Which will boil faster distilled water or salt water and why?

Answers

Answer 1

Answer:

The distilled water will be boiled faster as it does not contain any non - volatile solute.

- The salty water contains different non - volatile salts in it.

- Due to the presence of these salts, its vapour pressure will be decreased and boiling point will be elevated.

- So, salty water will take more time to boil.

- On the other hand, distilled water does not have any such solute and due to this its vapour pressure will not be affected.

- Hence, it will boil fast than salty water.


Related Questions

How many Group 17 elements are in Period 3 of the Periodic Table? A) 1 B) 2 C) 3 D) 4

Answers

Answer: A (1)

I hope that helps :)

Balance the equation above please ​

Answers

Answer:

Balanced Equation:-

Al2(CO3)3. ---heat---> Al2O3 + 3 CO2

Answer:

everything can be found in the picture

the correct sequence where reactivity towards oxygen increases.

Answers

Answer:

Option D is good to go!

Explanation: as per the reactivity series more reactive substances will react with the counterpart substance.The most reactive substance here is calcium while the least reactive is aluminium, the magnesium comes in between.As per their reactivity, these substances will react with oxygen.

Explanation:

6. Which of the following represent kinetic energy? *
(1 Point)
the water behind a dam
O a boulder hug from a net over a pit
a calculator falling to the floor
the string on a bow before being released

Answers

Answer:

weter

Explanation:

what is the state of matter that takes shape of a container???

Answers

Answer:

Liquid and gas is the matter that takes shape of a container

It can also be called fluid since fluid is distributed into liquid and gas

Explanation:

I hope that is enough for your answer, hope this will help

Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion

Answers

Explanation:

Anything that occupies space and has mass is called matter.

(a) Inter particle space

Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.

(b) Inter particle force of attraction

Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.

(c) Particle motion

Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.  

Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points

Answers

Answer:

chlorine is larger so the symbol is <

Explanation:

You are a NASCAR pit crew member. Your employer is leading the race with 20 laps to go. He just finished a pit stop and has 5.0 gallons of fuel in the tank. On the way out of the pits, he asks, "Am I going to have enough fuel to finish the race or am I going to have to make another pit stop?" You whip out your calculator and begin your calculations based on your knowledge of stoichiometry. Other information you know is: The car uses an average of 300.0 grams of O2 for each lap. The formula for fuel is C5H12. The fuel has a density of 700 g/gal. What do you tell the driver? (The density can be used as a conversion factor between grams and gallons)

Answers

Answer:

Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.

Explanation:

Density = mass / volume

Density of fuel = 700 g/ 1 gal

Therefore, the mass of fuel in 1 gallon = 700 g

The driver has 5.0 gallons of fuel in the tank.

The mass of 5.0 gallons of fuel = 5 × 700 = 3500 g of fuel

Equation of the combustion of fuel, C₅H₁₂ is given below:

C₅H₁₂ + 8 O₂ ---> 6 H₂O + 5 CO₂

1 mole C₅H₁₂ requires 8 moles of O₂

1 mole of C₅H₁₂ has a mass = 72 g

8 moles of O₂ has a mass = 256 g

Therefore, 300 g of O₂ will require 300 × (72/256) g of C₅H₁₂ = 84.375 g of C₅H₁₂

84.375 g of fuel is used by the car per lap;

20 laps will require 20 × 84.375 g of fuel = 1687.5 g of fuel.

Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.

Describe the formation of calcium chloride (4 marks)

Answers

Answer:

It is an ionic compound that consists of one calcium cation Ca2+ and two chlorine anions. The bivalent calcium metal forms an ionic bond with two chlorine atoms. The formation of cacl2 happens mainly by reacting limestone (CaCo3) with hydrochloric acid (HCl).

any of ya'll good at chemistry?????​

Answers

Answer:

i good at chemistry

Explanation:

not all but i try

A compound being used in experimental medicine is 78.14% boron (B) and 21.86% hydrogen (H). The empirical formula of the compound will have a boron to hydrogen ratio of

Answers

Explanation:

I did it step by step so It would be easier to understand:)

existen mas de 10 millones de cmpuestos organicos o inorganicos

Answers

so dfhhdjdjjfjfjjdjdjdj

Struggling on this problem.

Answers

Answer:

4Al + 3O2 ----> 2Al2O3

Explanation:

first blank 4

second blank 3

third blank 2

Using the following balanced equation, if you had 48 molecules of O2,
how many molecules of SO3 would you produce?
S8 + 12O2 --> 8SO3

Answers

Explanation:

hope this helps u understand:)

_______ reach the surface first during an earthquake.


Rayleigh waves


P waves


Love waves


S waves

Answers

Answer:p waves hope that helps

What is the volume of .750 M hydrochloride acid required to react completely with 25.00 mL of .290 M NaOH solution?

