A computer store sells Ultra Fast brand desktop and laptop computers. They tracked the sales of both kinds of computers over five days. The table shows the sales data. Make a double-line graph of the data.

The shape that results from connecting the points (-4, 1), (-4, -4), (0, 3), and (0, 6) is a trapezoid.

A trapezoid is a geometric form that has four sides, two of which are parallel and two of which are nonparallel (or skew lines). A trapezoid is also known as a trapezium (UK) or a trapeze (US).

The trapezoid's parallel sides are known as the bases, and the two nonparallel sides are known as the legs or lateral sides. The trapezoid is also sometimes referred to as the irregular quadrilateral.

A quadrilateral is a shape that has four sides, four vertices, and four angles. The following are the characteristics of a trapezoid:

The formula for the area of a trapezoid is as follows:

Area of a trapezoid = [ (base 1 + base 2) / 2 ] x height

To know more about the "trapezoid": https://brainly.com/question/1463152

#SPJ11

a. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{17}}$.

b. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{51}}$.

c. You would need to know that the population distribution of X, teacher salaries, is normal in order to answer the questions regarding any sample size.

d. Assuming a sample size of 51, the probability that the sampling error is within $1000 is approximately 0.84 or 84%.

e. Assuming a sample size of 51, the 90th percentile for the average teacher's salary is approximately $54488.

f. Assuming that teacher's salaries are normally distributed, the 90th percentile for an individual teacher's salary is approximately $56396.

Learn more about mean:

https://brainly.com/question/20118982

#SPJ11

Answer:

3 pounds of coffee.

Step-by-step explanation:

Equation

y = -7.37x + 80  

substitute 57.89 for y

57.89 = -7.37 + 80   Subtract 80 from both sides

57.89 - 80 = -7.37 + 80 - 80

-22.11 = -7.37x  Divide both sides by -7.37

3 = x

3 pound of coffee

Helping in the name of Jesus.

Answer:

rita received a $80 gift card for a coffee store. she used it in buying some coffee that cost $7.37 per pound. after buying the coffee, she had $57.89 left on her card. How many pounds of coffee did she buy?​

Step-by-step explanation:

Let's first find out how much money Rita spent on coffee:

$80 (initial balance) - $57.89 (remaining balance) = $22.11 spent on coffee

Now, let x be the number of pounds of coffee that Rita bought. Since the coffee costs $7.37 per pound, we can set up the equation:

$7.37x = $22.11

Solving for x, we can divide both sides by $7.37:

x = 3

Therefore, Rita bought 3 pounds of coffee.

This principle is validated by the data shown in the table.

Tests and measurements is an essential aspect of the education process as it enables educators to gauge the level of knowledge and skills their students have acquired. The principle that longer tests tend to be more reliable than shorter ones has some merit because it allows educators to assess a broader range of skills and knowledge, which increases the validity of their assessments.In my opinion, the principle that longer tests tend to be more reliable than shorter ones is illustrated in the reliability coefficients shown in the table. This is because the data shows that the reliability coefficients for longer tests are consistently higher than those for shorter tests. Additionally, the results for the 10-item test indicate a higher reliability coefficient compared to the 5-item test, which supports the notion that longer tests are more reliable than shorter ones.The table displays that the longer tests have higher reliability coefficients compared to the shorter tests. For example, in the 5-item test, the reliability coefficient is .45, while the 10-item test's reliability coefficient is .73. This shows that the 10-item test is more reliable than the 5-item test, as the higher reliability coefficient indicates that the assessment is consistent in measuring the skill or knowledge it is intended to measure. As a result, this principle is validated by the data shown in the table.

Learn more about principle

brainly.com/question/30388578

#SPJ11

The probability that it the marble taken out of the box is not blue is [tex]\frac{112}{131}[/tex].

Probability is a branch of math that studies the chance or likelihood of an event occurring.
There are [tex]75[/tex] red marbles, [tx]37[/tex] white marbles, and [tex]19[/tex] blue marbles.

