A bat is flying at 0.6 m/s when it spots an appetizing insect. The bat accelerated at a rate of 1.2m/s2 for 1.9
seconds. How fast is the bat traveling at the time?

Answer: C. The material

Explanation:

In order to check whether a material conducts electricity, the first thing to do would be to design a circuit. Connect a positive wire to the batteries and then another wire from the battery to the bulb and then a wire from the bulb as well.

Then bring different materials to test for conductivity by connecting the wires to the material. If the bulb lights then it is a conductor and if it doesn't the material is not a conductor. The material is therefore the changing variable.

Answer:

matter is any substance that has mass and takes up space by having volume.

Explanation:

Matter is anything that has a mass and it takes up space or has a volume .

matters are made up many atoms or molecules .

hope it is helpful to you

stay safe, happy and healthy

Answer:

increasing wavelength near beach

Explanation:

When wavelength increases, frequency of these waves decreases and the waves suddenly stop.

This is also called damped oscillation.

Answer:

4.88 K.

Explanation:

From the question given above, the following data were obtained:

Number of mole (n) = 5 moles

Pressure (P) = 1 atm

Volume (V) = 2 L

Gas constant (R) = 0.082 atm.L/Kmol

Temperature (T) =?

The temperature of the gas can be obtained by using the ideal gas equation as illustrated below:

PV = nRT

1 × 2 = 5 × 0.082 × T

2 = 0.41 × T

Divide both side by 0.41

T = 2 / 0.41

T = 4.88 K

Therefore, the temperature of the gas is 4.88 K.

Answer:

According to the law of conservation of energy, energy is neither created nor destroyed but changes from one form to another

The energy in the light bulb comes from the movement of electrons through the resistance of the coil of the bulb, therefore, the energy in the bulb is changed from electric energy to heat and light energy as follows;

The friction between the moving electrons and the resistive filament of the light bulb results in the slowing down of the rapidly moving electrons

The part change in the (kinetic) energy of the electrons moving through the filament of the bulb as they slow down is observed as sensible heat which causes the bulb to be hot

Another part of the change in energy is given seen as the light given off by the bulb filament in an incandescent bulb as the filament becomes very hot from the movement of the electrons which causes the bulb to glow (produce light), due to the incandescent characteristics of the filament

Explanation:

Yeah, hand signals are important in officiating games. The hand signals are given by the referee who first signals the fault and then indicates which team has won the point. A point is indicated by one finger at the side of the court to indicate the winner of the rally.

Answer:

See Explanation

Explanation:

The frequency of sound waves received by the microphone influences the output or pitch of the sound obtained from the microphone.

The higher the frequency of the sound received by the microphone, the higher the output of the microphone and vice versa. This is because, the higher the frequency of sound, the higher the oscillations produced and the greater the output of the microphone.

The rise and fall in the pitch of sound waves as the frequency of sound waves varies is called inflection.

Answer:

b

Explanation:

cuz im smart

Answer:

592000 J

Explanation:

We'll begin by converting 3.7×10⁵ Pa to Kg/ms². This can be obtained as follow:

1 Pa = 1 Kg/ms²

Therefore,

3.7×10⁵ Pa = 3.7×10⁵ Kg/ms²

Next, we shall determine the workdone.

Workdone is given by the following equation:

Workdone (Wd) = pressure (P) × change in volume (ΔV)

Wd = PΔV

With the above formula, the work done can be obtained as follow:

Pressure (P) = 3.7×10⁵ Kg/ms²

Change in volume (ΔV) = 1.6 m³

Workdone (Wd) =?

Wd = PΔV

Wd = 3.7×10⁵ × 1.6

Wd = 592000 Kgm²/s²

Finally, we shall convert 592000 Kgm²/s² to Joule (J). This can be obtained as follow:

1 Kgm²/s² = 1 J

Therefore,

592000 Kgm²/s² = 592000 J

Therefore, the Workdone is 592000 J.