Answers

from

HCl + NaOH----> NaCl +H2O

n of acid=1

n of base=1

Molarity of acid=750M

Molarity of base=290M

volume of base=25ml

from

Va=Mb ×vb×na

Ma×nb

Va=290×25×1

750×1

Va=7250

750

Va=9.67ml

The volume of .750 M hydrochloride acid is required to react completely with 25.00 mL of .290 M NaOH solution is 9.67ml

HCl + NaOH----> NaCl +H2O

n of acid=1

n of base=1

Molarity of acid=750M

Molarity of base=290M

volume of base=25ml

Therefore,

Va=Mb ×vb×na

Ma×nb

Va=290×25×1

750×1

Va=7250

750

Hence,

Va=9.67ml

What is Hydrochloric acid?

Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctively pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.

Learn more about Hydrochloric acid

https://brainly.com/question/27808720

#SPJ2

Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding

Answers

Answer:

d

Explanation:

Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!

Hydrogen and nitrogen react to form ammonia. The chemical equation for this reaction is shown here. 3 H2(g) + N2(g) 2 NH3(g). What amount of hydrogen will produce 44.0 mol of ammonia?
66.0 mol
88.0 mol
132.0 mol
29.3 mol

Answers

Answer:

someone already answered but i think it's 132.0 mol too

How many atoms are in 9.8 moles of NaCl?

Answers

Answer:

a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer

Explanation:

There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.

How to calculate number of atoms?

The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.

no of atoms = no of moles × 6.02 × 10²³

According to this question, there are 9.8 moles of NaCl.

no of atoms = 9.8 × 6.02 × 10²³

no of atoms = 5.896 × 10²⁴

Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.

Learn more about number of atoms at: https://brainly.com/question/8834373

#SPJ2


Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.

Answers

Answer:

Catalysts allow chemical reactions to occur at temperatures at which the organism lives.

Explanation:

Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.

Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.

What is the uses of seawater as a source of renewable energy?​

Answers

Explanation:

Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.

What is a natural disaster?

Answers

Answer:

Explanation:

A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes

Answer:

A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.

I
I-U-I
I-U-I
H
-U-I
H-C-HH-C-H
I
U-U-I
Ti
I-U-I

Answers

c. m c a nil xxeese

Which statement about the mass of an electron is correct? A The mass of an electron is equal to the mass of the proton. B The mass of an electron is less than the mass of the proton. с The mass of an electron is equal to the mass of a neutron. D The mass of an electron is greater than the mass of a neutron.​

Answers

Answer:

B

Explanation:

because mass of an electron is 1/2000.

The statement about the mass of an electron which is correct is: B. The mass of an electron is less than the mass of the proton.

An atom refers to a smallest, indivisible unit that comprises the matter that forms all chemical elements. Therefore, atoms are typically considered as the fundamental building blocks of matter which determines the structure of a chemical element.

Basically, an atom consists of three (3) distinct particles and these include;  

Protons. Neutrons. Electrons.

Electrons are the subatomic particles of a chemical element that are negatively charged with a magnitude of -1.

On the other hand, protons can be defined as the subatomic particles of a chemical element that are positively charged.

All of these subatomic particles of a chemical element has a mass. However, the mass of an electron is significantly less than the mass of proton, as a result of its extremely small size.

In conclusion, the mass of an electron is approximately 2000 times smaller than that of a proton and as such contributes almost nothing to the total mass of an atom.

Find more information: https://brainly.com/question/18214726

Q.does salt make water boil at a higher temperature?

Answers

Answer:

Yes

Explanation:

The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.

This graph represents a population of molecules in a gas versus the distribution of the average velocity(speed) of its molecules in that population. Assume all molecules to be of the same mass. In reading the graph, it is important to note three things. One, is the most probable speed is at the peak of the curve. Secondly, the most probable speed increases as the temperature increases (so shift to the right), and the distribution broadens as it increases.


On the graph, indicate the average kinetic energy of the population.

Explain your answer.

What part of the graph indicates the temperature of the sample?

Explain your answer.

Sketch a curve that represents the distribution of molecules at a temperature below the one shown. Label it as T2. Describe both T and T2 in terms of their average kinetic energy. Be specific and detailed.

Submit your answer below.

Answers

Answer:

Part A

Given that the graph is symmetrical and bell shaped, the average kinetic energy is given by the midline of graph, which corresponds to the common speed of the highest number of the population

Part B

The formula for the average kinetic energy, K.E. = (3/2)·(R/NA)·T

Therefore, the part of the graph that indicates the temperature of the sample is the average kinetic energy. K.E.

Part C

At a lower temperature, the heat is less evenly distributed and we have the distribution T2 higher than T1

Please see the attached graph created with MS Visio

Explanation:

A presión de 3atm, 7L de un gas a temperatura constante experimenta un cambio ocupando un volumen de 0,5L ¿Cuál será la presión que ejerce? ayuda

Answers

Answer:

La presión que ejerce es 42 atm.

Explanation:

La ley de Boyle relaciona la presión y el volumen y dice que  el volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión.

La ley de Boyle se expresa matemáticamente como:

P*V=k

Ahora es posible suponer que tienes un cierto volumen de gas V1 que se encuentra a una presión P1 al comienzo del experimento. Si varias el volumen de gas hasta un nuevo valor V2, entonces la presión cambiará a P2, y se cumplirá:

P1*V1= P2*V2

En este caso:

P1= 3 atmV1= 7 LP2= ?V2= 0.5 L

Reemplazando:

3 atm* 7 L= P2* 0.5 L

Resolviendo:

[tex]P2=\frac{3 atm*7 L}{0.5 L}[/tex]

P2= 42 atm

La presión que ejerce es 42 atm.

