A filament for a light bulb needs to conduct electricity. Which of the elements listed below might be useful as a light bulb filament? Explain your thinking.

A. Tungsten, W
B. Sulfur, S
C. Bromine, Br

Answer:

0

Explanation:

answer from gauth math

The third quantum number (m) describes the specific orbital within a sublevel. The correct answer is option D.

Quantum numbers are a set of four numbers that describe the properties of an electron in an atom. They specify the energy, position, and orientation of an electron in an atom.

The third quantum number (m) is also called the magnetic quantum number. It describes the orientation of the orbital in space. Each orbital within a sublevel has a different orientation in space, and the magnetic quantum number tells us which orbital we are talking about.

The value of m can range from -l to +l, where l is the second quantum number (the angular momentum quantum number). The value of l determines the number of orbitals in a sublevel, and the value of m determines the specific orbital within that sublevel.

In conclusion, the third quantum number (m) describes the specific orbital within a sublevel. It tells us how the orbital is oriented in space, and it can have values ranging from[tex]\rm -l \ to +l[/tex], where l is the second quantum number.

Option D is the correct answer.

Learn more about quantum number here:

https://brainly.com/question/32116992

#SPJ4

Explanation:

here's the molecule you were looking for

Answer:

yea all the answers are true

Redox reaction is the transfer of the electron from one species to another. All of the three statements are true about the redox reaction.

A redox reaction is a type of chemical reaction in which the electrons are gained and lost by a species. The positive EMF of the cell results in spontaneous and will move the reaction in the forward direction.  

In a redox reaction, the cathode reaction is comparatively more negative than the reduction potential present at the anode.

Therefore, option E. All I, II, and III are true.

Learn more about redox reaction here:

https://brainly.com/question/13076860

Answer:

[tex]\boxed {\boxed {\sf 0.757 \ atm}}[/tex]

Explanation:

We are asked to find the pressure of a gas given a change in volume. Since the temperature remains constant, we are only concerned with volume and pressure. We will use Boyle's Law, which states the volume is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the oxygen gas occupies a volume of 18.7 liters at a pressure of 1.19 atmospheres.

[tex]1.19 \ atm * 18.7 \ L = P_2V_2[/tex]

The gas expands to a volume of 29.4 liters, but the pressure is unknown.

[tex]1.19 \ atm * 18.7 \ L = P_2 * 29.4 \ L[/tex]

We are solving for the new pressure, so we must isolate the variable [tex]P_2[/tex]. It is being multiplied by 29.4 liters. The inverse operation of multiplication is division. Divide both sides of the equation by 29.4 L.

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =\frac{ P_2 * 29.4 \ L}{29.4 \ L}[/tex]

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =P_2[/tex]

The units of liters cancel.

[tex]\frac {1.19 \ atm * 18.7 }{29.4 } =P_2[/tex]

[tex]\frac {22.253}{29.4 } \ atm = P_2[/tex]

[tex]0.7569047619 \ atm =P_2[/tex]

The original measurements all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place. The 9 in the ten-thousandth place to the right of this place tells us to round the 6 up to a 7.

[tex]0.757 \ atm \approx P_2[/tex]

The pressure of the gas sample is approximately 0.757 atmospheres.

According to Boyle's law, for a given mass of ideal gas, pressure of gas is inversely proportional to the volume of gas, Provided the Temprature remains constant.

[tex]\implies \sf P_1 V_1 = P_2 V_2 \\ [/tex]

[tex]\implies \sf 1.19 \times 18. 7= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf 22.253= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf P_2 = \dfrac{22.253}{29.4} \\[/tex]

[tex]\implies \underline{ \red{\boxed{ \bf P_2 \approx0.756 \: atm }}} \\[/tex]

Answer:

8.65 atm

Explanation:

Using ideal law equation;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (Latm/molK)

T = temperature (K)

According to the information given in this question;

V = 18.0 L

n = 6.20 moles

R = 0.0821 Latm/molK

T = 33°C = 33 + 273 = 306K

P = ?

