A bus starts to move with the speed of 15m/s. Calculate the time taken by the bus to cover distance of 15000m.

Answer:

We know that for a pendulum of length L, the period  (time for a complete swing) is defined as:

T = 2*pi*√(L/g)

where:

pi = 3.14

L = length of the pendulum

g = gravitational acceleration = 9.8 m/s^2

Now, we can think on the swing as a pendulum, where the child is the mass of the pendulum.

Then the period is independent of:

The mass of the child

The initial angle

Where the restriction of not swing to high is because this model works for small angles, and when the swing is to high the problem becomes more complex.

Answer:

The force of gravitational attraction between them also decreas

Question:

What do you think will happen to the people in the airplane if their location is unknown?

My opinion:

I mean what are the circumstances? Is it just a rogue pilot that takes a random plane with all the passengers Hostage or is It bad whether an they lose connection to the airport? I Mean either way, If I was on a plane being held hostage, or the plane crashing, I Would be a in a panic type state of mind. I Would be worried about what will happen when the plane crashes, I would worry about my friends or family that is aboard the plane with me, I Would be scared for my life because I Don't know if i would make it out alive.

Also:

How would they know their location is unknown wouldn't the Pilot be the only one to know exactly where there with their navigating system, But then again there was this time I headed to Florida an They had mini tv's on the seats of each chair, where you could: Watch movies, listen to music, an Also see exactly where you are in the world. It was really amazing actually.

Answer:

10 pa

Explanation:

4kg* 10 (or 9.8m/s2) = 40

40N /4m2 =10

Answer:

Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

Answer:

20 m/ s

Explanation:

change in velocity = 4m/ s

[tex]acceleration = \frac{rate \: of \: change \: of \: velocity}{time} [/tex]

[tex]acc = \frac{4}{2} \\ = 2[/tex]

initial velocity = 0m/ s

[tex]2 = \frac{v - 0}{10} [/tex]

cross multiplying

[tex]20 = v[/tex]

so the velocity after 10s will be 20m/s

Answer:

the car’s final displacement is 60 m

Explanation:

Given;

initail velocity of the car, u = 0

acceleration of the car, a = 0.8 m/s²

time of motion, t = 10 s

The first displacement of the car:

[tex]x_1 = ut + \frac{1}{2} at^2\\\\x_1 = 0 + \frac{1}{2} (0.8)(10)^2\\\\x_1 = 40 \ m[/tex]

The second displacement of the car;

acceleration, a = 0.4 m/s²,   time of motion, t = 10 s

[tex]x_2 = ut + \frac{1}{2} at^2\\\\x_2 = 0 + \frac{1}{2} (0.4)(10)^2\\\\x_2 = 20 \ m[/tex]

The final displacement of the car;

x = x₁  +  x₂

x = 40 m  +  20 m

x = 60 m

Therefore, the car’s final displacement is 60 m

Answer:

1000.

Explanation:

Thousand more steps could be taken when the number of cells was  increased from 3 to 5 because in the data, the number of cells i.e. 5 was achieved on 1000 steps. According to the data, the number of cells i.e. 1 was achieved on 800 steps, the number of cells i.e. 5 was achieved on 1000 steps, the number of cells i.e. 2 was achieved on 600 steps, the number of cells i.e. 3 was achieved on 400 steps and the number of cells i.e. 4 was achieved on 200 steps. So we can say that 1000 steps are needed for the number of cells increased from 3 to 5.

Answer:

dependent: the outcome of the experience

independent variable: everything literaly.

Independent is where you change some variables and see the result

Dependent is literaly the result, or the outcome dependent on the exprience.

Explanation:

I got u.

Answer:

25 kg

Explanation:

Given,

Acceleration ( a ) = 2 m/s^2

Force ( F ) = 50 N

To find : Mass ( m ) = ?

Formula : -

F = ma

m = F / a

= 50 / 2

m = 25 kg

So, the mass of the body is 25 kg.

