We can use trigonometry to solve this problem. Let's call the horizontal distance from the boat to the lighthouse "x". We can use the tangent function to find x:
tangent(8 degrees) = opposite / adjacent
tangent(8 degrees) = 148 / x
To solve for x, we can rearrange the equation:
x = 148 / tangent(8 degrees)
x ≈ 1041.87 feet
So the ship's horizontal distance from the lighthouse (and the shore) is approximately 1041.87 feet or 1041.87 rounded to the nearest hundredth of a foot if necessary.
Answer:
Your answer is 1053.07
Hope I helped!
Step-by-step explanation:
Complete the recursive formula of the arithmetic s -17,-8, 1, 10, .... a(1) = -17 a(n) = a(n − 1)+
Answer:
The common difference between consecutive terms in the sequence is 8 (since -17 + 8 = -9, -9 + 8 = -1, -1 + 8 = 7, and so on). Therefore, the recursive formula for this arithmetic sequence is:
a(1) = -17
a(n) = a(n-1) + 8 for n >= 2
This formula says that the first term in the sequence is -17, and each subsequent term is found by adding 8 to the previous term.
(please mark my answer as brainliest)
Graph the function.
f(x) = 3/5x -5
Use the Line tool and select two points to graph.
Answer:
see attached
Step-by-step explanation:
You want to graph the function f(x) = 3/5x -5.
GraphFor graphing purposes, it is convenient to choose values of x that result in integer values of y. In this case, the multiplier of x (the slope) has a denominator of 5, so it is convenient to choose x-values that are multiples of 5.
For x = 0, y = 3/5·0 -5 = -5
For x = 5, y = 3/5·5 -5 = 3 -5 = -2
Suitable points for your plot are (0, -5) and (5, -2). These are shown in the attachment.
-51+((-5+(-4)) all calculation
Answer:
the answer to that is -31
any point on the parabola can be labeled (x,y), as shown. a parabola goes through (negative 3, 3)
The correct standard form of the equation of the parabola is:
[tex]y = -x^2 - 1[/tex].
To find the standard form of the equation of the parabola that passes through the given points (-3, 3) and (1, -1), we can use the general form of the equation of a parabola:
[tex]y = ax^2 + bx + c[/tex] ___________(1)
Substituting the coordinates of the two given points into this equation, we get a system of two equations in three unknowns (a, b, and c):
[tex]3 = 9a - 3b + c[/tex]
[tex]-1 = a + b + c[/tex]
To solve for a, b, and c, we can eliminate one of the variables using subtraction or addition. Subtracting the second equation from the first, we get:
[tex]4 = 8a - 4b[/tex]
Simplifying this equation, we get:
[tex]2 = 4a - 2b[/tex]
Dividing both sides by 2, we get:
[tex]1 = 2a - b[/tex]___________(2)
Now we can substitute this expression for b into one of the earlier equations to eliminate b. Using the first equation, we get:
[tex]3 = 9a - 3(2a - 1) + c[/tex]
Simplifying this equation, we get:
[tex]3 = 6a + c + 3[/tex]
Subtracting 3 from both sides, we get:
[tex]0 = 6a + c[/tex]
Solving for c, we get:
c = -6a __________(3)
Substituting this expression for c into the second equation, we get:
[tex]-1 = a + (2a - 1) - 6a[/tex]
Simplifying this equation, we get:
[tex]-1 = -3a - 1[/tex]
Adding 1 to both sides, we get:
[tex]-3a =0[/tex]
Solving for a, we get:
[tex]a = 0[/tex]
Substituting this value of a into the equation(3) for c, we get:
c = 0
Substituting a = 0 into the equation(2) for b that we found earlier, we get:
[tex]1 = 0 - b[/tex]
Solving for b, we get:
[tex]b = -1[/tex]
Putting the values of a, b and c in (1), we get
[tex]y = -x^2 - 1[/tex]
Therefore, the equation of the parabola that passes through the given points (-3, 3) and (1, -1) is:
[tex]y = -x^2 - 1[/tex]
Learn more about parabola
brainly.com/question/31142122
#SPJ4
Complete question:
A parabola goes through (-3, 3) & (1, -1). A point is below the parabola at (-3, 2). A line above the parabola goes through (-3, 4) & (0, 4). A point on the parabola is labeled (x, y).
