A feeder circuit with no motor lead has a continuous load of 5A and a noncontinuous load of 5A. the feeder overcurrent protective device should be sized at
11.25A

Answers

Answer 1

Electric illumination, process pumps and compressors needed to meet the design flow conditions, and either space heating or air conditioning, whichever is larger, are examples of continuous loads.

What A feeder circuit with no motor lead has continuous?

An ampere rating for circuit breakers is often noted on the operational handle's end. The breaker can handle this amount of continuous current up to its rating without failing. Generally speaking, the ampere rating of the circuit breaker should match the capacity of the line.

Therefore, the feeder overcurrent protective device should be sized at

11.25A

Learn more about feeder circuit here:

https://brainly.com/question/28314982

#SPJ1


Related Questions

34. A technique to improve accuracy when entering data in a worksheet by controlling the type of data or the values that can be entered is called A) Goal Seek B) Data validation C) Data protection D) What-If Analysis

Answers

Data validation is a method used to increase data entry accuracy by restricting the kinds of data or values that can be submitted.

How can inaccuracies in a worksheet be tracked down?

Select the formula cell that has the error visible in it in order to use Excel's Trace Error feature. Select the "Trace Error" drop-down menu under the "Formula Auditing" button group on the Ribbon's "Formulas" tab. Draw arrows to the cells producing the issue by selecting the "Trace Error" command from the drop-down menu.

Which method is utilized to find mistakes?

Techniques for error detection. The three primary methods for finding problems in frames are the parity check, checksum, and cyclic redundancy check (CRC).

To know more about Data validation visit :-

https://brainly.com/question/29033397

#SPJ4

In lab 2, assignment 2, you implemented a smoothing system using convolution with a box of length N and height 1/N: h1n=(un-un-N)/N. Find the coefficients {a, b} of the linear constant coefficient difference equation (LCCDE) describing this system for N=10. Find the coefficients for the system h1n=0.8nun

Answers

The smoothing system using convolution with a box of length N and height 1/N can be described by the following equation:

h1n=(un-un-N)/N

Step-by-step explanation:

To find the coefficients {a, b} of the linear constant coefficient difference equation (LCCDE) for this system, we can rewrite the equation as follows:

h1n = un/N - un-N/N

If we let a = 1/N and b = -1/N, we can express this equation as an LCCDE:

a * un + b * un-N = h1n

For N=10, the coefficients {a, b} are:

a = 1/10 = 0.1

b = -1/10 = -0.1

The coefficients for the system h1n=0.8nun can be found in a similar manner. If we let a = 0.8 and b = 0, we can express this equation as an LCCDE:

a * un + b * un-N = h1n

The coefficients for this system are:

a = 0.8

b = 0

Note that the LCCDE for the smoothing system using convolution with a box of length N and height 1/N is a first-order difference equation, as it depends on the current and previous values of the input signal (un and un-N). The LCCDE for the system h1n=0.8nun is also a first-order difference equation, as it depends only on the current value of the input signal (un).

To know more about System, visit: https://brainly.com/question/22946942

#SPJ4

Arrange the following NLP linguistic representation tasks in order, starting from the base level to higher level understanding Semantics Syntax Pragmatics Phonetics Morphology Phonology

Answers

NLP is a field of artificial intelligence and computational linguistics that focuses on the interaction between computers and human (natural) languages.

What is correct order?

The order of NLP linguistic representation tasks from the base level to higher level understanding is:

Phonetics: This is the study of the sounds of language and how they are produced, transmitted, and perceived.Phonology: This is the study of the patterns of sounds in a language and how they function within the larger system of the language.Morphology: This is the study of the internal structure of words and how they can be modified and inflected to convey different meanings.Syntax: This is the study of the rules that govern the structure of sentences in a language and how words are combined to form meaningful utterances.Semantics: This is the study of the meaning of words, phrases, and sentences in a language.Pragmatics: This is the study of how language is used in context and how context influences the interpretation of language.

Therefore, the correct order is: Phonetics, Phonology, Morphology, Syntax, Semantics, Pragmatics.

To Know More About Semantics, Check Out

https://brainly.com/question/873851

#SPJ4

Which scientist developed the planetary model that stated electrons were found in specific energy levels around the nucleus?

Answers

Rutherford model, also called Rutherford atomic model, nuclear atom, or planetary model of the atom, description of the structure of atoms proposed (1911) by the New Zealand-born physicist Ernest Rutherford.