If a marble is randomly selected from the box, we have to find the probability that it is not blue.

Then the total number of marbles = [tex]75 + 37 + 19 = 131.[/tex]

The probability that a marble is not blue:-

[tex]P[/tex](Not blue) = [tex]P[/tex](Red or White)

[tex]P[/tex](Red or White) = [tex]\frac{(75 + 37)}{131}[/tex]

[tex]P[/tex](Red or White) = [tex]\frac{112}{ 131}[/tex]

[tex]P[/tex](Not blue) = [tex]1 - P[/tex](Blue)

[tex]P[/tex](Not blue) = [tex]1 - \frac{19}{131}[/tex]

[tex]P[/tex](Not blue) = [tex]\frac{112}{ 131}[/tex]

Therefore, the probability that a marble selected from the box is not blue is [tex]\frac{112}{131}[/tex].

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

Answer:

k

Step-by-step explanation:

2x+13<5x−20

Subtract 5x from both sides.

Combine 2x and −5x to get −3x.

Subtract 13 from both sides.

Subtract 13 from −20 to get −33.

Divide both sides by −3. Since −3 is negative, the inequality direction is changed.

​

x>11

Answer: $3.64

Step-by-step explanation:

At the store, you buy four toys for $1.5, which means you pay $1.5 * 4, or $6.

Then, you calculate the sales tax, which is 6%, which means you multiply $6 by (100% + 6%), or $6*(1.06) which is $6.36.

Finally, if you hand the cashier $10, and you spent $6.36, your change is $10 - $6.36, which is $3.64.

a. Two levels of factor B were used in the experiment.

b. The degrees of freedom associated with interaction are 50.

c. The error mean square is 6.00. d. The mean square for factor A is 175.00.e. The experiment was conducted with three replicates.f. The interaction is significant. Factor A is significant. Factor B is not significant.g. An estimate of the standard deviation of the response variable is 2.449. h. If the experiment had been run in blocks (CRBD) there would have been 12 degrees of freedom for blocks.Solution:Factorial design: A factorial design is an experimental design that consists of two or more factors, each with two or more levels, and each subject is assigned to one and only one level of each factor. The objective of a factorial experiment is to analyze the effect of each factor on the response variable and to examine if there is any interaction between factors.a. Two levels of factor B were used in the experiment.b. Interaction degrees of freedom = AB = 50.c.

Mean square for error: MSE = 150/10 = 15.d. Mean square for factor A: MS(A) =[tex]SSA/dfA = 350/2 = 175.e.\\[/tex] Three replicates were conducted (from the error df = 10).f. Interaction is significant. Factor A is significant. Factor B is not significant.g. Estimate of the standard deviation of the response variable: sqrt(15/2) = 2.449.h. If the experiment had been conducted in a CRBD, there would have been 12 degrees of freedom for the block.

for such more questions on standard deviation

https://brainly.com/question/475676

#SPJ11

Answer:

4m + 6

Step-by-step explanation:

Since the length is twice as long your equation should look like this

2(2m + 3) = L

which would be 4m + 6 as the length of the rectangle

Pattern B shοws a quadratic relatiοnship between the step number and the number οf dοts.

Wοrd prοblems are οften described verbally as instances where a prοblem exists and οne οr mοre questiοns are pοsed, the sοlutiοns tο which can be fοund by applying mathematical οperatiοns tο the numerical infοrmatiοn prοvided in the prοblem statement. Determining whether twο prοvided statements are equal with respect tο a cοllectiοn οf rewritings is knοwn as a wοrd prοblem in cοmputatiοnal mathematics.

Here pattern B shοws a quadratic relatiοnship between the step number and the number οf dοts.

We can write quadradic equation as [tex]y=1+x^2[/tex]

Where y is number οf dοts and x is step number.

Then if x=0 and y=1

If x = 1 and y = 2

If x = 2 and y = 5

If x = 3 and y = 10

Hence Patten B fοllοws the quadratic realatiοnship.

Tο learn more about word problem refer the below link

https://brainly.com/question/21405634

#SPJ1

According to the circle theorem, we can find the length of the cord, x = 4 units.

Geometrical assertions known as "circle theorems" set forward significant conclusions pertaining to circles. These theorems provide significant information regarding several aspects of a circle.

A circle's chord is a line segment that hits the circle twice on its edge, separating it into two equal pieces. The circle is divided into two equal pieces by the longest chord of the circle, which runs through its centre.

Here in the given circle,

As per the intersecting chords theorem,

AB × CB= BE × BD

⇒ 6 × 6 = 9× x

⇒ x = 36/9=4

Therefore, the length of the chord, x = 4 units.

To know more about circle theorem, visit:

https://brainly.com/question/19906313

#SPJ1

Answer:

Step-by-step explanation:

The given line is y = 5x + 2. We know that any line perpendicular to this line will have a slope that is negative reciprocal of 5. The negative reciprocal of 5 is -1/5.

Line A is perpendicular to y = 5x + 2, so it has a slope of -1/5. We also know that the y-intercept of line A is 3. Therefore, the equation of line A can be written as:

y = (-1/5)x + 3

or in the form y = mx + c, where m = -1/5 and c = 3.

Answer:

The equation of a line perpendicular to y=3 that goes through the point (-5, 3) is: x = -5.

Step-by-step explanation:

To find the equation of a line perpendicular to y=3 that goes through the point (-5, 3), we need to remember that the slope of a line perpendicular to another line is the negative reciprocal of the slope of the original line.

The equation y=3 is a horizontal line that goes through the point (0,3), and its slope is zero. The negative reciprocal of zero is undefined, which means that the line perpendicular to y=3 is a vertical line.

To find the equation of this vertical line that goes through the point (-5, 3), we can start with the point-slope form of a linear equation:

y - y1 = m(x - x1)

where m is the slope of the line and (x1, y1) is a point on the line. Since the line we want is vertical, its slope is undefined, so we can't use the point-slope form directly. However, we can still write the equation of the line using the point (x1, y1) that it passes through. In this case, (x1, y1) = (-5, 3).

The equation of the vertical line passing through the point (-5, 3) is:

x = -5

This equation tells us that the line is vertical (since it doesn't have any y term) and that it goes through the point (-5, 3) (since it has x=-5).

So, the equation of a line perpendicular to y=3 that goes through the point (-5, 3) is x = -5.

Answer:

x= -5

Step-by-step explanation:

The perpendicular line is anything with x= __.

x= -5 however, will go through the point (-5, 3) and that is our answer.

Answer:

a. Jason's equation in y = mx + b form is y = 15x + 1.

b. Scott's equation in y = mx + b form is y = 15x.

Since both are moving at the same speed, they will meet at the point where their distances from the starting point are the same. Let d be the distance from Scott's starting point to the store. Then, the distance from Jason's starting point to the store is d + 1. Using the formula distance = rate × time, we can set up an equation:

15t = d

15t - 1 = d + 1

Solving for t in both equations, we get t = d/15 and t = (d+2)/15, respectively. Equating these expressions for t, we get d/15 = (d+2)/15, which simplifies to d = -2. This means that they will not meet before reaching the store, as Jason is already 1 mile ahead of Scott and will stay ahead throughout the trip.

If we were to graph both lines on the same coordinate plane, we would have two parallel lines with a slope of 15, where Jason's line would intersect the y-axis at 1.

Answer:

To write the equation of a circle given its center and a point on the circle, we need to use the standard form of the equation of a circle, which is:

(x - h)^2 + (y - k)^2 = r^2

where (h, k) is the center of the circle and r is the radius.

Let's use point A as the point on the circle. We are given that the center of the circle is (4, -2) and point A is (6, 1). We can use the distance formula to find the radius of the circle:

r = √[(6 - 4)^2 + (1 - (-2))^2] = √[4^2 + 3^2] = 5

Now we can substitute the center and radius into the standard form equation:

(x - 4)^2 + (y + 2)^2 = 5^2

Simplifying and expanding the right-hand side, we get:

Therefore, the equation of the circle is (x - 4)^2 + (y + 2)^2 = 25 and we used point A to find it.

Answer:

h = 15 cm

Step-by-step explanation:

Area of triangle equals the area of rectangle. As the dimensions of the rectangle is given, we can first find the area of the rectangle.

      [tex]\boxed{\bf Area \ of \ the \ rectangle = length * width}[/tex]

                                               = 10 * 9

                                               = 90 cm²

Area of triangle = area of rectangle

                          = 90 cm²

base of the triangle = b = 12 cm

 [tex]\boxed{\bf Area \ of \ triangle = \dfrac{1}{2}bh}[/tex]  where h is the altitude and b is the base.

         [tex]\bf \dfrac{1}{2} b* h = 90 \\\\\dfrac{1}{2}*12* h = 90[/tex]

                      [tex]\bf h = \dfrac{90*2}{12}\\\\\boxed{\bf h = 15 \ cm}[/tex]

The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Learn more about Percentage

brainly.com/question/2155156

#SPJ11

The rounding of the number to 1 significant figure is-

216 × 876 = 180000

216 × 876

This number can be written in form of rounding to 1 significant figure as;

200 × 900 = 180000

To know more about the significant figure, here

https://brainly.com/question/293578

The missing value to find the length of BC is 9x.

The distance formula is a formula for calculating the separation in coordinates between two places. It is provided by and deduced from the Pythagorean theorem by:

distance = √((x₂ - x₁)² + (y₂ - y₁)²)

The distance formula is used to compute distances between objects or places in many disciplines, including geometry, physics, and engineering.

The distance formula is given as:

distance = √((x₂ - x₁)² + (y₂ - y₁)²)

Substituting the values of the coordinates of B and C we have:

distance = √((7x - (-2x))² + (-1y - (-4y))²)

distance = √((9x)² + (3y)²)

distance = √(81x² + 9y²)

distance = 3√(9x² + y²)

Hence, the missing value to find the length of BC is 9x.

Learn more about distance formula here:

https://brainly.com/question/28956738

#SPJ1

Answer:

[tex]\frac{11}{8}[/tex]

Step-by-step explanation:

3(2k+3)=6-(3k-5)

6k +9=6-3k+5

6k+3k=6+5

8k=11

k=[tex]\frac{11}{8}[/tex]

Answer: I think it is k=2/9

Step-by-step explanation:

Therefore, the slope of the line passing through the points (0,5) and (2,0) is -5/2.

In mathematics, slope refers to the measure of steepness of a line. It is the ratio of the change in y (vertical change) over the change in x (horizontal change) between any two points on the line. The slope of a line is represented by the letter "m" and can be calculated using the slope formula: m = (y2 - y1) / (x2 - x1) where (x1, y1) and (x2, y2) are the coordinates of two points on the line.

Here,

To find the slope of a line, we use the formula:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are any two points on the line.

Using the given coordinates, we have:

x1 = 0, y1 = 5

x2 = 2, y2 = 0

slope = (0 - 5) / (2 - 0)

slope = -5/2

To know more about slope,

https://brainly.com/question/29184253

#SPJ1

Answer: Associative property

Step-by-step explanation:

The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!

Answer:

three times

Step-by-step explanation:

The surface area of the rectangular prism is 170 square yards.

Surface area is the total area of a three-dimensional shape's surface. Add the areas of all six faces to find the surface area of a cuboid with six rectangular faces. Alternatively, label the cuboid's length (l), width (w), and height (h) and use the formula: surface area (SA)=2lw+2lh+2hw.

To calculate the surface area of the rectangular prism, add the areas of each of its faces.

The front and back faces are 5 yards by 6 yards in size, so each has an area of:

5 yards x 6 yards equals 30 square yards

The top and bottom faces are 5 yards by 5 yards, so each has an area of:

5 yards x 5 yards equals 25 square yards

The two side faces have dimensions of 6 yards by 5 yards, for a total area of:

30 square yards = 6 yards x 5 yards

As a result, the surface area of the rectangular prism is as follows:

Front face area plus back face area plus top face area plus bottom face area plus left side face area plus right side face area

= 30+30+25+25+30+30

= 170 square yards

As a result, the rectangular prism has a surface area of 170 square yards.

To know more about surface area visit:

hhttps://brainly.com/question/29298005

#SPJ1

Answer:

[tex]{ \sf{ = 41 \times 100 + 41 \times { \boxed{2}}}} \\ \\ = { \sf{ \boxed{4100} + { \boxed{82}}}} \\ \\ = { \sf{ \boxed{4182}}}[/tex]

Answer:

A- 2

B- 4,100

C- 82

D- 4,182

First of all, perfect squares do not end in 2.

The exponent has to be an even number when 2 is the base. For example 2^8 = 64. 8 is an even number. So 64 is a square number.

The statement that is correct is (D) We can use the binomial distribution with n = 100, k = 10, and p = 0.24 to calculate this probability.

The binomial distribution can be used to calculate the probability of a certain number of successes in a given number of trials, where each trial has a fixed probability of success.

The probability of a flight being delayed is 0.24, and the probability of a flight not being delayed is 0.76. Therefore, the probability of exactly 10 flights out of 100 being delayed can be calculated using the binomial distribution with n = 100, k = 10, and p = 0.24.

Learn more about binomial distribution here: https://brainly.com/question/30049535

#SPJ11

(a) Point estimate (mean difference): 2.2 tomatoes. (b) The standard deviation of differences: Approximately 3.47. (c) The test statistic: Approximately 1.38.

To perform a t-test for the population mean difference, follow these steps:

(a) Calculate the point estimate (mean difference): The point estimate is the mean difference between the yields of fertilizer A and fertilizer B.

Mean difference = (Sum of differences) / Number of pairs

Using the given data gives:

Mean difference = ((7-4) + (6-7) + (5-6) + (8-5) + (10-3)) / 5

Subtracting gives:

Mean difference = (3 - 1 - 1 + 3 + 7) / 5

Solving gives:

Mean difference = 11 / 5

Dividing gives:

Mean difference = 2.2

(b) Calculate the standard deviation of the differences:

To calculate the standard deviation of the differences, we need to calculate the squared differences, find their sum, divide by (n-1), and then take the square root.

Squared differences:[tex](3 - 2.2)^2, (-1 - 2.2)^2, (-1 - 2.2)^2, (3 - 2.2)^2, (7 - 2.2)^2[/tex]

Solving gives:

Sum of squared differences = (0.64 + 12.96 + 12.96 + 0.64 + 21.16)

Solving gives:

The sum of squared differences = 48.36

The standard deviation of the differences [tex]= \sqrt{48.36 / 4}[/tex]

Solving gives:

The standard deviation of the differences [tex]= \sqrt{2.09}[/tex]

Rounded to three decimal places

The standard deviation of the differences ≈ 3.47

c) Calculate the test statistic:

The test statistic (t) = (Point estimate - Null hypothesis value) / (Standard deviation /√(sample size))

Let's assume the null hypothesis is that there is no difference between the two fertilizers

(i.e., mean difference = 0).

[tex]t = (2.2 - 0) / (3.47 / \sqrt5)[/tex]

Substituting [tex]\sqrt 5 = 2.236[/tex]

t = 2.2 / (3.47 / 2.236)

Rounded to two decimal places

t ≈ 1.378

So, the test statistic is approximately 1.378.

The gardener can compare this test statistic to critical values from the t-distribution to determine whether the difference between the two fertilizers is statistically significant at a certain significance level. If the calculated test statistic is greater than the critical value, she ma

Learn more about t-tests here:

https://brainly.com/question/1189751

#SPJ12

​