A charge -5.5 nC is placed at (-3.1.-3) m and another charge 9.3 nC is placed at (-2,3,-2) m. What is the electric field at (1,0,0)m?

The time constant (in ms) of the RC circuit is 3.75 ms. Hence, the correct option is  (d) 3.75 ms.

The rate of decay of the current in a charging capacitor is proportional to the current in the circuit at that time. Therefore, it takes longer for a larger current to decay than for a smaller current to decay in a charging capacitor.A capacitor is discharged through a 20.0 Ω resistor.

The discharge current decreases to 22.0% of its initial value in 1.50 ms. We can obtain the time constant of the RC circuit using the following formula:$$I=I_{o} e^{-t / \tau}$$Where, I = instantaneous current Io = initial current t = time constant R = resistance of the circuit C = capacitance of the circuit

To know more about circuit visit:-

https://brainly.com/question/12608516

#SPJ11

The time constant of the RC circuit is approximately 0.674 m s.

To determine the time constant (τ) of an RC circuit, we can use the formula:

τ = RC

Given that the discharge current decreases to 22.0% of its initial value in 1.50 m s, we can calculate the time constant as follows:

The percentage of the initial current remaining after time t is given by the equation:

I(t) =[tex]I_oe^{(-t/\tau)[/tex]

Where:

I(t) = current at time t

I₀ = initial current

e = Euler's number (approximately 2.71828)

t = time

τ = time constant

We are given that the discharge current decreases to 22.0% of its initial value. Therefore, we can set up the following equation:

0.22 =[tex]e^{(-1.50/\tau)[/tex]

To solve for τ, we can take the natural logarithm (ln) of both sides:

ln(0.22) = [tex]\frac{-1.50}{\tau}[/tex]

Rearranging the equation to solve for τ:

τ = [tex]\frac{-1.50 }{ ln(0.22)}[/tex]

Calculating this expression:

τ ≈ 0.674 m s

Learn more about time constant here:

brainly.com/question/32577767

#SPJ11

A 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s will give Hall voltage of 2.3712 mV.

For calculating this, we know that:

VH = B * d * v * RH

In this instance, the blood flow rate is given as 59.0 cm/s, the magnetic field strength is given as 0.160 T, the aorta diameter is given as 2.60 cm (which we will convert to metres, thus d = 0.026 m), and the magnetic field strength is given as 0.160 T.

Let's assume a value of RH = [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = (0.160 T) * (0.026 m) * (0.59 m/s) *  [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = 0.0023712 V

Or,

VH = 2.3712 mV

Thus, the Hall voltage produced in the aorta is approximately 2.3712 mV.

For more details regarding Hall voltage, visit:

https://brainly.com/question/32048582

#SPJ4

The value below that has 3 significant digits is: c) 58 counts

In this value, the digits "5" and "8" are considered significant, and the trailing zero does not contribute to the significant figures. The value "58" has two significant digits.

Q13: The correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000 is:

b) 40.90(12) counts/sec

The value has 4 significant digits, and the uncertainty is indicated by the value in parentheses. The uncertainty is determined by the count rate's precision and the dead time effect.

Q14: The detectors that have the risk of a wall effect are:

c) Neutron semiconductor detectors

d) Gamma semiconductor detectors

The wall effect refers to the phenomenon where radiation interactions occur near the surface of a detector, leading to reduced sensitivity and accuracy. In the case of neutron and gamma semiconductor detectors, their thin semiconductor material can cause a significant portion of radiation interactions to occur close to the detector surface, resulting in the wall effect.

To know more about digits, visit

https://brainly.com/question/24491627

#SPJ11

The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.

The highest order dark fringe, n can be determined using the equation:

n λ = a sin θ

where,λ = 629 nma = 1480 nm

Given data:

wavelength (λ) = 629 nmsingle slit width (a) = 1480 nm

The highest order dark fringe, n can be determined using the equation:n λ = a sin θThe first dark fringe corresponds to n = 1, second dark fringe corresponds to n = 2, and so on.

For the highest order dark fringe, we need to find the largest value of n which gives a valid value of

sin θ.n λ = a sin θ ⇒ sin θ = (n λ) / a

For the highest order dark fringe, sin θ = 1 which gives:

n λ = a sin θ⇒ n λ = a⇒ n = a / λ

We have,a = 1480 nmλ = 629 nm

Substituting the values in the equation, we get:

n = a / λ= 1480 nm / 629 nm= 2.35 or 2 (approx)Therefore, the highest order dark fringe, n is approximately equal to 2

The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.