Answer:

C: the process by which stars create the heavier elements

Explanation:

Stellar nucleosynthesis is defined as the process of nuclear fusion by which heavier elements are formed within stars by from the combination of protons and neutrons gotten from the nuclei of lighter elements.

Looking at the options, the correct one is Option C

Answer:

(a) 3.93 m/s

(b) 861.66 m

Explanation:

A = 4.5 m/s  [27° S of W] for 3.0 minutes

B = 3.5 m/s [35° S of E] for 4.1 minutes

Distance A = 4.5 x 3 x 60 = 810  m

Distance B = 3.5 x 4.1 x 60 = 861 m

(a) The average speed is defined as the ratio of the total distance to the total time.

Total distance, d = 810 + 861 = 1671 m

total time, t = 3 + 4.1 = 7.1 minutes = 7.1 x 60 = 426 seconds

The average speed is

[tex]v=\frac{1671}{426}=3.93 m/s[/tex]

(b)

[tex]\overrightarrow{A} = 810(- cos 27 \widehat{i} - sin 27 \widehat{j})=- 721.7 \widehat{i} - 367.7 \widehat{j}\\\\\overrightarrow{B} = 861( cos 35 \widehat{i} - sin 35 \widehat{j})= 705.3 \widehat{i} - 493.8 \widehat{j}\\\\\overrightarrow{C} = (- 721.7 + 705.3) \widehat{i} - (367.7 + 493.8) \widehat{j} \\\\\overrightarrow{C}= - 16.4 \widehat{i} - 861.5 \widehat{j}[/tex]

The magnitude is

[tex]C =\sqrt{16.4^2+861.5^2} = 861.66 m[/tex]

Answer:

(n) alluvial fan sandbar

Explanation:

Answer:

F2 = 900 lbs

Explanation:

From pascal principle;

F1/A1 = F2/A2

Force on cylinder at left; F1 = 100 lbs

Diameter of cylinder at left; d1 = 2 inches

Diameter of cylinder at right; d2 = 6 inches

Formula for area of top of cylinder = πr²

Thus;

Area of top of left cylinder; A = π × 2² = 4π

Area of top of right cylinder; A = π × 6² = 36π

Thus;

100/4π = F2/36π

F2 = (36π × 100)/4π

F2 = 900 lbs

Answer:

i) a₁ = -g (sin θ + μ cos θ), x = v₀² / 2a₁

ii) W = mg L sin  θ ,  iii)     Wₙ = 0

iv)  W = - μ m g  L cos  θ x

Explanation:

With a drawing this exercise would be clearer, I understand that you have a block on a ramp and it is subjected to some force that makes it rise, for example the tension created by a descending block.

The movement is that when the system is released, the tension forces are greater than the friction and the component of the weight and therefore the block rises up the ramp

At some point the tension must become zero, when the hanging block reaches the ground, as the block has a velocity it rises with a negative acceleration to a point and stops where the friction force and the weight component would be in equilibrium along the way. along the plane

i) Let's use Newton's second law

the reference system is with the x axis parallel to the ramp

Axis y

      N - W cos θ = 0

X axis

      T - W sin θ - fr = ma

the friction force is

      fr = μ N

      fr = μ mg cos θ

we substitute

      T - m g sin sin θ - μ mg cos θ = m a

      a = T / m - g (sin θ + μ cos θ)

With this acceleration we can find the height that the block reaches, this implies that at some point the tension becomes zero, possibly when a hanging block reaches the floor.

      T = 0

       a₁ = -g (sin θ + μ cos θ)

       v² = v₀² - 2a1 x

       v = 0       at the highest point

       x = v₀² / 2a₁

ii) the work of the gravitational force is

       W = F .d

       W = mg sin  θ   L

iii) the work of the normal force

the force has 90º with respect to the displacement so cos 90 = 0

         Wₙ = 0

iv) friction force work

friction force always opposes displacement

         W = - fr d

         W = - μ m g cos  θ L

Answer: The uses of static electricity include:

--> photocopying machines

--> precipitators

The dangers of static electricity include:

--> sparks that can lead to explosion

--> Damage to electronic equipment

Explanation:

STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.

Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.

Applications( uses) of static electricity include:

--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.

--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.

The disadvantages (dangers) of static electricity include:

--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.

--> Damage to electronic equipment: this is due to components from electrostatic discharge.

Answer:

theory

Explanation:

took the quiz

Answer:

2.82 m/s²

Explanation:

[tex]v = u + at \\ 24 = 0 + a(8.5) \\ a = 2.82 \: ms {}^{ - 2} [/tex]

The acceleration of a motorcycle is 2.82 m/s^2.

Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.

Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration for all other motions.

Given that:

Initial velocity of the motor cycle: u = 0 m/s.

Final velocity of the motorcycle = 24 meter/second.

Time taken to reach this velocity = 8.5 second.

Hence, acceleration of the motor cycle = change in velocity/time interval

= ( final velocity - initial velocity)/time interval

= ( 24 m/s  - 0 m/s)/8.5 s

= 2.82 m/s^2.

Its acceleration is 2.82 m/s^2.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ2

Answer:

the statement is TRUE

Explanation:

Most lenses are made of glass that has a strong absorption below 400 nm,

Only special evaporation lenses are made of quartz and fused silica which has a high absorption below 200 nm.

therefore the statement is TRUE

Explanation:

Hey there!

Given;

Mass of one object (m1) = 250kg

Mass of another object (m2) = 400 kg

Distance (d) = 100 m

Gravitational constant (g) = 6.67*10^-11

Now;

[tex]f = \frac{g.m1.m2}{ {d}^{2} } [/tex]

Keep all values;

[tex]f = \frac{6.67 \times {10}^{ - 11} \times 250 \times 400}{ {(100)}^{2} } [/tex]

Simplify

[tex]f = \frac{6.67 \times {10}^{ - 11} {10}^{5} }{10000} [/tex]

[tex]f = \frac{6.67 \times {10}^{ - 6} }{10000} [/tex]

Therefore, gravitational force is 6.67*10^-10.

Hope it helps!

Answer:

Heavier than 2.2 pounds

Explanation:

Explanation:

when the distance between the 2 objects is halved, the gravitational force between the 2 objects is doubled. when the distance between the 2 objects is doubled then the gravitational force doubles.

Answer:

. The SI unit of volume is the cubic meter (m3), which is a derived unit.

Liter (L) is a special name for the cubic decimeter (dm3).

Answer:

Explanation:

The dart will go forward horizontally with velocity of 19 m/s. It will also fall downwards with initial velocity of zero and gravitational acceleration of 9.8 m/s².

Distance PQ covered by the dart can be calculated using the following formula.

s = ut + 1/2 at²

u is initial velocity , a is acceleration and t is time.

Putting the values

s = 0 + 1/2 x 9.8 x .19²

= .1769 m

= 17.69 cm.

Answer:

both answer is option C

Explanation:

tag me brainliest

Answer:

Time, t = 2 seconds

Explanation:

Given the following data;

Mass, m = 50 kg

Initial velocity, u = 0 m/s (since it's starting from rest).

Final velocity, v = 8 m/s

Force, F = 200 N

To find the time, we would use the following formula;

[tex] F = \frac {m(v - u)}{t} [/tex]

Making time, t the subject of formula, we have;

[tex] t = \frac {m(v - u)}{F} [/tex]

Substituting into the formula, we have;

[tex] t = \frac {50(8 - 0)}{200} [/tex]

[tex] t = \frac {50*(8)}{200} [/tex]

[tex] t = \frac {400}{200} [/tex]

Time, t = 2 seconds

Answer:

Part A

a)  F = -16x + 4,  b)  x = 0.25 m, c) STABLE

Explanation:

Part A

a) Potential energy and force are related

          F = [tex]- \frac{dU}{dx}[/tex]- dU / dx

          F = - (8 2x -4)

          F = -16x + 4

b) The object is in equilibrium when the forces are zero

          0 = -16x + 4

          x = 4/16

          x = 0.25 m

c) An equilibrium position is called stable if with a small change in position, the forces make it return to the initial position, in case the forces make it move away it is called unstable.

In this case there is only one equilibrium point

by changing the position a bit

           x ’= x + Δx

we substitute

          F ’= - 16 x’ + 4

          F ’= - 16 (x + Δx) + 4

          F ’= (-16x +4) - 16 Δx

at equilibrium position F = 0

          F ’= 0 - 16 Δx

we can see that the body returns to the equilibrium position, therefore it is STABLE

PART B

This is an exercise in body collisions, let's define the system formed by the two bodies in such a way that the forces during the collisions are internal and the moment is conserved

initial instant. Before the shock

        p₀ = m v

final instant. After the crash

        p_f = (m + M) v_f

We have two possibilities: an elastic collision in which the bodies separate, each one maintaining its plus, and an INELASTIC collision where the neutron is absorbed by the nucleus and the final mass is M '= m + M, in this case they indicate that the collision is elastic

          p₀ = pf

          mv = mv ’+ M v_f

in the case of the elastic collision, the kinetic energy is conserved

        K₀ = K_f

        ½ m v² = ½ m v’² + ½ M v_f²

we write the system of equations

        mv = mv ’+ M v_f (1)

         m (v² -v'²) = M v_f ²

         m (v - v ’) = M v_f

         m (v-v ’) (v + v’) = M v_f

        v + v ’= v_f

we substitute in equation 1 and solve

         v ’=[tex]\frac{m -M }{m+M } \ vo[/tex]

         v_f = [tex]\frac{2m}{m+M} \ v_o[/tex]

the mechanical energy of the neutron is

  initial

          Em₀ = K = ½ m v²

final moment

          Em_f = K + U = ½ m v_f ² + U

U is the energy lost in the collision

total energy is conserved

          Em₀ = Em_f

          ½ m v² = ½ m v_f ² + U

         U = ½ m (v² -v_f ²)

         U = ½ m [v² - ( [tex]\frac{m-M}{m+M}[/tex]  v)² ]

       U = ½ m v² [1- ( [tex]\frac{m-M}{m+M}[/tex] )² ]

       U = ½ m v2 [ [tex]\frac{2M}{m+M}[/tex]]

       U = [tex]\frac{2 mM}{m +M } \ v^2[/tex]

Let's do the same calculations for the nucleus

initial     Em₀ = 0

final        Em_f = K + U = ½ M v_f ² + U

            Em₀ = Em_f

            0 = K + U

            U = -K

            U = - ½ M v_f ²

            U = - ½ M [ [tex]\frac{2m}{m+M} \ v[/tex] ]²

            U = [tex]\frac{2 m M }{m+M} \ v^2[/tex]  

We can see that we obtain the same result, that is, the potential energy lost by the neutron is equal to the potential energy gained by the nucleus.

b) the fraction of energy lost

          f = U / Em₀

          f = 4 m M / m + M        

c) let's calculate the fraction of energy lost in a collision

          m = 1.67 10⁻²⁷ kg

          M = 12 1.67 10⁻²⁷= 20 10⁻²⁷ kg

         f = 4 1.6 20 / (1.6+ 20)    10⁻²⁷

         f = 5.92 10⁻²⁷ J

the energy of a fast neutron is greater than 1 eV

         Eo = 1 eV (1.67 10⁻¹⁹ J / 1eV) = 1.67 10⁻¹⁹ J

Let's use a direct portion rule if in a collision f loses in how many collisions it loses 0.95Eo

         #_collisions = 0.95 Eo / f

         #_collisions = 0.95 1.67 10⁻¹⁹ / 5.92 10⁻²⁷

         #_collisions = 2.7 10⁷ collisions

Answer:

I = sum m *r^2    where m represents the (small) individual masses and r is the distance of that mass from center of rotation

Note:  sum m = M

For the hoop given all masses are at a distance RRR from the center of rotation

I = MMM * RRR^2