Answer:

Explanation:

Force= (q1q2)/(4/\Ęr2)

3×10^6= (1.602×10^-19)^2/(r^2)

r^2=(2.27×10^-33)/(3×10^6)

r^2=8.55×10^-45

r= 9.25×10^-23

The process of filtration of swamp water using a filtering material such as neat clothes will make the water clearer and remove any bad smell.

Filtration is a separation technique used to separate insoluble solids from a liquid.

Filtration is employed in water purification.

Water purification is done in water purification plants.

A locally designed purification process for swamp water will involve using materials such as:

The T-shirt is used filter out mud and sediments.

Repeated filtrations will make the water clearer and remove any bad smell.

Learn more about filtration at: https://brainly.com/question/552187

Answer:

Moment is the product of force and its perpendicular distance from a point along its line of action.

The net moments on clockwise and anticlockwise is zero at a point.

The net force applied on a spanner handle is equal to the moment of the rotation

Answer:

0.66

Explanation:

Follow the Density Formul d = m/v

so

d = 5.29/8

= 0.66 Density

Just correct me if I'm wrong, I mean like literally :> Thank you! ^^

Answer:

Explanation:

First off, we need the mass in kg and it's in g so we have to convert it. Then we can do the problem. 200 g = .200 kg. Moving on.

The equation used to find the tension in the string is the same one we use to find the centripetal force, because the tension is what is upplying the centripetal force needed to keep the stone moving in a circular manner. The formula for that is

[tex]F_c=T=\frac{mv^2}{r}[/tex] where ma is the mass in kg, v is the velocity in m/s, and r is the radius of the circle about which the stone spins in meters.

Filling in:

[tex]T=\frac{(.200)(2)^2}{2}[/tex] which gives us

T = .4 N

Answer:

250mn

Explanation:

Answer:

YOUR answer is given below:

Explanation:

Drug B will retain the highest percentage of initial concentration.

First order degradation means that both solution will degrade by same amount in same time because first order is directly proportional relationship between given both aqueous solution.

Given that Ten (10) ml aqueous solutions of drug A (10% w/v) and drug B (25% w/v) are stored in two identical test tubes.

Since, initially concentration of Drug B is more. Therefore, at all instant concentration of Drug will be highest.

Learn more:

brainly.com/question/17029235

Substance:-

Answer:

W = 24 J

Explanation:

Given that,

Applied force, F = 60 N

Distance moved, d = 40 cm = 0.4 m

We need to find the work done by the carpenter. We know that,

Work done, W = Fd

Put all the values,

W = 60 N × 0.4 m

= 24 J

Hence, the required work done is equal to 24 J.

Answer:

(C) 250

Explanation:

Given the following data;

Mass = 10 kg

Distance = 50 m

Force applied = 10 N

Angle = 60°

To find the work done on the box, we would first of all find the horizontal component of the force applied.

[tex] Horizontal force, Fx = mgCosd[/tex]

Where;

Fx represents the horizontal force.

m is the mass of an object.

g is the acceleration due to gravity.

d is the angle of inclination (theta).

mg = weight = 10 N

Substituting into the equation, we have;

[tex] Fx = 10 * Cos60 [/tex]

[tex] Fx = 125 * 0.5 [/tex]

Fx = 5 Newton

Next, we find the work done.

Mathematically, workdone is given by the formula;

[tex] Workdone = force * distance[/tex]

Substituting into the formula, we have;

[tex] Workdone = 5 * 50 [/tex]

Workdone = 250 Nm

Answer:

Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as described by Maxwell's equations.

Answer:

36000

Explanation:

1/2mv²=0.5×500×12²=36000j

Answer:

Explanation:

The formula for the magnitude of this resultant vector, which is in Q1, btw, is:

[tex]B_{mag}=\sqrt{6.18^2+4.43^2}[/tex] which gives us, to 3 sig fig's:

7.60 m. Since the resultant vector is in Q1, we don't need to add anything to the angle once we find it to 3 sig fig:

[tex]tan^{-1}(\frac{4.43}{6.18})[/tex] gives us an angle of 35.6 degrees

Answer:

Length of the wire in meters​ = 0.000628 meter (Approx.)