To know more about dark fringe, visit:

https://brainly.com/question/31576174

#SPJ11

A solid surface with dimensions 2.5 mm ✕ 3.0 mm is exposed to argon gas at 90. Pa and 500 K, the Ar atoms make 4.6128 collisions with the surface in 20 seconds.

We may utilise the idea of the kinetic theory of gases to determine how many collisions the Ar (argon) atoms have with the solid surface.

The expression for the quantity of surface collisions per unit of time is:

Collisions per unit time = (Number of particles per unit volume) × (Velocity) × (Area of the surface)

Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)

Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)

= (90) / (8.314 * 500 K)

= 0.02154 [tex]mol/m^3[/tex]

Number of particles in the given volume = (Number of particles per unit volume) × (Volume)

= (0.02154) × (7.5 × [tex]10^{(-6)[/tex])

= 1.6155 × [tex]10^{(-7)[/tex] mol (approximately)

Number of collisions = (Number of particles in the given volume) × (Collisions per unit time) × (Time)

= (1.6155 × [tex]10^{(-7)[/tex]) × (Number of particles per unit volume) × (Velocity) × (Area of the surface) × (Time)

Velocity = √((3 * k_B * T) / M_Ar)

Velocity = √((3 * 1.380649 × [tex]10^{(-23)[/tex] J/K * 500) / (39.95 × [tex]10^{(-3)[/tex] )

≈ 1,558.45 m/s

Number of collisions = (1.6155 × [tex]10^{(-7)[/tex]) × (0.02154) × (1,558.45 m/s) × (7.5 × [tex]10^{(-6)[/tex]) × (20)

≈ 4.6128 collisions

Therefore, the Ar atoms make approximately 4.6128 collisions with the surface in 20 seconds.

For more details regarding collisions, visit:

https://brainly.com/question/13138178

#SPJ4

(a) The hottest type O star is approximately 6.90 times hotter than our Sun.

(b) Our Sun is approximately 2.42 times hotter than the coolest type M star.

Part (a) To determine how many times hotter the hottest type O star is compared to our Sun, we can calculate the temperature ratio as follows:

Temperature ratio = Temperature of the type O star / Temperature of our Sun

                = 40,000 K / 5,800 K

                ≈ 6.90

Therefore, the hottest type O star is approximately 6.90 times hotter than our Sun.

Part (b) To determine how many times hotter our Sun is compared to the coolest type M star, we can calculate the temperature ratio as follows:

Temperature ratio = Temperature of our Sun / Temperature of the type M star

                = 5,800 K / 2,400 K

                ≈ 2.42

Therefore, our Sun is approximately 2.42 times hotter than the coolest type M star.

Learn more about hottest type

brainly.com/question/30049280

#SPJ11

In an inelastic collision, two or more objects stick together and travel as one unit after the collision. The principle of conservation of momentum states that the total momentum of a closed system remains constant if no external forces act on the system, which is also true for an inelastic collision.

As a result, the momentum of the first cart is equal to the combined momentum of the two carts after the collision, since the collision is inelastic. The velocity of the two carts after the collision can be calculated using the conservation of momentum, as follows:0.400 kg x 0.22 m/s + 0 kg x 0 m/s = (0.400 kg + 0 kg) x 0.16 m/s0.088 Ns = 0.064 NsThe total momentum of the system is 0.064 Ns.

The two carts move together after the collision with a velocity of 0.16 m/s. The mass of the second cart is 0 kg, therefore, its initial momentum is 0 Ns. The momentum of the first cart is therefore equal to the total momentum of the system.

The initial momentum of the first cart can be calculated using the following formula:p = mv0.088 Ns = 0.400 kg x v Therefore, the initial velocity of the first cart is:v = p/mv = 0.088 Ns / 0.400 kgv = 0.22 m/s Hence, the initial velocity of the first cart is 0.22 m/s.

To know more about inelastic collision refer here:

https://brainly.com/question/14521843#
#SPJ11

The maximum speed of the object is Umas =  1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x =  6.97 cm..

To find the maximum speed of the object, we can use the concept of mechanical energy conservation. At the maximum speed, all the potential energy stored in the spring is converted into kinetic energy.

The potential energy stored in the spring is given by:

Potential energy (PE) = (1/2)kx²

Where:

k = force constant of the spring = 95.0 N/m

x = displacement of the object from equilibrium = 7.00 cm = 0.0700 m (converted to meters)

Substituting the values into the equation:

PE = (1/2)(95.0 N/m)(0.0700 m)²

PE ≈ 0.230 Joules

At the maximum speed, all the potential energy is converted into kinetic energy:

Kinetic energy (KE) = 0.230 Joules

The kinetic energy is given by:

KE = (1/2)mv²

Where:

m = mass of the object = 0.200 kg

v = maximum speed of the object (Umas)

Substituting the values into the equation:

0.230 Joules = (1/2)(0.200 kg)v²

v² = (0.230 Joules) * (2/0.200 kg)

v² = 2.30 Joules/kg

v ≈ 1.516 m/s

Therefore, the maximum speed of the object is Umas ≈ 1.516 m/s.