Consider a system that has multiple processors in which each processor has its own cache, but main memory is shared among all processors.Which cache write policy would you use?With regard to this system, what problems are caused if a processor has a copy of memory block A in its cache and a second processor, also having a copy of A in its cache, then updates main memory block A? Can you think of a way (perhaps more than one) of preventing this situation, or at least of lessening its effects?

Answers

The Level 2 cache is lastly connected to the CPU but is external to it. The cache memory is made up of static random-access memory (SRAM).

What results does using a processor with a larger cache produce?

CPU 2. 11. What results does using a processor with a larger cache produce? More room for frequently used data and instructions, more storage for extremely quick access, and faster instruction and data retrieval all result in faster processing.

Why do we place a cache between the CPU and main memory?

A buffer between RAM and the CPU, cache memory is a very quick sort of memory. It stores data and instructions that are regularly requested so that the CPU can access them right away when necessary.

To know more about cache memory visit:-

https://brainly.com/question/16091648

#SPJ1

a 24-tooth gear has agma standard full-depth involute teeth with diametral pitch of 5. calculate the pitch diameter, circular pitch, addendum, dedendum, tooth thickness, and clearance.

Answers

A 24-tooth gear has full-depth involute teeth that are agma standard and have a diametral pitch of 5. Its circular pitch is 0.618 inches, addendum is 0.8333 inches, dedendum is 0.10417 inches, and diametrical pitch is 12.

What is a gear?

A gear is a spinning, circular machine element with teeth that mesh with another toothed component to transmit torque. The teeth can be cut or inserted (called cogs in the case of a cogwheel or gearwheel). A gear's teeth prevent slippage, which is a benefit.

Diametrical pitch is what?

Therefore, the diameter of the gear's pitch circle determines the gear's diametrical pitch. Depending on the measuring system employed, it is equivalent to the number of gear teeth per inch or per centimetre of its diameter.

Briefing:

Tooth Number, N = 24  

Diametral pitch pd = 12

Pitch diameter, d = N/pd = 24/12 = 2 inches

Circular pitch, pc = π/pd  = 3.142/12 = 0.2618 inches

Addendum, a  = 1/pd = 1/12 =0.08333 inches

Dedendum, b = 1.25/pd = 0.10417 inches

Tooth thickness, t = 0.5pc = 0,5 * 0.2618  = 0.1309 inches

Clearance, c = 0.25/pd = 0.25/12 = 0.02083 inches

To learn more about gears visit:

brainly.com/question/14455728

#SPJ4

aluminum metal undergoes the same basic corrosion process that iron does yet it does not decompose as rapidly. why?

Answers

Aluminum metal corrodes in the same way that iron does, but it does not decompose as quickly because aluminum oxide does not flake off just like rust and serves as a protective layer.

What is Rusting?

Rust is the chemical reaction that occurs when iron reacts with oxygen and water. However, the term "rust" is poorly defined in chemistry because many chemicals can be formed when iron is left exposed. However, the red, flaky appearance caused by certain chemicals is commonly referred to as rust.

In normal environmental conditions, corroding iron or steel produces a wide range of compounds. Depending on what molecules they pick up from the environment while rusting, some of these chemicals will be black, blue, yellow, gray, or brown. Acid rain, for example, can combine with iron to form molecules of pyrite, the yellow mineral known as "fool's gold". These minerals are not at all what we think of as rust. What we usually mean is an iron oxide (III) with a red or red-brown appearance.

To learn more about Aluminum metal, visit: https://brainly.com/question/27128704

#SPJ4

an audio engineer recorded a sound and digitized the recording. he noticed that the sound quality deteriorated significantly after the recording was digitized. which of the following changes should he make in the digitizing process if he wants to ensure that the quality of recordings are better preserved when converting to a digital format in the future?

Answers

The audio engineer should increase the sampling rate to ensure that the quality of recordings are better preserved .

What is a sampling rate?The number of samples taken from a continuous signal per second or per other unit, to create a discrete or digital signal is known as the sampling rate or sampling frequency. Frequencies are measured in hertz (Hz) or cycles per second for time-domain signals such as sound waveforms and other types of audio-visual content. The Nyquist principle asserts that when the sampling frequency is larger than twice the maximum frequency of the signal being sampled, perfect reconstruction of the signal is feasible. The sound frequency range that can be represented by the digital waveform depends on the sampling rate and corresponds to pitch.A waveform's bandwidth is the spectrum of frequencies that it may represent.