What is the correct standard form of the equation of the parabola?
The figure is in the image attached below
PLEASE HURRY!!
Curious about people's recycling behaviors, Sandra put on some gloves and sifted through some recycling and trash bins. She kept count of the plastic type of each bottle and which bottles are properly dispensed.
What is the probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle? Please show your work.
The probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is 0.25 or 25%
What is Conditional probability?
Conditional probability is the probability of an event occurring given that another event has occurred or is known to have occurred. It is denoted by P(A|B), which reads as "the probability of A given B."
The formula for conditional probability is:
P(A|B) = P(A and B) / P(B)
where P(A and B) is the probability of both events A and B occurring, and P(B) is the probability of event B occurring.
The total number of Plastic #2 bottles is 8 (correctly placed) + 5 (incorrectly placed) = 13.
The total number of Plastic #4 bottles is 5 (correctly placed) + 2 (incorrectly placed) = 7.
The probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is given by:
(number of Plastic #4 bottles correctly placed) / (total number of bottles)
So the probability is:
5/20 = 1/4 = 0.25
Therefore, the probability that a randomly selected bottle is correctly placed AND is a Plastic #4 bottle is 0.25 or 25%.
To learn more about Conditional probability, visit the link:
https://brainly.com/question/10739997
#SPJ1
Part A
Use GeoGebra to graph points A, B, and C to the locations shown by the ordered pairs in the table. Then join each pair of
points using the segment tool. Record the length of each side and the measure of each angle for the resulting triangle.
Location
A(3,4), B(1,1).
C(5.1)
A(4.5), B(2.1).
C(7.3)
—————-
AB=
BC=
AC=
Answer:
Step-by-step explanation:
Answer:
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&AB&BC&AC\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&3.61&4&3.61\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&4.47&5.39&3.61\\\cline{1-4}\end{array}[/tex]
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&m \angle A&m \angle B&m \angle C\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&67.38^{\circ}&56.31^{\circ}&56.31^{\circ}\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&82.87^{\circ}&41.63^{\circ}&55.49^{\circ}\\\cline{1-4}\end{array}[/tex]
Step-by-step explanation:
Step 1Place points A, B and C on the coordinate grid.
Alternatively, type the following into the input field as 3 separate inputs:
Triangle 1
A = (3, 4)B = (1, 1)C = (5, 1)Triangle 2
A = (4, 5)B = (2, 1)C = (7, 3)Step 2Use the Segment tool to join each pair of points.
Alternatively, type Segment( <Point>, <Point> ) into the input field (replacing <Point> with the letter name of the point) to create a segment between two points.
Record the length of each side.
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&AB&BC&AC\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&3.61&4&3.61\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&4.47&5.39&3.61\\\cline{1-4}\end{array}[/tex]
Step 3Use the Angle tool to measure each angle in the resulting triangle.
Alternatively, type Angle(Polygon(A, B, C)) into the input field to create all interior angles.
Record the measure of each angle.
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&m \angle A&m \angle B&m \angle C\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&67.38^{\circ}&56.31^{\circ}&56.31^{\circ}\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&82.87^{\circ}&41.63^{\circ}&55.49^{\circ}\\\cline{1-4}\end{array}[/tex]
Note: All measurements have been given to the nearest hundredth (2 decimal places).
Let A and B be events with P(A) = 0.3, P(B) = 0.6, and P(A and B) = 0.03. Are A and B mutually exclusive? Explain why or why not.
Answer:
A and B are not mutually exclusive
Step-by-step explanation:
A and B are not mutually exclusive because P(A and B) > 0. If A and B were mutually exclusive, then they would have no outcomes in common and the probability of their intersection would be zero. However, in this case, they do share some outcomes, since P(A and B) is greater than zero.
PLEASE ANSWER THIS QUESTION, 20 POINTS!!