To find the location of the object relative to equilibrium when it has one-third of the maximum speed, we can use the concept of energy conservation again. At this point, the kinetic energy is one-third of the maximum kinetic energy.

KE = (1/2)mv²

(1/3)KE = (1/6)mv²

Substituting the values into the equation:

(1/3)(0.230 Joules) = (1/6)(0.200 kg)v²

0.077 Joules = (0.0333 kg)v²

v² = 2.311 Joules/kg

v ≈ 1.519 m/s

Now, we need to find the displacement x of the object from equilibrium at this velocity. We can use the formula for the potential energy stored in the spring:

PE = (1/2)kx²

Rearranging the equation:

x² = (2PE) / k

x² = (2 * 0.230 Joules) / 95.0 N/m

x² ≈ 0.004842 m²

x ≈ ±0.0697 m

Since the object is moving to the right, the displacement x will be positive:

x ≈ 0.0697 m

Converting this to centimeters:

x ≈ 6.97 cm

Therefore, the location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

The maximum speed of the object is Umas ≈ 1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

To know more about speed, visit:

https://brainly.com/question/30249508

#SPJ11

A 20.0 kg cannonball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0°. Using conservation of energy, the maximum height reached by the cannonball is approximately 510.2 meters.

A cannon ball weighing 20.0 kg is launched from a cannon with an initial velocity of 100 m/s at an angle of 20.0° above the horizontal.

To determine the maximum height reached by the cannonball using the conservation of energy principle, we consider the conversion of kinetic energy into gravitational potential energy.

Initially, the cannonball has only kinetic energy, given by the equation KE = (1/2)mv², where m is the mass and v is the velocity.

At the highest point of its trajectory, the cannonball has no vertical velocity, meaning it has no kinetic energy but possesses gravitational potential energy, given by the equation PE = mgh, where h is the height and g is the acceleration due to gravity (approximately 9.8 m/s²).

Using the conservation of energy, we equate the initial kinetic energy to the maximum potential energy:

(1/2)mv² = mgh

Canceling the mass and rearranging the equation, we find:

v²/2g = h

Plugging in the given values, we have:

(100²)/(2*9.8) = h

Simplifying the equation, we find:

h ≈ 510.2 m

Therefore, the maximum height reached by the cannonball is approximately 510.2 meters.

To know more about maximum height refer here:

https://brainly.com/question/30878848#

#SPJ11

The displacement of a wave traveling in the negative y-direction depends on the amplitude and frequency of the wave.

The displacement of a wave traveling in the negative y-direction is a combination of factors. The first factor is the amplitude, which is the maximum distance that a particle moves from its rest position as a wave passes through it. The second factor is the frequency, which is the number of waves that pass a fixed point in a given amount of time. The displacement of a wave is given by the formula y = A sin(kx - ωt + ϕ), where A is the amplitude, k is the wave number, x is the position, ω is the angular frequency, t is the time, and ϕ is the phase constant. This formula shows that the displacement depends on the amplitude and frequency of the wave.

These variables have the same fundamental meaning for waves. In any case, it is useful to word the definitions in a more unambiguous manner that applies straightforwardly to waves: Amplitude is the distance between the wave's maximum displacement and its resting position. Frequency is the number of waves that pass by a particular point every second.

Know more about amplitude and frequency, here:

https://brainly.com/question/31863582

#SPJ11

(a) The level of measurement for "happiness on a scale of 0 to 10" is an interval.

The happiness scale from 0 to 10 represents an interval measurement. The scale has equal intervals between the numbers, but it does not have a true zero point. The absence of happiness (0) does not indicate the complete absence of the attribute being measured. Therefore, it is an interval level of measurement.

(b) The level of measurement for "family history of illness" is nominal.

Family history of illness is a qualitative variable that represents categories or groups. It does not have a numerical order or magnitude. It is simply a classification of whether or not there is a family history of illness. Hence, it is a nominal level of measurement.

(c) The level of measurement for "age" is a ratio.

Age is a quantitative variable that has a meaningful zero point and a numerical order. Ratios between values are also meaningful. For example, someone who is 20 years old is half the age of someone who is 40 years old. Age satisfies all the properties of a ratio level of measurement.

(d) The level of measurement for "temperature" is an interval.