To learn more about  sampling rate, refer:

https://brainly.com/question/29519477

#SPJ4

obviously microinverter solar panels need 240 volts signal to function from the grid. can you simulate this

Answers

Answer:

Explanation:

Microinverter solar panels are photovoltaic (PV) panels that are equipped with microinverters, which are small electronic devices that convert the direct current (DC) electricity produced by the PV panels into alternating current (AC) electricity. The AC electricity produced by the microinverters can be used to power appliances and devices in a home or building, and it can also be fed back into the grid.

Microinverter solar panels are connected to the grid in a similar way to traditional PV panels. They require a 240V signal from the grid to function properly and to produce electricity. The microinverters in the panels convert the DC electricity produced by the PV cells into AC electricity, which is then fed back into the grid or used to power appliances and devices.

Consider the following delays for computation in each of the pipeline stages in a MIPS processor: IF:150psID:250psEX: 200 ps MEM:250psWB: 100 ps Given this, what is the latency of a load instruction in a five stage pipelined implementation of this MIPS processor?1000ps1250ps85025010 points Caches exploit and locality to reduce the overall time spent by processors in accessing data from the memory. 10 points Which of the following performance metrics does pipelining improve? Instruction execution time Instruction throughput Both of the above options None of the above

Answers

a. The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is given as follows: 950 ps.

b. The metrics improved by pipelining are given as follows:

Both of the above options. (execution time and throughput).

How to calculate the latency?

The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is calculated as the sum of the delays for each part.

The delays are given as follows:

150 ps, 250 ps, 200 ps, 250 ps, 100 ps.

Then the latency of the load instruction is calculated as follows:

150 + 250 + 200 + 250 + 100 = 950 ps.

What is pipelining?

Pipelining is when a sequence of instructions can be executed concurrently, thus reducing the execution time and increasing the amount of instructions that can be executed in a period of time (improving the throughput).

This means that both the execution time and the throughput are improved through pipeling.

More can be learned about pipelining at https://brainly.com/question/13684647

#SPJ1

Sketch the final shape of the crystal if the dislocations show below glide all the way across the crystal from one surface to the opposite one on the plane and in the direction indicated. a. Moves from left to right b. Moves from bottom to top c. Moves from left to right d. Moves from left to right The burgers vector is in the glide plane (as it must be!) and oriented at 45° to the line.

Answers

Edge dislocations can be attributed to the termination of an atom plane in the crystal's center.

An atom is what?

Each chemical element is distinguished from the others by atoms, which are tiny particles of matter. An atom is composed of a core nucleus that is negatively charged and one or more electrons in orbit. The protons and neutrons that make up the nucleus are positively charged and moderately heavy.

What elements make up atoms?

Quarks and electrons are the two main subatomic kinds that make up an atom. Around the atom's nucleus is a zone of electrons. The electrical charge on every electron is negative. The protons and neutrons that comprise the atom's nucleus are made up of quarks.

To know more about atom visit:

https://brainly.com/question/12231872

#SPJ4

an aerial photograph that has been processed to remove distortions due to orthographic effects or photo plane effects, such as the pitch and yaw of the aircraft is said to be

Answers

An orthophoto or orthophotograph is an aerial photograph that has been mathematically adjusted ("orthorectified") such that the scale is consistent; the image is devoid of distortion just like a map.

What distinguishes orthophoto from aerial photography?

A straight pipeline can be seen in the aerial view, however it is deformed due to camera tilting and terrain relief (topography). The pipeline's real, straight path is shown by the orthophoto, which cancels out the effects of tilt and relief.

How do orthophoto and orthomosaic differ from one another?

An orthophoto is a single image that has been corrected for distortions, but an orthomosaic is the result of stitching together all the orthophotos.

To know more about distortions visit :-

https://brainly.com/question/17404378

#SPJ1

Two tanks of the same volume are connected by a pipe containing a valve. Initially, the valve is closed, one tank is evacuated, and the other tank contains 40 g of steam at 15 bars and 280 C. The valve is opened and the steam flows into the evacuated tank until pressure equilibrium is reached. If the steam temperature at the end of the process is 440C in both tanks,determine
a. the final equilibrium pressure, in bars
b. the heat transfer, in kj
c. the entropy change, in kj / K, of the steam
d. the total entropy change, in kj / K

Answers

(a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K

(d) The total entropy change, in kj/K

How to Calculate the equilibrium and Entropy change?

