
P = 10135.6 Pa
Explanation:
For this exercise we use that the pressure varies with the height
P = P₀ + ρ g h
where h is the height from the head to the heart, which is approximately
h = 40 cm = 0.40m and P₀ is the head pressure P₀ = 6000 Pa
P = 6000 + 1055 9.8 0.40
P = 6000 + 4135.6
P = 10135.6 Pa
In the following image, atoms are represented by colored circles. Different colors represent different types of atoms. If
atoms are touching, they are bonded.
Which of the following boxes shows a mixture of different compounds?
A
B
C
E
Answer:
Explanation:
There are all kinds of things floating around in B. The large dark blue and the smaller dark blue are one kind of compound.
The yellow by itself could be from column 18.
So could the smaller dark blue circle (be from column 18).
There are Big blue ones that have only 1 small blue one associated with it and others with one Big blue and two smaller light blues.
B is the answer to your question.
It takes 130 J of work to compress a certain spring 0.10m. (a) What is the force constant of this spring? (b) To compress the spring an additional 0.10 m, does it take 130 J, more than 130 J or less than 130 J? Verify your answer with a calculation.
Explanation:
Given that,
Work done to stretch the spring, W = 130 J
Distance, x = 0.1 m
(a) We know that work done in stretching the spring is as follows :
[tex]W=\dfrac{1}{2}kx^2\\\\k=\dfrac{2W}{x^2}\\\\k=\dfrac{2\times 130}{(0.1)^2}\\\\k=26000\ N/m[/tex]
(b) If additional distance is 0.1 m i.e. x = 0.1 + 0.1 = 0.2 m
So,
[tex]W=\dfrac{1}{2}kx^2\\\\W=\dfrac{1}{2}\times 26000\times 0.2^2\\\\W=520\ J[/tex]
So, the new work is more than 130 J.
A 200-lb man carries a 10-lb can of paint up a helical staircase that encircles a silo with radius 30 ft. If the silo is 60 ft high and the man makes exactly two complete revolutions, how much work is done by the man against gravity in climbing to the top
Answer:
17.07 kJ
Explanation:
The work done against gravity by the man W equals the potential energy change of the man and can of paint, ΔU
W = ΔU = mgΔy where m = mass of man and can of paint = 200 lb + 10 lb = 210 lb = 210 × 1 kg/2.205 lb, g = acceleration due to gravity = 9.8 m/s² and Δy = height of silo = 60 ft = 60 × 1m/3.28 ft
Since W = mgΔy, we substitute the values of the variables into the equation.
So,
W = mgΔy
W = 210 lb × 1 kg/2.205 lb × 9.8 m/s² × 60 ft × 1m/3.28 ft
W = 123480/7.2324 J
W = 17073.2 J
W = 17.0732 kJ
W ≅ 17.07 kJ
Why are objects measured?
In order to find out how long/wide/heavy/high/dense/deep/ massive/voluminous/reflective/opaque/ tansparent/warm/cold/hard/soft/ malleable/flexible/rigid/radioactive/old/ valuable/symmetrical/flat/regular/ irregular they are.
In a way that you can easily and conveniently describe to other people.
A wheel rotates about a fixed axis with an initial angular velocity of 13 rad/s. During a 8-s interval the angular velocity increases to 57 rad/s. Assume that the angular acceleration was constant during this time interval. How many revolutions does the wheel turn through during this time interval
Answer:
The number of revolutions is 44.6.
Explanation:
We can find the revolutions of the wheel with the following equation:
[tex]\theta = \omega_{0}t + \frac{1}{2}\alpha t^{2}[/tex]
Where:
[tex]\omega_{0}[/tex]: is the initial angular velocity = 13 rad/s
t: is the time = 8 s
α: is the angular acceleration
We can find the angular acceleration with the initial and final angular velocities:
[tex] \omega_{f} = \omega_{0} + \alpha t [/tex]
Where:
[tex] \omega_{f} [/tex]: is the final angular velocity = 57 rad/s
[tex] \alpha = \frac{\omega_{f} - \omega_{0}}{t} = \frac{57 rad/s - 13 rad/s}{8 s} = 5.5 rad/s^{2} [/tex]
Hence, the number of revolutions is:
[tex] \theta = \omega_{0}t + \frac{1}{2}\alpha t^{2} = 13 rad/s*8 s + \frac{1}{2}*5.5 rad/s^{2}*(8 s)^{2} = 280 rad*\frac{1 rev}{2\pi rad} = 44.6 rev [/tex]
Therefore, the number of revolutions is 44.6.
I hope it helps you!
A nerve impulse travels along a myelinated neuron at 90.1 m/s.
What is this speed in mi/h?
