Answer:
the value
Explanation:
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
What can a nation do to improve the exchange rate of its currency?
A.
try to improve its balance of trade
B.
try to decrease its trade surplus
C.
try to lower its gross domestic product (GDP)
D.
try to export less while importing more
Answer:
A
Explanation:
balance the trades and improving them
Answer:
A:try to improve it's balance of trade
Explanation:
This graph represents a population of molecules in a gas versus the distribution of the average velocity(speed) of its molecules in that population. Assume all molecules to be of the same mass. In reading the graph, it is important to note three things. One, is the most probable speed is at the peak of the curve. Secondly, the most probable speed increases as the temperature increases (so shift to the right), and the distribution broadens as it increases.
On the graph, indicate the average kinetic energy of the population.
Explain your answer.
What part of the graph indicates the temperature of the sample?
Explain your answer.
Sketch a curve that represents the distribution of molecules at a temperature below the one shown. Label it as T2. Describe both T and T2 in terms of their average kinetic energy. Be specific and detailed.
Submit your answer below.
Answer:
Part A
Given that the graph is symmetrical and bell shaped, the average kinetic energy is given by the midline of graph, which corresponds to the common speed of the highest number of the population
Part B
The formula for the average kinetic energy, K.E. = (3/2)·(R/NA)·T
Therefore, the part of the graph that indicates the temperature of the sample is the average kinetic energy. K.E.
Part C
At a lower temperature, the heat is less evenly distributed and we have the distribution T2 higher than T1
Please see the attached graph created with MS Visio
Explanation:
How many moles are in 2.11 x 1014 molecules of LiBr?
Answer: There are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.
Hence, moles in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr are calculated as follows.
[tex]Moles = \frac{2.11 \times 10^{14}}{6.022 \times 10^{23}}\\= 12.71 \times 10^{-9}[/tex]
Thus, we can conclude that there are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
A doctor is testing a new medication and he doesn’t tell the people in the study about the possible side effects of the medicine. He is _____.
Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding
Answer:
d
Explanation:
Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!
The radius of the large cylinder of a hydrolic press
20cm and that of the small cylinderis 5 cm. If a force of 100N is applied on the small piston Calculate the force on the large piston. if the piston of the small cylinder move through a distance of 0.4m through what distance can the large piston be raised
Answer: 1) 400N
2)1.6
Explanation:
1) 5cm = 100N of force
so
20cm=400n
2) 0.4 X 4 = 1.6
Which of the following represents an element ? H2O H2 NaCl CaCO3
Answer:
H₂
Explanation:
H₂ is hydrogen in its elemental form.
H₂O, NaCl, and CaCO₃ are all examples of elements added together to create compounds.
Which has more molecules in it 10g H, 0 or 10g NaCl*
A)010g of H0
B)10g of NaCl
C)They have the same number of molecules
D)Cannot be determined
Answer:
10 grams of hydrogen
Explanation:
Describe two situations in which you observed or performed an energy transformation. For each situation, name the starting form of energy and an ending form of energy.
Answer:
The Sun transforms nuclear energy into heat and light energy.
Our bodies converting chemical energy in our food into mechanical energy for us to be able to move.
An electric fan transforming electrical energy into kinetic energy.
Fill in the coefficients that will balance the following reaction:
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
How would the balloons interaction with each other change if the balloons were moved further apart? Explain.
Explanation:
It is known that like charges repel each other and unlike charges attract each other.
As the balloons are facing each other with like charges so they will repel each other. Hence, they will move apart.
But when balloons were moved further apart then interaction between them will decrease and then there will be no force of repulsion or force of attraction.
Why increasing the temperature of a gas would increase the volume of its container in gas law?
When the amount of gas in a container is increased, the volume increases. Lussac's law states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.
Which of these takes place when a chemical change occurs? option 1: Bonds connecting atoms in products and reactants form. option 2: Bonds connecting atoms in products and reactants break. option 3: Bonds connecting atoms in reactants break, and bonds connecting atoms in products form. option 4: Bonds connecting atoms in reactants form, and bonds connecting atoms in products break.
Answer: Out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explanation:
A change that leads to the change in chemical composition of a substance is called a chemical change.
