A gas occupies a volume of 2.45 L at a pressure of 1.03 atm. What volume will the
gas occupy if the pressure changes to 0.980 atm and the temperature remains
unchanged? Show your work in the space below. *​

Answer:

0.03

Explanation:

22.8 g Ba(OH)2 (1 mol Ba (OH)2/ 171.34 g) = 0.133 mol Ba (OH)2

77.2 g H2O (1 mol H2O/18 g) = 4.29 mol H2O

X= molar fraction= mol Ba(OH)2/ mol total

X= 0.133/ (0.133+4.29) = 0.03

0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.

The ratio of the number of moles of one component of a solution or other mixture to the total number of moles representing all of the components.

Moles of [tex]Ba(OH)_2[/tex]

Moles = [tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{22.8 g Ba(OH)_2}{171.34 g}[/tex]

= 0.133 mol [tex]Ba (OH)_2[/tex]

Moles of [tex]H_2O[/tex]

[tex]Moles = \frac{mass}{molar \;mass}[/tex]

[tex]Moles = \frac{77.2 g H_2O}{18 g}[/tex]

= 4.29 mol [tex]H_2O[/tex]

The mole fraction of [tex]Ba(OH)_2[/tex]

[tex]\frac{mol Ba(OH)_2}{total \;mol}[/tex]

= 0.03

0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.

Learn more about the mole fraction here:

https://brainly.com/question/8076655

#SPJ2

Answer:

0 °C and 1 Atm,

Explanation:

Standard Temperature and Pressure. Standard temperature is equal to 0 °C, which is 273.15 K.

Standard Pressure is 1 Atm, 101.3kPa or 760 mmHg or torr

Answer:

The Sun powers life on Earth; it helps keep the planet warm enough for us to survive. It also influences Earth’s climate: We know subtle changes in Earth’s orbit around the Sun are responsible for the comings and goings of the past ice ages. But the warming we’ve seen over the last few decades is too rapid to be linked to changes in Earth’s orbit, and too large to be caused by solar activity

Explanation:

Answer:

2 carbon atoms/molecules are present on the reactant side.

hope it helps!

Answer:

CH3−CO−O−CH3

Explanation:

i just took the test

Answer:

b

Explanation:

Electromagnetic waves are waves that have no medium to travel whereas mechanical waves need a medium for its transmission.

Hey there!

P₄ + Cl₂ → PCl₃

First, let's balance Cl.

There are 2 on the left, and 3 on the right.

To balance this, let's put a coefficient of 3 in front of Cl₂ and a coefficient of 2 in front of PCl₃.

P₄ + 3Cl₂ → 2PCl₃

Now we have 6 on the left and 6 on the right.

Next, let's balance P.

There are 4 on the left and 2 on the right.

Let's change the coefficient in front of PCl₃ from 2 to 4.

P₄ + 3Cl₂ → 4PCl₃

There are now 4 P on each side.

However, now Cl is unbalanced, with 6 on the left and 12 on the right.

We can change the coefficient in front of Cl₂ from 3 to 6.

P₄ + 6Cl₂ → 4PCl₃

So now, we have 4 P on each side and 12 C on each side.

This is our final balanced equation.

Hope this helps!

Answer:

1:1

Explanation:

Took test

Answer:

The correct answer is  

[CH4][H2O]/[CO][H2]3

Option 3 is correct

Explanation:

Step 1: Data given

For the equation aA + bB ⇆ cC + dD

The equilibrium constant is [C]^c * [D]^d / [A]^a*[B]^b

Step 2: Calculate the equilibrium constant Kc

CO+3H2⇌CH4+H2O

Kc = [H2O][CH4] / [CO][H2]³

The correct answer is  

[CH4][H2O]/[CO][H2]3

Option 3 is correct

Answer:

jeez thats some calculus stuff right there im pretty sure its b

Explanation:

Answer:Most cars have the visible outer panel, and supporting structure, made from steel. Some use aluminium, at least one series-produced model had magnesium doors, and there are also doors where the visible parts are plastic or fiberglass, with some sort of metal inside for strength.

Explanation:

Answer:

Most cars have the visible outer panel, and supporting structure, made from steel. Some use aluminium, at least one series-produced model had magnesium doors, and there are also doors where the visible parts are plastic or fiberglass, with some sort of metal inside for strength.

Answer:

el nino: the boy

la nina: the girl

Explanation:

Answer:

el nino is dinosour la nino is fishcat

Explanation:

Answer:

C

Explanation:

The answer is always C

Answer:C. Concave mirror

Explanation:

When the surface of a mirror curves inward, like the inside of a bowl, it is called c. Concave mirror.

Answer:

Limiting reactant is CS2

% yield = 131.8 %

Explanation:

Using the alanced equation given, Mole ratio of C to CS2 is 1 : 5.

That is, for every 1 mole of CS2 used, 5 moles of Carbon is produced.

35g of CS2 --- [tex]\frac{35}{76.14}[/tex] moles

= 0.4597 moles

⇒ mass of C produced = 5 × 0.4597 × 12 g/mol

= 27.6 g of C.

Percentage yield (%) = [tex]\frac{actual- yield}{theoretical- yield}[/tex]

= [tex]\frac{36.4}{27.6} * 100[/tex] =131.9%

Answer:

1 mole Of Helium = Weight of Helium/4Weight of Helium = 1*4 = 4 grams 1 mole of Helium contains 6.023*10²³ ( Avogadro number) atoms. Number of moles of in 4 grams of Hydrogen 4 grams is = given weight / molecular weight of Hydrogen (H₂) = 4/2 =2 Number of atoms/molecules in 2 moles of Hydrogen is (2*6.023*10²³) atoms. = 12.046*10²³ atoms.