Answer:
201.5537 mph
Explanation:
Given the following data;
Speed = 90.1 m/s
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
Speed = distance/time
To convert this value into miles per hour;
Conversion;
1 meter = 0.000621 mile
90.1 meters = 90.1 * 0.000621 = 0.05595 miles
1 metre per second = 2.237 miles per hour
90.1 meters per seconds = 90.1 * 2.237 = 201.5537 miles per hour
90.1 m/s = 201.5537 mph
the magnitude of the magnetic field at point p for a certain electromagnetic wave is 2.21. What is the magnitude of the elctic field for that wave at P
Answer:
[tex]6.63\times 10^8\ N/C[/tex]
Explanation:
Given that,
The magnitude of magnetic field, B = 2.21
We need to find the magnitude of the electric field. Let it is E. So,
[tex]\dfrac{E}{B}=c\\\\E=Bc[/tex]
Put all the values,
[tex]E=2.21\times 3\times 10^8\\\\=6.63\times 10^8\ N/C[/tex]
So, the magnitude of the electric field is equal to [tex]6.63\times 10^8\ N/C[/tex].
Images formed by a convex mirror are always
Answer:
Images formed by a convex mirror are always virtual
Explanation:
A virtual image is always created by a convex mirror, and it is always situated behind the mirror. The picture is vertical and situated at the focus point when the item is far away from the mirror. As the thing approaches the mirror, the image follows suit and increases until it reaches the same height as the object.
OAmalOHopeO
A small object A, electrically charged, creates an electric field. At a point P located 0.250 m directly north of A, the field has a value of 40.0 N/C directed to the south. If a second object B with the same charge as A is placed at 0.250m south of A (so that objects A and B and point P follow a straight line), what is the magnitude of the total electric field produced by the two objects at P?
Answer:
E_total = - 50 N / A
Explanation:
The electric field is a vector magnitude whereby
E_total = Eₐ + E_b
where the bold letters indicate vectors, in this case the charges of the two objects A and B are the same and they are on the same line
E_total = - E_a - E_b
the electric field for a point charge is
E_a = [tex]k \ \frac{q_a}{r_a^2 }[/tex]
qₐ= Eₐ rₐ² / k
indicates that Eₐ = 40.0 N / C
qₐ = 40.0 0.250²/9 10⁹
qₐ = 2.777 10⁻¹⁰ C
indicates that the charge of the two points is the same
qₐ = q_b
E_total = - k qₐ / rₐ² - k qₐ / (2 rₐ)²
E_total = [tex]-k \ \frac{q_a}{r_a^2} \ ( 1 + \frac{1}{4} )[/tex]
we calculate
E_total = - 40.0 (5/4)
E_total = - 50 N / A
An aircraft has a glide ratio of 12 to 1. (Glide ratio means that the plane drops 1 m in each 12 m it travels horizontally.) A building 45 m high lies directly in the glide path to the runway. If the aircraft dears the building by 12 m, how far from the building does the aircraft touch down on the runway
The aircraft is 12 meters higher than the building so it is at 45 + 12 = 57 meters high.
For every 12 meters it travels it drops 1 m.
Divide the height by 12 to find the distance it travels:
57 / 12 = 4.75
It touches down 4.75 meters from the building.
The building is 684 meters away from the aircraft touching down on the runway.
What are trigonometric functions?A right-angled triangle's side ratios are the easiest way to express a function of an arc or angle, such as the sine, cosine, tangent, cotangent, secant, or cosecant. These functions are known as trigonometric functions.
As given in the problem an aircraft has a glide ratio of 12 to 1. (Glide ratio means that the plane drops 1 m in each 12 m it travels horizontally.) A building 45 m high lies directly in the glide path to the runway. If the aircraft clears the building by 12 m,
the total height of the aircraft when it clears the building = 45 +12
the total height of the aircraft when it clears the building is 57 meters
It is given that the Glide ratio is 12:1,
The distance of the building from touch down on the runway = 12 ×57
The distance of the building from the touch-down on the runway is 684 meters.
Thus, the building is 684 meters away from the aircraft touching down on the runway.
Learn more about the trigonometric functions here,
brainly.com/question/14746686
#SPJ2
how can scientific method solve real world problems examples
a girl is moving with a uniform velocity of 1.5 m/s then mathematically find her acceleration
Answer:
0
Explanation:
a = dv/dt
if v is constant than the slope of the v graph will be 0, so dv/dt is 0
a= 0
The image of the object formed by the lens is real, enlarged and inverted. What is the kind of lens ?
Answer:
Converging (convex) lens.
Explanation:
A lens can be defined as a transparent optical instrument that refracts rays of light to produce a real image.
Basically, there are two (2) main types of lens and these includes;
I. Diverging (concave) lens.
II. Converging (convex) lens.
A converging (convex) lens refers to a type of lens that typically causes parallel rays of light with respect to its principal axis to come to a focus (converge) and form a real image. Thus, this type of lens is usually thin at the lower and upper edges and thick across the middle.
Basically, the image of the object formed by a converging (convex) lens. lens is real, enlarged and inverted.