For example, [tex]2NH_{3} \rightarrow N_{2} + 3H_{2}[/tex]
Here, bond between the reactant atoms nitrogen and hydrogen is broken down.
On the other hand, bond connecting the products that is [tex]N_{2}[/tex] and [tex]H_{2}[/tex] is formed.
Thus,, we can conclude that out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explain why the buffering action of these chemical reactions is limited by the present day rate of change for atmospheric CO2 concentration
Answer:
Due to increase in carbondioxide gas.
Explanation:
The buffering action of these chemical reactions is limited by the present day rate of change for atmospheric carbondioxide concentration because the the rate of atmospheric carbondioxide rises as compared to ancient atmospheric carbondioxide gas. Due to increase of human activities, the concentration of carbondioxide gas increases in the atmosphere which limits the buffering action of these chemical reactions so we can say that carbondioxide gas is responsible for its limited action.
How or why does lead affect bones and teeth?
Answer:
Lead can harm production of blood cells and the absorption of calcium needed for strong bones and teeth, muscle movements, and the work of nerves and blood vessels. High lead levels can cause brain and kidney damage.
thanks
Once lead enters the body, it is distributed to organs such as the brain, kidneys, liver and bones. The body stores lead in the teeth and bones where it accumulates over time. Lead stored in bone may be remobilized into the blood during pregnancy, thus exposing the fetus.
A gas fills up a container that has 2.5L has a pressure of 3.5 atm. If the gas gets transferred to a container that holds 4L, what would the new pressure be?
If the pressure of a 2.00 L sample of gas is 50.0 kPa, what pressure does the gas exert if its volume is decreased to 20.0 mL?
Which equation should you use?
__________________________________________________________
Which equation should you use?
B. P₁V₁=P₂V₂
What is the new pressure?
✔ 5000 kPa
__________________________________________________________
Explanation:The problem gives initial volume (2.00 L), final volume (20.0 mL), and initial pressure (50.0 kPa). Then it asks to find the final pressure. Answer B has all these variables, with P₁=initial pressure, P₂=final pressure, V₁=initial volume, and V₂=final volume. Plug the given values into the equation and then solve for the unknown value, which is P₂, final pressure.
When plugging in the values, use consistent units. 2L=2000 mL, I chose to make the consistent unit in mL. You'll get the same answer if you choose to use L as the consistent unit.
[tex]2000*50=20*P2[/tex]
[tex]100000=20*P2[/tex]
Divide both sides by 20
[tex]100000/20=(20*P2)/20[/tex]
[tex]5000=P2[/tex]
Here's a photo of Edge just incase.
explain how ships made of steel float on water
Answer:
The air that is inside a ship is much less dense than water. That's what keeps it floating
Considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
compare with the temperature at the end of the change?
Answer:
The temperature on the graph is higher at point 5 than at point 1. The correct answer is the last answer choice that you showed.
Explanation:
The temperature at point 1 is -10 degrees Celsius, while the temperature at point 5 is 120 degrees Celsius. This is a 1300% increase.
See the calculation here: https://www.calculatorsoup.com/calculators/algebra/percent-change-calculator.php?v_1=-10&v_2=120&action=solve
I hope this helps.
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
What is a natural disaster?
Answer:
Explanation:
A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes
Answer:
A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.
Witch part of an atom is mostly empty space?
The photograph below shows the East African Rift Valley in Africa. Which tectonic movement
of Earth’s crust is most likely responsible for this feature?
Answer:
divergence of continental crust
Explanation:
the correct sequence where reactivity towards oxygen increases.
Answer:
Option D is good to go!
Explanation: as per the reactivity series more reactive substances will react with the counterpart substance.The most reactive substance here is calcium while the least reactive is aluminium, the magnesium comes in between.As per their reactivity, these substances will react with oxygen.
Explanation:
23. What type of chemical reaction is: CH, + 0→ CO2 + H20
a. Combustion
b. Neutralization
C. Synthesis
d. Double Replacement
Answer:
combustion
Explanation:
bsnszisb idiej jeiieyv
_______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
Struggling on this problem.
Answer:
4Al + 3O2 ----> 2Al2O3
Explanation:
first blank 4
second blank 3
third blank 2