Using PV = nRT

P × 18 = 6.20 × 0.0821 × 306

18P = 155.76

P = 155.76/18

P = 8.65 atm

Answer

Accordingly the order of electronegativity of the given elements would be: Fluorine > Chlorine > Bromine > Iodine. ( Fluorine has the highest electronegativity.)

Answer:

Explanation:

Medicare  

United states program for people who are older than 60

Answer: The silver metal was OXIDIZED.

Explanation:

OXIDATION is defined as loss of electrons and increase in oxidation number of an atom.

Oxidation number is the charge on an ion in an ionic compound or the charge that an atom in a covalent compound would have it it were ionic. There are basic rules governing oxidation number, they include:

--> the oxidation number of elements in their free states is ZERO. Example O2, Cl2,Na, Al, Ag.

-->The oxidation number for an ion is the same as the size and sign of the charge on the ion. For example the oxidation number of Zn2+ is +2.

--> the sum of all the oxidation numbers of the elements in a compound is zero.

--> oxidation numbers are always written with either a positive or a negative sign.

On the other hand, reduction is the opposite of oxidation. As oxidation is taking place, reduction is also taking place. Reduction involves:

--> Gain of electron and

--> decrease in oxidation number

From the question, the silver metal had ZERO as it's oxidation number because it's in free state. After being exposed to oxygen to form silver oxide, the oxidation number became +1.

Since there is an increase in the oxidation number, the silver metal was OXIDIZED

Answer:

21.4g of HBr is the minimum mass that could be left over.

Explanation:

Based on the reaction:

HBr + NaOH → NaBr + H2O

1 mole of HBr reacts per mole of NaOH

To solve this question we need to find the moles of both reactants. If moles NaOH > moles HBr, the difference in moles represents the minimum moles of HBr that could be left over because this reaction is 1:1. Using the molar mass we can find the minimum mass of HBr that could be left over, as follows:

Moles NaOH -40.0g/mol-

17g * (1mol/40.0g) = 0.425 moles NaOH

Moles HBr -Molar mass: 80.91g/mol-

55.8g * (1mol/80.91g) = 0.690 moles HBr

The difference in moles is:

0.690 moles - 0.425 moles =

0.265 moles of HBr could be left over

The mass is:

0.265 moles * (80.91g/mol) =

We measured the Fe(II) reduction of one of the Co(III) complexes by water at a rate of about 0.545 kJ/mol (to three significant figures).

Calculating a Reaction's Activation Energy A reaction's rate is influenced by the temperature at which it is carried out. The molecules travel more quickly and clash more frequently as the temperature rises. Moreover, the molecules contain greater kinetic energy.

We can use the Arrhenius equation to calculate the reaction's activation energy:

k = A × exp(-Ea/RT)

When the activation energy Ea, the rate constant k, the gas constant R, and the temperature T in Kelvin are all present.

Finding the natural logarithm of the equation's two sides results in:

ln(k) = ln(A) - (Ea/RT)

This equation can be rearranged to take a linear form:

ln(k) = (-Ea/R) × (1/T) + ln(A)

y = mx + b, where (1/T) is x, (-Ea/R) is the slope, and ln(A) is the y-intercept, has the form of a linear equation.

We can get the slope of the line using the given data:

slope = (-Ea/R) = (ln(k2/k1)) / (1/T2 - 1/T1)

where the rate constants for temperatures T1 and T2, respectively, are k1 and k2.

substituting the specified values:

k1 = 0.054s⁻¹ at 293 K

k2 = 0.100s⁻¹ at 298 K

T1 = 293 K

T2 = 298 K

slope = (-Ea/R)

= (ln(0.100/0.054)) / (1/298 - 1/293)

= 65.5 kJ/mol

Therefore, the activation energy of the reaction is:

Ea = slope * R = 65.5 kJ/mol × 8.314 J/mol-K = 545 J/mol

To know more about molecules visit:-

https://brainly.com/question/15532626

#SPJ1

Answer:

Two methods which help us to conserve water are:

Sprinkler irrigation system: this irrigation has an arrangement of vertical pipes with rotating nozzles on the top. It is more useful in the uneven and sandy land where sufficient water is not available.