(Hope this helps)

The number of atoms in 2 moles of helium is 1.204×10²⁴ atoms

From Avogadro's hypothesis,

1 mole of any substance = 6.02×10²³ atoms

Thus,

1 mole of helium = 6.02×10²³ atoms

With the above information in mind, we can obtain the number of atoms in 2 moles of helium as follow:

1 mole of helium = 6.02×10²³ atoms

Therefore,

2 moles of helium = 2 × 6.02×10²³ atoms

2 moles of helium = 1.204×10²⁴ atoms

Thus, we can conclude that 2 moles of helium contains 1.204×10²⁴ atoms

Learn more: https://brainly.com/question/24848191

Answer:

Li has fewer protons than Li+

Answer:

NeHe

Explanation:

Atomic Mass: 24.182302

Number: 18

I don't know, I just made it up.

Answer:

Gamma Rays.

Explanation:

Gamma-ray photons have the highest energy in the EMR spectrum and their waves have the shortest wavelength.

the carbon cycle is the process in which carbon travels from the atmosphere into organisms and the earth and then back into the atmosphere

Answer:

c

Explanation:

Answer:

b

Explanation:

Answer:

Dark matter also called baronic matter is the matter that makes up 27% of the universe.

In 1933 it was determined as that mass that cannot be seen, that is, the non-visible mass of outer space.

Dark matter also plays a central role in the formation of structures and the evolution of galaxies and has measurable effects on the anisotropy of cosmic microwave background radiation. The composition of this matter is unknown today.

The dark matter component has considerably more mass than the "visible" component of the Universe.

Explanation:

There are certain researchers who say that the appearance of dark matter was before the appearance of the big bang.

A relevant fact of this matter is that dark matter exerts gravity, and that gravity affects the movements of objects.

Despite the fact that nothing is known about its origin, astronomers have amply demonstrated that dark matter plays a determining role in the formation of galaxies and galactic clusters, which could not maintain their cohesion without its existence, but many doubt that it is the remainder / remnant or product of a big bang.

Answer: C

# The main reason why the reaction above can not be balanced is:

   This chemical reaction SO2 + H2O -> H2SO2 is not correctly written.

    It must be: SO2 + H2O -> H2SO3

Explanation:

Note 1:

H2SO2 can be produced by the other chemical reaction:

2H2O + SCl2 -> 2HCl + H2SO2

....

Note 2: Answer A is false

As you can see in the reaction  SO2 + H2O -> H2SO3, the oxygen atoms are in two molecules on one side, but one in the other - However, this reaction is written correctly.

Note 3: Answer D is false

Of course the Sulfur atom must be placed in different places: in reactant and product molecules.

Note 4: Answer B is false

There are different kinds of chemical reactions, and this is normal that there are more molecules on one side than on the other.

The answer is C

The correct way to balance the reaction, would be to write it as SO2 + H2O →  H2SO3

Answer A is incorrect.

The oxygen atoms in the reaction SO2 + H2O -> H2SO3 are in two compounds on one end but on the other, it is in just one.

Answer D is wrong.

The sulfur atom has to be in the reactants and the products.

Answer B is not correct.

There are many types of chemical reactions . One side commonly has more atoms than the other.

Answer:

answer: A. all of the living organisms in a specific place at a specific time

Explanation:

Answer:

Water, and other neutral

Explanation:

That means those substances have pH = 7.

When the amount of H+ is more than the amount of OH- in solution, the substance is acidic ( eg.: Lemon juice ). pH < 7

When the amount of H+ is less than the amount of OH- in solution, the substance is basic ( eg.: Baking soda ). pH > 7

Answer:

1) Sound waves are stores as electrical signal in the digital recording.

2) the electrical signal of the digital recording is transcribed and sent to the voice coils.

3) the voice coil changes this electrical signal into varying magnetic fields.

4) The magnetic field pushes and pulls the diaphragm of the speakers.

5) the pushing and pulling of the diaphragm generates sound waves in the speaker.

Answer:

Hey!

Your answer is 45kg.m/s

Explanation:

Using the formula P=M x V

(p=momentum...M=mass...V=velocity)

We do M x V

15 x 3

Which gives us an answer of 45kg.m/s!

HOPE THIS HELPS!!

Answer:

[tex]\frac{1}{6}[/tex]

Explanation:

Molar ratio is defined as the ratio of number of moles of reactants or products in a balanced chemical equation.

In this balanced equation, the number of C6H6 molecules react to form 12 CO2 molecules.

Thus, the molar ratio between C6H6 to  carbon will be equal to 2 moles of  C6H6 divided by 12 moles of CO2

[tex]\frac{2}{12}\\\frac{1}{6}[/tex]

Answer:

unbalanced

Explanation:

Cl and H have an extra atom

- Hope that helps! Please let me know if you need further explanation.

Answer:

Volume = 5.73L

Explanation:

Data;

V1 = 3.75L

P1 = 0.980atm

P2 = 0.641atm

V2 = ?

This question involves the use of Boyle's law, which states that, the volume of a fixed mass of gas is inversely proportional to its pressure provided that temperature remains constant.

Mathematically,

V = kP, k = PV

P1V1 = P2V2 =P3V3=........=PnVn

P1V1 = P2V2

V2 = (P1 * V1) / P2

V2 = (0.980 × 3.75) / 0.641

V2 = 5.73L

The final volume of the gas is 5.73L