Answer:10.5

Explanation:

3atm x 7L / 0,5L = 10.5

Quando bajamos el volmen sube la presion y cuando bajamos la presion sube el volumen

(04.03 MC)

The table shows the nature of the reactants and products formed in a certain type of chemical reaction.

Nature of Reactants and Products

Reactants

lonic compound + lonic compound

Products

lonic compound + lonic compound

Which of the following is true about this type of chemical reaction?

It is a single replacement reaction, and all four compounds are different.

It is a double replacement reaction, and all four compounds are different.

It is a single replacement reaction, and each compound has the same set of ions.

It is a double replacement reaction, and each compound has the same set of ions.

Answers

Answer: The given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.

Explanation:

When two different compounds chemically react with each other and their ions get exchanged with each other then it leads to the formation of two new compounds. This type of reaction is called double displacement reaction.

For example, [tex]KBr + AgNO_{3} \rightarrow KNO_{3} + AgBr(\downarrow)[/tex]

Here, both KBr and [tex]AgNO_{3}[/tex] are ionic compounds that leads to the formation of two new ionic compounds which are [tex]KNO_{3}[/tex] and AgBr.

Thus, we can conclude that the given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.

23. What type of chemical reaction is: CH, + 0→ CO2 + H20
a. Combustion
b. Neutralization
C. Synthesis
d. Double Replacement

Answers

Answer:

combustion

Explanation:

bsnszisb idiej jeiieyv

the answer is combustion

What is the term for the repeating pattern in a crystalline structure?
a) Repeating pattern
b) Base pattern
c) Unit cell
d) Primitive pattern

Answers

Answer:

Because a crystalline solid consists of repeating patterns of its components in three dimensions (a crystal lattice), we can represent the entire crystal by drawing the structure of the smallest identical units that, when stacked together, form the crystal. This basic repeating unit is called a unit cell.Aug 12, 2020

Other Questions
What is the volume of this. Pyramid720 cm21080cm21440 cm22160 cm2 An alkyl groyp has a formula of CxH6, determine the value of x True or False.Summer decides not to go with Jake at the end. Using the present tense of dcouvrir and ouvrir reply back with I have already covered it.1. Je veux dcouvrir ce que (what) nos amis vont nous offrir.2. Je veux ouvrir toutes les fentres. Customers at a restaurant can build their own burrito by choosing one item from each category shown in the table. [tex]what \: is \: acid \: \: \: {?} [/tex] Canners Company uses weighted-average costing. Beginning work in process inventory had $3,650 of material costs. During the period, $5,000 of materials and $9,250 in conversion costs were added. If there are 250 equivalent units of production for materials, the cost per equivalent unit for materials is ______. The rule as a mapping for the translation of a rectangle is (x, y) = (x - 2, y + 7). Which describes this translation?O a translation of 2 units down and 7 units to the rightO a translation of 2 units down and 7 units to the leftO a translation of 2 units to the right and 7 units upO a translation of 2 units to the left and 7 units upMark this and retum this part too #stresscrying In your previous lesson, you learned to give conclusions to a realistic fiction. This time, you will be taught to write a storywith its complete elements. Writing your own story clearly shows smartness which will help you gain self-confidence andcredence to what you write.Alter going through this lesson, you are expected to:1. write a short story (fiction/nonfiction) with its complete elements2. realize that writing is fun and will confidence in writing.Now, read the following ideas. Match the words in Column A with the statements in Column BCOLUMN BCOLUMN A1. Setting2. Character3. Plot4. Climax5. ResolutionA. The most exciting part the story where the plot is leading.B. It provides us with the when and where the story took place.C. It is the conclusion of the story.D. The people or animals that take part of the storyE. These are the events in the story. What are the solutions of x2 - 2x +17 - 0?O A. x = 1+2, or x = 1 - 2O B. X = 1+4, or x = 1- 47O c. x = 2, or x = -2O D. x = 4; or x = -4/ why did many civilzations in africa devloop near bodies of water In a survey, 15 high school students said they could drive and 15 said they could not. Out of 60 college students surveyed, 30 said they could drive. Micah concluded that knowing that a person is in college means they are more likely to drive. Is Micahs conclusion correct? Explain. if the equation 2x^2+ bx+ 5=0 has no real solutions, which of the following must be true A. b^2 < 10 B. b^2> 10 C. b^240 please answer this , like ASAP Which equation shows the point-slope form of the line that passes through (3, 2) and has a slope of 1/3 Why did Henry VIII leave the Catholic Church in the 1500s? Please help :( The picutre is right below worth 20 pionts and will mark brainliest :)oh and the question is right in the picture too also with the rest an estate valued at $75 000 is divided among three daughters Natasha, Natalie and Nadia in the ratio 5:8:2 respectively. Calculate the amount each receives slope = 4, point (3,-2) is on the line