We should understand that insulated tanks deal with systems that has change with respect to the amount of heat transferred through its surroundings.

The given parameters are

h₁=2993.4KJ/kg

S₁=6.8402KJ/kh.K

V₁=0.163cm³/kg

All these values are drawn from the steam table

The tank volume can be determined first using the formula

V=mx

Volume = 0.00652m³ while the mass balance = 0.5m₁=mₙ

This implies that the specific balance is V₂=V/mₙ

V₂=0.3350KJ/kg

S₂=7.59KJ/kg.k

(a) The final equilibrium pressure in bars = P₂=10 bars

(b)  The heat transfer, in kj is

m₂h₁+Q=m₂h₂

This implies that Q when made the subject is 14.264KJ

(c) The entropy change in kj/K of the steam is

Δs=0.03KJ/K

(d) The total entropy change, in kj/k steam is determined by

Δs=m(s₂-s₁) +Q/T

This implies that Δs=0.05KJ/K

In conclusion, (a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K

(d) The total entropy change, in kj/K

Learn more about equilibrium and entropy change on https://brainly.com/question/29696569

#SPJ1

determine the internal normal force at point c , which is located just to the left of the 60- lb concentrated load. express your answer to three significant figures and include the appropriate units.

Answers

130.5 kN  is internal normal force at point c.

What is  internal normal force?

The algebraic sum of the axial forces operating on either side of any segment of a structure is known as the normal force.

Support Reactions.a,

a+ΣMA = 0; By(60) - 1

Supporting Responses. Using the FBD of the full beam in Fig. an as a reference, a+MA = 0; By(6) - 1 2 (6)(6)(2) = 0 By = 6.00 kN

S+ ΣFx = 0; Bx = 0

Loadings within. Using Fig. b as an example, consider the FBD of the right segment of the beam sectioned via C.

S+ Σ Fx = 0; NC = 0 Ans. + cFy = 0; VC + 60.00 - 1. 2 (3)(3) = 0 VC

= -1.50 kN Ans. a+MC =

0; 60.00(3) - 1. 2 (3)(3)(1) - MC = 0

MC = 130.5

130.5 kN  is internal normal force at point c.

To learn more about internal normal force refer to:

https://brainly.com/question/18724171

#SPJ4

the double gear rolls on the stationary left rack r. the rack on the right has a constant velocity of 3 ft/s.

Answers

The angular velocity of the gear is 2.40 rad/s.

What is angular velocity?

Angular velocity is the rate of change in the angle between two bodies or the rate at which an object revolves or rotates around an axis. This displacement in the figure is shown as the angle between a line on one body and a line on the other.

Angles or angular displacements are often expressed in engineering terms as degrees or revolutions (of 360°), and angular velocities as revolutions per minute (rpm). Typically, angles and angular velocities in mathematics and physics are expressed in radians and radians per second, respectively.

Through the following conversion factors, these measurements are related: One radian equals 1/180 (or 0.0175) of a degree, while one revolution per minute (or rpm) equals 1/30 (or 0.0105) of a radian.

Learn more about Angular velocity

https://brainly.com/question/1452612

#SPJ4

Interior exit stairway doors must be able to open on ______ without any special knowledge, effort, or key.

Answers

Interior exit stairway doors must be able to open on  Both sides without any special knowledge, effort, or key.

What is an exit access stairway?

"An exit element that serves to meet one or more means of egress design requirements, such as the required number of departures or exit access travel distance, and is open to yards, courts, or public ways," is the definition of an outdoor exit stairway.

In Here, a building's design can incorporate an interior stairway that leads to the first floor. The pathway leads to a hallway that opens to the outside. Additionally, this corridor must maintain the same level of fire protection.

Therefore, Exit access refers to the section of a route leading to an exit. One instance of an exit access is a hallway on the fifth floor of an office building that connects to an enclosed stairway with a two-hour fire resistance rating and must remain open on all sides.

Learn more about exit stairway doors  from

https://brainly.com/question/15020213
#SPJ1

q-6: for a list of 500 numbers, at most how many iterations would the loop in binary search run to find a number? for example, if this was a guessing game, at most how many guesses would it take using binary search to guess a secret number from 1-500, if after each guess you were told whether your guess was too high or too low or just right? type your answer into the text box.

Answers

For a list of 500 numbers, at most 9 iterations would the loop in binary search run to find a number,

What is iterations?