Temperature is a quantitative variable that can be measured on a scale such as Celsius or Fahrenheit. While temperature has equal intervals between the values, it does not have a true zero point (absolute absence of temperature). Therefore, it is an interval level of measurement.

To learn more about magnitude click here

https://brainly.com/question/29766788

#SPJ11

The

magnitude

of the truck's velocity

is approximately 22.783 m/s.

To solve this problem, we can break down the velocities into their x and y components.

The

car's velocity

is directed due north, so its

x-component is 0 m/s and its y-component is 17.3 m/s.

The truck's velocity is directed 52.0° north of east. To find its x and y components, we can use trigonometry. Let's define the

angle

measured counterclockwise from the positive x-axis.

The x-component of the truck's velocity can be found using the cosine function:

cos(52.0°) = adjacent / hypotenuse

cos(52.0°) = x-component / 23.0 m/s

Solving for the x-component:

x-component = 23.0 m/s * cos(52.0°)

x-component ≈ 14.832 m/s

The y-component of the truck's velocity can be found using the sine function:

sin(52.0°) = opposite / hypotenuse

sin(52.0°) = y-component / 23.0 m/s

Solving for the y-component:

y-component = 23.0 m/s * sin(52.0°)

y-component ≈ 17.284 m/s

Now, we can find the magnitude of the truck's velocity by using the

Pythagorean theorem

:

magnitude = √(x-component² + y-component²)

magnitude = √((14.832 m/s)² + (17.284 m/s)²)

magnitude ≈ √(220.01 + 298.436)

magnitude ≈ √518.446

magnitude ≈ 22.783 m/s

Therefore, the magnitude of the truck's

velocity

is approximately 22.783 m/s.

To know more about

magnitude

visit:

https://brainly.com/question/30337362

#SPJ11

The child's angular displacement during a 1.0 s time interval is approximately 1.432 radians.

To determine the angular displacement of the child on the merry-go-round during a 1.0 s time interval, we can use the formula:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

The angular velocity (ω) can be calculated by dividing the total angular displacement by the total time taken to complete one revolution.

In this case:

Time taken to go around once (T) = 4.4 s

Angular Velocity (ω) = 2π / T

Angular Velocity (ω) = 2π / 4.4 s ≈ 1.432 radians/s

Now, we can calculate the angular displacement during a 1.0 s time interval:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

Angular Displacement (θ) = 1.432 radians/s × 1.0 s

Angular Displacement (θ) ≈ 1.432 radians

Learn more about angular displacement here:

https://brainly.com/question/31387317

#SPJ11

The angular displacement of the child during a 1.0 s time interval is 1.44 radian. The given values are, Time taken by the child to go around once, t = 4.4 s Time interval, t₁ = 1 s

Formula used: Angular displacement (θ) = (2π/t) × t₁. Substitute the given values in the formula, Angular displacement (θ) = (2π/t) × t₁= (2π/4.4) × 1= 1.44 radian. Thus, the angular displacement of the child during a 1.0 s time interval is 1.44 radian.

The change in the angular position of an object or a point in a rotational system is known as angular displacement and it measures the amount and direction of rotation from an initial position to a final position. Angular displacement is an important concept in physics and engineering, as it helps to describe a rotational motion.

To know more about angular displacement, refer

https://brainly.com/question/31150979

#SPJ11

Relativistic thought refers to the recognition that our perceptions and beliefs are influenced by our experiences, upbringing, and cultural and social environments, according to Perry.

It suggests that reality is subjectively constructed rather than objectively discovered, and that what is "true" or "right" for one person or group may not be for another. Relativistic thinking entails a degree of tolerance for opposing viewpoints and a willingness to engage in dialogue rather than debate or dismiss opposing perspectives. Instead of seeing things in black and white, relativistic thought acknowledges the nuances and complexity of human experience and acknowledges that there may be multiple valid perspectives on any given issue.

To know more about degree of tolerance, visit:

https://brainly.com/question/32378860

#SPJ11

It has been determined that the focal length of the lens is -0.6667 m.

Given: The refractive power of a lens is -1.50We are supposed to find the focal length of the given lens

Solution:The formula to find the focal length of a lens is given by:1/f = (n-1) (1/R1 - 1/R2)

Given: Refractive power (P) = -1.50

As we know that, P = 1/f (Where f is the focal length)

Hence, -1.50 = 1/fOr, f = -1/1.5= -0.6667 m

Therefore, the focal length of the given lens is -0.6667 m.

From the above calculations, it has been determined that the focal length of the lens is -0.6667 m.

To know more about focal length visit:

brainly.com/question/31755962

#SPJ11