When the object with a volume of 15 cm3 is lowered into the water in the graduated cylinder, the new water level will be 11 cm3.
The new water level in the graduated cylinder can be determined by considering the principle of displacement. When the object is lowered into the water, it will displace an amount of water equal to its own volume.
Given that the object has a volume of 15 cm3, it will displace 15 cm3 of water. Since the initial volume of water in the graduated cylinder is 26 cm3, the new water level can be calculated by subtracting the volume of water displaced by the object from the initial volume of water.
Therefore, the new water level in the graduated cylinder will be 26 cm3 - 15 cm3 = 11 cm3.
To summarize, when the object with a volume of 15 cm3 is lowered into the water in the graduated cylinder, the new water level will be 11 cm3.
To know more about graduated cylinder visit:-
https://brainly.com/question/33943611
#SPJ11
How is bleaching powder prepared???
no copied answer!!
Hi there!..
Your answer↓
[tex] \: [/tex]
How is bleaching powder prepared? It is prepared by the action of chlorine gas on dry slaked lime Ca(OH)²[tex] \: [/tex]
[tex] \dag \boxed{\red{\sf{Ca(OH) {}^{2} +cl {}^{2} →CaOCl {}^{2} +H {}^{2} O}}}[/tex]
an ideal gas is cooled from 100 degrees celsius to negative 43 degrees celsius in a sealed container while maintaining constant pressure. read the following statements below, which may or may not be true.1. i. the volume of the gas decreases ii. the average distance between the gas particles decreases iii. the average kinetic energy of the gas particles increases which statement is true?
Based on the given information, the correct statement is: i. The volume of the gas decreases.
When an ideal gas is cooled, its particles slow down and the average kinetic energy decreases. As a result, the particles move closer together, leading to a decrease in volume. This relationship is described by Charles's Law, which states that when the pressure is constant, the volume of an ideal gas is directly proportional to its temperature.
However, it is important to note that the average distance between gas particles (ii) and the average kinetic energy of gas particles (iii) do not increase. Cooling a gas leads to a decrease in both the average distance between particles and their kinetic energy. The decrease in temperature results in a decrease in the average kinetic energy, while the decrease in volume implies a decrease in the average distance between particles.
Therefore, only statement i, "the volume of the gas decreases," is true.
Learn more about volume of the gas here:-
https://brainly.com/question/24189159
#SPJ11
The liquid dispensed from a burette is called ___________.
i. solute
ii. water
iii. titrant
iv. analyte
The liquid dispensed from a burette is called the titrant. A titrant is a solution with a known concentration that is added in a controlled manner to react with the analyte in a chemical analysis. The option C is correct.
The burette is a precise measuring instrument used in titrations to deliver the titrant.In a titration, the analyte is the substance being analyzed or tested. It reacts with the titrant to form a product, and the reaction is monitored to determine the concentration or amount of the analyte.
For example, in an acid-base titration, a solution of known concentration called the titrant is slowly added to the analyte solution until the reaction between the acid and base is complete. The burette allows for precise measurement of the volume of titrant added.The other options given are not accurate in this context. Solute refers to the substance being dissolved in a solvent, while water is a common solvent. Analyte, as mentioned earlier, is the substance being analyzed. The correct term for the liquid dispensed from a burette in a titration is the titrant.
To know more about chemical analysis visit:-
https://brainly.com/question/2625200
#SPJ11
a homogeneous solution contains copper(ii) ions (cu2 ), silver ions (ag ) and potassium ions (k ). you have sodium bromide (nabr) and sodium sulfide (na2s) available to use. what should you add and in what order to separate the three metal ions? ksp (sulfides) ksp (bromides) cus 6.0×10–37 cubr2 soluble ag2s 6.0×10–51 agbr 7.7×10–13 k2s soluble kbr soluble
To separate Cu2+, Ag+, and K+ from the homogeneous solution, add sodium sulfide (Na2S) first to precipitate CuS. Then add sodium bromide (NaBr) to precipitate AgBr. Finally, the remaining solution contains only K+.
To separate the copper (II), silver, and potassium ions from the homogeneous solution, you can employ the following procedure.
Firstly, add sodium sulfide (Na2S) to the solution, resulting in the formation of insoluble copper sulfide (CuS) precipitate due to its low solubility (Ksp = 6.0×10–37). By filtering the solution, the insoluble CuS precipitate can be separated.
Next, introduce sodium bromide (NaBr) to the filtrate, causing the formation of insoluble silver bromide (AgBr) precipitate due to its low solubility (Ksp = 7.7×10–13). By filtering the solution once again, the insoluble AgBr precipitate can be isolated.
Finally, the remaining solution will only contain potassium ions (K+), which do not require further separation steps as potassium salts are highly soluble in water. By following this procedure, effective separation of the copper (II), silver, and potassium ions can be achieved.