Iteration is the process of repeatedly performing a step in order to produce a sequence of results that may or may not be bounded. A single iteration of the process is one in which the results serve as the foundation for the subsequent iteration.

Iteration is a common component of algorithms in the fields of mathematics and computer science, along with the related technique of recursion.

Iteration in computing is the process of repeatedly running a set number of times through a block of statements contained within a computer programme. A computer scientist may also refer to that block of statements as a "iteration" if they are said to be iterated.

Learn more about Iteration

https://brainly.com/question/28134937

#SPJ4

analyze the following recursive function. long long factorial(int n) { return n * factorial(n - 1); } invoking factorial(0) returns 0. invoking factorial(1) returns 1. invoking factorial(2) returns 2. invoking factorial(3) returns 6. the function runs infinitely and runs out of memory.

Answers

The function runs infinitely and runs out of memory. when a function enters an infinite loop and continues to execute without stopping, consuming more and more memory as it runs.

What is function ?In programming, a "function" is a block of code that performs a specific task and can be called or executed multiple times. A function may enter an infinite loop if it contains a looping construct, such as a "while" loop, that does not have an exit condition or if the exit condition is never met.When this happens, the function will continue to execute indefinitely, consuming more and more memory as it runs.If a function consumes too much memory, it can cause the system to run out of memory, which can lead to performance issues or even system failures. It is therefore important for programmers to be mindful of the memory usage of their functions and to ensure that they do not enter infinite loops or consume too much memory.

To learn more about function refer :

https://brainly.com/question/21725666

#SPJ4

Confidentiality
deals with ensuring that data is protected against unauthorized access, and if the data are accessed by an authorized user, that the data are used only for an authorized purpose.

Answers

Yes, confidentiality is a key aspect of data security that involves protecting data against unauthorized access and ensuring that it is used only for authorized purposes.

Why is Confidentiality important?

Confidentiality is important because it helps to prevent unauthorized individuals or organizations from gaining access to sensitive or confidential information, which could potentially be used for malicious purposes or to cause harm.

There are several ways to protect the confidentiality of data, including implementing strong access controls, encrypting data at rest and in transit, and regularly updating and patching software to prevent vulnerabilities that could be exploited by unauthorized users.

It is also important to have clear policies and procedures in place to govern how data can be accessed and used, and to ensure that authorized users understand and adhere to these policies.

To Know More About Encryption, Check Out

https://brainly.com/question/28283722

#SPJ4

The pistons in an engine show how gas behavior can be applied to everyday events. Volume, temperature, and pressure of a gas are all involved in the working pistons. How are these factors related in pistons according to the Boyle's law?

Answers

According to Boyle's law, the piston rises, and these two factors—increasing pressure and decreasing volume—are associated in pistons.

Boyle's law, also known as the Boyle-Mariotte law or Mariotte's law, describes the relationship between the volume and pressure of a confined gas (especially in France). Boyle's law states that in a closed system with constant temperature and gas volume, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it fills. PV = k is the algebraic expression for Boyle's law. Volume times pressure equals some constant, which is identical to some constant k, where k is a constant, P is the gas's pressure, and V is the gas's volume. According to Boyle's Law,

Learn more about Boyle's law from

brainly.com/question/1696010

#SPJ4

Determine the disruptive critical voltage, The visual corona inception voltage and
the power loss in a line due to corona, both under fair weather condition as well as
stormy weather condition for a 200km long 3 phase, 132kv line consisting of
conductors of diameter 1.04cm arranged in an equilateral triangle configuration with
4m spacing. The temperature of the surroundings is 50°c and the pressure is 750torr.
The operating frequency is 60Hz.
Take [The irregularity factor Mo-0.85, Mv-0.72]

Answers

The lowest phase-to-neutral voltage at which corona forms is known as the critical disruptive voltage. Vc represents it. Consider the following two parallel conductors with a distance d between them and a radius of r. Let V represent the voltage at the neutral phase.

In transmission lines, what is the visual critical voltage?

Accordingly, the visual critical voltage is the lowest phase-neutral voltage at which the visual corona, or the development of the faint light glow of violet color all along the transmission line conductors, commences.

Corona's impact on conductor performance?

Electrical surface gradients and performance of a conductor are influenced by its voltage, diameter, and shape, as well as by contaminants like dust and water drops and surface abnormalities like scratches.

