Answer:
shdkahfkkfrgs
Explanation:
:)
Calculate the wavelength of a water wave with a speed of 3.0 m/s and frequency of
4.0 Hz.
Answer:
the answer is 12.0
The wavelength of the water wave is 0.75 meters.
What is wavelength?Wavelength is the distance between successive peaks or troughs of a wave. It is denoted by the symbol λ (lambda) and is measured in meters (m) or other units of length.
The wavelength of a wave determines its properties such as its energy, frequency, and speed. In general, waves with longer wavelengths have lower frequencies and travel at slower speeds, while waves with shorter wavelengths have higher frequencies and travel at faster speeds.
Here in the Question,
The relationship between the wavelength (λ), frequency (f), and wave speed (v) of a wave is given by the equation:
v = λf
We are given the speed of the water wave (v) as 3.0 m/s and the frequency (f) as 4.0 Hz.
Plugging these values into the equation, we get:
3.0 m/s = λ x 4.0 Hz
Rearranging the equation to solve for the wavelength, we get:
λ = v/f = 3.0 m/s ÷ 4.0 Hz = 0.75 m
λ = 0.75 m
Therefore, the wavelength of the water wave is 0.75 meters.
To learn about the relationship between wave energy and amplitude click:
https://brainly.com/question/17003906
#SPJ2
A 0.225 kg sample of tin initially at 97.5°c is dropped into 0.115 kg of water. the initial temperature of the water is 10.0°c. if the specific heat capacity of tin is 230 j/kg • °c, what is the final equilibrium temperature of the tin-water mixture
Answer:
The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C
Explanation:
The parameters of heat energy transfer from the tin to the water are given as follows;
The mass of the sample of tin, m₁ = 0.225 kg
The initial temperature of the tin, T₁ = 97.5 °C
The mass of the water into which the tin is dropped, m₂ = 0.115 kg
The initial temperature of the water, T₂ = 10.0 °C
The specific heat capacity of tin, c₁ = 230 J/(kg·°C)
The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)
Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;
The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]
∴ ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]
Where;
ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)
ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)
By substitution, we have;
ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)
ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)
From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;
0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)
∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J
5,045.625 J + 4,830 J = 534.75 J/°C × T
∴ 534.75 J/°C × T = 9,875.625 J
T = 9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C
The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.
PLEASE HELPPPPP!!!!!!!!!
TRUE OR FALSE
1. TRUE OR FALSE: The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be.
2. TRUE OR FALSE: The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave.
3. TRUE OR FALSE: In a transverse wave the higher the wave, the LOWER the amplitude
4. Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave.
5. TRUE OR FALSE: Speed is a measure of the distance a wave travels in an amount of time
6. TRUE OR FALSE: As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media
7. TRUE OR FALSE: The highest point of a transverse wave is the crest and the lowest point is called a trough.
Answer:
Explanation:
true true fauls true fauls fauls
1 . The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be. FALSE
2. The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave. TRUE
3. In a transverse wave the higher the wave, the LOWER the amplitude FALSE
4.Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave, TRUE
5. Speed is a measure of the distance a wave travels in an amount of time TRUE
6. As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media TRUE
7. The highest point of a transverse wave is the crest and the lowest point is called a trough. TRUE
What is Wave ?A wave is a disturbance in a medium that carries energy and as well as momentum. Energy can be transferred in the form of wave in the medium. there are two types of wave,
longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave as shown in the fig.1. Sound wave is a longitudinal wave.
Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave as shown in the fig.2. Light wave is a longitudinal wave.
1. E = hυ where υ is a frequency which shows direct relation between Energy E and frequency υ. Hence it is false.
2. True
3. In a transverse wave the higher the crest in the wave, the higher the amplitude. FALSE
4. True
5. True, Speed = Distance÷Time
6. due to change in refractive index, velocity changes TRUE
7.True
To know more about wave, click :
https://brainly.com/question/3639648
#SPJ3
I only have 3 minutes left this is my last question
Big sound is heard in bathroom than in a living room
Answer
That doesn't make any sense.
Explanation:
An object with a mass of 2.0 kg accelerates 2.0 m/s 2when an unknown force is applied to it. What is the amount of force?