Answer:
∠1 = 50
∠2 = 50
∠3 = 80
∠4 = 130
∠5 = 130
Step-by-step explanation:
∠1 = 180 - 130 = 50
∠2 = ∠1 = 50
∠3 = 180 - ∠1 - ∠2 = 180 - 50 - 50 = 80
∠4 = 180 - ∠2 = 180 - 50 = 130
∠5 = ∠4 = 130
Given two points (x1, y1) and (x2, y2) in the cartesian plane, show that the slope
m of a line is of the form
m =y2 − y1÷x2 − x1
assuming that x2≠ x1
therefore, we have shown that: [tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex] assuming that x2 ≠ x1.
What is slope?Slope refers to the measure of steepness of a line or a curve. In mathematics, slope is usually denoted by the letter "m" and is defined as the ratio of the change in the y-coordinate to the change in the x-coordinate between two points on a line.
The formula for calculating the slope between two points (x1, y1) and (x2, y2) on a line is:
[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]
by the question.
To finds the slope of a line passing through two points (x1, y1) and (x2, y2), we use the slope formula:
[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]
This formula represents the change in y divided by the change in x between the two points.
Now, assuming that x2 ≠ x1, we can simplify the formula as follows:
[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(1/1)[/tex]
Multiplying the numerator and denominator by 1, which in this case is (x2 - x1) / (x2 - x1), we get:
[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(x_{2}-x_{1})/(x_{2}-x_{1})[/tex]
Simplifying the numerator, we have:
[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})/[(x_{2}-x_{1})*1][/tex]
The term (x2 - x1) cancels out, leaving us with:
[tex]m=(y_{2}-y_{1} /1[/tex]
To learn more about slope:
https://brainly.com/question/3605446
#SPJ1
can you help me to solve this question?
The asymptotes of the function f(x) = (2x² - 5x + 3)/(x - 2) are given as follows:
Vertical asymptote at x = 2.Oblique asymptote at: y = 2x - 3/2.How to obtain the asymptotes of the function?The function for this problem is defined as follows:
f(x) = (2x² - 5x + 3)/(x - 2)
The vertical asymptote is the value of x for which the function is not defined, hence it is at the zero of the denominator, and thus it is given as follows:
x - 2 = 0
x = 2.
The oblique asymptote is at the quotient of the two functions, hence:
(mx + b)(x - 2) = 2x² - 5x + 3
mx² + (b - 2m) - 2b = 2x² - 5x + 3.
Hence the values of m and b are given as follows:
m = 2.-2b = 3 -> b = -3/2.More can be learned about the asymptotes of a function at https://brainly.com/question/1851758
#SPJ1
From the given graph, how many students worked at least 10 hours per week?
Answer:
39.
Step-by-step explanation:
From the group of 10-14 hours worked per week, 8 students.
From the group of 15-19 hours worked per week, 4 students.
From the group of 20-24 hours worked per week, 12 students.
From the group of 25-29 hours worked per week, 8 students.
From the group of 30-34 hours worked per week, 4 students.
And finally, from the group of 35+ hours worked per week, 3 students.
So, 8+4+12+8+4+3 = 39 students.
Please help I-readyyyyyy
Is this figure a polygon dont answer if you don’t know the answer
Polygon - a plane figure with at least three straight sides and angles, and typically five or more.
Answer:
No
Step-by-step explanation:
Since a polygon has straight sides, with 3 or more, it cannot be a polygon since one side is curved.
In an effort to figure out why application rates are slipping, your college decides to set up an experiment to determine why students who are interested in the college decide to enroll or not. The college decides to send out a questionnaire to everyone who submitted an application to the college in 2017. What's the population for this study, and what's the sample?
A. The population is all college students everywhere, and the sample is all college students interested in your school.
B. The population is all college students everywhere, and the sample is the individuals who responded to the survey.
C. The population is all students who applied to your college, and the sample is the individuals who responded to the survey.
D. The population is all college students interested in your school, and the sample is everyone who decided to enroll.
The population of interest is the group of students who submitted an application to the college in 2017.
What is sample?A sample is a subset of a population that is selected and studied in order to make inferences or conclusions about the population. The sample is usually selected to be representative of the population in some way, so that the conclusions drawn from the sample can be generalized to the population as a whole.
According to question:The correct answer is C.
The purpose of the study is to determine why students who are interested in the college decide to enroll or not. Therefore, the population of interest is the group of students who submitted an application to the college in 2017.