To know more about voltage visit :-

https://brainly.com/question/13521443

#SPJ1

Thinking Critically and Solving Problems
Posttest
Which step comes first in the decision making process?
A) Analyze the actions.
B) Collect information.
C) List all possible actions.
D) Identify the problem.
G
Submit

Answers

D) Identify the problem step comes first in the decision-making process.

What is decision-making?

In psychology, decision-making (also spelled decision making and decisionmaking) is regarded as the cognitive process resulting in the selection of a belief or a course of action among several possible alternative options. It could be either rational or irrational. The decision-making process is a reasoning process based on assumptions of values, preferences and beliefs of the decision-maker. Every decision-making process produces a final choice, which may or may not prompt action. Research about decision-making is also published under the label problem solving, particularly in European psychological research. Decision-making can be regarded as a problem-solving activity yielding a solution deemed to be optimal, or at least satisfactory. It is therefore a process which can be more or less rational or irrational and can be based on explicit or tacit knowledge and beliefs. Problem solving and critical thinking refers to the ability to use knowledge, facts, and data to effectively solve problems.

To know more about decision-making visit:

https://brainly.com/question/16407152

#SPJ1

. be familiar and be able to distinguish between wave summation and tetanus [complete/incomplete]). how do they differ from one another in terms of their contraction/relaxation properties at the level of percentage of cross-bridges formed and regulatory elements (ca2 )?

Answers

Multiple stimuli can be combined to produce a stronger muscle contraction through summation. Tetanus is the term for when multiple contractions are combined into a single, ongoing contraction.

Why does recovery from tetanus take longer?

While recovery as rest interval increases indicates the return to Ca2+-free parvalbumin, relaxation slows as tetanus duration increases due to the increased saturation of parvalbumin by Ca2+. The relaxation rate in WT muscles remained somewhat faster during all tetanus durations.

Why did the tetanus muscle reaction differ from the summation muscle response?

Tetanus is more tense because the buildup of calcium ions and newly created cross-bridges will make the contraction stronger over time.

To know more about contraction visit:-

https://brainly.com/question/2669219

#SPJ4

consider the two different heuristics shown in the table above, for the graph used in the previous questions (shown above as well). answer the following true/false statements - just type t for true and f for false. 'h1' is admissible 'h1' is consistent 'h2' is admissible 'h2' is consistent 'h1' is better (dominating) than 'h2'

Answers

'h1' is admissible 'h1' is consistent 'h2' is admissible 'h2' is consistent 'h1' is better (dominating) than 'h2'  is True

What is Heuristics?Any approach to problem solving or self-discovery that uses a practical method that is not assured to be ideal, perfect, or rational but is nevertheless adequate for achieving an immediate, short-term goal or approximation is known as a heuristic or heuristic methodology. Heuristic methods can be used to expedite the process of obtaining a workable solution in situations when it is impossible or impractical to discover an ideal one. Heuristics are thought of being mental'shortcuts' that lessen the cognitive strain of decision-making.Heuristic examples include trial and error, applying a rule of thumb, or making an educated assumption.Heuristics are tactics that have been developed from prior encounters with challenges that are comparable. However, it can also result in systematic errors.

To learn more about Heuristics  refer to:

https://brainly.com/question/9008084

#SPJ4

In selecting a production facility location, labor supply would be most important to which of the following?
Jewelry manufacturer
Paper mill
Software designer
Steel manufacturer

Answers

In selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.

What is Labor supply?

Labor supply may be defined as the number of persons willing to work at different wage rates. It depends upon the existing wage rate and is measured in terms of man-days.

Manufacturing or production refers to the process of turning raw materials or parts into finished goods through the use of tools, human labor, machinery, and chemical processing. It requires a regular labor supply in terms of production.

Therefore, in selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.

To learn more about Software designer, refer to the link:

https://brainly.com/question/26135704

#SPJ1

During the synthesis of Indanthrene scarlet several sequential reactions take place in the same reaction flask. In the space provided below draw out the sequential reactions and list the name of the functional group formed at each step.

Answers

Sequential reactions are a series of linked reactions in which the output of one reaction serves as the starting material for another.

What is sequential mechanism?

Sequential reactions are series of connected reactions where the outcome of the first reaction serves as the starting material for the second reaction. In crucial industrial processes like the chlorination of methane, sequential reactions take place.

The times when each chemical species reaches its peak were calculated using an analysis of a generalized sequence of three sequential reactions. Each species' differential rate laws were solved in order to ascertain the concentration of each species as a function of time.