Drip irrigation system: this irrigation system has an arrangement of pipes or tubes with very small holes in them to water plants drop by drop just at the base of the root. It is very efficient as water is not wasted at all.

Taking into account its definition, the correct answer is option D) Chromatography.

Chromatography is a method that allows the separation, identification and determination of chemical components in complex mixtures. By means of a chromatography it is possible to separate analytes that are very similar to each other in terms of their physico-chemical properties.

For the separation to occur, the principle of selective retention is used, which consists of the different behavior of the components of a mixture on a specific support (such as paper, a gas, a liquid) and a flowing liquid or gaseous phase. through the bracket.

In other words, there is a stationary phase immobilized on a support and a mobile phase that will drag the sample through the stationary phase. During this process, each component of the sample will move according to its own physicochemical characteristics. The general concept will be that those components that prefer the stationary phase are more retained, while those that prefer the mobile phase will move faster.

In summary, the components of the sample are distributed between two phases of different nature, as a consequence of the speed variation that is established when being dragged by a mobile, liquid or gaseous phase, through a stationary, solid or liquid phase.

Finally, the correct answer is option D) Chromatography.

Learn more about chromatography: https://brainly.com/question/15057878?referrer=searchResults

Answer:

0.3323

Explanation:

GIven that:

Density of the metal = 10.6 g/cm^3

atomic weight = 176.8 g/mol

atmic radius = 0.130 nm

values of a and c = 0.570 nm and 0.341 nm respectively

For us to determine the atomic packing factor, we need to first determine the volume of all spheres (Vs) and the volume of unit cell (Vc).

However, the number of atoms  in the unit cell (n) can be computed as:

[tex]n = \dfrac{\rho * V_c *N_A}{A} \\ \\ n = \dfrac{(10.6) * (5.7)^2 (3.41)*(10^{-24}) *(6.022*10^{23})}{176.8}[/tex]

n = 4.0

Thus, the number of atoms in the unit cell is 4

∴

The atomic paking factor (APF) is calculated by using the formula:

[tex]\dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *R^3 }{a^2 *c} \\ \\ \\ \dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *(1.30*10^{-8})^3 }{(5.70*10^{-8})^2 *(3.41*10^{-8})}[/tex]

= 0.3323

Answer:

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

Explanation:

Hydration is the process by which anhydrous CuSO4 acquires molecules of water of crystalization to form the pentahydrate.

The water of crystalization becomes attached go the crystals of the CuSO4 to form the hydrated salt.

Beginning with solid anhydrous CuSO4 we have;

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

2.96 × 10²³ molecules is required if Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction

According to this question, hydrochloric acid (HCl) reacts with magnesium metal (Mg) to produce magnesium chloride and hydrogen has as follows:

2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)

Where; Mg = 24g/mol

mole = 5.9/24

mole = 0.246mol of Mg

To convert mole to number of molecules, we multiply number of moles by 6.02 × 10²³ (Avogadro's no.)

Hence, number of molecules of HCl required is 0.492mol × 6.02 × 10²³

= 2.96 × 10²³ molecules of HClHCl

Learn more: https://brainly.com/question/14948089

Answer:

Livermorium is a radioactive, artificially produced element about which little is known. It is expected to be a solid and classified as a metal. It is a member of the chalcogen group. Livermorium has four isotopes with known half-lives, all of which decay through alpha decay

Answer:

Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.

Some symptoms are:

Fatigue, bone pain, headaches.

Nausea, vomiting, constipation, decrease in appetite.

Forgetfulness.

Lethargy, depression, memory loss or irritability.