Option A is incorrect because the population is not all college students everywhere, only those who applied to the college in question.Option B is incorrect because the sample is not just the individuals who responded to the survey, but rather all students who submitted an application in 2017.Option D is incorrect because the sample is not just everyone who decided to enroll, but rather all students who submitted an application, regardless of whether they enrolled or not.To know more about sample visit:
https://brainly.com/question/11045407
#SPJ1
for autonomous equations, find the equilibria, sketch a phase portrait, state the stability of the equilibria.
Understanding the equilibria, sketching a phase portrait, and determining the stability of equilibria for autonomous equations are important tools for analyzing and understanding the behavior of systems over time.
Autonomous equations are differential equations that do not depend explicitly on time. To find the equilibria of an autonomous equation, we set the derivative of the function to zero and solve for the values of the independent variable that satisfy the equation. These values represent points at which the function does not change over time and are known as equilibrium points.
To sketch a phase portrait for an autonomous equation, we plot the slope field of the function and then draw solutions through each equilibrium point. The resulting graph shows the behavior of the function over time and helps us understand how the solutions behave near each equilibrium point.
The stability of an equilibrium point is determined by examining the behavior of nearby solutions. If nearby solutions move toward the equilibrium point over time, the equilibrium point is stable. If nearby solutions move away from the equilibrium point over time, the equilibrium point is unstable. Finally, if the behavior of nearby solutions is inconclusive, further analysis is needed.
Here is the sketch for [tex]dx/dt = x - x^3[/tex]
/ <--- (-∞) x=-1 (+∞) ---> \
/ \
<--0--> x=-1 x=1 0-->
\ /
\ <--- (-∞) x=1 (+∞) ---> /
Learn more about equilibria here https://brainly.com/question/29313546
#SPJ4
Convert each number to scientific notation and perform the indicated operations. Express the result in ordinary decimal notation.
The result of the division in ordinary decimal notation is 300.
Scientific notation, also known as standard form or exponential notation, is a method of expressing very large or very small numbers in a compact and standardized way.
To perform the indicated operation, we need to divide 0.00036 by 0.0000012.
First, let's express both numbers in scientific notation
0.00036 = 3.6 x 10^(-4)
0.0000012 = 1.2 x 10^(-6)
Now we can divide the two numbers and simplify
3.6 x 10^(-4) / 1.2 x 10^(-6) = (3.6 / 1.2) x 10^(-4-(-6)) = 3 x 10^(2)
Finally, we can convert this result back to ordinary decimal notation
3 x 10^(2) = 300
Learn more about scientific notation here
brainly.com/question/18073768
#SPJ4
The given question is incomplete, the complete question is:
Convert each number to scientific notation and perform the indicated operations. Express the result in ordinary decimal notation. 0.00036/0.0000012
change these fractions to decimals 1/35
Answer:
Step-by-step explanation:
of the following people, who would be included in the survey conducted by the bureau of labor statistics?
The people who are included in the survey conducted by Bureau of Labor Statistics are (a) certain unpaid workers, (b) part-time workers and (c) workers on vacation, the correct option is (d).
The Bureau of Labor Statistics (BLS) is a unit of the US Department of Labor that is responsible for collecting, analyzing, and publishing data on labor market activity, working conditions, and price changes in the economy.
The Bureau of Labor Statistics (BLS) considers individuals to be employed if they meet any of the given criteria:
(i) Worked at least one hour as paid employees
(ii) Worked at least 15 hours as unpaid workers in a family-owned enterprise
(iii) Were temporarily absent from their regular jobs due to illness, vacation, strike, etc.
⇒ This means that certain unpaid workers, such as family members working in a family-owned business, would be considered employed by the BLS.
⇒ Part-time workers, who work less than 35 hours per week but are paid for their work, are also included in the employed category.
⇒ The Workers on vacation are considered employed by the BLS because they are temporarily absent from their job.
Therefore, all the options are correct , which is Option(d).
Learn more about Bureau of Labor Statistics here
https://brainly.com/question/25414516
#SPJ4
The given question is incomplete, the complete question is
Who of the following are included in the Bureau of Labor Statistics "employed" category?
(a) certain unpaid workers
(b) part-time workers
(c) workers on vacation
(d) All of the above are correct.