Each solution produced the chemical species' concentration curve. Through slope-analysis, it was discovered that the concentration curves of species A1 and A2 had distinct maxima.

The concentration curve of the final product, A3, was approaching a limit but lacked a clear maximum.

To learn more about sequential reaction refer to:

https://brainly.com/question/934753

#SPJ4

if the time set for trial for ignition (tfi) is exceeded, the ignition control module places the furnace in lockout.

Answers

To unlock your furnace from lockout, you must follow a reset method.

What does the furnace's ignition control module do?

A crucial component of your furnace is the ignition control module. In comparison to the standing pilot light present in earlier gas furnace types, it reliably powers the furnace blower.

What might result in a furnace's ignition failing?

If an air filter in a furnace becomes clogged for safety concerns, the furnace will no longer ignite. So it makes sense to check the air filter if your furnace won't ignite. If it appears to be choked up, this is probably where the issue is coming from.

To know more about furnace visit:-

https://brainly.com/question/14855788

#SPJ4

engineered triply orthogonal pyrrolysyl-trna synthetase/trna pairs enable the genetic encoding of three distinct non-canonical amino acids.

Answers

Triply orthogonal pyrrolysyl-tRNA synthetase/tRNA pairs are a type of engineered genetic tool that can be used to encode three distinct non-canonical amino acids into proteins.

More about Amino acids :
These tools consist of three components: a pyrrolysyl-tRNA synthetase (PylRS) enzyme, a tRNA carrying a non-canonical pyrrolysyl amino acid, and a modified tRNA carrying a canonical amino acid. Together, these components enable the addition of the non-canonical amino acids in place of the canonical amino acids, thus allowing the creation of proteins with novel sequences and properties. These tools have been used to study protein function and to create synthetic proteins with novel properties, such as increased stability or enhanced binding affinity.

To know more about Amino acids
https://brainly.com/question/28409615
#SPJ4

engineers may issue subjective and partial statements if such statements are in writing and consistent with the best interests of their employers, clients or the public.

Answers

If the claims are made in writing and are in the best interests of their employers, clients, or the general public, engineers are permitted to make subjective and partial statements. False

Anyone who purchases goods, services, products, or ideas from a seller, vendor, or supplier in exchange for money or another advantageous compensation is referred to as a customer. This phrase includes business, economics, and sales. The name "client" comes from the Latin word "clients'," which means "to incline" or "to bend." It has to do with the sentimental notion of ending things. It is generally accepted that people only make frequent adjustments when they are driven by fear or greed. Since gaining a customer is a one-time occurrence, professionals that deal with special issues are more likely to draw long-term clients than transient ones. Long-term customers make purchases based on factors other than price and value, in contrast to regular customers.

Learn more about clients from

brainly.com/question/1286522

#SPJ4

is it possible to assign logic levels so that a device with the transfer characteristics shown would serve as an inverter?

Answers

Is it possible to apply logic levels to a device with the transfer properties listed so that it can function as an inverter? If so, what are the input, output, low, high, and noise margins (VIL, VOL, VIH, and VOH)? (NML and NMH)

The exact same number of elements from Y are assigned to each element of X via a mathematical function from a set X to a set Y. Two Persian mathematicians named Al-Biruni and Sharaf al-Din al-Tusi are credited with providing the first known treatment of the idea of function. Functions were first used to describe the idealized relationship between two varying quantities. For instance, time affects a planet's position. Historical development of the concept coincided with the invention of infinitesimal calculus at the end of the 17th century, and the functions taken into account were differentiable until the 19th century.