Muscle aches, weakness, cramping and/or twitches.

Answer:

There are many reagents.

1. Use acidified potassium permanganate solution

2. Use acidified potassium dichromate solution

3. Fehling solution.

4. Silver/ oxygen at 500°C

5. Copper/ oxygen at 300°C

6. Lucas reagent ( anhydrous zinc and conc. hydrochloric acid)

Explanation:

Observations:

[with acidified potassium permanganate solution]

» Ethanol : The purple solution turns colourless.

» 2-methyl-2-propanol : no observable change.

[with acidified potassium dichromate solution]

» Ethanol : orange solution turns green

» 2-methyl-2-propanol : no observable change.

[Fehling solution]

» Ethanol : a white precipitate is formed

» 2-methyl-2-propanol : no observable change

Answer:

Explanation:

nFeSo4=3.36/152

nkmno4=1/5nFeSO4

V=17.68 ml

Calories, we know that fat burn is calories.

Answer:

48.67 seconds

Explanation:

From;

1/[A] = kt + 1/[A]o

[A] = concentration at time t

t= time taken

k= rate constant

[A]o = initial concentration

Since [A] =[A]o - 0.75[A]o

[A] = 0.056 M - 0.042 M

[A] = 0.014 M

1/0.014 = (1.1t) + 1/0.056

71.4 - 17.86 = 1.1t

53.54 = 1.1t

t= 53.54/1.1

t= 48.67 seconds

Hence,it takes 48.67 seconds to decompose.

Let's consider the neutralization reaction between HCl and NaOH.

NaOH + HCl ⇒ NaCl + H₂O

To determine the pH of the resulting mixture, we need to determine the reactant in excess. First, we will calculate the reacting moles of each reactant.

NaOH: 0.0500 L × 0.500 mol/L = 0.0200 mol

HCl: 0.0750 L × 0.250 mol/L = 0.0188 mol

Now, let's determine the reactant in excess and the remaining moles of that reactant.

                    NaOH    +     HCl ⇒ NaCl + H₂O

Initial           0.0200       0.0188

Reaction    -0.0188       -0.0188

Final         1.20 × 10⁻³          0

The volume of the mixture is 50.0 mL + 75.0 mL = 125.0 mL. Then, 1.20 × 10⁻³  moles of NaOH are in 125.0 mL of solution. The concentration of NaOH is:

[NaOH] = 1.20 × 10⁻³ mol/0.1250 L = 9.60 × 10⁻³ M

NaOH is a strong base according to the following equation.

NaOH ⇒ Na⁺ + OH⁻

The concentration of OH⁻ is 1/1 × 9.60 × 10⁻³ M = 9.60 × 10⁻³ M.

The pOH is:

pOH = -log [OH⁻] = -log 9.60 × 10⁻³ = 2.02

We will calculate the pH using the following expression.

pH = 14.00 - pOH = 14.00 - 2.02 = 11.98

The pH is 11.98. Since pH > 7, the solution is basic.

You can learn more about neutralization here: https://brainly.com/question/16255996

Explanation:

P1V1/T1 = P2V2/T2

=((390.89×313.9)/76.6)×((718.3×V2)/154.2)

= (122700.371/76.7) × ((718.3×V2)/154.2)

make V2 the subject of the formula...

V2 =(122700.371×154.2)/(76.6×718.3)

V2 =18920397.21/55021.78

V2 = 343.87

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

2,3,3-trimethylhexane

Explanation:

IUPAC nomenclature provides a universally acceptable method of naming organic compounds from its structure.

According to this system of nomenclature;

A comma is used to separate two numbers.

A hyphen is used to separate a number from a letter.

Applying these rules, the name of the compound shown in the question should be written as 2,3,3-trimethylhexane.

Answer:

a. is released in the process

Explanation:

In fusion reaction the nucleus is unstable so it releases its binding energy resulting in decreasing its mass so it becomes more stable.