A spinner with 10 equally sized slices has 5 red slices, 3 yellow slices, and 2 blue slices. Ann spun the dial 25 times. It landed on red 12 times, landed on yellow 10 times, and landed on blue 3 times. From Ann's results, compute the experimental probability of landing on blue or yellow
Answer:
0.600 or 600, 0.500 or 500, select option 2
Step-by-step explanation:
help plssss explainnn!!
Answer:
[tex]xy^8[/tex]
Step-by-step explanation:
Notice if you have the same base you can ADD the exponent, for example:
[tex]x^{-6} x^{7} =x^{-6+7}=x^{1 }=x[/tex]
[tex]y^{6} y^{2} =y^{6+2}=y^{8 }\\[/tex]
so the answer is
[tex]xy^8[/tex]
Problem 2 (Vector and Matrix Refresh) Seven data points are arranged as columns of a data matrix X given as follows: 2 1 0 0 -1 0 -2 X = 2 0 1 0 0 -1 -2 a) Draw all data points on a 2D plane by hand. Properly label the two axes. Clearly provide important tick values to facilitate a precise graphical description of the data. b) Consider each point as a vector. Calculate the angle in between (2 27 and the five other points (excluding [0 07), respectively, using the inner/dot product formula that involves the angle. Note that the angle between two vectors can be negative. c) Calculate the matrix outer product for X, namely, R = XXT. Show the intermediate steps of calculating each element of the 2-by-2 matrix R. d) The matrix outer product can also be calculated via R =
a) The drawing of all data points on a 2D plane is illustrated below.
b) The angle in between the five other points is 27
c) The matrix outer product for X is R = XXT.
d) The matrix outer product can also be calculated via R is (2,27)
The data matrix X is a 2-by-7 matrix, where each column represents a data point with two components. We can visualize each data point as a vector in a two-dimensional plane, where the horizontal axis represents the first component and the vertical axis represents the second component.
To draw all data points on a 2D plane, we can plot each column of X as a vector starting from the origin. Proper labeling of the two axes and providing important tick values will facilitate a precise graphical description of the data.
Next, we can use the inner product formula to calculate the angle between the first data point (2, 27) and the other five data points, respectively.
The inner product, also known as the dot product, is a way to measure the similarity between two vectors by multiplying their corresponding components and summing the products.
To know more about matrix here
https://brainly.com/question/28180105
#SPJ4
Simplify without calculator: (-5) (7)+4×5 (Show all calculations)
Step-by-step explanation:
this is the answerrr
without calculator
1. A living room measures 4.75 m by 5.2 m. a. What is the area of the living room? 24.7m b. The area of the game room is one and a half times that of the living room. Fi the living room and the game room.
The area of the living room is 24.7 m², and the area of the game room is 37.05 m².
What is area?Area is the measure of the two-dimensional space occupied by a figure or an object. It is usually expressed in square units such as cm2, m2, or in2. It is used to measure the size of a figure or object, and can also be used to calculate the amount of material required for a project.
The area of a living room measuring 4.75 m by 5.2 m can be calculated using the formula A = l × w, where A is the area, l is the length and w is the width. In this case, A = 4.75 m × 5.2 m = 24.7 m².
To calculate the area of the game room, we must multiply the area of the living room by 1.5. Therefore, the area of the game room is 1.5 × 24.7 m² = 37.05 m².
The area of the living room is 24.7 m², and the area of the game room is 37.05 m².
The area of a room can be used to determine how much furniture can fit in the room or how much floor space is available for activities. Knowing the area of a room is also important for calculating the cost of painting, wallpapering, carpeting, and other flooring materials.
For more questions related to length
https://brainly.com/question/25292087
#SPJ1
Help please! Appreciate the help
For the given statements for domain and range, option 3 and option 4 are correct answers.
What is domain and range?The sets of all the x-coordinates and all the y-coordinates of ordered pairs, respectively, are the domain and range of a relation. With functions, we enter various numbers, and the output is a new set of numbers. The two essential characteristics of functions are domain and range. A function's domain and range are its constituent parts.
The domain of the function are all the input values while the range are the output values of the function for the given input.
In the given options, option 3 and 4 are correct as the functions have the same input but not the same output.
That is, they have the same domain, all real numbers, but not the same range.