Answer:
4 N
Explanation:
mass = 2 kg
acceleration = 2 m/s^2
Force = mass * acceleration
= 2 *2
= 4 N
I AM TIMED !! 30 POINTS Which is the smallest possible particle of an element?
O molecule
O atom
O compound
O matter
Answer:
atoms
Explanation:
they are the smallest
A horizontal net force F is exerted on an object at rest. The object starts at x=0 m and has a speed of 4.0 m/s after moving 4.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below
Explanation:
The solution is be found in the attachment.
A horizontal net force F is exerted on an object at rest. The object starts at x = 0 m and has a speed of 4.0 m/s after moving 8.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below.
What is the mass of the object?
Answer: 30 kg
a clay ball with a mass of 0.35 kg hits another 0.35 kg ball at rest and the two stick together. The first balls intial speed us 4.2m/s.
What are the balls final speed?
Answer:
4.2 m/s
the balls final speed is V (m/s)
because the clay ball hits another and the two stick together
=> 0,35.4,2 + 0,35.4,2 = (0,35 + 0,35).V
<=> 2,94 = 0,7V
<=> V = 2,94/0,7 = 4,2
For a clay ball with a mass of 0.35 kg, the ball's final speed is mathematically given as
V2= 4.2
What is the balls final speed?Question Parameter(s):
A clay ball with a mass of 0.35 kg
Hits another 0.35 kg ball at rest and the two stick together.
The first ball's initial speed is 4.2m/s.
Generally, the equation for the conservation of momentum is mathematically given as
M1v1=m2v2
Therefore
0.35*4.2 + 0.3*5.4.2 = (0.35 + 0.35)*V
2,94 = 0,.7V
V2 = 2.94/0.7
V2 = 4.2
In conclusion
V2= 4.2
Read more about Speed
https://brainly.com/question/4931057
#SPJ2
A rock has 750 J of potential energy as it sits on a ledge. If the rock were pushed off the ledge, how much would it have just before it hit the ground?
Answer:
the 750 j will have potential energy is 375
Explanation:
750/2 is 375
How would you describe your appetite over the past couple of weeks? Have your eating habits altered in any way?
Answer:
no im in a rehab program so we eat the sam shi every day
Explanation:
brainlest?
Explanation:
During lockdown, I ate LOADS OF JUNK FOOD. TRUST ME!!
I gained 14 kg of weight and became 68 kg
just due to junk food.I am 13 btw and at that time I was 5 feet 4 so definitely fat. all those pizzas and burgers and all.then I realised that I have gained weight. I have to REDUCE MY WEIGHT. I am quite determined on what I say. it took me 3 months or so and I finally got back to my original weight. How? just by going for a stroll everyday, eating healthy and constantly working out. eating less is not the solution,eating less calories is the solution.Also, by eating healthy food,I grew taller. I am 5 feet 6 now. So yes, definitely it helps put alot and keep eating healthy food and you will definitely be healthy.
Thank You.
The law of universal gravitation describes the relationships between
Group of answer choices
A. unbalanced force, balanced force, and net force.
B. speed, distance, and time.
C. speed, velocity, and acceleration.
D .force, mass, and distance.
Answer:
D force mass and distance
Is the potential energy on the surface of Earth zero?If not,what will be it's value?
Answer:
Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.
If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.
So everything would still work fine.
In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.
Explanation:
PLEASE MARK ME AS BRAINLIEST
A fault is formed by the movement of a ___ plate boundary
A.convergent
B.traditional
C.divergent
D.transform
Whats the word for when "velocity equals 0 and direction changes" Its 14 letters, and I have _ _ _ _ i _ _ _ _ _ h_ i _ _ t
Answer:
Maximum Height
Explanation:
The maximum height is the highest point reached by a projected body. At this point, final velocity, v of the body is equal to 0; because upward motion is at its peak and the body start to fall again.
Hence, final velocity v is always 0 at this maximum point and the direction of motion changes from upward to downward.