Learn more about sodium sulfide here:
https://brainly.com/question/7154441
#SPJ11
at constant temperature, a 144.0 ml sample of gas in a piston chamber has a pressure of 2.25 atm. calculate the pressure of the gas if this piston is pushed down hard so that the gas now has a volume of 36.0 ml.
The pressure of the gas would be 9.0 atm if the piston is pushed down hard to a volume of 36.0 ml.
To solve this problem, we can use Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature.
First, we need to set up the equation: P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Given that the initial volume (V1) is 144.0 ml and the initial pressure (P1) is 2.25 atm, and the final volume (V2) is 36.0 ml, we can plug in the values into the equation:
2.25 atm * 144.0 ml = P2 * 36.0 ml
Next, we can solve for P2 by dividing both sides of the equation by 36.0 ml:
2.25 atm * 144.0 ml / 36.0 ml = P2
P2 = 9.0 atm
Therefore, the pressure of the gas would be 9.0 atm if the piston is pushed down hard to a volume of 36.0 ml.
To know more about pressure refer to
https://brainly.com/question/29341536
#SPJ11
How many grams are in 0.743 mol of al? express your answer to three significant figures.
The molar mass of aluminum (Al) is 26.98 g/mol. To calculate the mass of 0.743 mol of Al, you can use the following steps:
In chemistry, the concept of molar mass allows us to convert between the amount of substance in moles and the mass in grams. The molar mass represents the mass of one mole of a substance. To calculate the mass of a given number of moles of a substance, we multiply the number of moles by the molar mass. In this case, the molar mass of aluminum is 26.98 g/mol. By multiplying 0.743 mol by 26.98 g/mol, we find that the mass of 0.743 mol of aluminum is 20.00414 g.
Since the question asks for the answer to be expressed to three significant figures, we round the result to 20.0 g. Rounding to three significant figures means that the final answer should have three digits, and the last digit is rounded according to the rules of significant figures. In summary, there are 20.0 grams in 0.743 mol of aluminum.
To know more about aluminum visit:
brainly.com/question/20043771
#SPJ11
Why does the second acetyl group enter the unoccupied ring to form diacetylferrocene?
The second acetyl group enters the unoccupied ring to form diacetylferrocene because it is more nucleophilic than the ring that has already been acetylated.
The acetylation of ferrocene is a Friedel-Crafts acylation reaction. In this reaction, an acylium ion, which is a positively charged carbon atom with an oxygen atom bonded to it, attacks an aromatic ring. The aromatic ring donates electrons to the acylium ion, forming a new bond and displacing the positive charge.
In the case of ferrocene, the first acetyl group reacts with one of the cyclopentadienyl rings. This ring becomes less nucleophilic because the positive charge from the acylium ion has been partially delocalized to the ring. The unoccupied ring, on the other hand, is more nucleophilic because it has not been attacked by the acylium ion.
Here is a diagram of the reaction:
Fe + CH3COCl → Fe-O-C(CH3)3 (acetylferrocene)
Fe-O-C(CH3)3 + CH3COCl → Fe-O-C(CH3)2-C(CH3)3 (diacetylferrocene)
The first step of the reaction is the formation of acetylferrocene. In this step, the acetyl chloride reacts with ferrocene to form an acylium ion. The acylium ion then attacks one of the cyclopentadienyl rings, forming acetylferrocene.
The second step of the reaction is the formation of diacetylferrocene. In this step, the acetylferrocene reacts with another molecule of acetyl chloride to form diacetylferrocene. The second acetyl group attacks the unoccupied cyclopentadienyl ring, forming diacetylferrocene.
To learn more about nucleophilic: https://brainly.com/question/28325919
#SPJ11
t. g. draper. a logarithmic-depth quantum carry-lookahead adder. quantum inf. comput., 6(4):351, 2006
The study focuses on an effective addition circuit and incorporates carry-lookahead arithmetic approaches.
The work showed an effective addition circuit that used methods from the traditional carry-lookahead arithmetic circuit. Two n-bit values are input into the quantum carry-lookahead (QCLA) adder, which adds them in O(log n) depth with On supplementary qubits. It typically offered a few variants that add modulo 2n and modulo 2n - 1, as well as in-place and out-of-place versions.
The method of choice incorporated in the past has been the ripple-carry addition circuit with linear depth. Our innovation significantly lowers the cost of addiction while just slightly increasing the number of qubits needed. Current modular multiplication circuits can significantly shorten the run-time of Shor's algorithm by utilising the QCLA adder.
Read more about circuit on:
https://brainly.com/question/26064065
#SPJ4
Complete Question:
Explain the study of t. g. draper. a logarithmic-depth quantum carry-lookahead adder. quantum inf. comput., 6(4):351, 2006.