Explanation:

Given:

Diameter of wire = 0.2 mm

Find:

Length of the wire in meters​

Computation:

Radius of wire = 0.2 / 2

Radius of wire = 0.1

Length of the wire = Circumference of circle

Circumference of circle = 2πr

Length of the wire = 2πr

Length of the wire = 2(3.14)(0.1)

Length of the wire = 0.628 mm (Approx.)

1 meter = 1,000 mm

So,

Length of the wire in meters​ = 0.000628 meter (Approx.)

Answer:

the final pressure of the gas is 60 kPa.

Explanation:

Given;

initial pressure of the gas, P₁ = 50 kPa = 50,000 Pa

initial temperature of the gas, T₁ = 27⁰ C = 27 + 273 = 300 k

final temperature of the gas, T₂ = 87⁰ C = 87 + 273 = 360 K

Let the final pressure of the gas = P₂

Apply pressure law;

[tex]\frac{P_1}{T_1} = \frac{P_2}{T_2} \\\\P_2 = \frac{P_1T_2}{T_1} = \frac{50,000 \times 360}{300} = 60,000 \ Pa = 60 \ kPa[/tex]

Therefore, the final pressure of the gas is 60 kPa.

Answer:

Explanation:

You didn't fill in the proper masses which is why you never got an answer to this. But that's ok...I got you. I happen to know what they are! We will use the universal law of gravitation and the gravitational constant to solve this.

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] and filling in:

[tex]F_g=\frac{(6.67*10^{-11})(5.98*10^{24})(7.36*10^{22})}{(3.84*10^8)^2}[/tex] The denominator is the radius of the earth plus the radius of the moon plus the distance between their surfaces, just FYI.

That gives us that

[tex]F_g=1.99*10^{20}N[/tex] Not sure what your choices entail, but I'd have to say, taking into consideration that maybe your problem didn't figure in the distance between the surfaces, you'd be at choice B.

Answer:

a) actual reading=2mm+(0.1×8)=2.8 mm=0.28 cm

b)actual reading=5 mm+(0.1×7)=5.7mm=0.57 cm

c)actual reading=9 mm=0.9 cm

d)actual reading=0 mm+(0.1×7)=0.7 mm=0.07 cm

e)actual reading=19 mm+(0.1×9)=19.9 mm=1.99 cm

f)actual reading=15 mm+(0.1×3)=15.3 mm=1.53 cm

g)actual reading=11 mm(0.1×5)=11.5 mm=1.15 cm

Answer:

new PE at top=original PE - energy lost

mgh=.2(9.8)20-30

Explanation:

mgh=.2(9.8)20-30 = 9.2

Answer: The energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Explanation:

Given: Mass = 250 kg

Initial temperature = [tex]16^{o}C[/tex]

Final temperature = [tex]38^{o}C[/tex]

Specific heat capacity = 4200 [tex]J/kg^{o}C[/tex]

Formula used to calculate the energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

C = specific heat capacity

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = 250 kg \times 4200 J/kg^{o}C \times (38 - 16)^{o}C\\= 250 kg \times 4200 J/kg^{o}C \times 22^{o}C[/tex]

As it is given that water absorbs 25% of the energy incident on the solar panel. Hence, energy incident on the solar panel can be calculated as follows.

[tex]\frac{25}{100} \times q = 250 kg \times 4200 J/kg^{o}C \times 22^{o}C\\q = 9.24 \times 10^{7} J[/tex]

Thus, we can conclude that the energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Answer:

h = 0.2 m

Explanation:

Given that,

A pendulum is moving 2.0 m/s at the bottom of its swing.

We need to find the height high it swing back. Let the height is h.

Using the conservation of energy such that,

[tex]\dfrac{1}{2}mv^2=mgh\\\\h=\dfrac{v^2}{2g}[/tex]

Put all the values,

[tex]h=\dfrac{(2)^2}{2\times 10}\\\\h=0.2\ m[/tex]

So, it will reach to a height of 0.2 m.