Learn more about functions from

brainly.com/question/11624077

#SPJ4

Other Questions
In some jurisdictions, minors who become ____ means that they cannot void a contract, despite their apparent minority. Ratification. personality is best defined as an individual's group of answer choices characteristic pattern of thinking, feeling, and acting. most noticeable characteristics. biologically inherited temperament. hidden thoughts and emotions. true/false a better way to repeatedly perfrom an operattion is to write the statements for the task once andf then place the statements ina lopp that will repeat the statments as many times as necacsery if you apply demorgan's theorem to the expression overbar(overbar((overbar(a) overbar(b))) (overbar(c d))), you get: if we use a to represent the cations (in blue) and x to represent the anions (in green), what is the empirical formula of this ionic compound? which halogen forms the weakest bond to carbon? rev: 12 08 2020 qc cs-243801 multiple choice f cl br i What type of insurance IS NOT REQUIRED by the Government? Thinking Critically and Solving ProblemsPosttestWhich step comes first in the decision making process?A) Analyze the actions.B) Collect information.C) List all possible actions.D) Identify the problem.GSubmit To what extent should the following have been aware of the potential danger of Hitler: a) German moderates b) foreign governments Matilda has written a play, and while she does hope that it entertains the audience, her main goal is to spur them to take action to help preventglobal warming. What theory of theater does Matilda's work most resemble?O A.O B.O c.O D.Poetics TheoryDionysus TheoryTheatre of CrueltyEpic Theater Here are the recent financial statements for Collingdale Industries:2022 Income StatementSales 2,000COGS 1,500EBIT 500Interest expense 20Taxable income 480Taxes 192Net Income 2882017 Balance SheetCash 100Accounts payable 150Accounts receivable 70Total current liabilities 150Inventory 130Total current assets 300Long-term debt 250Common stock 100Fixed assets 700Retained earnings 500Total stockholders equity 600Total 1000Total 10002017 Statement of Cash FlowsOperating activities:Net Income 288Depreciation 70Change in accounts receivable 30Change in inventory (60)Change in accounts payable 20Cash flow from operating activities 348Investing activities:Capital expenditures (250)Cash flow from investing activities (250)Financing activitiesRepayment of borrowing (18)Cash flow from financing activities (18)A) Assume that future free cash flow will grow at 4% per year and their cost of capital is 14%, and estimate the fair market value (i.e., the enterprise value) as of year-end 2022. Enterprise value =B) Estimate the firms stock price, if there are 100 shares outstanding. Stock Price= Ron refills the oil in his car using a funnel. The upper rim of the funnel has a diameter of 8 inches. What is the rim's radius? Why does Gwendolyn Brooks use diction such as "we/ real cool'* and we/ strike straight" in herpoem "'We Real Cool'?A.to convey the teenagers' attitude and show of toughnessB.to convey the teenagers' wish to play pool rather than focus on academicsC.to convey the teenagers* rebellion against their parents and teachersD.to convey the teenagers insecurity and their desire to be at school Use the formula y = mx + b and use point slope form to write an equation for a line given with the given information. Anita is a wonderful baker and can bake 10 cakes in a day, but then has no time left to make cookies. If she bakes only cookies, she can make 200 cookies in a day. John can make equally delicious cakes and cookies but can only make seven cakes or 100 cookies in a day. Based on this information, which of the following statements is true?A) Anita has the comparative advantage in the production of cakes.B) John has the comparative advantage in the production of cakes.C) John has the absolute advantage in the production of cookies.D) Anita has the comparative advantage in the production of both cakes and cookies. Solve the following system of equations graphically on the set of axes below.y=- 5/2 x-6x - y= -1Plot two lines by clicking the graph.Click a line to delete it. I NEED HELP!!!! Use the graph of the polynomial equation y=x^4-10x + 16 to describe its concavity. How many points of inflection does this curve have? tiberius played the fox with the senate of rome and how fabius maximus cropped his ears for his cunning. What is the breadth of perimeter=50 ft and Length=15ft Young,s double-slit experiment underlies the instrument landing system used to guide aircraft to safe landings at some airports when the visibility is poor. Although real systems are more complicated than the example described here, they operate on simple principles. A pilot is trying to align her plane with a runway as suggested in the figure. Two radio antennas (the black dots in the figure) are positioned adjacent to the runway, separated by d=40.0m. The antennas broadcast unmodulated coherent radio waves at 30.0 MHz. The red lines in Figure represent paths along which maxima in the interference pattern of the radio waves exist. (a) Find the wavelength of the waves. The pilot "locks onto" the strong signal radiated along with an interference maximum and steers the plane to keep the received signal strong. If she has found the central maximum, the plane will have precisely the correct heading to land when it reaches the runway as exhibited by plane A. (b) What If? Suppose the plane is flying along with the first side maximum instead as is the case for plane B. How far to the side of the runway centerline will the plane be when it is 2.00 km from the antennas, measured along its direction of travel? (c) It is possible to tell the pilot that she is on the wrong maximum by sending out two signals from each antenna and equipping the aircraft with a two-channel receiver. The ratio of the two frequencies must not be the ratio of small integers (such as 3/4) ). Explain how this two-frequency system would work and why it would not necessarily work if the frequencies were related by an integer ratio.