Final velocity at this maximum height is zero because of the directional change experied by the object and the fact that upward motion of the body terminates at this point.
which system of units is used by only a small number of countries in the world, including the u.s
Answer:
imperial system
Explanation:
Answer:
british system
Explanation:
A P E X
Determine the torque
produced by a perpendicular force of 75
N at the end of a 0.2 m wrench.
Answer:
Explanation:
the answer is C.)
The torque produced by a perpendicular force of 75 N at the end of a 0.2 m wrench is 15 Nm.
What is torque?The force which causes the object to rotate about any axis is called torque. In math form, it is equivalent to the product of force and perpendicular distance.
Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.
Given:
The perpendicular force on the wrench, P = 75 N,
The length of the wrench, r = 0.2 m,
Calculate the torque of the wrench as shown below,
The torque of the wrench = r × P × sin a
Here, the force is perpendicular hence, a = 90°
The torque of the wrench = 0.2 × 75 × sin90
The torque of the wrench = 15 × 1
The torque of the wrench = 15
Thus, the torque on the wrench is 15 Nm.
To know more about torque:
https://brainly.com/question/28220969
#SPJ2
Why does the Moon appear red during a lunar eclipse?
1.)Because the sunlight bends as it passes through the Earth's atmosphere
2.)Because the sunlight bends as it passes through the Moon's atmosphere
Answer:
Image result for Why does the Moon appear red during a lunar eclipse?
A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere
2. A large collection of stars, gas, and dust is called a _____?
Write down the use of light pipe.???
calculate the ground pressure of a 90kg gas cylinder the diameter of the cylinder is 1.1 m
Answer:
P = 928.09 Pa
Explanation:
Given that,
Mass of a gas cylinder, m = 90 kg
The diameter of the cylinder, d = 1.1 m
Radius, r = 0.55 m
We need to find the ground pressure. The pressure is equal to force per unit area. So,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]
So, the ground pressure is 928.09 Pa.
A sledgehammer is an example of what kind of simple machine?
A. Wheel and axle
o
B. Screw
c
C. Wedge
D. Lever
SUS
I am 95 percent sure the answer in C
Answer: C
Explanation:
9. In a closed circuit made of a battery, a wire, a lightbulb, and a switch which part's main responsibility is allowing electricity to flow over a distance?
A: battery
B: light bulb
C: switch
D: wire
Answer:
d
Explanation:
Answer:
D: wire
Explanation:
+
1. Energy due to motion is
_______ energy
Answer:
Kinetic energy
Explanation:
The energy associated with an object's motion is called kinetic energy. A speeding bullet, a walking person, and electromagnetic radiation like light all have kinetic energy.
Kinetic energy. For example, a walking person.
The illustration shows the forces in Newtons (N) acting on three different blocks. Which
boxes will move under these conditions?
Answer:a
Explanation:because I know
Answer:
B & C
Explanation:
the first block will not move
What is the charge on an object that experiences a force of 5 Newtons in an electric field of 50 Newtons per coulomb?
Answer:
Explanation:
F = qE
F is the force in Newtons
q is the test charge
E is the electrical field produced by the source charge
[tex]5=q(50)\\q=1*10^-^1Coulombs[/tex]
The magnitude of charge on the object is of 0.1 C.
Given Data:
The magnitude of electric field is, E = 50 N/C.
The magnitude of Electric force is, F = 5 N.
The region where any particle feels the effect of electric force on itself, due to other charged entities, is known as Electric field. And the relation between the electric force and electric field is given as,
F = E × q
Here,
q is the magnitude of charge on the object.
Solving as,
q = F/E
q = 5 / 50
q = 0.1 C
Thus, we can conclude that the magnitude of charge on the object is of 0.1 C.
Learn more about the electric field here:
https://brainly.com/question/8971780
PLEASE PLEASE HELPPP!
Select all that apply!
Answer:
1 AND 3
Explanation:
Someone plz help I’m on a time limit :(
What patterns occur in the Earth-Sun-Moon system that allow us to identify the cause of
eclipses?
Answer:
Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).
The velocity of a car increases from 10 km/h to 50 km/h in 5 seconds. What is its acceleration?
Answer:
2.22m/s^2
Explanation:
