Using 1st equation of kinematics
[tex]\\ \bull\sf\longmapsto v=u+at[/tex]
[tex]\\ \bull\sf\longmapsto v=0+0.25(180)[/tex]
[tex]\\ \bull\sf\longmapsto v=45m/s[/tex]
⇛Initial velocity (u) = 0 m/s
⇛Acceleration (a) = 0.25 m/s²
⇛Time (t) = 3 minutes
⇛Final velocity (v) = v
Converting 3 minutes into seconds
1 minute = 60 second3 minutes = 60 × 33 minutes = 180 Seconds☛ Using 1st equation of motion[tex] \Large\begin{gathered} {\underline{\boxed{ \rm {\red{v \: = \: u \: + \: at}}}}}\end{gathered}[/tex]
☛ Substuting the values[tex] \bf \large \longrightarrow \: \: v \: = \: 0 \: + \: 0.25 \: \: (180)[/tex]
[tex]\bf \large \longrightarrow \: \: v \: = \:45 \: m/s[/tex]
what is the relation between centre of gravity and stability
Explanation:
tilting it will raise the height of its center of gravity.
blocks x and y are attached to each other by a light rope and can slide along a horizontal surface. Mass of block x is 10 kg and that of block y is 5 kg. the magnitude of force of friction on blocks x and y is 8.0 N and 4.0N respectively. Find the action-reaction forces that the blocks exert on each other if an applied force of 40 N(right) acts on block per illustration below.
Blocks x and y exerts action-reaction forces on each other with 146.1 N and 53.1 N respectively.
The given parameters:
mass of block x = 10 kg
mass of block y = 5 kg
magnitude of the frictional force of block x = 8 N
magnitude of the frictional force of block y = 4 N
the applied force to the right = 40 N
To find:
the action-reaction forces that the blocks exert on each otherThe block y pulls block x to the left with the following reaction forces;
Force of block y = force due to its own weight + frictional force
Reaction Force of block y = mg + 4 Nwhere;
g is the acceleration due to gravity = 9.81 m/s²
Reaction Force of block y = (5 x 9.81) + 4Reaction Force of block y = 49.1 + 4Reaction Force of block y = 53.1 NThus, block y reacts on block x with a force of 53.1 N
The block x acts on block y towards the right direction with following forces;
Force of block x on y = force due to its own weight + frictional force + applied force to the right
Force of block x on y = (mg) + (8 N) + (40 N)Force of block x on y = (10 x 9.81) + (48)Force of block x on y = 98.1 + 48Force of block x on y = 146.1 NThus, block x acts on block y with a force of 146.1 N
Learn more here: https://brainly.com/question/20709953
if the velocity of a train starts from rest is 72km/h(20m/s) after 5 minutes, find out its acceleration and the distance travelled by the train in this time
Explanation:
Convert the time to seconds : 5minutes × 60 = 300seconds
Acceleration = Velocity / Time
Acceleration = 20m/s / 300s
Acceleration = 0.067m/s²
Distance = Velocity × Time
Distance = 20m/s × 300seconds
Distance = 6000m
A 15.0 cm object is 12.0 cm from a convex mirror that has a focal length of -6.0 cm. What is the height of the image produced by the mirror?
• -5.0 cm
• 7.5 cm
• -7.5 cm
• 5.0 cm
Answer:
5.0cm
Explanation:
To get the height of the image, we will use the magnification formula as shown:
m = Hi/H = v/u
Hi is the image height
H is the object height
v is the image distance
u is the object distance
First, we need to get the image distance v
Using the mirror formula;
1/f = 1/v+ 1/u
1/-6 = 1/v + 1/12
1/v = -1/12 - 1/6
1/v = -1-2/12
1/v = -3/12
v = 12/-3cm
v = -4cm
Next is to get the image height Hi
Using the expression;
Hi/H = v/u
Hi/15 = 4/12
Hi/15 = 1/3
3Hi = 15
Hi = 15/3
Hi = 5.0cm
Hence the image height is 5.0cm
Answer:
D. 5.0 cm
Explanation:
got it correct on the test
: 1 khối khi lý tưởng nhận được nhiệt lượng 200J, khi đó khí nở ra đẩy pittong bằng 1 công 80J.
Vậy nội năng Của khí là bao nhiêu
Answer:
DU = 120 Joules
Explanation:
Given the following data;
Quantity of energy = 200 J
Work = 80 J
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.
Q is the quantity of energy.
W is the work done.
Substituting into the formula, we have;
DU = 200 - 80
DU = 120 Joules
Please help me. I need this in a few hours.
Answer:
A) The population of prey is greater than that of predator
Even though you praise your dog for sitting inside on his bed and chewing the bone you gave him, your dog insists on going outside and burying his bone. This is MOST likely an example of:
Answer:
dog
Explanation:
When n resistance each of value x are connected parallel then resultant resistance x. When these n resistor connected in series. Total resistance
Answer:
Explanation:
Suppose you have 3 resistors each with a value of 3. If you placed them in parallel, would you get 3
1/3 + 1/3 + 1/3 = 1/r
The denominator doesn't change. So add the numerators.