Hence, for the given statements for domain and range, option 3 and option 4 are correct answers.
Learn more about domain and range here:
https://brainly.com/question/30133157
#SPJ1
Can someone actually see if I got this answer correct please
Instead of 2.00 as mentioned in the question, the semester GPA is 1.38. Please double-check your calculations or provide more details if you made an error when reporting your grades or computing your GPA.
How many credit hours are there in three?Students must devote approximately 135 hours (45 x 3) of class, instructional, and independent time to a three credit unit course. Students who enroll in a course for four credit hours must dedicate around 180 (45 x 4) hours to it, split between in-class and out-of-class work.
You must first translate each letter grade using the common 4.0 scale into its equivalent numerical number before you can determine your semester GPA:
A = 4.0
B = 3.0
C = 2.0
D = 1.0
F = 0.0
E = 0.0 (equivalent to F)
Then, you can use the formula:
(Total grade points) / GPA (total credit hours)
Using this formula, we can calculate your semester GPA as follows:
FYE 105: F (0.0) x 3 credit hours = 0.0 grade points
MAT 150: E (0.0) x 3 credit hours = 0.0 grade points
ENG 101: D (1.0) x 3 credit hours = 3.0 grade points
BIO 112: A (4.0) x 3 credit hours = 12.0 grade points
BIO 113: B (3.0) x 1 credit hour = 3.0 grade points
Total grade points = 0.0 + 0.0 + 3.0 + 12.0 + 3.0 = 18.0
Total credits earned is 13 (3 + 3 + 3 + 3 + 1)
GPA = 18.0 / 13 = 1.3846
To know more about semester GPA visit:-
https://brainly.com/question/13871451
#SPJ1
Letsha wants to produce 80 pages information books for school project. She can have this done at local printing company at R0.35 per page.
Answer:
if u want total price then,
=Rs.35×80=Rs.2800
Which operation do you use to simplify a ratio after finding the greatest common factor (GCF)?
division
addition
multiplication
subtraction
Answer:
hey baby
Step-by-step explanation:
hi thwrw honey i love you lol
The operation we use to simplify a ratio after finding the greatest common factor (GCF) is division.
Option A is the correct answer.
What is an expression?An expression contains one or more terms with addition, subtraction, multiplication, and division.
We always combine the like terms in an expression when we simplify.
We also keep all the like terms on one side of the expression if we are dealing with two sides of an expression.
Example:
1 + 3x + 4y = 7 is an expression.
3 + 4 is an expression.
2 x 4 + 6 x 7 – 9 is an expression.
33 + 77 – 88 is an expression.
We have,
To simplify a ratio after finding the greatest common factor (GCF), we use division.
We divide both terms of the ratio by the GCF.
This reduces the ratio to its simplest form.
Thus,
The operation we use to simplify a ratio after finding the greatest common factor (GCF) is division.
Learn more about expressions here:
https://brainly.com/question/3118662
#SPJ2
CAN SOMEONE PLEASE HELP thank you so so much please!!!
Step-by-step explanation:
try this option, all the details are in the attachment.
What is the smallest possible average of five distinct positive even integers?
A. 10
B. 8
C. 6
D. 4
E. 0
Answer:
The smallest possible average of five distinct positive even integers will occur if we choose the five smallest even integers. Since we want the integers to be distinct, we start with 2 and add the next four even integers:
2, 4, 6, 8, 10
The average of these five integers is:
(2 + 4 + 6 + 8 + 10) / 5 = 30 / 5 = 6
Therefore, the smallest possible average of five distinct positive even integers is 6, which is answer choice C.
Find the distance from Link to the Octorok so Link can attack
The distance from Link to the Octorok is 10.63 units.
How to find the distance?We know that the distance between two points (x₁, y₁) and (x₂, y₂) is given by the formula below:
distance = √( (x₂ - x₁)² + (y₂ - y₁)²)
Here we want to find the distance from Link to the Octorok so Link can attack, so we need to get the distance between the points (-4, -5) and (3, 3).
The distance will be:
distance = √( (3 + 4)² + (3 + 5)²)
distance = √( (7)² + (8)²)
distance = √113
distance = 10.63
The distance is 10.63 units.
Learn more about distance at:
https://brainly.com/question/7243416
#SPJ1