(1 + 1 + 1)/3 = 3/3 = 1
So the question is faulty.
1 = 1/r
1*r = 1
r = 1/1
r = 1
A horse is running on a circular path with constant speed but its direction is changing at every point. It is
Answer:
accelerating.
Explanation:
A horse is running on a circular path with constant speed but its direction is changing at every point. Thus, it is accelerating.
What is 98.907 rounded to 1 significant figure?
The answer to the digits rounded to one significant figure is 100.
Significant figures are the most important figures in a number of digits.
The closer a digit is to the beginning of a number, the more important or significant it is.
But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:
If the next number is 5 or more, we round up.If the next number is 4 or less, we do not round up.From the numbers 98.907, 9 is the most significant digit followed by 8.
8 is greater than 5 so we should round up by adding one to 9 making the number 100.
learn more here:
https://brainly.com/question/11566364
The coefficient of kinetic friction between an 100-kg desk and the wood floor is 0.4. What force (in Newtons) must be applied to move the desk at a constant speed? help now
Assuming the applied force is exerted parallel to the floor, by Newton's second law both the net vertical and net horizontal forces would be zero:
∑ F (horizontal) = p - f = 0 … … … because the desk is pushed at a constant speed
∑ F (vertical) = n - mg = 0 … … … because the desk doesn't move up or down
where p is the magnitude of the applied force, f is the mag. of kinetic friction, n is the mag. of the normal force due to contact between the floor and desk, and mg is the weight of the desk. We have
n = mg = (100 kg) g = 980 N
and the mag. of friction is proportional to n according to
f = 0.4 n = 392 N
Then the applied force p has magnitude
p = f = 392 N
the velocity of a body is increases from 10 m/s ti 15 m/s in 5seconds calculate its acceleration
Answer:
acceleration = v-u/ t
= 15-10/5
= 5/5
= 1 m/s2
Explanation:
hope this helped you.
Answer:
[tex]\boxed {\boxed {\sf 1 \ m/s^2}}[/tex]
Explanation:
Acceleration is the change in velocity over the change in time. Therefore, the formula for calculating acceleration is:
[tex]a= \frac{v_f-v_i}{t}[/tex]
Since the body's velocity increased from 10 meters per second to 15 meters per second 15 m/s is the final velocity and 10 m/s is the initial velocity. The time is 5 seconds.
[tex]v_f[/tex]= 15 m/s [tex]v_i[/tex]= 10 m/s t= 5 s[tex]a= \frac{ 15 \ m/s - 10 \ m/s}{5 \ s}[/tex]
Solve the numerator.
15 m/s - 10 m/s = 5 m/s[tex]a= \frac{ 5 \ m/s }{5 \ s}[/tex]
Divide.
[tex]a= 1 \ m/s/s[/tex]
[tex]a= 1 m/s^2[/tex]
The acceleration is 1 meter per second squared.
maize is a monocotyledonous seed and pea is a dicotyledonous seed why? give short and the suitable answer I will mark you as a brainelist
Answer:
A dicot is a flowering plant that has one seed leaves. The monocot plants have a single cotyledon. Maize only has one cotyledon in their seed, so it's a monocot. Seeds having two Cotyles are mainly called a Dicot. A pea is a dicotyledonous plant, the seed (the pea itself) has two halves, cotyledons, hence dicot being 2.
Explanation:
One or more of the cotyledons are the first to appear from a germinating seed. Based on the number of cotyledons, botanists classify flowering plants (angiosperms) into :
a) plants with one embryonic leaf, termed monocotyledonous (monocots).
b) plants with two embryonic leaves, termed dicotyledonous (dicots).
Helpful Link:
https://www.vedantu.com/question-answer/in-pea-caster-and-maize-the-number-of-cotyledons-class-11-biology-cbse-5f626a17e5bde9062ff6d2a3
Calculate the force of gravitation between two objects of masses 50 kg and 120 kg respectively, kept at a distance of 10 m from one another.
Answer:
Answer
F=G×
d
2
m×M
m = 50 kg
M = 120 kg
Distance, d = 10 m
G=6.7×10
−11
Nm
2
/kg
2
F=6.67×10
−11
×
10
2
50×120
F=6.67×60×10
−11
F=4.02×10
9
N
Answer:
=4.002×10-⁷
Explanation:
(6.67×10-¹¹ ×50×120)/10²
=4.002×10-⁷
there is a dropping of a coconut of 2kg mass. the speed of the coconut at the moment before it hits the ground is 40m s-1.
calculate the kinetic energy of the coconut at the moment.
We know
[tex]\boxed{\sf K.E=\dfrac{1}{2}mv^2}[/tex]
m denotes to mass v denotes to velocity[tex]\\ \sf\longmapsto K.E=\dfrac{1}{2}\times 2\times 40^2[/tex]
[tex]\\ \sf\longmapsto K.E=40^2[/tex]
[tex]\\ \sf\longmapsto K.E=1600J[/tex]
Define SI units. Also mention their importance. SI unit The
Answer:
SI unit is an internationally accepted system and have the same value all over the world .
I don't know the importance sotry
Answer:
SI unit is an internationally accepted system that have same value all over the world.
what is the role of the communicator in a dc generator?
A) it keeps the electric current flowing in one direction
B) it keeps the magnetic fields of the permanent magnet steady
C) it causes the magnetic fields of the permanent magnets to reverse
D) it causes the electric current to constantly reverse its direction
Answer:
C
Explanation:
Answer:
A)
Explanation:
it keeps the electric current flowing in one direction
help me with this one
Answer:
may be d)45°
Explanation:
what is measurement?
Answer:
The comparison of unknown quantity with known quantity is called measurement
Answer:
the size, length or amount of something is a measurement.
Explanation:
Measurements help in daily life and are important to development, accuracy and making decisions.
The rate of chage of displacement is called __________
Answer:
Velocity is the rate of change of displacement.
for minimum deviation inside the prism the angle of emergence should be equal to
Answer:
Originally Answered: Why should angle of incidence be equal to angle of refraction for minimum deviation in a triangular glass prism? The angle of incidence is equal to angle of refraction only if the angle od deviation is 0.
Explanation:
not sure but
Don't Forget To Follow, Brainliest, And Give Me Heart :)
the gravitational force between two masses at distance of 2.5×10^6 metre is 250 Newton . what should be distance between them to reduce the gravitational force by half?
Answer:
distance between should be 1.25 × 10^6 m
Explanation:
Force is proportional to separation distance.
[tex]250 \: newtons = 2.5 \times {10}^{6} \: metres \\ ( \frac{1}{2} \times 250) \: newtons = d \\ \\ d = \frac{125 \times 2.5 \times {10}^{6} }{250} \\ d = 1.25 \times {10}^{6} \: metres[/tex]
Answer:
distance between should be 1.25×10^6.
Explanation:
force Is proportional to separation .
mrk above answer branilest .
The unit of work in terms of Newton and metre is _______
Answer:
Joule
Explanation:
the unit of work is Joule determined by the letter J.
Answer:
JouleExplanation:
Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.
define simple machine
Answer:
simple machine, any of several devices with few or no moving parts that are used to modify motion and the magnitude of a force in order to perform work. ... The simple machines are the inclined plane, lever, wedge, wheel and axle, pulley, and screw.
State the relative position for the sun and earth during the lunar eclipse (ASAP)
Answer:
Solar eclipses result from the Moon blocking the Sun relative to the Earth; thus Earth, Moon and Sun all lie on a line. Lunar eclipses work the same way in a different order: Moon, Earth and Sun all on a line. In this case the Earth's shadow hides the Moon from view.
The capacity of an RD bottle is 100 cc and its mass is 45 g. Find the mass of the bottle when it is filled with a liquid of density 600 kg/m3.
Answer:
The capacity of an RD bottle is 100cc and its mass is 45g. Find the mass of the bottle when it is filled with a liquid of density 600kg/[tex]m^{3}[/tex]
EXPLANATION:
100cc=100[tex]cm^{3}[/tex]
density of liquid=600Kg/ =0.6gm/
so mass of 100cc liquid will be m=d×V=0.6×100=60gm
So mass of bottle filled with liquid will be bottle+liquid=45gm+60gm=105gm
Answer is 105gm.
An astronaut is said to be weightlessness when he\she travels in a satellite. Does it mean that the earth does not attract him\her?
Answer:
Explanation:
The sense of weightlessness in orbiting satellite is because of the lack of any contact-forces. ... Thus, both the astronaut and the satellite have the same value of g, which is again equal to the centripetal acceleration of the satellite. These two neutralize each other, causing everything to appear weightless.
MAKE ME BRAINLIEST
For Gerald the Human Cannonball, the gunpowder transforms and gives Gerald what type of energy?
Explanation:
The explosives changes Gerald the Human Cannonball and provides him with chemical energy.
Sulfur and carbon serve as fuels, whereas saltpetre serves as an oxidant. Gunpowder has long been employed as a propellant in weapons, artillery, rocketry, and fireworks, as well as a blasting ingredient in quarrying, mine, and road construction.
can ya pls answer dis rq!
Answer:
I don't even know can u tell me how to ask questions
010) Identify the true statement. Group of answer choices The height of waves is determined by wind strength and fetch. Wave base is the lowest sea surface elevation attained during the passage of a wave. Waves have no effect on the seafloor near the shoreline. Waves speed up as they enter shallower water.'
Answer:
The height of the wave is determined by the wind strength and fetch.
Explanation:
The height of the wave is determined by the wind strength and fetch.
The more the strength and the more the fetch size the more will be the height of the wave.
Remember as the wave approaches the coast its wavelength decreases and the wave height increases, whereas when the wave goes away from the coast its wavelength increases and height decreases.
